XL Reporter Do Not Display Blank Records

hey all,
I've built a standard P&L Budget report in XL Reporter with parameters for each segment of the account code as made possible by patch 02. However, when I uncheck "Do not display blank records," the generated report lists an instance of each account for each segment that I've chosen in the parameters.
The selections for the account segmentation don't seem to filter the accounts themselves, instead they filter the balances of each account. Does anyone know why it only filter's the balances rather than the accounts themselves and ends up repeating the accounts for each segment selected? Is this a bug?
thanks in advance!
Kevin Lee

Hi Kevin,
Seems that noone in this forum can answer your question. Maybe this is related to the fact that the main focus here is the SAP Business One SDK?
In case the question is still open:
I would recommend that you try these forums - which should fit better:
For SAP partners only there's a forum where you can discuss implementation questions etc.:
Got a question about customization / implementation? Maybe ask it in CPSN!
...and here's the SAP Business One Forum in the "SAP Community" (public to anybody):
Re: Got a question about customization / implementation? Maybe ask it in CPSN!
...or you might try your luck with SAP Support?
Bugs should anyway be reported to SAP Support!
HTH
Frank

Similar Messages

RPUAUD00 Reports is not displaying previous records details just new records

Hi Guru,
Need some input, I am trying to get infotype log. I maintain V_T585A/B/C for Infotype 2.
Can you check screen shot of the same and confirm why its not displaying old records .
Regards,
Vijay Agarwal

did you select long term documents? - Long-term documents are used for revision purposes, in other words to find out who changed, deleted or created what and when. check changes of note no. 44206 means, table PCL4 can get pretty large and as a follow up the report RPUAUD00 might take a long time to evaluate the logged changes in the infotype data. Please note that when an archive is selected, then the found archive is read until the record is found. This can take a lot of time (taken into account the access to the file itself), especially with large files. That is currently standard design behavior. But you can run regulary report RPUAUDDL to delete old entries in PCL4. PCL4 contains change documents for Master Data and applicant admin. In PCL4 there are four clusters: LA, LB, SA, and SB. It contains the data created by using the 'write infotype document' function. LX are long-term documents, SX are short-time documents. 'A' stands for employee, 'B' for applicant. The 'write infotype document' function is maintained in tables T585A, T585B, and T585C.

Report is not displayed on the browser

We have a 9iAs Oracle application(built in developer6i(forms and reports) patch12).The database version is Oracle 9.2.0.6.0.My problem is I have a report that is called from the form. If the print_receipt = 'Y', display the report.I have also an afterreport trigger that updates this print_receipt to 'N'.Somehow the afterreport trigger fires before the report is display thus giving a blank pdf output on the browser.My user has new pc and new operating system, Windows XP but they're still using Novell Netware for signing on to the network. Before she does not have any problem displaying the report, she was using Windows NT4 and Novell Netware for signing on to the network.Is there any limitations in Windows XP that interferes with the report? Is this known problem in report's afterreport triggers?Is there a workaround here so the report can be displayed?Thanks for the help.

Hi,
Try this may be it will help.
Go to Iexplorer property - settings - Change (Check for newer version of stored pages to Automatically.
This error is coming because the report runs twice, so the after report trigger is fired before anything is displyed & hance your report is not displayed.
Thanks,
Awadh

Query not displaying all records when execute it first tme

Hello,
i have an issue with the WEBI report.when i run the report first time it's displaying only few records, but when i run the same report second time it's displaying the more records and it's correct.
Could any one tell me why it's not displaying all records when i execute first time.
Thanks in advance for your help.
Regards,
Prathap

Which BOBJ version do you use?
Which kind of data source are you retrieving data from?
Regards,
Stratos

Form does not display all records from table

Hi guys
I modified one form that was based on a signle DB table. I removed certain fields from the table and added some extra fields to that table. Then based on the new table I also modified the form and removed the text items related to old fields in the table and added new text items pointing to the new fields now. II have checked all the new items properties and they have don't seem to be wrong or so. But now the problem is the form does not display all the records from the table. before it used to display all records from the table when qureied but not now. It only certain records from the table containing all new data and also old data but the form does not display other records though I don't see any obvious discrepancy. Remember that the before doing the modifications, I have table back for the old, created another table that contained new records for the new fields, and then I inserted the old records and updated the new table data in the new table with these new table values. So this way I have got my new table. Could someone help why the new modified form fails to display all records from the new table updated table though it display some of them successfully.
Any help will be appreciated.
Thanks

hi
Set the block property of "Query All Records" to "YES"
hope it will work.
Faisal

Why the SQL Monitor report do not display?

Why the SQL Monitor report do not display?
SQL> set serveroutput on
SQL> variable my_rept CLOB;
SQL> BEGIN
2 :my_rept :=DBMS_SQLTUNE.REPORT_SQL_MONITOR();
3 END;
4 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.93
SQL> print :my_rept
MY_REPT
SQL Monitoring Report
SQL>

You can you hint /*+MONITOR*/, and then use this procedure to display the monitor report:
SQL> select /*+ monitor */ *from hr.employees where salary>10000;
SQL> variable my_rept CLOB;
SQL> BEGIN
2 :my_rept :=DBMS_SQLTUNE.REPORT_SQL_MONITOR();
3 END;
4 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:01.21
SQL> print :my_rept
MY_REPT
SQL Monitoring Report
SQL Text
select /*+ monitor */ *from hr.employees where salary>10000
Global Information
Status              : DONE (ALL ROWS)
Instance ID         : 1
Session ID          : 170
MY_REPT
SQL ID              : 4tj5p5m6qrkmp
SQL Execution ID    : 16777216
Plan Hash Value     : 1445457117
Execution Started   : 04/30/2010 10:51:23
First Refresh Time : 04/30/2010 10:51:23
Last Refresh Time   : 04/30/2010 10:51:23
| Elapsed | Other   | Fetch | Buffer |
| Time(s) | Waits(s) | Calls | Gets |
...

Report- not displaying some records in the report

I have a query say q1 based on the query value. I am getting place holder colums obtained from a procedure. based on one of the place holder columns i want to display the data say i have place holder column err_ind if it y. i don't want to display the record in report.
how can i do it ? ur help is much appreciated.

Hi Praveen,
Thanks for the response.
Actually i did debug the program with the help of our technical guys but found nothing wrong in both the quality and the production system. We compared the program in both the systems and it seems to be same. I am exploring this issue. Will update the findings here.
In case anyone has any suggestion please do suggest.
Regards,
Gokul

Report does not display data

I have a crystal XI report that when run will not display data; if the report should be six pages that is the number of pages that will be generated. The problem is that the pages show up as blank. If the blank pages are exported the exported file will contain data, if the report is sent to a printer the report will contain data, but no data is ever displayed on the screen. This report has been loaded on 15 other computer and runs perfectly. Any help would be greatly appreciated. By the way if this user logs in remotely and runs this report it will display data.

A few ideas;
1) Make sure you are working with [SP 6|https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe].
You are on SP 2...
[SP6 msm|https://smpdl.sap-ag.de/~sapidp/012002523100000634032010E/crxir2sp6_rdc_mm.zip]
2) Try different resolutions
3) Try to see if there is an updated video driver
4) Make sure there is a default printer driver installed.
5) Run [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] see if there are any differences in dlls loading on a box that works and the one that does not (CR and non CR dlls).
Ludek
Edited by: Ludek Uher on Feb 22, 2010 10:32 AM

Report is not displaying 'previous day maximum sale' correctly

There is a issue in the report
Based on material and date and displays the previous day maximum sale
The issue is whenever i run the report in give a single Document Date on selection screen it works fine but whenever i run the report in a range it shows the previous date of the range like when i run the report with
Document date - 05.07.2007, its working fine but and showing 04.07.2007 as previous day
when run the report
Document date - 01.07.2007 to 31.07.2007, its displaying 30.07.2007 for all records and not displaying different results based on doc date,
like it should show for 31.07.2007 --- 30.07.2007 and
 30.07.2007 --- 29.07.2007
 29.07.2007 --- 28.07.2007
CODE :-
FORM data_retrieval.
SELECT MSEGMATNR MSEGMBLNR MSEGMENGE MSEGMEINS MSEGCHARG MSEGLGORT MSEGBWART MSEGWERKS MSEGLIFNR MSEGEBELN MSEGBPRME MSEGDMBTR MSEGEXBWR MSEGVKWRT MSEG~SHKZG
 MKPFBLDAT MKPFBUDAT MKPFMBLNR MKPFBKTXT MKPFXABLN MKPFCPUDT MKPFXBLNR MKPFMJAHR
INTO CORRESPONDING FIELDS OF TABLE itab FROM MSEG
JOIN MKPF
ON MSEGMBLNR = MKPFMBLNR
where MSEG~MATNR IN S_MATNR
AND MSEG~WERKS IN S_WERKS
AND MSEG~LGORT IN S_LGORT
AND MSEG~CHARG IN S_CHARG
AND MSEG~LIFNR IN S_LIFNR
AND MSEG~KUNNR IN S_KUNNR
AND MSEG~BWART IN S_BWART
AND MSEG~SOBKZ IN S_SOBKZ
AND MKPF~BUDAT IN S_BUDAT
AND MKPF~BLDAT IN S_BLDAT .
IF ITAB[] IS NOT INITIAL.
select matnr vbeln netwr UMKZWI1_01 fkdat ummenge VKORG VGBEL from s961
into corresponding fields of table IT_S961 FOR ALL ENTRIES IN itab
where matnr = itab-matnr and fkdat < itab-bldat.
ENDIF.
SORT IT_S961 descending BY matnr fkdat ummenge .
LOOP AT itab INTO wa_itab.
 READ TABLE IT_S961 WITH KEY MATNR = WA_ITAB-MATNR BINARY SEARCH.
 IF sy-subrc = 0.
 wa_itab-VBELN = IT_S961-VBELN.
 wa_itab-NETWR = IT_S961-NETWR.
 wa_itab-UMKZWI1_01 = IT_S961-UMKZWI1_01.
 wa_itab-UMMENGE = IT_S961-UMMENGE.
 wa_itab-VKORG = IT_S961-VKORG.
 wa_itab-VGBEL = IT_S961-VGBEL.
 wa_itab-FKDAT = IT_S961-FKDAT.
 ENDIF.
 MODIFY itab FROM wa_itab TRANSPORTING VBELN NETWR UMKZWI1_01 FKDAT UMMENGE VKORG VGBEL.
 CLEAR : wa_itab.
ENDLOOP.

Hi,
Still values are not coming
SELECT matnr fkdat ummenge vbeln vkorg vgbel netwr umkzwi1_01 FROM s961
 INTO CORRESPONDING FIELDS OF TABLE it_s961 FOR ALL ENTRIES IN itab
 WHERE matnr = itab-matnr
 AND fkdat EQ itab-previous_dt.
ENDIF.
sort it_s961 by matnr vbeln fkdat previous_dt ummenge descending .
LOOP AT itab INTO wa_itab.
 READ TABLE it_s961 WITH KEY matnr = wa_itab-matnr BINARY SEARCH.
 IF sy-subrc = 0.
 wa_itab-vbeln = it_s961-vbeln.
 wa_itab-netwr = it_s961-netwr.
 wa_itab-umkzwi1_01 = it_s961-umkzwi1_01.
 wa_itab-ummenge = it_s961-ummenge.
 wa_itab-vkorg = it_s961-vkorg.
 wa_itab-vgbel = it_s961-vgbel.
 wa_itab-fkdat = it_s961-fkdat.
 ENDIF.
 MODIFY itab FROM wa_itab TRANSPORTING fkdat ummenge vbeln netwr umkzwi1_01 vkorg vgbel.
 CLEAR : wa_itab.
ENDLOOP.

Report does not display some data

Hi,
Using:
- Crystal Reports 2008 SP3 as development platform.
- Visual Studio 2008 to launch the crystal report.
- SQL Server 2005 SP3 as database
Crystal Report:
- rpt file has been set up for a couple of months, working fine uptill last friday
- dataset comes from a SQL Server stored procedure with some parameters. Executing this stored procedure with these parameters, returns the correct result set
- showing the report using the Crystal Reports Viewer, some fields remain blank since the beginning of this week. Why does the report does not show all the data that is in the result set of the stored procedure ?
Any idea for a solution ?
Any idea to debug such strange behaviour ?
Thanks a lot for any help.

Good to know CR doesn't like joins of Stored Procedures to something else.
But in my testcase, I finally dropped the link between the ttx file and the stored procedure. Doing so, I was able to run the report from the designer with the stored procedure as datasource instead of the ttx file. At that moment, I still had missing data in my report, while the resultset of the stored procedure returns me all the correct data !
In the mean time, I changed the layout a bit, especially the text fields containing name, address, country and postal code and city of the customer, by just adding some spaces between those seperate databasefields. In fact, there is one text box with all those database fields concatenated one to the other.
And by just adding some spaces in between, my report works fine again ?!
Strange, strange, strange,....

Report does not display correctly when exported to adobe

Post Author: mgisonda
CA Forum: Crystal Reports
Hopefully someone can help me. I am currently running Crystal Reports profession version 10. I have applied service pack 1 and recently service pack 6. I am having a problem with the display of a report within adobe. My report is a bit complex. It is a 8.5x11 one page landscape report. It is set up in a grid format with multiple lines and boxes drawn on it. Here is the report information: Report Definition----
Number of Database Fields: 144 Number of On-Demand Formulas: 40 UFLs in use: None Page N of M Used: No File Format Schema: 10.2.0 I created the report using CR developer. I use the report within a web project. The user requests the report and it returns to the user, an adobe file of the report. However, this is where I am having trouble. On my local development machine, the report displays fine. In CR developer, the report displays fine. When I export the report to Adobe from the CR Developer, it exports fine. BUT when I run the report from my web site, the adobe file that is returned is broken up over 42 pages. What seems to be actually happening is the return adobe file seems to think that the page size is 2in X 4in.. Where it got that, I don't know.The server running IIS is a windows server 2003. It has adobe 8.0 reader on it. I also have Crystal 10 Server Distribution loaded on it. And I have loaded CR10 Service pack 6 on that as well. Below is the web code that is used to display the report:Imports CrystalDecisions.Shared'Imports CrystalDecisions.CrystalReportsImports CrystalDecisions.CrystalReports.EngineImports CrystalDecisions.CrystalReports.Engine.ReportClassPublic Class PrintInspectionLayout Inherits System.Web.UI.Page Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Dim mNotInSpringDesign As String Dim mPartType As String mNotInSpringDesign = Request.QueryString("NotInSpringDesign") If mNotInSpringDesign = "TRUE" Then mStockCode = Request.QueryString("StockCode") lblNotInSpringDesign.Text = "Stock Code #: " & mStockCode & " does not exist in Spring Design." lblNotInSpringDesign.Visible = True Response.Write(" <center><a href='SpringDesignWildCardSearch.aspx'>Go To Search Page</a></center>") Else mStockCode = Request.QueryString("StockCode") Dim pList As ParameterValues = New ParameterValues Dim paramName, paramValue As String Dim pV As ParameterDiscreteValue = New ParameterDiscreteValue Dim Report As ReportDocument= New ReportDocument Dim expOpts As ExportOptions = New ExportOptions Dim pdfRtfWordFormatOpts As PdfRtfWordFormatOptions = expOpts.CreatePdfRtfWordFormatOptions Dim expFormatOpts As ExportFormatOptions = expOpts.ExportFormatOptions expOpts.ExportFormatType = ExportFormatType.PortableDocFormat mPartType = Request.QueryString("PartType") 'SELECT THE INSPECTION LAYOUT TYPE TO PRINT Select Case mPartType Case Is = "C" Report.Load(MapPath("./Reports/CompressionLayout.rpt")) 'Report.Load(MapPath("./Reports/PCAR.rpt")) Case Is = "E" Report.Load(MapPath("./Reports/ExtensionLayout.rpt")) Case Is = "T" Report.Load(MapPath("./Reports/TorsionLayout.rpt")) Case Is = "W" Report.Load(MapPath("./Reports/WasherLayout.rpt")) Case Is = "F" Report.Load(MapPath("./Reports/FreeFormLayout.rpt")) Case Else End Select pV.Value = mStockCode pList.Add(pV) Report.DataDefinition.ParameterFields("StockCode").ApplyCurrentValues(pList) Response.ClearContent() Response.ClearHeaders() Response.ContentType = "Application/pdf" Report.ExportToHttpResponse(expOpts, Response, False, "") Report.Close() End If End Sub Any ideas as to the solution? Why is it not displaying correctly? I have spent two days researching every FAQ to try to find an answer, but to no avail. Please any help would be greatly appreciated. ThanksMike

Hi Paul
You're more likely to get an answer to this if you post in the UNIX forum.
By the looks of it, you may have a problem with your fonts.

Windows 8.1 is not detecting blank/recorded cds

I tried serveral ways to fix this problem but the CD/DVD rom still did not recocognize my recorded cds. movie DVD and antivirus software installation DVD work perfectly. I read some topics online and they said that windows 8 and 8.1 won't allow laptop reading/playing unlicensed CDs and DVDs, am I correct? If it is so, how can I play my recorded cd on laptop? Thanks!

Thanks for helping me!
Here is my laptop information:
HP ENVY m6-1125dx Notebook PC
Here are the results after checking three discs:
Update: Jan 17 2014
1. DVD movie
sequential read test: PASSED
random read test: PASSED
read and write compare test: The media in the drive is not te type required for tje selected test
2. Kaspersky installation for PC
sequential read test: PASSED
random read test: PASSED
read and write compare test: The media in the drive is not te type required for tje selected test
3. blank CD
sequential read test: The selected test requires non blank media for testing
random read test: The selected test requires non blank media for testing
read and write compare test: PASSED
I already refreshed the PC but it's still so
I don't have a OS installation CD/DVD. the PC comes with the recovery partition (reinstallation and refresh PC)

Stock in warehouse report - value not displayed.

In the "Stock in warehouse report" I selected this option: Price source = Last purchase price.
In the report, for an item, the value in the field "Item Price" is not displayed.
This item has a good receipt (with value) in this year.
Why the value is not displayed?
Thanks
Paolo

Paolo...
1. Did that receipt get paid for with an AP Invoice (when last purchase price is updated)?
and
2. Did you run an Inventory Audit Report before running the Inventory in Warehouse Report?
To see this maybe you can go into SAP OEC DEMO and create a new item, then create a PO - run the two reports, copy to Goods Receipt PO - run the two reports, and then copy to AP Invoice - run the two reports. You will see the difference.
Accounting point - an item is not really valued until the AP Invoice is processed. Only then do you know what the actual purchase cost is for a product.
Regards - Zal

Some reports are not displayed -- JInitiator 1.3.17 to JRE 1.6.43

We have our Medical Suite developed using Oracle Forms 10gR1(9.0.4) version.As we came to know that JInitiator is no more supported from Oracle and it has many problems Windows 7 64 bit esp.., with IE (9.0) recently we have migrated the Client PC's from JInitiator 1.3.17 to JRE 1.6.43.
Unfortunately when we print the reports, some of the reports are being displayed and the other reports are not being displayed ( No action upon on clicking print button).
But when we revert back to JInitiator all the reports are working fine without any change in IE configuration. So can someone give me the probable cause for this behaviour.
Edited by: Chaitu on Mar 17, 2013 8:57 AM

Chaitu wrote:
If the parameter are written in multiple lines using concatenation then there is no problem, but some places we made the DESTYPE OR CACHE OR DESFORMAT in different lines and it is working fine when we used Jinitiator 1.3.17.
Once we changed to JRE, it stopped working maybe because the command cannot be issued to browser since it is incomplete.
Is 10.1.2.3 a stand alone patchset given by Oracle for migrating 10g R1 to 10g R2 or there are some other patches given before this patchset(10.1.2.3).
I am asking this because most of the times, Oracle releases a patch in sequential order and they should be installed in the same order.
For example In order to install Enterprise Manager 10g Grid Control Release 5 (10.2.0.5), we must have 10.2.0.1.0 (10.2.0.2.0 for Windows) release up and running. So I was not sure whether this patch can be installed alone without any other combinations directly. Please enlighten me if you can.
Hi Chaitu,
patchset(10.1.2.3) is applicable for the following releases only:
Oracle Application Server 10g Release 2 (10.1.2.0.0)
Oracle Application Server 10g Release 2 Standard Edition One (10.1.2.0.1)
Oracle Application Server 10g Release 2 (10.1.2.0.2)
Oracle Application Server Forms and Reports Services (10.1.2.0.2)
Oracle Application Server Portal 10g Release 2 (10.1.4)
Oracle Application Server Portal 10g Release 2 Patch Set 2 (10.1.4.1)
Oracle Developer Suite 10g (10.1.2.0.2)
Oracle Business Intelligence 10g Release 2 (10.1.2)
Oracle Business Intelligence 10g Release 2 (10.1.2.0.2)
Oracle Business Intelligence Tools 10g Release 2 (10.1.2)
Oracle Business Intelligence Tools 10g Release 2 (10.1.2.0.2)
Oracle Business Intelligence Tools 10g (10.1.2.0.2) that shipped as part of Oracle Developer Suite 10g Release 2 (10.1.2)
OracleAS 10g Release 2 Patch Set 1 (10.1.2.1.0)
OracleAS 10g Release 2 Patch Set 2 (10.1.2.2.0)
Hope this helps
Hamid
* batter discuss at {forum:id=82} forum.

Output of the report is not displaying based on the layout

Hi,
We are not able to get the report based on the layout. We have found that F4 help is not working for the layout selection, as there are so many layoust mantained for the report.The FM REUSE_ALV_VARIANT_F4 is used to select the variant.But we have checked the table LTDX, there are no lay out is there for this report.hence the out out of the report is always displaying based on one standrd layout.
Kindly guide me to resolve this issue.
Regards,
Arundhati

Hi, follow these steps:
1 - Variant on Screen
SELECTION-SCREEN BEGIN OF BLOCK bloco2 WITH FRAME.
PARAMETERS:       p_layout LIKE disvariant-variant.
SELECTION-SCREEN END OF BLOCK bloco2.
2 - F4 on field
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_layout.
PERFORM busca_variantes.
AT SELECTION-SCREEN ON p_layout.
IF NOT p_layout IS INITIAL.
    PERFORM verifica_variante.
ENDIF.
3 - Functions for F4
3.1 Form busca_variantes
FORM busca_variantes.
DATA: variant_exit(01) TYPE c,
        variante         LIKE disvariant.
variante-report = sy-repid.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
       EXPORTING
            is_variant    = variante
            i_save        = 'A'
       IMPORTING
            e_exit        = variant_exit
            es_variant    = v_variante
       EXCEPTIONS
            not_found     = 1
            program_error = 2
            OTHERS        = 3.
IF sy-subrc = 0.
    IF variant_exit = space.
      p_layout = v_variante-variant.
    ENDIF.
ENDIF.
ENDFORM.                    " busca_variantes
3.2 - FORM verifica_variante
FORM verifica_variante.
v_variante-report = sy-repid.
v_variante-variant = p_layout.
CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
       EXPORTING
            i_save        = 'A'
       CHANGING
            cs_variant    = v_variante
       EXCEPTIONS
            wrong_input   = 1
            not_found     = 2
            program_error = 3
            OTHERS        = 4.
IF sy-subrc 0.
    MESSAGE w368(00) WITH p_layout ' não é uma variante válida'.
    CLEAR p_layout.
ENDIF.
ENDFORM.                    " verifica_variante
4 - Calling the variant on reuse function
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
is_variant               = v_variante
5 - Global DATA
DATA:      v_variante   LIKE disvariant.

XL Reporter Do Not Display Blank Records

Similar Messages

Maybe you are looking for