*** [BLANK Subject]

Dear support,
I just made a fresh and clean install of Windows 7 32bit RTM German.
I have a <span class="mainlink">Sound Blaster X-Fi XtremeMusic and right after installing the latest driver from creative.com, it is not possible to start the Control Panel any more.
It crashed immediately and errors get written to the EventLog, e.g.
Name der fehlerhaften Anwendung: Explorer.EXE, Version: 6..7600.6385, Zeitstempel: 0x4a5bc60d
Name des fehlerhaften Moduls: CTMLFX32.dll, Version: .0.4.0, Zeitstempel: 0x483f9682
Ausnahmecode: 0xc0000005
Fehleroffset: 0x000094c5
ID des fehlerhaften Prozesses: 0x57c
Startzeit der fehlerhaften Anwendung: 0x0ca280e65e6b8
Pfad der fehlerhaften Anwendung: C:\Windows\Explorer.EXE
Pfad des fehlerhaften Moduls: C:\Windows\system32\CTMLFX32.dll
Berichtskennung: d5c3362d-940-de-969e-003d4ab6622
Unfortunately I read a lot of posts about the same problem in this forum with Windows Vista.
Although it is very, very poor from Creative to STILL provide such buggy drivers after years, I am willing to support you and provide you with further information like core dumps etc., if this helps you to fix this annoying bug.
Regards,
Ralph
System Information
Time of this report: 8/28/2009, 2:23:
Machine name: ANGEL
Operating System: Windows 7 Ultimate 32-bit (6., Build 7600) (7600.win7_rtm.09073-255)
Language: German (Regional Setting: German)
System Manufacturer: System manufacturer
System Model: System Product Name
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ (2 CPUs), ~2.4GHz
Memory: 2048MB RAM
Available OS Memory: 2048MB RAM
Page File: 88MB used, 3276MB available
Windows Dir: C:\Windows
DirectX Version: DirectX
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (00 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.0.7600.6385 32bit Unicode

[size="3" face="Times New Roman">Hi, I have the same problem on both my Vista and Wndows 7 machine. The dri've 2.8.00.3 will cause Windows Explorer/Control panel to crash. I had to reinstall my old dri've 6.0..272 released in 3/5/07. This is very poor customer support when a company as large as Creative Labs releases technology that does not work properly. When I upgraded one of my desjtops to Windows 7, I though maybe I?not have the issue, but I am. I would understand if the?problem was only with Windows 7, however there is?excuss?to have?an issue with the Vista machine.

Similar Messages

Creating a blank subject-line in email hyperlinks

I'm producing a pdf that includes email hyperlinks, and want to leave the subject line blank so responders can choose the most appropriate line themselves. Keynote, however, seems to insist on a subject line being provided, otherwise it defaults to showing 'email subject'.
Anyone know if it's possible to produce a blank subject line for the email links?
iBook G4 Mac OS X (10.4.6) 1.2 GHz, 768 MB

Sorry, I figured it out. I was "re-creating" the text box by copying the original text in order to keep the font. When I tried the procedure starting from scratch, voila - new, accurate Email Me button.

UTL_SMTP Problem: Sporadic Blank Subjects in Email

I am wondering if anyone else has run into this problem with their implementation of UTL_SMTP.
We currently deployed code changes to switch from hosting out to send email, to using the UTL_SMTP email functionality from within the database.
We are now getting reports of these emails sporadically having a blank subject.
The "Subject:" tag and corresponding subject text are within the message body of the email instead of the subject line of the email.
Looking for a quick fix to ebb user grumblings.
Thanks in advance for any help you can provide -
Mindi

Thanks for the example. That's exactly how we are using the utility, and we are successfully sending email.
But for some bizarre reason the first person on the distribution list gets an email with the subject correctly populated, and the second (third, fourth ...) person gets an email with a blank subject, and the words "Subject: [blah, blah, blah]" embedded within the body of the message.
And this doesn't happen every time. We cannot identify a pattern, and are having an impossible time trying to duplicate the same error.
It's almost as if the Oracle utility is unable to resolve the Subject field on occasion for some recipients.
I was hoping that someone else had run into this.

Can message filters cause messages with blank subject and 1969 dates

I have done many things to try to trace why I get messages with blank subjects and 1969 dates.
downloaded TB
created all new folders
moved only persdict and msfFilterRules to the new profile.
At this try
set the option NOT to download messages on startup
went off line and compacted all folders.
emptied the inbox and all subfolders.
Exited TB.
deleted all files under pop.verizon.net except msgFilters rules.
Deleted all msf files for local folders in my profile.
opened TB.
a few times
--With Firefox went to verizon webmail and moved a few messages to the Verizon inbox.
--moved to TB window
-- Clicked <get messages>
-- still received blank messages with 1969 dates
-- deleted those messages
-- emptied trash
went to the filter rules and unclicked all filters that send files to local folders
left 2 rules in place
(1) if a sender was in my address list send the message to inbox folder called "Known sender"
(2) if the subject was NOT a weird string like "&*%$@!+=?><" send the message to inbox folder called "Suspicious" This filter is because there is not an ELSE function in TB it is extremely unlikely that a message would have such a subject.
[These two filters should move all messages except junk to the two folders.]
I then tried the above procedure of going to Verizon, moving messages to Verizon Inbox, etc. a few times.
I did NOT get the messages with blank subject and 1969 date!!
Questions:
(1) Is this just a fluke?
(2) From understanding the internals of TB is it reasonable that some now-unchecked message filter(s) had caused there to be the oddball messages?
(3) if It is a filter rule, how can I find out which one it is?

I looked though all the condition specification options I do not see how using header info in a condition specification would '''change '''the header info.
I looked at the possible actions on filters.
I only see "tag" and "Star" as ones that might change header info.
However, I found out that when I unchecked the first 17 of 19 filters and just had the two I explained above I would sometimes get a message with the 1969 date.
Since then I deleted those two rules and made new versions and moved them to the bottom where the earlier versions had been. I have not had the 1969 messages since!!
I have put a new filter at the top of the list that checks whether the date is before 1/1/971. If teh date is before 1/1/1971 the filter tags the message as important and moves it into the inbox folder named "Suspicious".
I have not seen any 1969 messages since then.
Since the problem was intermittent and because I was not able to create conditions whereby The 1969 dates would or would not occur, the problem may not be 'fixed'. I'll watch it for a while
Meanwhile, I'll continue to manually go though the webmail on Verizon and as a test only download mail that I do not want to save for the long term. Messages I want to keep I'll move messages I want to keep for the long term into foldrs on Verizon. '''If '''after a while, I do not get any more of the 1969 messages, I'll move messages I want to keep into the Verizon inbox and download them into TB

Filtering on blank subject

I have been unable to find a direct way to set up a mail filter on a blank subject.
If my criterion is Subject is with nothing specified in the subject field, it is rejected. If I add some other condition (Every Message + All of the conditions are met) and create one like the above, it seems to be accepted...
However, it nonetheless doesn't act on a message whose subject is blank.
Is there a way I haven't figured out?
BTW, I did try scripting, but I put that question in a second post.

Thanks Andy, this is good stuff...i'm not an applescript user so I'm not sure if I've got the syntax wrong, but here's what i've done...
using terms from application "Mail"
on perform mail action with messages theMessages
tell application "Mail"
repeat with thisMessage in theMessages
if ((sender of thisMessage is "[email protected]") and (subject of thisMessage is "")) then
try
delete thisMessage
stop evaluating rules
end try
end if
end repeat
end tell
end perform mail action with messages
end using terms from
I've applied this rule to all messages, but unfortunately it's not working. Not sure what to think...it's pretty straight forward so i don't understand why it wouldn't work...I've also tried a rule where it script just looks for the blank subject and the rule itself only applies it to messages from the specific email address but that didn't work either...

IMAP Email Portlet Error accessing email with blank subject field

I have sucessfully deployed imap portlet and added it to a page. I am able to read and compose emails. However while testing the portlet I ran into few problems:
1. Cannot read an email from inbox if the subject field of email is blank. Only way to read this email is to first select an email that has a subject and then navigate through "next" or "previous" button to read this email.
2. Some of the emails does not show the attachments. Some of them dooes show it. I am unable to figure why is it doing so.
3. It takes too long to load and sometimes ends up in "portlet time out".
Has anyone else also ran into such problems. Is there a solution to these problems.
Thanks
Abhishek Periwal

Thanks for early reply.
I analayzed my emails and figured out that email that are forwarded to me with some attachments have problems. These emails do not include the actual attachments , they only include the text part written by the sender. It will be great if this bug gets fixed.
Secondly I increased the time out and it helped. Thanks for your suggestion.
Thanks
Abhishek

Warn on empty/blank subject line/header? (I've got a lead)

I see that others have already asked here a few times about whether there is a plugin or setting for Mail.app to warn me when I attempt to send a message w/ no subject header. The answer seems to be there's no way to do that and we're just out of luck. You'd think there'd be a demand for this, as it seems to be a mistake that anyone can make every now and then.
Well, I'm asking again, and also I've got a lead on a potential route to a solution.
I did find a handy Mail plugin that warns when you're forgetting an attachment:
http://www.macosxhints.com/article.php?story=20060330105237123&query=mail%2Batta chment
The author of that plugin even has a tutorial on making Mail.app plugins:
http://www.bazza.com/~eaganj/weblog/2006/03/29/demystifying-mail-app-plugins
For someone with the right know-how, it seems like this could totally be adapted to warn on an empty subject line! Come on, somebody out there's gotta be up to the task! It's your channe to win the adoration of millions and prevent ambiguous emails worldwide!
G5 dual 2.3ghz Mac OS X (10.4.2)

I take the simple (though not free) way:
www.bebosoft.com/formstogo/
domerdel wrote:
> i've developed a working PHP5 file to submit the form to
the
> webmaster (info@). Now, the client wants me to add on a
custom
> autoResponder. basically, the user fills out the form,
the user gets
> an e-mail saying thank you in the subject line and body
copy, says it
> came from info@ website.
>
> Here's the PHP script that's linked to it:
>
>
>
> <?
> error_reporting(1);
> if ( $_POST['tpl'] == "mail_req.tpl" )
> $mailto = Array("[email protected]");
> else
> $mailto = Array("[email protected]","[email protected]");
>
> $subject="Celibre Web Inquiry: {$_POST['name']}";
>
> if ( $_POST['tpl'] == "mail_req.tpl" ) {
> $t_data=file_get_contents("mail_req.tpl");
> $subject="Req Cert Inquiry from Website";
> }
> elseif ( $_POST['tpl'] )
> $t_data=file_get_contents("mail_contact.tpl");
> else
> $t_data = file_get_contents("mail_template.tpl");
> foreach($_POST as $key=>$value)
> $t_data=str_replace("[".$key."]",$value,$t_data);
>
> if ( $_POST['companyname'] )
> $fromname=$_POST['companyname'];
> elseif ( $_POST['name'] )
> $fromname = $_POST['name'];
> else
> $fromname = $_POST['firstName'] . " " .
$_POST['lastName'];
>
> $headers = "MIME-Version: 1.0\n".
> "Content-type: text/html; charset=iso-8859-1\n".
> "From: \"Website.com\" <[email protected]>\n".
> "Date: ".date("r")."\n";
>
> foreach($mailto as $value) {
>
mail($value,$subject,$t_data,str_replace("[to]",$value,$headers));
> }
>
> header("location: thank_you.html");

I get email with blank "from", blank "subject" and nothing in it! What is i

Anybody knows why I have started getting emails that have no from, no subject and no body? I'm not sure when it started exactly, I have been getting about one a week and today I got 2 together. Strange behaviour...

I have been getting these too! They really bother me. And sometimes I get email that has a weird bunch of nonsense letters and numbers as the sender.
I usually delete these immediately without opening them, but wonder what is going on!

Workflow Email Notification with blank subject header

Hi Gurus,
I am not a workflow expert but I am looking into a situation where some PO upon sending for PO release approval, there is subject header but for certain country, there isn't any header.
Please advice where to check.
Thanks in advance for your help.

Hello,
First check (in SWEL) which events are created when a sales order is created.
From this you can deduce the BOR object.
See if the business partner's contact person email is an attribute of the object; if not then you will have to add an attribute that deduces the email via an ABAP program or function module.
This attribute should be added to a delegated subtype of the BOR object.
Then you can use the new attribute of the BOR object in the workflow to send him a message.
Try it.
regards
Rick Bakker
Hanabi Technology

"subject" is blank

Tried to set up rule for e-mails that have no subject (they're usually junk) but I wasn't able to do that. Is it possible? I wanted to move all e-mails with no subject line to Trash or Junk. When I went to "add rule", I set the "if condition are met" boxes to "subject" "contains" and then I left the last box blank...but that didn't work because a window popped up telling me to fill in all the blanks. But that's the point: I want to block e-mails that have a blank subject line!
Is there any way to set this up?
Thanks.

I assume you are using Apple's proprietary mail program. If so, you should be able to quickly train it to recognize spam and move it to a spam folder without rules of the sort that you are talking about. Also, most spam that I receive has a subject as part of the teaser to get the receiver to open it.

How to turn off "No Subject" warning window

Hi-
How do I turn off the window that pops up and says "Your message has no subject." I looked in Preferences, but did not see it. Thanks

I hope you can't, and won't be able to turn off the pop-up message... ever. People that send me messages for their benefit need to tell me what they want or the rule I built is that it's Junk.
Rule Name: Blank Subject to Junk
If All of the following conditions are met
Subject Does not contain - a
Subject Does not contain - e
Subject Does not contain - i
Subject Does not contain - o
Subject Does not contain - u
Subject Does not contain - y
Move message to mailbox: Junk
My clients need to learn how to conduct business in the real world, with rules of etiquette, just like the jerks that use all caps.
The good news is that even if you can eventually turn off the popup, my filter rule will still work

How Do I Create a Blank Line Mail RULE ?

I've been getting a lot of Spam that always features friend's email address's and a Blank Subject line. So I would like to create a Rule that if the Subject line is Blank, send it to the Trash.
But of course it won't let me create a rule leaving one of the fields Blank, ie. empty.
My address book has been hacked it would seem because these Spam/Junk messages for a Canadian Pharmacy always have a blank subject line, are addressed from a friend and is Cc'ed to other friends! The pharmacy's address is disguised by another address, which sometimes features something of interest to me, like Architecture! Scary ...

The following rule should do the trick:
For the "If" section, select any or all (doesn't matter when using only 1 condition).
Then select:
"Subject" >> "Is equal to" >> leave the text box empty (deleting contents if any)
For the "Perform Action" section, select "Move Message" >> "Junk"

Empty Subject message

I was wondering if you can change a setting to when you send an email with a blank subject it will not pop up a message telling you that your subject is blank.

Hi Mahesh,
Mail does now warn about sending a message without a subject.
+R

Why do I receive messages with only a date, no subject, no from, no body, etc.?

at varying times I receive messages with a blank subject, no entry in [from, to] no body, but a date in 1969.
Any ideas why I receive these?

Thank you for your help.
I tried emptying the inbox, deleting the 2 files, and restarting TB.
I did the same for Sent and Trash.
I also deleted all .msf files for all inbox sub-folders and for all folders and sub-folders under "My Mail".
the problem persists.
My inbox has many sub-folders and sub-sub-folders should those be moved to My Mail?
Another problem I am having. I do not know if it is related.
I have a stack of filters that move incoming mail into folders. The stack ends with 2 filters.
(1) a filter that checks whether FROM is from someone in my mail lists. It then moves the message into a folder called "Known Sender".
(2) a psuedo-ELSE filter that check whether the subject contains a very improbable string. It put the message in a folder called ") Suspicious".
Sometimes I still end up with folders in Inbox that clearly should be in the two folders, "Known Sender" or ") Suspicious".

Subject to be edited

just seeing if blank subjects can be posted (after I edit the post)...

Hmmm... Now I can't even edit this post.
... or actually I can edit this reply but not the original post ???
I don't think you can edit once you replyThat appears to be the case. So if we make a mistake,
we have to hurry to fix it before someone
posts a subsequent reply. How useful.If you read the new post in Forum Maintenance, that's exactly what it says--you can edit until someone replies. Not sure if that is "any new reply in the thread" or "a new reply that someone created by clicking Reply on your specific post".

*** [BLANK Subject]

Similar Messages

Maybe you are looking for