Blinking file and question mark does not go away

My imac is constantly showing this blinking file with a questionmark when starting it. I tried all kinds of things to bring it back to life, like cmd + R, holding the shift button, c button and other stuff but none of them works. Could anyone plese help?

I take it you don't currently have backup to an external disk - Time Machine or a clone?
Here's some instructions for backing up, although you need a working Mac to be able to do it. Obviously, this shows how vital it is to always keep current backup so you have a recovery plan before disaster strikes:
http://support.apple.com/kb/ht1553
Hopefully you won't need to erase your data - repairing the disk, or simply re-installing the OS should not erase anything. Only an erase and install does that. You'll need backup if it turns out your hard disk is kaput (possible).
If the Mac currently has either 10.8 or 10.9 installed does booting using Command+r not do anything?
If it doesn't you can try putting the Leopard disk in the drive and booting holding Command + c - hopefully it'll boot and allow you to run Disk Utility to check/repair the disk - NOT to re-install the OS. If it does boot, at the first screen select your language and from the next screen, from the menu bar, select Utilities>Disk Utility. Select Macintosh HD>Repair Disk. If anything gets fixed click on repair disk again until you get a clean pass. Once done restart as normal from the Apple menu.
If all that comes to nothing I think it's off to the repair centre.

Similar Messages

Photoshop does not close files and the program does not quit.

I have been on the phone with tech support for over an hour. Photoshop does not close files and the program does not quit. I am on a Mac and I am using Photoshop CC 2014.

Have you tried uninstalling Photoshop CC and re-installing? Another thing to try is to remove all Photoshop CC plist files. There is also the Cleaner tool:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Processor type of the file and the device does not match

We ve the following problem with Zfh 7 sp1. When trying to distribute a
application we receive the message failed. When i open the log is see the
below message.
The processor type of the file and the device does not match.
I ve searched on the message and i ve seen that it is a know error and it
should be fixed in SP1
10100578 - ERROR: Skipped installation of file on device <DEVICE(Username)
> GUID <XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX>. The processor type of the
file and the device does not match.?
The processortype of the device is StrongARM and also from the
applications. Also when i put it on ALL/CEF it won't distribute.
Does some other people also have this problem.

Mail,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Can't log in white screen with flashing file and Question mark

I've been have trouble with getting on line and screen freezing up. Now I have a solid white screen with a icon of a file and question mark on it flashing. Iv tried unplugging and resetting with no luck.

Have a look at > A flashing question mark appears when you start your Mac
Dennis

File and question mark when starting

Flashing file and question marl when i start my computer

There are four general causes of this issue:
1. The computer's PRAM no longer contains a valid startup disk setting when there aren't any problems with the disk itself. This can be checked for by pressing the Option key and seeing if the drive appears.
2. The internal drive's directory structure has become damaged. This requires usage of an alternate bootable system to perform the repair.
3. Critical system files have been deleted. This requires usage of an alternate bootable system to reinstall them.
4. The internal drive has died or become unplugged. This is the most likely case if the computer took a sharp impact or there are unusual sounds coming from its location.
(103563)

HT4528 I have popup to remind me to backup to the3 cloud and the popup does not go away irrespective of how many times I press the OK button!

Anyone has the same problem -- I have a popup reminding me to backup to the iCloud and did does not go away?

Please correct you profile, iPhone 4 do not have IOS 6.1.4.
Do a reset
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

Catalogs, Missing Files, and Question Marks for Beginners

Hello, fellow non-power-users. I just wanted to post something here that I've learned with my travails and travels using LightRoom 3. In the past, Adobe has paid me to write for them, and I'm a professional writer. So why am I doing this for free? Because I wish to heck I'd understood this stuff before I dove into LR. Somehow, even with reading a book on the program, I didn't really get it.
1) Most of the people who are kind enough to post and help on Adobe support and other forums on the Interwebs are power users of Lightroom. The great thing is, they often know what they're talking about. The bad thing is, many of them don't understand what it's like to be a non-power-user who really has no intention of becoming a power user. Be very, very careful before you try to take their advice about any large issue that might have serious consequences for your photos.
2) LR has about forty million ways to do things, so it can be overwhelming, and you may also receive lots of contradictory information about how to accomplish stuff. If you're like me---not a professional photographer, more a refugee from the annoying land of iPhoto who just needs a *little* more power and customization---you may have trouble streamlining, figuring out the few things you actually need the program to do for you. Try some introductory videos and tutorials, even books, but don't expect them to solve your real problems with the program.
3) Before you begin, grasp a few concepts:
     a. When you're working in LR, you're working with a "catalog." It shows you images of your photos, but these aren't really your photos. Your actual photos are *files* that live on your computer somewhere. Think of it as a slideshow projected on a wall: you can see the photos on the wall, but they aren't the "real photo." If you walked up to the wall and painted on the projection of a slide, the "real photo" file would not be changed. What LR does is keep track of those wall paintings for you, so if you wanted to print up a version of that slide and include your brush strokes, LR could do that for you. The catalog is a type of database.
     b. So where are those real photos, those files? Probably all over your computer in different places. You may want to consolidate them all in one place before you start using Lightroom. Here's why: once Lightroom thinks your "real photo" is in a certain place, it doesn't want you to move the "real photo" file. Say you have a photo called that someone sent in email. You put it on your desktop. Now you are tempted to drag-n-drop it onto Lightroom. DO NOT DO IT. Because someday, you might want that photo to not clutter up your desktop. You'll drag it to another folder on your hard drive, and BOOM, now Lightroom cannot find the photo.
You can't work on the photo from within Lightroom. You can't print it. Lightroom will show a question mark ? on its wall-projector slide of your photo file. Often when someone moves files on their computer, it's not a single file on a desktop. It's a bunch of things they are trying to organize. Adobe knows this, which is why they have a "find missing photos" command. They know you are likely to screw this up. The command will show you those missing files. You have to select them individually by hand and search your computer for them to relink. You can spend a lot of time relinking photos. It sucks. Really sucks.
     c. If you do need to move stuff, Lightroom does let you do it, but only from within the program. So, open up LR, and look in the left-hand column for an item called "Folders." (You will be in Library mode to make this happen.) You can move your "real photo" files around from within this area. It is a clunky process and an enormous pain in the butt.
     d. Rant time: For some reason, one of the most sophisticated and long-lived software companies in history, the developers that completely changed the worlds of art, design, photography, and publishing--you got it, Adobe--have not been able to solve this problem and chase down your real photo files if you moved them from within the Finder, the way you normally move files on a computer. Go figure. (Irrelevant note: I've been using their products since Pagemaker 1.0 and it's sort of astonishing that they've never solved this problem, in LR or InDesign or elsewhere. It's like publishing a magazine using Quark in 1995, rushing to find the messed-up links before you hand-carry your ZIP drive over to the printer. Hee hee.)
4) Decide whether you want to divide your photos into a few separate catalogs, or whether you want one enormous catalog ("master catalog"). Then try not to change your mind.
Here is my story:
Summary: I started with multiple catalogs and regret merging them into one.
I hired a photographer/supposedly-LR guy to set up my LR and he suggested multiple catalogs, each easily saveable (catalog AND its photos) to a single external hard drive. I only made two: one for family photos, one for a big art project. Whenever I asked questions online about using LR, everyone told me to combine all photos into one big master catalog. Eventually I did, and I regret it. As a non-power-user, I screwed up something in the merging process, and ended up with a lot of question-mark, missing-photo problems, and a bunch of duplicate photos to boot. What a waste of time.
If you're not a pro, you probably don't need a gigantic single database to deal with. If you're someone who uses Dropbox or another non-Adobe cloud method to store and work with your photos, and you don't have unlimited storage, you may find it way more convenient to have a few different catalogs.
Power users probably don't screw up the process of merging all their catalogs into one. Power users have, from what I've read online, many complicated ways of making a big master catalog work the way they want, say for working on small numbers of files while traveling with a laptop, and then getting that work into the giant master catalog when they get back home to their studios.
But I am not a power user, and if you're reading this, you probably aren't a power user either. So perhaps my experience will be useful to you.
5) Paying for plug-ins to help with all this nonsense.
You can buy plug-ins that help you do things this application should already do by itself. For example, "Duplicate Finder" goes through and finds all the photos that you've accidentally imported more than once into your catalog. Then you can painstakingly go through, figure out which copy to keep, and delete them. Often, these "duplicate" photos are not duplicates of your "real photo" file. But at some point you moved your "real photo" file while you were tidying up your computer files, and later accidentally re-imported that photo into your LR catalog. Since LR doesn't follow your files around when you move them from within your computer/Finder, LR thinks it's a whole brand-new file. It's like your projector is projecting three images on the wall at the same time. You have to figure out which one to keep, which one will save your wall-painting changes, etc. And it is a huge pain in the butt.
Note that you can click a box when importing photos, a box that says "Do not import suspected duplicates." This can be really helpful for avoiding duplicates in the first place. It is not, however, infallible.
OK, I hope this helps someone somewhere. I'm going to go back to the horribly time-consuming task of relinking files and trying to make my brain work the way LR's brain works.

Glad to help!
Another good thing to do from time to time is to boot from your install CD, then choose "Disk Utility", then do a check (and repair, if necessary) of your boot disk.
You can't verify or fix a disk you've started from, thus the need to boot from a CD. You can boot from a second hard disk to do this test if it has MacOS on it.

Blinking file folder question mark on start up!

My mac was working fine I shut it down because the mouse froze like it does some time. It turned back on with a white screeen and and a blinking file folder with a question mark on it and stays that way until it shuts down! Its a white screen behind it and it makes the start up noise. What is going on and how can I fix it? I already kept it off for a while then took out the battery.. any other suggestions?

I got this same message after using Disk Utilities to create a new partition formatted in FAT 32, booting from my windows XP CD, reformatting that partition to NTFS, and installing Windows XP on that partition. (So I can dual-boot without using Boot Camp Beta, which is expired)
I worked around it just fine by holding the "alt" key when booting, which (after entering my firmware password) allows me to select the boot partition. It's like I somehow selected "Neither" for my default startup disk.
It's possible that your problem goes beyond this.
By the way, in my Windows reformat, I did end up deleting several 200 MB partitions that appeared on my drive...it looked like this:
(partition) (size) (name) (file format)
Partition 1: 198 MB [unknown empty
Partition 2: 250000 MB [Windows FAT32
Partition 3: 202 MB [unknown empty
partition 4: 850000 MB [Unknown unknown
this one is formatted in the mac file system, but XP (of course) doesn't
recognize it....
partition 5: 201 MB [unknown empty
Anybody know what's going on here? I sucessfully merged the first three from the XP cd, but I don't know what's up with Disk Utility and why it leaves these spaces after partitioning.....

MacBook Pro starts up with blinking folder and question mark in it. Is there a fix to this issue or has the HDD crashed for good?

I startup my mac and I see a white screen background with a folder icon in the center and a question mark blinking in the center. Called Apple and the rep says this is probably a HDD crash. Only solution is to take it into a Apple store and get a replacement HDD which would cost $300 and upwards. This mac book is about 15 months old and cost $1300. Needless to say I'm highly upset. Does anyone have a fix to this?

Flashing folder with question mark?
Go step by step and test.
http://support.apple.com/kb/ts1440
Startup Manager to select Startup disk.
http://support.apple.com/kb/HT1310
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
Reset PRAM.
http://support.apple.com/kb/PH4405
Reinstall OS X
http://support.apple.com/kb/PH10763?viewlocale=en_US

Flashing file and question mark symbol

My Mac is alternating between displaying a flashing file with a question mark and the prohibitory symbol. I tried holding down the option key after restarting but nothing is working. I updated my OSX Lion last night, but I don't know what update it was. I need this computer working in the next 3 hours. Please help!

Are you able to boot into Single User Mode?
Mac OS X: How to start up in single-user or verbose mode
If so, perform a disk check via the command line:
Start up your computer in single-user mode to reach the command line.
Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
At the command-line prompt type:
/sbin/fsck -fy
Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
** The volume (name_of_volume) appears to be OKIf fsck found issues and has altered, repaired, or fixed anything, it will display this message:
***** FILE SYSTEM WAS MODIFIED *****
Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
When fsck reports that your volume is OK, type reboot at the prompt and then press Return.

Peak files and audio conforming does not automatically happen unless I restart premiere

Am I the only one that this is happening to? Ever since I updated to version 8. Peak files and conforming doesn't happen unless I restart Premiere.
Here's also another question. If there is a preference for "automatic peak file generation" then how do I manually generate a peak file and force conforming?
obviously, yes automatically generate a peak file. OK not automatically doing it, let me do it manually without having to restart the whole program.

I am having the same issue. In addition to the peak files not automatically generating unless I restart Premiere, Not all of the Media Cache Files go into the custom directory I specify.
PP 2014.0.1
Win 7 Pro

HT1343 Mac book pro. pushing shift 6 for question mark does not work . Instead I get an up aroow . How do i fix this .

When I try to insert a question mark I get an up arrow . Shift 6 should give a question mark but does not . How do I change this .

Take a look at:
http://airparrot.com
The ML mirroring is hardware encoded (supposedly via a post 2011 Intel chip feature).
This attempts the same in software.
AC

MacBook Air has black screen with file and question mark

Some one please help me. My screen on my MacBook Air is black with a flashing file and a question mark. I Can't get past this. What do I do? Thanks.

Click here and follow the instructions.
(123289)

Dreaded Gray screen with Folder and Question Mark (EFI Boot poofs away)

Hey--
I've had trouble with my Imac that I purchasd in 2005 for a year and a half or so. I had a gray screen about a year and a half ago, went on vacation for a week, came back and it booted just fine. Another time it went down, I did a safe boot and it came back. I've tried Command-Option P+R before with some success. I had a boot camp partitioned windows xp drive on there also (I don't know if this matters, but wanted to mention that). I've also tried putting the installation disk in there with no luck (thinking it would find the software on it)
I put it away because I moved and dragged it out of storage to see if a miracle might have occured since the last time I tried 5 months ago. Well, same thing--gray screen with a flashing folder with question mark. I read in the discussions to hold the option key down to select a book device. I tried this and got an EFI Boot icon with a mouse pointer, but when I go to select it it "poofs" away (literally, the icon POOFS away) before I can select it with the mouse pointer icon.
Has anyone seen anything like this or have any suggestions? I guess I'm at my wits end and am ready to haul it down to the Apple store to get the prognosis (I'm sure it will not be good--probably shot hard drive or something). I'm hoping this can be salvaged without much cost.
Thanks so much for any advice or input you might have.
Chris

How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.
If yours is an Intel model, then I recommend getting Snow Leopard to upgrade OS X, but I would recommend first erasing the drive before installing Snow Leopard.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

I have rebooted my computer over 20X and performed the soft reset and the option command p.r. my iMac still gives me the gray screen with the file and question mark.

I have been having issues with starting up my computer for the last 5 weeks it started with a loud clicking sound when starting up and it use to only take turning the computer off and on a few times to get it running. This week it has taken almost a day of me turning off the computer and turning it back on. Last night I did the soft reset and it did come on. I did not shut down the computer and when I returned to it this evening I had to force it to shut down because it was stuck.I have did the soft reset and sad to say it did not work.I decided to try the option command and pr to reset it it did not work do any one have any other suggestions?

You can get a decent new hard drive for $100, plus labor to install it if you're not comfortable doing it on your own. In contrast, a new computer will cost quite a bit more than that. Of course, if that iMac is very old at this point - like, say 6 or 7 years old - the new drive may be worth more than the computer, and you could use this as an excuse to buy a new one!

Blinking file and question mark does not go away

Similar Messages

Maybe you are looking for