Blank Screen Simulation and Runtime Error 'DATA_BAD_REFERENCE'

Hi Gurus,
I manage to create eCATT for ID creation using TCode SU01 earlier and it works fine - so HAPPY :). Then, I try to develop another eCATT for indirect roles assignment using Tcode PP01 > Position > Relationship B007: AG Role.
However, I'm stuck at the Screen Simulation step to insert the 'Import Parameter' whereby the recorded screen seems to be blank (boxes without text) and when I try to proceed using the 'Next Screen' button, I got the Runtime Error message 'DATA_BAD_REFERENCE'.
Am I missing something here? Or do I need to consult ABAPer to debug the error? Appreciate your guidence on this matter as I'm very very new to eCATT development.
Regards and millions thanks !

Hi,
I have seen the similar issue posted by other users in this forum earlier. But no luck on the solution. I would recommend to insert the import parameter into the interface manually instead of using the simulation screen.
Fields having mode u2018Su2019 (Set) under each dynpro of the command interface contain some value that you entered during the recording. This is the value one needs to parameterize as Import Parameter. so that with next run a new set of data will be passed to the recording. Change the value of the VALIN for these fields and replace with your import variable name.
Hope this will solve your problem.
thanks
Venkat

Similar Messages

After iOS7 upgrade, iTunes only gives blank screens. And Netflix won't load. Any idea on what to do?

After iOS7 upgrade, iTunes only gives blank screens. And Netflix won't load. Any idea on what to do?

Yep. I did some more poking around and found that one. Downloaded it and tried to run it and got more errors. Did some more searching and found a fix for the installer on Vista. Ran the fix and tried the ipod software again. It got further, but then hung up again. I'm still trying to figure this all out. Anyone got any answers it'd be much appreciated.

I went to download the latest i Tunes update but somehow it went wrong and I ended up removing i Tunes from my system and re installing it but I can't get it to reinstall. I keep getting error massages Error 7(windows error 1114) and runtime error R6034,

I attempted to download the latest i Tunes update but somehow it all went wrong and I have ended up trying to reinstall iTunes but it does not work. I keep getting error messages-Error 7 (windows error 1114) and Runtime error-" R6034 an application has attempted to to load the runtime library incorrectly". Help what do I do now?

Hello there, tulchan.
The following Knowledge Base article addresses the very issue you're describing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Soft thinks and Runtime Error Printing issue!

Whenever printing a document these 3 issues (either 1 or both or all 3 will occur)
When printing with wireless printer C4580 (Windows Vista 32 Bit)
1.It will not recognize the wireless printer and say that it is disconnected.
2. When printing a document sometimes it will not print and a info bubble will pop up on the bottom of the right side of the screen saying "Soft thinks program error" and it says i have to contact the manufacture.
3.EVERYTIME when printing, it will print the document, then this information screen will come up stating:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:C\Windows\SMINST\BLService.exe
This application has requested Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
If anyone has any info to that can help please let me know...especially for #3!
Thanks

Follow the instructions of tt2 in https://discussions.apple.com/thread/5822086 and note to run as admin

Verify operation failed and Runtime Error While using Adobe Reader 10.1.2

We have installed Adobe reader 10.1.2 on Windows Servers 2008 and user are accessing its using Citrix.When users open PDF files they are getting message "Verify Operation Failed" and also getting error "Runtime Error"
even on one server we updated the version to 10.1.3 but still they are getting same error.
Pdf files open up but after multiple attempt..
Error are provided below

Hi, I have been using Citrix on Server 2008 for quite soemtime. And have not seen any such issues with Reader 10.1.2 and 10.1.3
Can you provide the event viewer log ? Also is the same issue seen while opening PDF in the Citrix Server ? Or it is mainly seen while Citrix Users accessing the published Reader app via Citrix Web URL ?

Just tried to install update to iTunes and keep getting error statements. The errors statements read: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114) and Runtime error - Program: C\Program files (x86)\iTunes\iTun

I just tried to install the iTunes update 11.4.1 and keep getting error messages. I have never had this issue before over many years of using iTunes and getting updates to the software. I have removed the iTunes from my computer and reinstalled it but keep getting the errors. Here are the error statements: "Runtime error: Program: C:\Program Files(x86)\iTunes\iTunes.exe; R6034; An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team. iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114)

Follow the instructions of tt2 in https://discussions.apple.com/thread/5822086 and note to run as admin

SAP Query and runtime error CREATE_OBJECT_CLASS_NOT_FOUND

Dear ABAP gurous,
I have created a query connected to an infoset. It worked fine. When I made a minor change to the infoset (checked, saved and generated afterwards) I couldn't run the query. Now, the problem is, when I run the query, the ABAP runtime error occurs:
Runtime Errors CREATE_OBJECT_CLASS_NOT_FOUND
Except. CX_SY_CREATE_OBJECT_ERROR
Can somebody tell me what causes the problem? Did I miss to do something after introducing this minor change to the infoset?
Thank you in advance and regards
Rafal Kosinski

In the infoset I had tables join (FEBKO+T001) and additional field group. For the field group I defined a field for which a code was created (a function module call). It worked for this setup.
Then, I just made a change in the code: in the function module call, I changed
sy-datum to febko-azdat for parameter DATE of the function module.

OpenPS4MSP Version 2.02 and Runtime error 429

Hi,
I don't have experience of intergration Project System(PS) & MS Project. I have done following steps and got error message Runtime error 429
1. Install fully SAPGUI on client pc ok. sapgui and server IDES work well
2. Install OpenPS4MSP Version 2.02 on client PC ok.
3. Open Connection from OpenPS4MSP to server ok
4. Menul -> OpenPS --> Download Project: Display a dialog, Choose Project Definition, Click on ... button, And then the error message "Runtime error 429" occurs
Please Help!!!
Thank you very much
Long
Message was edited by:
Long Nguyen

I have the same error to.... sometimes thats not happend and show me a mensage to insert the note 166870... and that note are for version 4.5 and I´m working at ECC 6.0.
Someone can help ?

Need help with Photoshop and Runtime Error

Runtime Error Photoshop & MS Visual C++ WIN7 32bit Photoshop will appear to launch then dies with a ('MS Visual C++ Runtime Error!' = Application requested the runtime to terminate it an unusual manner. Contact application's support team for more information).
Anyone have clue as to how this can be fixed and not lose all currently loaded brushes, styles, actions, etc?

You need to provide much more info, like exact system specs and crash details:
Working with your Operating System’s Tools
Also hold down Ctrl+Alt+Shift during program startup to reset the prefs to defaults. If the error is caused by damaged presets, actions or whatever, then you will lose some of that, otehrwise they will be untouched.
Mylenium

Rode podcaster and runtime error.

hello, i hope someone can help me with this problem. i purchased adobe auditon 3.0 because i do podcasting and i needed a program that would support 2 usb microphones. well i have no problem getting one of my microphones to record (an MXL usb .006) but when i plug in my rode podcaster and try to use it (and this is with the MXL unplugged, so i havent even tried to use multiple usb mics yet) it gives me a error that reads "microsoft visual C++ runtime library" as the header, then it reads "runtime error! program:...rogram files (x86)\adobe\adobe audition3.0\audition.exe
this application has requested the runtime to terminate it in an unusual way. please contact the application 's support team for more information."
the laptop is running windows vista, the 64 bit version.
so can anyone give me an idea what to do next?

>and i have no clue what you mean when you say use the wdm usb driver rather then the asio ones, so any advice there would be appreciated.
Well, this is the simplest explanation I can manage that explains the important principles:
WDM drivers are the ones that Microsoft intend to work with the OS (Windows Driver Model), and they allow for the use of multiple spund devices - wherever and however they are attached. But, these drivers have inevitably got a higher latency (delay introduced in processing signals), because they sit nearer to the top of the processing heirarchy in the OS. ASIO gets around the latency problem by short-cutting most of the OS, and allows software using its engine to talk more or less directly to your sound device - singular. To use any more than a singular device would require the arbitration that the OS would have to provide, thus destroying the point of doing this in the first place.
What ASIO4ALL does is to take the ASIO-based stream from Audition, or any other software using the same engine, and convert that back to a WDM-based internal protocol. It is bi-directional, so signals coming in (like from your USB mics) can be converted from their WDM format into ASIO for Audition, as well. As a consequence, ASIO4ALL can redirect a multi-channel stream to different devices, and can also take multiple input streams from them as well, combining them into a concurrent ASIO stream. There are several penalties to be paid though - the increased latency is one, and also you could
potentially run into sync problems, but not with the application you have in mind, I think.
There is one important bit in the ASIO4ALL FAQ that you should note, but a comment on it is needed:
>After some initial troubles with earlier revisions, the driver now appears to work just fine with numerous USB devices. one thing to not do, I mean: not ever! is to check the DMA box with USB devices. If you do not need all the additional software gizmos like EAX, EQ, Fake3D-Whatever... it is recommended that you _not_ install the drivers shipped with your USB audio interface. Windows has a built-in generic USB audio driver that works with most devices. Thus, if you want to have honest, no-nonsense, low-latency audio playback/recording with your USB audio interface - by all means: stick with the Windows driver! This is especially true for consumer grade stuff, where you can be assured that the drivers shipped with it are most likely 'consumer grade' as well.
One of the problems with USB mics is that you may well need to install at least the control applet for it, otherwise it
may not be usable sensibly at all. But, USB mics vary - so what you would need to do in any given situation, I can't comment on. In the past though, it's been pretty apparent that without the control applet, at least some of them have no sensible gain control or routing. But I would emphasise that this is very much a YMMV situation.
>i freely admit i need to do more research and reading on the software, but i have been told by people using multiple usb mics that this is what they used, or at least earlier versions of adobe audition.
That would be true. The earlier version referred to would probably be 1.5, which was the last version to use the built-in WDM system for recording, although all earlier versions could do this too, at least in principle. I believe, though, that there were other difficulties recording from USB sources with earlier versions, so all bets are off unless you've actually tried what you want to do with a specific hardware/software combination and actually
know it works.

Blue screen shows and this error code shows up 0x1900101 - 0x4000D

The installation starts correctly to a state where the blue screen shows and restores windows to its previous state and gives this error code 0x1900101 - 0x4000D

Hi,
For error information:
0xC 1900101- 0x4000D - MOSETUP_E_SETUP_PLATFORM
This can happen during the data migration phase in the second boot.
You can send your rollback logs to me, I would look into it to see if we can find something.
C:\$Windows.~BT\Sources\Rollback\setupact.log
You can send it to this email address:
[email protected]
Alex Zhao
TechNet Community Support

[Dell E5510] Blank screen during and after boot

Hello,
I performed system update some time ago (2 or 3 weeks) and left my computer unused. Today I tried to power on it and I was very surprised, because I didn't see anything on screen during boot and after it. I rebooted computer in fallback mode (I also added "i915.modeset=0" to kernel init args), and I saw command line. Then I updated whole system and rebooted it again - no luck again blank screen during boot and after.
I rebooted it one more time, but with default kernel (I disabled KMS again via GRUB command line) and I saw systemd output during boot. I teems, that all services were started successfully, because all messages were prefixed with "OK". Then I cloud only use command line, because Gnome 3 was not running under seventh console.
Any idea what is going one here?

Hi there Sudarshan21,
I would recommend taking a look at the troubleshooting steps found in the article below.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
-Griff W.

Folder and or a blank screen subfolder and images are visible in the Folders Panel but when clicked on to Import, "No photos found"

Mac OS 10.10.2, LR 5.7
Folder has blank screen; subfolder shows "no Photos Found"

paulge wrote:
RE: those multiple posts, I was trying to edit my previous posts. Once a comment is posted, is it possible to edit it?
Yes, to edit your post, click the "actions" link on the bottom-left of you message rectangle.

Blank second page and export error in Crystal 10 Web Report Viewer

We have a customer that is having 2 issues viewing an .rpt file in the Crystal 10 Web Report Viewer. When they view a report that is 12 pages, the first page appears OK. When they click Next to go to the Next page, the page shows as blank. The second issue is that If they try to export the .rpt they get this error:
Exception Details: System.Runtime.InteropServices.COMException: Access denied Error in File UNKNOWN.RPT:
Access to report file denied. Another program may be using it.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack trace:
[COMException (0x80000220): Access denied.
Error in File UNKNOWN.RPT:
Access to report file denied. Another program may be using it.]
      CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export (ExportOptions pExportOptions, RequestContext pRequestContext) +0
CrystalDecisions.ReportSource.ErrorReportSourceBase.ExportToStream(ExportRequestContext reqContext) +133
[LoadSaveReportException: Access denied.
Error in File UNKNOWN.RPT:
Access to report file denied. Another program may be using it.]
CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e) +661
CrystalDecisions.ReportSource.ErrorReportSourceBase.ExportToStream(ExportRequestContext reqContext) +186
CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExplortRequestContext reqContext) +20
I can view and export the same .rpt file in my environment without any issues. Has anyone seen these errors before and have any ideas on how to resolve them? They seem to be environment related since I can view the same report OK on my machine.
This is using Crystal 10 on Windows Server 2003.

Hello,
This sounds like a postback issue. Does your application handle postback by putting the report in session?
There is a [sample|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/CrystalReports_dotNET_SDK/crsdk_samples_aspx/data/crsdk_net_tutorials_115_en.zip] to look at on our website. It was created with Crystal Reports XI R2 and Visual Studio .NET but the code will be the same.
The basic code is:
Private crReportDocument As ReportDocument
    Private Sub ConfigureCrystalReports()
        'Check to see if the report exists
        If (Session("crReportDocument") Is Nothing) Then
            crReportDocument = New ReportDocument()
            crReportDocument.Load("C:\1 - Report\CRParams.rpt")
            'Do anything required for the report
            'Logon to the database
            'Pass parameters
            'Assign the report into Session
            Session("crReportDocument") = crReportDocument
            'Assign the report to the Viewer
            myCrystalReportViewer.ReportSource = crReportDocument
        Else
            'Assign the report that is stored in Session to the report instance.
            crReportDocument = CType(Session("crReportDocument"), ReportDocument)
            'Assign the report to the Viewer for each postback
            myCrystalReportViewer.ReportSource = crReportDocument
        End If
    End Sub
Elaine

Java Update won't work and runtime error

I have 2 problems.
1. First, I am running Windows Vista and Internet Explorer 7. I also use Firefox 2.0.0.11.
I have Java SE Runtime Environment 6, but when I try to download Update 3, this is the message I receive on both IE and Firefox:
*"This installation package could not be opened. Verify that the package exists and that you can access it,*
*Or contact the application vendor to verify that this is a valid Windows Installer package."*
2. Second, this is my problem when I try to play Text Twist on Yahoo Games: On IE, I get a message stating that the Runtime has requested that the program terminate it in an unusual way. Then IE closes.
On Firefox, the game simply never loads.
When I first got my computer with Windows Vista, I was able to play this game. I don't know what's changed to cause this error to happen.
If any one can help me, I will appreciate it very much.
Thank you,
Joy

I guess I posted to the wrong forum. {embarrassed}
I found the solution for my problems in the forum for java errors. It worked. Thank you.
>
I had this problem with JRE 1_5_0_09 - after beating it to death, I finally got it.
Note that JRE did NOT appear in my add/remove programs list - also it did not appear when I ran the windows install clean-up utility msicuu2.exe.
However, when I browsed to
Documents and Settings\User\Local Settings\Application Data\Sun\Java
I found a folder named jre1.5.0_09 containing the MSI file which installed JRE perfectly.
I am not sure if everyone with this problem will have the JRE file there, but I imagine that if it's NOT there, placing it there from another system and then running it might also work.
good luck.

Blank Screen Simulation and Runtime Error 'DATA_BAD_REFERENCE'

Similar Messages

Maybe you are looking for