Blank users appear in the CMC & Phantom JobServerChild processes

We are running BOE XIr2 SP3, FP 3.2
When viewing Home > Servers > xx.CMS, the list often includes an entry with a blank User Name and a session count usually more than 1. The Last Logon Time is almost always within a half hour of when I check the list.
Coincident with this mystery, and perhaps related, is the appearance of JobServerChild processes that have no corresponding active report or LOV. I added the "-maxChildReqs 1 -childProcTimeOut 30" options to the command lines of all Job servers to ensure the Child processes terminate upon completion of their assignments.
The Child processes were terminating correctly before the blank User Name phenomenon arose. Why do I now find several JobServerChild processes running?

For anyone else wrestling with this...
This problem appears to be related to Spry animation. Using
something like...
quote:
var Accordion1 = new Spry.Widget.Accordion("Accordion1
{defaultPanel: xxx, enableAnimation: false});
(where "xxx" equals the panel you want to open)
...at least allows you to open the panel in all browsers.
Sniffing the user-agent and disabling animation conditionally
allows you to keep the sexy animation in Firefox, Safari, etc.
Not an entirely satisfactory solution, but at least it works.
Bill

Similar Messages

  • Blank bar appears at the bottom of the screen on startup.

    When I start firefox, a blank bar appears at the bottom of the screen. The bar does not go away until I open and close the add-on bar (Ctrl + / twice). How am I able to make this bar not appear at start up?

    Hello krintix,
    Can you please attach screenshots of your problem here, it would be helpful for us.
    See this to attach your Snaps here:
    [[How do I create a screenshot of my problem?]]

  • Some users don't appear at the login screen when restarting, only upon logging in as a user who does appear, then logging out. How can I make all users appear on the initial list?

    I've inherited a previously used early 2011 13-inch MacBook Pro at work.
    I now have my own account on the computer, however the account does not show up on the list of users to log in as in the start up log in screen. It will only appear if I first log in as one of the users who do appear, then logout. The background also changes between these two log in screens - the start up one is white whereas after logging out of one user it's the brushed steel background. My account has admin powers.
    Anyone have any ideas how I can make this account also show up on the start up screen?
    Thanks in advance for any help.

    I do think it has something to do with FileVault.
    Under System Preferences -> Security & Privacy -> FileVault I try and click "Enable users" near the bottom (after unlocking with an admin password). If I do this from my own account a green check mark appears next to my name, but upon clicking "done" I received this message after a brief loading period:
    The following users weren’t allowed to unlock this disk because an unknown error occurred: (myusername).
    I tried going into the root account and performing this same process, the first time System Prefences unexpectedly quit, and the second I received the same error as above after clicking the "Enable User..." button next to my account and trying to hit "Done".

  • A blank square appears at the top left corner of my screen after close the preferences window in Mac OS X

    Whenever I open the preferences window and close, a blank square of 120px (aprox) appears at the top left corner of the screen. The square doesn't dissapear untill I exit from Firefox and reopen it.
    [http://cl.ly/5DCr Screenshot] Screenshot

    Can you go to Help > Troubleshooting information and copy and paste everything here?
    This is a [https://bugzilla.mozilla.org/show_bug.cgi?id=641288 known bug] but we need more information on it.

  • Excise Tab is not  appear in the MIGO display  --- Import Process

    Hi Experts ,
    Excise tab is not appear in the display of the material document in Import process.
    Process flow.
    1. Import Po.
    2. Customs clearing (MIRO)
    3. Capture excise invoice against the Import Po.(Reference to MIRO document )
    4.MIGO with movement type 103, in excise tab i selected only refer the excise invoice , here excise ta is coming . Lot is also generated .
    after posting the material document , excise tab is not appearing against  the material document .
    5. post excise against the excise invoice .
    Please help.
    Thanks
    SAP MM
    Edited by: Subbas on Aug 16, 2010 11:58 AM

    Excise captured & posted using J1IEX using 2 step procedure won't appear in MIGO screen.
    Display excise invoice using J1IEX(using vendor excise inv. no. or internal document no)
    Only excise captured & posted in MIGO(Single step) will be appear in display of MIGO screeen.
    Check SAP Note 952287 - CIN: Limited Functionalities in Country Version India -CIN -Q.no.5
    5. Incoming Excise Invoice capture at Blocked stock 103 is not
    supported in CIN.
    The capture of incoming excise invoice is strictly advised to carryout at
    unrestricted stock and not at blocked stock(103/105) due to architectural
    issues. The capture at blocked stock may cause wrong excise posting.

  • Blank user displayed in the "Page Views Per user"

    Hi everybody,
    When I display my Application "Page Views By user" statistic bars digram (by going through
    Home>HTML DB Workspace Administration>Monitor Activity>Page Views by User), I have a blank username that is displayed with a certain number of page views. Does anybody know what this comes from?
    Thanks!
    Karina

    Visits to the standard login pages will be recorded this way.
    Scott

  • Unwanted Blank line appearing in the output

    Hi all,
    we are trying to print the line items of a Order.
    There is no issue in first page. But in second page, after prinitng the first record...a blank line is coming followed by the second record.
    Now, we need to remove this blank line.
    There is a check box at the end of each record and the field which is prior to this check box has got offset. Tried to remove this offset and check...but it didn't work.
    As the first page output is perfectly fine and the issue is with the second page ( output has got 2 pages in total ), I believe
    something has to do with the page break setting.
    Any inputs on this would be of great help.
    Thanks in advance,
    Narayan.

    Could be caused by many reasons.
    Is the paragraph format set to skip a line the first time it is printed (SPACE AFTER setting)?
    Is the data causing it to overflow across the line?
    Is there a line feed in the actual SAPscript (like a "/" paragraph format)?

  • If I don`t reload pages, a blank screen appears with the page loading forever, since I updated to firefox 6.

    I already tried cleaning cache, cookies and registry. I disabled add-ons. I deleted data trash. Virus scan with MS security essentials. Called Internet company to check connection. Had to get a new modem and router, but the problem persists. No problems though when using Internet Explorer.
    It doesn`t happen always and with every webpage. Sometimes it happens with MS hotmail, sometimes not.
    As soon as I reload the page that didn`t load the first time, the page comes usually up at once.

    I already tried cleaning cache, cookies and registry. I disabled add-ons. I deleted data trash. Virus scan with MS security essentials. Called Internet company to check connection. Had to get a new modem and router, but the problem persists. No problems though when using Internet Explorer.
    It doesn`t happen always and with every webpage. Sometimes it happens with MS hotmail, sometimes not.
    As soon as I reload the page that didn`t load the first time, the page comes usually up at once.

  • How do I get system users/groups to appear in the Workgroup Manager list?

    When I open the Workgroup Manager and select the Users tab, it only shows users set up in the Workgroup Manager -- same when I browse Groups. But, I also have a couple system users/groups set up not in the workgroup manager, but through the OS's System Preference interface for Users.
    Is there a way to automatically have System users appear in the Workgroup list?
    I also can't add users to System groups, since the groups also won't appear in the Workgroup Manager (like adding a user to the group Admin or Staff -- default system groups).
    I'd just like the option to "show System users and groups" somewhere.
    Thanks.
    Patrick

    Hi
    If I understand your post correctly then launch WorkGroup Manager and select Preferences from the WorkGroup Manager Menu. Enable the Show "All Records" tab and inspector option and click OK. In the Users/Groups/Computer tab you should now see the addition of another icon - it looks like a bullseye. Select this and under the filter field selecting 'AccessControls' will show you a long list. Scroll down and select Users. Now go back to the Users tab and you should see all users visible and invisible. You’ll see the same thing for Groups.
    You will see different Users and Groups depending which directory node you are in. In the LDAP node you should only see Directory and System Administrator as well as VPN MPPE Key Access User in addition to any user you have created within that node. In the local Net Info node you should see users such as Amavisd User, Clamav User, Cyrus IMAP User etc. You’ll also see UIDs and GUIDs amongst a wealth of other information if you select a user or group and select the Inspector tab.
    You can modify record attribute and values as well as adding your own. You can even use WGM in the same way you would use Net Info Manager locally if you wish.
    Tony

  • How to avoid the user accounts to appear in the disk boot while installing Yosemite?

    Hi, there is an issue when I encrypt the disk in Yosemite, when I make a clean installation, I first format partition with encryption, install system and restart computer, in the first boot the system ask only for disk password then continue creating user account, when I finish the configuration and restart the computer, the first boot screen ask me for disk password or user password, this is wrong, I want that the system ask me first the disk password and then the users accounts passwords to start the session as it was in Mavericks, so I try different ways to do this.
    1. In clean Installation is not working, every time that create a user it appears in the first boot screen, in which the system must ask only for disk password.
    2. In upgrade Installation with a computer already encrypted, it appears to works properly but if you create a new user it appears in the first boot screen.
    3. I test this by doing a clean installation without encryption, create a user and make an image of this partition, then I copy the dwg image to an external disk, then start computer with an USB with Yosemite, using disk utility I erase the partition and format it with encryption, then restore the dwg image in this partition, it looks that works properly, but if I create a New User then the new user appears in the first boot screen when only must ask for disk password.
    Can someone help me with this issue please?
    If there is someone of Mac can you tell me if this is going to be corrected in this version? or we must wait for the next OS X version.
    Thank You.

    Hi, there is an issue when I encrypt the disk in Yosemite, when I make a clean installation, I first format partition with encryption, install system and restart computer, in the first boot the system ask only for disk password then continue creating user account, when I finish the configuration and restart the computer, the first boot screen ask me for disk password or user password, this is wrong, I want that the system ask me first the disk password and then the users accounts passwords to start the session as it was in Mavericks, so I try different ways to do this.
    1. In clean Installation is not working, every time that create a user it appears in the first boot screen, in which the system must ask only for disk password.
    2. In upgrade Installation with a computer already encrypted, it appears to works properly but if you create a new user it appears in the first boot screen.
    3. I test this by doing a clean installation without encryption, create a user and make an image of this partition, then I copy the dwg image to an external disk, then start computer with an USB with Yosemite, using disk utility I erase the partition and format it with encryption, then restore the dwg image in this partition, it looks that works properly, but if I create a New User then the new user appears in the first boot screen when only must ask for disk password.
    Can someone help me with this issue please?
    If there is someone of Mac can you tell me if this is going to be corrected in this version? or we must wait for the next OS X version.
    Thank You.

  • Unwanted blank pages appearing in 7.0.5 (but working in 9)

    I'm trying to create a form which has a front page and three optional additional sections that appear when the respective buttons are clicked. I need the form to work in Reader 7.0.5
    I've got it working just fine in LiveCycle 8.2 and Acrobat 9, but when it is opened in Reader 7.0.5 three blank pages appear after the front page, and as the optional sections are opened, they replace/fill-up these blank pages.
    Any help would be most gratefully received!
    Details:
    The form is targeted to 7.0.5 and saved as a dynamic XML form.
    I am not seeing any warnings, but when switching to Preview PDF, I do see the following under the log:
    "Invalid version: the current version of the XFA template model exceeds the capability of Acrobat/Adobe Reader 7.0.5"
    The buttons to reveal the page have the following formcalc scripts:
    Form.Top.OnePager.FrontPage.MoreInfoButton.Hide::click - (FormCalc, client)
    MoreInformation.presence = "hidden"
    Hide.presence = "hidden"
    Show.presence = "visible"
    Form.Top.OnePager.FrontPage.MoreInfoButton.Hide::initialize - (FormCalc, client)
    MoreInformation.presence = "hidden"
    Hide.presence = "hidden"
    Show.presence = "visible"
    etc

    Could be caused by many reasons.
    Is the paragraph format set to skip a line the first time it is printed (SPACE AFTER setting)?
    Is the data causing it to overflow across the line?
    Is there a line feed in the actual SAPscript (like a "/" paragraph format)?

  • CCS-Blank screen appears when Comm Management Profile is assigned

    Hi,
    We are trying to configure the contact center simulator on CRM 2007.
    but when we assign the comm management profile to the business role- ic_agent a blank screen appears on the UI , if we remove the same , view on UI  seems to be fine with all the links.
    If any of you have faced a similar issue please let me know how this can be resolved.
    Regards
    Prathiba

    Hi,
    Have you done the Communication Management Profile configurations and settings appropriately. To be specific please ensure that you have taken care of the following:
    Maintain communication management software profiles in the Customizing activity
    1. Define Communication Management Software Profiles.
    2. Assign the communication management software profile to a business role in the Customizing activity Define Business Role.
    3. Maintain communication management software system settings in the SAP Easy Access Menu by choosing Maintain System Settings.
    4. System administrators define the communication management software channels and queues in this activity.
    5. The Com Mgmt Software System ID must have the same value as the Com Mgmt Software System ID in Maintain Communication Management Software Connections (Prerequisites).
    6. You must maintain this activity in each system instance, for example, development, test, and production.
    7. Assign communication management software profiles in the SAP Easy Access Menu by choosing Assign Profiles.
    8. System administrators assign communication management software queues and channels to profiles in this activity.
    9. You must maintain this activity in each system instance, for example, development, test, and production
    Please go through the following help
    http://help.sap.com/saphelp_crm60/helpdata/en/45/f06320312c3112e10000000a1553f7/frameset.htm
    Regards,
    Deepak

  • I recently upgraded to iOS 7.0.  When I open Safari to a blank page, a small "Settings" icon appears against the white background.  When I click on it, it opens  a link to a web page that is not among my other bookmarks.  How can I get rid of it?

    I recently upgraded to iOS 7.0.  When I open Safari to a blank page, a small "Settings" icon appears against the white background.  When I click on it, it opens  a link to a web page that is not among my other bookmarks.  How can I get rid of it?

    Leliforever, cheek you list of installed add-ons, the Ask toolbar can be installed without the users knowledge.
    For checking other extensions that may cause this, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and  nothing pop up. How to resolve this issue?

    I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and  nothing pop up. How to resolve this issue?

    Hi, bamboo64. 
    Try closing all open applications in multitasking and power cycling the device.  Once this is done test the results.  If the issue persists, I have included a couple troubleshooting articles that I would recommend going through. 
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Troubleshoot issues on an iPhone, iPad, or iPod touch
    If you haven't been able to connect to the iTunes Store:
    Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
    Note: Time Zone may list another city in your time zone.
    Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
    Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
    Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
    Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
    Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
    Try resetting (turning off and then on again) your Wi-Fi router.
    If the issue persists, try troubleshooting your Wi-Fi networks and connections.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Cheers,
    Jason H. 

  • Safari users see my web pages as blank, until they click the screen

    Our company web page works well in Internet Explorer and Firefox, but using Safari some pages intially appear blank until they are clicked on. Once the user clicks in the safari window, the page loads instantly.
    The pages that appear blank seem to vary from user to user. On this mac with Safari 1.3.2, it rarely happens - only when I click on a thumbnail to view the full size image. On another mac running Safari 2.0.3, it happens on every single page.
    I created the site with another co-worker using Dreamweaver, but both of us were learning as we went along. A friendly web developer I ran into suggested the problem might be to do with using 'padding' in our css and 'cellspacing' in our tables. We used both these to define the look of the universal grid we use on all our pages.
    If this is the case, then it would seem to require rewriting every one of our web pages so that they don't use the offending system, but still look the same.
    The website in question: www.birdsportchmouthrussum.com
    Does anyone here know what is causing the problem? Was this developer correct? Is there a simple way to correct it? I really would not like to have to re-write all our pages. I'm not even sure how to accomplish the look we want by another method.
    Where else can I look to for help and advice on this issue?
    Thanks,
    Adam
    iBook, PowerPC G5, Mac Mini   Mac OS X (10.3.9)  

    Tom,
    Thanks for replying. The problem does not occur when I follow your link - which you believe would suggest it lies with frameset forwarding.
    After a quick google to find out what frameset forwarding is, it seems I should switch to a redirect forwarding instead? What would you advise? \
    I am relieved the problem is not to do with the code. I was worried I would have to re-write the code.
    Thanks,
    Adam

Maybe you are looking for