Block and character special files

What is the difference in semantics between block and character special files on Mac OS X?
In the olden days, character special files were intended for serial character-oriented devices such as teletypes, printers, modems etc. not capable of seeking and block special files were intended for seekable block-oriented devices such as winchester disks etc.
But nowadays, Apple uses /dev/rdisk* as the raw (unbuffered) hard disk device, and it is a character special file, and it is seekable. /dev/disk* on the other hand, is buffered, slower, and a block character special file.
Is there still any semantic difference at any O.S. level between these two kinds of special files, or is it all entirely up to the driver designer and it only effectively provides us with one more bit for the device number?

Hi,
Is there still any semantic difference at any O.S. level between these two kinds of special files
As you write, a block device is bufferd by OS, while a character device is not bufferd by OS (=raw device).
In the olden days, character special files were intended for serial character-oriented devices
Even in olden days, I guess a seekable mass storage had both block and character devices; the latter is for partitioning, disk diagnose, backup, etc. Only block devices can be mounted.
Serial (un-seekable) device can only be a character device, I guess.

Similar Messages

Differences between block special device and character special device

Hi,
I tried to figure out the differences of block and raw devices and try to understand when to use each type of device. To me they are about the same. Can someone enlighten me? For e.g "/dev/dsk/c0t0d0s5" and "/dev/rdsk/c0t0d0s5". I noticed that in "/etc/vfstab", the mounting process always use a block device whereas the fsck process always use a character device, I'm getting confuse about their differeces.
Thank you for your help!

I cannot speak for CS6. Here are thoughts from a new APE11 user's view:
adobe30022 wrote:
Our needs for a video editor are very simple. We need to create simple titles and text overlay to show the name of the speaker and/or topic.
APE11 provides simplicity and good functionality for this stated need.
we would like to sync up the video with this audio. Can this be done in Adobe Premiere Elements 11?
If your video and audio contain a clap, you can manually sync by sliding the audio peak along the video. The audio wave form will be blanked out when sliding, with a frame counter showing how many whole frames you have moved the audio at each moment, so it is a "drag, stop, compare, drag another frame or two, stop, compare" process that works. (Finer adjustment than whole frames is not possible.) Once the sync is achieved, select both audio and video track and link them. (The stability of the sync over time will depend on the accuracy of the recorder, and can pose a problem in long recordings. )
increase the gain/volume for the audio or clean up some hum or background noise. Can this be done in Adobe Premiere Elements 11?
APE11 allows adjusting the volume levels and also provides level normalization if desired, but more involved audio cleanup such as hiss and hum removal, compression, or auto gain are not available.
Please let me know if Adobe Premiere Elements 11 can help us meet our needs. If there is any other software that would be more suitable please advise.
You should download the APE11 trial to judge for yourself how well it will meet all your needs.

File Name and Path special field

Post Author: puser01
CA Forum: .NET
I have a report created in CR 9 with the File Name and Path special field on the report displayed correctly. when i try to run it on CR XI environment i get this:
C:\WINDOWS\TEMP\{4D86438D-54F5-4EEF-A0AB-05D5EB2BFF35}.rpt
How can i correct this?

Our installer names don't make it easy for the new user, or the seasoned veteran for that matter. Although both those installers have 2008 in the name, they are for entirely different products.
CRRedist2008_x86.msi
This MSI installer is used to install the runtime for Crystal Reports Basic for Visual Studio 2008 - version 10.5.
cr2008fp35.exe
This installer package is used to install the CR .NET runtime for Crystal Reports 2008 - version 12.3.
Since you've updated your development system to Crystal Reports 2008 you'll only want to use the runtimes listed on this reference page - http://www.sdn.sap.com/irj/sdn/crystal-xcelsius-support?rid=/webcontent/uuid/10e38d93-7f07-2d10-beae-e739182f8ada. [original link is broken]
I suggest either of these
SP 3
https://smpdl.sap-ag.de/~sapidp/012002523100007123592010E/cr2008sp3_redist.zip
FixPack 3.5
https://smpdl.sap-ag.de/~sapidp/012002523100006341772011E/cr2008fp35_redist.zip

How to store character in file and display result on front panel

hi
currently i m working on FPGA project.i want to aquired data from FPGA board.i want to know about how to store character to file and contineous display each character on front panel in string format.
i have complete up to character display on front panel but only single character display when i want all character in string format.
Solved!
Go to Solution.

I don't see how this question is at all related to Digital I/O but it sounds like you just need a shift register with the concantanate string function.

Vbscript to rename files and replace special characters

Dear Exprt,
would you please help to add addtional requirement for rename and replace special characters for file
by the below script i can re name.
strAnswer = InputBox("Please enter folder location to rename files:", _
"File rename")
strfilenm = InputBox("Enter name:", _
"Rename Files")
Set FSO = CreateObject("Scripting.FileSystemObject")
Sub visitFolder(folderVar)
For Each fileToRename In folderVar.Files
fileToRename.Name = strfilenm & fileToRename.Name
Next
For Each folderToVisit In folderVar.SubFolders
visitFolder(folderToVisit)
Next
End Sub
If FSO.FolderExists(strAnswer) Then
visitFolder(FSO.getFolder(strAnswer))
End If
[email protected]

Thx would you please look below what wrong in its run nothing happend no error
strAnswer = InputBox("Please enter folder location to rename files:", _
"Test")
strfilenm = InputBox("Enter name:", _
"Rename Files")
Set FSO = CreateObject("Scripting.FileSystemObject")
Set regEx = New RegExp
'Your pattern here
Select Case tmpChar
Case "&"
changeTo = " and "
Case "/"
changeTo = "_"
Case Else
changeTo = " "
End Select
regEx.Pattern = tmpChar
Sub visitFolder(folderVar)
For Each fileToRename In folderVar.Files
fileToRename.Name = strfilenm & fileToRename.Name
fileToRename.Name = regEx.Replace(fileToRename.Name, tmpChar)
Next
For Each folderToVisit In folderVar.SubFolders
visitFolder(folderToVisit)
Next
End Sub
[email protected]

When I try and save a file Photoshop crashes "McAfee blocked suspicious activity-Buffer overflow"

I never had this problem before. When i try and save a file Photoshop just fails instantly crashes and I get this error message from McAfee software:

Well, you could just make your firewall behave and create an exception rule as the warning suggests... It's unlikely that this is PS itself, anyway. Eitehr it's a flakey driver or a cracked plug-in you may be using (not implying anything here, so keep cool) may produce a wrong hash value/ signature and trigger the alarm.
Mylenium

I can't save and open .ai files.

Hello.
I can't save and open the file with special character in virtual drive(using communications). -> refer to this.. ( http://software.naver.com/software/summary.nhn?softwareId=MFS_105031 )
*Special character I used is 黒(not 黑).
If I rename the file name(黒.ai -> test.ai), the file is opend successfully.
And when I save the file as "Illustrator ver.8 format", the file is saved well.
This is the error message I have.
- open : this file cannot be found.
- save : The file may be read-only, or another user may have it open. Please save the document with a different name or in a different folder.
Please answer me~.
Version : Illustrator CS5
OS : Windows 7 32bits

Firefox now always stores the old session, and you can access it by going to the History menu and selecting "Restore Previous Session"
If you want Firefox to display the message to save the session, it can be turned back on by changing some preferences.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
# Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning'''

Replace read character from file

HI,
I have updated my labview 2014 and have a load and save function wich not working on the new version.
It says that the read character from file is not supported any more.
How to i fix it to run in labview 2014?
Attachments:
Load.png ‏62 KB
Save.png ‏365 KB

Bob_Schor wrote:
Please do not attach tiny pictures of your VIs (I can't see them clearly). Instead, attach the VIs, themselves -- this lets us open them in LabVIEW, see if there are any broken arrows, read the error messages, and actually try your code (any test any fix we might suggest). Help us to help you.
Do you know about Snippets? This is what looks like a .PNG file, but can be dropped in a LabVIEW Block Diagram to become executable code. Find it on the Edit menu of the Block Diagram.
Bob Schor
HI,
OK, I have now attach my VIs.
//Ronny
Attachments:
Save.vi ‏11 KB
Load.vi ‏11 KB

To upload a RTF and a PDF file to SAP R/3 and print the same through SAP

Hi,
I have a requirement to upload a PDF file and a RTF file to SAP R/3 and print the same.
I wrote the following code for uploading a RTF file to SAP R/3 and print the same. However, the problem is , the formatting present in the RTF document( bold/italics..etc) is not being reflected when I do the 'print-preview' after the executing the code below :
report z_test_upload .
data: begin of itab occurs 0,
         rec type string,
      end of itab.
data: options like itcpo.
data: filename type string,
      count type i.
data: filetype(10) type c value 'ASC'.
DATA: HEADER LIKE THEAD    OCCURS   0 WITH HEADER LINE.
DATA: NEWHEADER LIKE THEAD    OCCURS   0 WITH HEADER LINE.
DATA: ITFLINE LIKE TLINE    OCCURS   0 WITH HEADER LINE.
DATA: RTFLINE LIKE HELP_STFA OCCURS   0 WITH HEADER LINE.
DATA:   string_len TYPE i,
        n1 TYPE i.
selection-screen begin of block b1.
parameter: p_file1(128) default 'C:\test_itf.rtf'.
selection-screen end of block b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
CALL FUNCTION 'F4_FILENAME'
       IMPORTING
            file_name = p_file1.
start-of-selection.
move p_file1 to filename.
call function 'GUI_UPLOAD'
     EXPORTING
          filename                = filename
          filetype                = filetype
     TABLES
          data_tab                = itab
     EXCEPTIONS
          file_open_error         = 1
          file_read_error         = 2
          no_batch                = 3
          gui_refuse_filetransfer = 4
          invalid_type            = 5
          no_authority            = 6
          unknown_error           = 7
          bad_data_format         = 8
          header_not_allowed      = 9
          separator_not_allowed   = 10
          header_too_long         = 11
          unknown_dp_error        = 12
          access_denied           = 13
          dp_out_of_memory        = 14
          disk_full               = 15
          dp_timeout              = 16
          others                  = 17.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
loop at itab.
string_len = strlen( itab-rec ).
n1 = string_len DIV 134.
ADD 1 TO n1.
DO n1 TIMES.
    rtfline-line = itab-rec.
    APPEND rtfline.
    SHIFT itab-rec BY 134 PLACES.
ENDDO.
endloop.
HEADER-TDSTYLE = 'S_DOCUS1'.
HEADER-TDFORM = 'S_DOCU_SHOW'.
header-tdspras = 'E'.
CALL FUNCTION 'CONVERT_TEXT'
EXPORTING
CODEPAGE               = '0000'
    DIRECTION              = 'IMPORT'
    FORMAT_TYPE            = 'RTF'
   FORMATWIDTH            = 72
    HEADER                 = header
    SSHEET                 = 'WINHELP.DOT'
    WITH_TAB               = 'X'
    WORD_LANGU             = SY-LANGU
    TABLETYPE              = 'ASC'
TAB_SUBSTITUTE         = 'X09 '
LF_SUBSTITUTE          = ' '
REPLACE_SYMBOLS        = 'X'
REPLACE_SAPCHARS       = 'X'
MASK_BRACKETS          = 'X'
IMPORTING
    NEWHEADER              = NEWHEADER
WITH_TAB_E             =
FORMATWIDTH_E          =
TABLES
    FOREIGN                = RTFLINE
    ITF_LINES              = ITFLINE.
LINKS_TO_CONVERT       =
if sy-subrc <> 0.
endif.
CALL FUNCTION 'PRINT_TEXT_ITF'
EXPORTING
     HEADER        = newheader
     OPTIONS       = options
IMPORTING
RESULT        =
TABLES
    LINES         = itfline.
if sy-subrc <> 0.
endif.
Any hints or suggestions to solve this problem will be highly appreciated.
Thanks,
Avra

Hi Vishwas,
Check out the thread [Efficient way of saving documents uploaded|Re: Efficient way of saving documents uploaded by users; and check the blog by Raja Thangamani.
Also check the thread [Export Images through Function Modules   |Export Images through Function Modules;.
Hope it helps you.

Data Recover From Formatted Drive? What is the best program to use to get back Logic Projects and any other file type?

I was in the process of reorganising my hard drives so I could RAID them however I managed to corrupt one drive and had to format it which meant I lost all my Logic Files and some other files. I managed to save a lot of files (mainly video files) before I had to format the drive but I need a Data Recovery service that will not alter anything on the hard drive and will put all the formatted files (regardless of the type) back for me so I can get the rest of the ones I need.
Thanks in advance.

What about folders and such?
No. FS doesn't reconstruct folders. However, Data Rescue does, depending on how you use it. About the only thing in Data Rescue a Quick Scan ever seems to show you are files that are already live.
So that leaves you with a Deep Scan, or a Deleted Files scan. The first pass of a Deep Scan will attempt to retrieve folders and files, along with their original names. The second pass only looks for file patterns. Like recognizing a Photoshop .psd file. It will recover it, but give it a nonsense name. A Deleted Files scan only results in nonsense names of recognized file types; no folders.
What were you using File Salvage on? A hard drive?
Yes, though you can use it on a flash drive, or any other mounted drive.
At the moment it is estimating 289 hours remaining on a 1TB drive. Can it not go faster?
No, both of the software mentioned are slower than molasses in January. When you delete anything in Windows, its file table entry simply tagged as deleted. So to unerase them, the tag is removed. That's why it works to quickly and easily (assuming you haven't already overwritten the data to be recovered).
In OS X though, the whole idea of the underlying UNIX structure is all about security. It's not supposed to be easy to retrieve deleted items. When you delete items, their file table entries are erased. So the only way to find deleted items is to scour the entire drive for BOF (Beginning Of File) markers that don't have a matching starting block to anything that is in the file table.
Another question, half the drive was empty. Will it fly over that empty space or will it sieve through it incase there was some files stored on it?
If you use the Expert mode is FS, you can choose to do that:

Code::Blocks and gdb's Debug Attach to process; crash

Hello!
I've just started using Code::Blocks and very happy with it, but there is one problem: say I have a binary file with debugging symbols, then I try to attach to it using Code::Blocks (Debug>Attach to process); when I enter the PID and press "OK" button - IDE crashes.
Here is the stacktrace of codeblocks itself from gdb:
[user@host ~]$ gdb codeblocks
GNU gdb (GDB) 7.4
Copyright (C) 2012 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "i686-pc-linux-gnu".
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>...
Reading symbols from /usr/bin/codeblocks...(no debugging symbols found)...done.
(gdb) run
Starting program: /usr/bin/codeblocks
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/libthread_db.so.1".
[New Thread 0xb1881b40 (LWP 8035)]
Initialize EditColourSet .....
[New Thread 0xae6c4b40 (LWP 8036)]
[New Thread 0xadec3b40 (LWP 8037)]
[New Thread 0xad6c2b40 (LWP 8038)]
[New Thread 0xacec1b40 (LWP 8039)]
Initialize EditColourSet: done.
Loading toolbar...
OpenFilesList: loaded
ThreadSearch: loaded
lib_finder: loaded
EnvVars: loaded
CodeStat: loaded
ClassWizard: loaded
HeaderFixup: loaded
BYOGames: loaded
CodeSnippets: loaded
cbDragScroll: loaded
SymTab: loaded
CB_Koders: loaded
HelpPlugin: loaded
Compiler: loaded
Debugger: loaded
wxSmithAui: loaded
Autosave: loaded
wxSmith: loaded
wxSmithMime: loaded
Profiler: loaded
ScriptedWizard: loaded
Valgrind: loaded
RegExTestbed: loaded
wxSmithContribItems: loaded
CppCheck: loaded
ToDoList: loaded
[New Thread 0xab9b8b40 (LWP 8040)]
CodeCompletion: loaded
FilesExtensionHandler: loaded
Cccc: loaded
Exporter: loaded
AStylePlugin: loaded
AutoVersioning: loaded
IncrementalSearch: loaded
ProjectsImporter: loaded
cbKeyBinder: loaded
MouseSap: loaded
BrowseTracker: loaded
HexEditor: loaded
copystrings: loaded
Open files list plugin activated
ThreadSearch plugin activated
Library finder plugin activated
Environment variables plugin activated
Code statistics plugin activated
Class wizard plugin activated
Header Fixup plugin activated
BYO Games plugin activated
Code snippets plugin activated
DragScroll plugin activated
Symbol Table Plugin plugin activated
Koders query plugin activated
Help plugin plugin activated
Added compiler "GNU GCC Compiler"
Added compiler "Intel C/C++ Compiler"
Added compiler "SDCC Compiler"
Added compiler "Tiny C Compiler"
Added compiler "GDC D Compiler"
Added compiler "Digital Mars D Compiler"
Added compiler "GNU ARM GCC Compiler"
Added compiler "GNU AVR GCC Compiler"
Added compiler "GNU GCC Compiler for PowerPC"
Added compiler "GNU GCC Compiler for TriCore"
Compiler plugin activated
Debugger plugin activated
wxSmith - Aui plugin activated
Autosave plugin activated
wxSmith plugin activated
wxSmith - MIME plugin plugin activated
Code profiler plugin activated
Project wizard added for 'Empty project'
Project wizard added for 'Console application'
Project wizard added for 'D application'
Project wizard added for 'FLTK project'
Project wizard added for 'GLFW project'
Project wizard added for 'GLUT project'
Project wizard added for 'GTK+ project'
Project wizard added for 'Irrlicht project'
Project wizard added for 'Lightfeather project'
Project wizard added for 'OpenGL project'
Project wizard added for 'Ogre project'
Project wizard added for 'Code::Blocks plugin'
Project wizard added for 'QT4 project'
Project wizard added for 'SDL project'
Project wizard added for 'SFML project'
Project wizard added for 'Static library'
Project wizard added for 'Shared library'
Project wizard added for 'wxWidgets project'
Build-target wizard added for 'Console'
Build-target wizard added for 'Static library'
Build-target wizard added for 'wxWidgets'
Project wizard added for 'ARM Project'
Project wizard added for 'AVR Project'
Project wizard added for 'TriCore Project'
Project wizard added for 'PowerPC Project'
File(s) wizard added for 'Empty file'
File(s) wizard added for 'C/C++ source'
File(s) wizard added for 'C/C++ header'
Scripted wizard plugin activated
Valgrind plugin activated
Regular expressions testbed plugin activated
wxSmith - Contrib Items plugin activated
CppCheck plugin activated
Todo List plugin activated
Code completion plugin activated
Files extension handler plugin activated
Cccc plugin activated
Source Exporter plugin activated
Source code formatter (AStyle) plugin activated
AutoVersioning plugin activated
IncrementalSearch plugin activated
Foreign projects importer plugin activated
Keyboard shortcuts plugin activated
MouseSap plugin activated
BrowseTracker plugin activated
HexEditor plugin activated
Copy Strings to clipboard plugin activated
Initializing plugins...
[New Thread 0xaaddcb40 (LWP 8047)]
Program received signal SIGSEGV, Segmentation fault.
0xb75237aa in wxStringBase::operator=(wxStringBase const&) () from /usr/lib/libwx_baseu-2.8.so.0
(gdb) backtrace
#0 0xb75237aa in wxStringBase::operator=(wxStringBase const&) () from /usr/lib/libwx_baseu-2.8.so.0
#1 0xabee2133 in DebuggerGDB::Debug() () from /usr/lib/codeblocks/plugins/libdebugger.so
#2 0xabed197b in DebuggerGDB::OnAttachToProcess(wxCommandEvent&) () from /usr/lib/codeblocks/plugins/libdebugger.so
#3 0xb74ce9f8 in wxAppConsole::HandleEvent(wxEvtHandler*, void (wxEvtHandler::*)(wxEvent&), wxEvent&) const () from /usr/lib/libwx_baseu-2.8.so.0
#4 0xb755e59a in wxEvtHandler::ProcessEventIfMatches(wxEventTableEntryBase const&, wxEvtHandler*, wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#5 0xb755e71b in wxEventHashTable::HandleEvent(wxEvent&, wxEvtHandler*) () from /usr/lib/libwx_baseu-2.8.so.0
#6 0xb755ead1 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#7 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#8 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#9 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#10 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#11 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#12 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#13 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#14 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#15 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#16 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#17 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#18 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#19 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#20 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#21 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#22 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#23 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#24 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#25 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#26 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#27 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#28 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#29 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#30 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#31 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#32 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#33 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#34 0xb755ea61 in wxEvtHandler::ProcessEvent(wxEvent&) () from /usr/lib/libwx_baseu-2.8.so.0
#35 0xb778cfb7 in ?? () from /usr/lib/libwx_gtk2u_core-2.8.so.0
#36 0xb6a2016c in g_cclosure_marshal_VOID__VOID () from /usr/lib/libgobject-2.0.so.0
#37 0xb6a1ec5c in g_closure_invoke () from /usr/lib/libgobject-2.0.so.0
#38 0xb6a31a10 in ?? () from /usr/lib/libgobject-2.0.so.0
#39 0xb6a3a7a7 in g_signal_emit_valist () from /usr/lib/libgobject-2.0.so.0
#40 0xb6a3a913 in g_signal_emit () from /usr/lib/libgobject-2.0.so.0
#41 0xb6d7d6c5 in gtk_widget_activate () from /usr/lib/libgtk-x11-2.0.so.0
#42 0xb6c5b3c7 in gtk_menu_shell_activate_item () from /usr/lib/libgtk-x11-2.0.so.0
#43 0xb6c5b7d1 in ?? () from /usr/lib/libgtk-x11-2.0.so.0
#44 0xb6c4fb2d in ?? () from /usr/lib/libgtk-x11-2.0.so.0
#45 0xb6c46762 in ?? () from /usr/lib/libgtk-x11-2.0.so.0
#46 0xb6a1d6ad in ?? () from /usr/lib/libgobject-2.0.so.0
#47 0xb6a1ec5c in g_closure_invoke () from /usr/lib/libgobject-2.0.so.0
#48 0xb6a31858 in ?? () from /usr/lib/libgobject-2.0.so.0
#49 0xb6a3a5b9 in g_signal_emit_valist () from /usr/lib/libgobject-2.0.so.0
#50 0xb6a3a913 in g_signal_emit () from /usr/lib/libgobject-2.0.so.0
#51 0xb6d7e743 in ?? () from /usr/lib/libgtk-x11-2.0.so.0
#52 0xb6c4492e in gtk_propagate_event () from /usr/lib/libgtk-x11-2.0.so.0
#53 0xb6c44cc0 in gtk_main_do_event () from /usr/lib/libgtk-x11-2.0.so.0
#54 0xb6ab9078 in ?? () from /usr/lib/libgdk-x11-2.0.so.0
#55 0xb693907f in g_main_context_dispatch () from /usr/lib/libglib-2.0.so.0
#56 0xb69397b0 in ?? () from /usr/lib/libglib-2.0.so.0
#57 0xb6939dbb in g_main_loop_run () from /usr/lib/libglib-2.0.so.0
#58 0xb6c43a5f in gtk_main () from /usr/lib/libgtk-x11-2.0.so.0
#59 0xb772ad8a in wxEventLoop::Run() () from /usr/lib/libwx_gtk2u_core-2.8.so.0
#60 0xb77a6c1f in wxAppBase::MainLoop() () from /usr/lib/libwx_gtk2u_core-2.8.so.0
#61 0xb77a64af in wxAppBase::OnRun() () from /usr/lib/libwx_gtk2u_core-2.8.so.0
#62 0x08074566 in ?? ()
#63 0xb7504ac6 in wxEntry(int&, wchar_t**) () from /usr/lib/libwx_baseu-2.8.so.0
#64 0xb7504b66 in wxEntry(int&, char**) () from /usr/lib/libwx_baseu-2.8.so.0
#65 0x0806c597 in ?? ()
#66 0xb71db3d5 in __libc_start_main () from /lib/libc.so.6
#67 0x08073d3d in ?? ()
(gdb)
Here is the XML file (debug report) that CodeBlocks gave to me after crash:
<?xml version="1.0" encoding="utf-8"?>
<report version="1.0" kind="exception">
<system description="Linux 3.3.2-1-ARCH i686"/>
<modules>
<module path="/usr/bin/codeblocks" address="08048000" size="0008f000"/>
<module path="/usr/bin/codeblocks" address="080dc000" size="00003000"/>
<module path="[heap]" address="087ef000" size="0138e000"/>
<module path="/usr/share/fonts/TTF/DejaVuSansMono-Bold.ttf" address="aa53f000" size="0004d000"/>
<module path="/usr/lib/codeblocks/plugins/libHexEditor.so" address="aa5f7000" size="00001000"/>
<module path="/usr/lib/codeblocks/plugins/libHexEditor.so" address="aa5fb000" size="00001000"/>
<module path="/usr/lib/codeblocks/plugins/libBrowseTracker.so" address="aa631000" size="00002000"/>
<module path="/usr/lib/codeblocks/plugins/libMouseSap.so" address="aa634000" size="0000a000"/>
<module path="/usr/lib/codeblocks/plugins/libMouseSap.so" address="aa63f000" size="00001000"/>
<module path="/usr/lib/codeblocks/plugins/libkeybinder.so" address="aa676000" size="00002000"/>
<module path="/usr/lib/codeblocks/plugins/libprojectsimporter.so" address="aa679000" size="0002a000"/>
<module path="/usr/lib/codeblocks/plugins/libprojectsimporter.so" address="aa6a4000" size="00001000"/>
<module path="/usr/lib/codeblocks/plugins/libAutoVersioning.so" address="aa6de000" size="00002000"/>
<module path="/usr/lib/codeblocks/plugins/libastyle.so" address="aa6e1000" size="0003c000"/>
<module path="/usr/lib/codeblocks/plugins/libastyle.so" address="aa71e000" size="00001000"/>
<module path="/usr/lib/codeblocks/plugins/libexporter.so" address="aa7df000" size="00003000"/>
<module path="/usr/lib/codeblocks/plugins/libdefaultmimehandler.so" address="aa7e8000" size="00015000"/>
<module path="/usr/lib/codeblocks/plugins/libdefaultmimehandler.so" address="aa7ff000" size="00001000"/>
<module path="/usr/lib/codeblocks/plugins/libIncrementalSearch.so" address="aa902000" size="00013000"/>
<module path="/usr/lib/codeblocks/plugins/libIncrementalSearch.so" address="aa916000" size="00001000"/>
<module path="/usr/lib/codeblocks/plugins/libcodecompletion.so" address="ab118000" size="000a7000"/>
<module path="/usr/lib/codeblocks/plugins/libcodecompletion.so" address="ab1c2000" size="00001000"/>
<module path="/usr/lib/codeblocks/plugins/libtodo.so" address="ab1c4000" size="00023000"/>
<module path="/usr/lib/codeblocks/plugins/libtodo.so" address="ab1e8000" size="00002000"/>
<module path="/usr/lib/codeblocks/plugins/libCppCheck.so" address="ab1eb000" size="0000c000"/>
<module path="/usr/lib/codeblocks/plugins/libCppCheck.so" address="ab1f8000" size="00001000"/>
<module path="/usr/lib/wxSmithContribItems/libwxchartctrl.so.0.0.1" address="ab220000" size="00001000" version="0.0.1"/>
<module path="/usr/lib/wxSmithContribItems/libwxchartctrl.so.0.0.1" address="ab223000" size="00001000" version="0.0.1"/>
<module path="/usr/lib/codeblocks/plugins/libwxsmithcontribitems.so" address="ab24b000" size="00001000"/>
<module path="/usr/lib/codeblocks/plugins/libRegExTestbed.so" address="ab24e000" size="0000d000"/>
<module path="/usr/lib/codeblocks/plugins/libRegExTestbed.so" address="ab25c000" size="00001000"/>
<module path="/usr/lib/codeblocks/plugins/libscriptedwizard.so" address="ab2a9000" size="00004000"/>
<module path="/usr/lib/codeblocks/plugins/libProfiler.so" address="ab2ae000" size="0001a000"/>
<module path="/usr/lib/codeblocks/plugins/libProfiler.so" address="ab2c9000" size="00001000"/>
<module path="/usr/lib/libwxsmithlib.so.0.0.1" address="ab554000" size="00015000" version="0.0.1"/>
<module path="/usr/lib/codeblocks/plugins/libValgrind.so" address="ab581000" size="0000d000"/>
<module path="/usr/lib/codeblocks/plugins/libValgrind.so" address="ab58f000" size="00001000"/>
<module path="/usr/lib/codeblocks/plugins/libautosave.so" address="ab59d000" size="00001000"/>
<module path="/usr/lib/codeblocks/plugins/libwxSmithAui.so" address="ab59f000" size="00049000"/>
<module path="/usr/lib/codeblocks/plugins/libwxSmithAui.so" address="ab5e9000" size="00003000"/>
<module path="/usr/lib/codeblocks/plugins/libdebugger.so" address="ab5ef000" size="00097000"/>
<module path="/usr/lib/codeblocks/plugins/libdebugger.so" address="ab68c000" size="00001000"/>
<module path="/usr/lib/codeblocks/plugins/libcompiler.so" address="ab68e000" size="0011c000"/>
<module path="/usr/lib/codeblocks/plugins/libcompiler.so" address="ab7ad000" size="00001000"/>
<module path="/usr/lib/codeblocks/plugins/libhelp_plugin.so" address="ab7b0000" size="0010d000"/>
<module path="/usr/lib/codeblocks/plugins/libhelp_plugin.so" address="ab8be000" size="00004000"/>
<module path="/usr/lib/codeblocks/plugins/libcb_koders.so" address="ab8c8000" size="00012000"/>
<module path="/usr/lib/codeblocks/plugins/libcb_koders.so" address="ab8db000" size="00001000"/>
<module path="/usr/lib/codeblocks/plugins/libSymTab.so" address="ab8f6000" size="00001000"/>
<module path="/usr/lib/codeblocks/plugins/libdragscroll.so" address="ab8f8000" size="0001c000"/>
<module path="/usr/lib/codeblocks/plugins/libdragscroll.so" address="ab916000" size="00001000"/>
<module path="/usr/lib/codeblocks/plugins/libcodesnippets.so" address="aba1a000" size="00007000"/>
<module path="/usr/lib/codeblocks/plugins/libbyogames.so" address="aba25000" size="00027000"/>
<module path="/usr/lib/codeblocks/plugins/libbyogames.so" address="aba4f000" size="00001000"/>
<module path="/usr/lib/codeblocks/plugins/libheaderfixup.so" address="abb0b000" size="00002000"/>
<module path="/usr/lib/codeblocks/plugins/libclasswizard.so" address="abb0e000" size="00018000"/>
<module path="/usr/lib/codeblocks/plugins/libclasswizard.so" address="abb27000" size="00001000"/>
<module path="/usr/lib/codeblocks/plugins/libcodestat.so" address="abb3c000" size="00001000"/>
<module path="/usr/lib/wxSmithContribItems/libwxflatnotebook.so.0.0.1" address="abb3e000" size="0003e000" version="0.0.1"/>
<module path="/usr/lib/wxSmithContribItems/libwxflatnotebook.so.0.0.1" address="abb7e000" size="00002000" version="0.0.1"/>
<module path="/usr/lib/codeblocks/plugins/liblib_finder.so" address="abbf0000" size="00003000"/>
<module path="/usr/lib/codeblocks/plugins/libThreadSearch.so" address="abbf4000" size="0004a000"/>
<module path="/usr/lib/codeblocks/plugins/libThreadSearch.so" address="abc41000" size="00001000"/>
<module path="/usr/lib/codeblocks/plugins/libopenfileslist.so" address="abc43000" size="00009000"/>
<module path="/usr/lib/codeblocks/plugins/libopenfileslist.so" address="abc4d000" size="00001000"/>
<module path="/usr/share/fonts/TTF/DejaVuSansMono.ttf" address="abcae000" size="00052000"/>
<module path="/usr/lib/codeblocks/plugins/libcopystrings.so" address="abe00000" size="00007000"/>
<module path="/usr/lib/codeblocks/plugins/libcopystrings.so" address="abe08000" size="00001000"/>
<module path="/usr/lib/codeblocks/plugins/libenvvars.so" address="abe23000" size="00001000"/>
<module path="/usr/lib/wxSmithContribItems/libwxcustombutton.so.0.0.1" address="abe25000" size="0000a000" version="0.0.1"/>
<module path="/usr/lib/wxSmithContribItems/libwxcustombutton.so.0.0.1" address="abe30000" size="00001000" version="0.0.1"/>
<module path="/usr/share/mime/mime.cache" address="ade35000" size="0001f000"/>
<module path="/usr/lib/libgvfscommon.so.0.0.0" address="ade6a000" size="00001000" version="0.0.0"/>
<module path="/usr/lib/codeblocks/plugins/libCccc.so" address="ade6c000" size="00007000"/>
<module path="/usr/lib/codeblocks/plugins/libCccc.so" address="ade74000" size="00001000"/>
<module path="/usr/share/mime/mime.cache" address="ade76000" size="0001f000"/>
<module path="/usr/lib/gio/modules/libgvfsdbus.so" address="adebf000" size="00001000"/>
<module path="/usr/local/share/icons/hicolor/icon-theme.cache" address="adec1000" size="00091000"/>
<module path="/usr/share/icons/hicolor/icon-theme.cache" address="af2a9000" size="01357000"/>
<module path="/usr/lib/codeblocks/plugins/libwxsmith.so" address="b0701000" size="00002000"/>
<module path="/usr/lib/codeblocks/plugins/libwxsmith.so" address="b0704000" size="00001000"/>
<module path="/usr/share/fonts/TTF/DejaVuSans.ttf" address="b0721000" size="000b0000"/>
<module path="/usr/share/locale/ru/LC_MESSAGES/gdk-pixbuf.mo" address="b07d4000" size="00008000"/>
<module path="/dev/shm/pulse-shm-3776743730" address="b0fdd000" size="04001000"/>
<module path="/lib/libnsl-2.15.so" address="b4ff3000" size="00001000" version="2.15"/>
<module path="/usr/lib/libvorbisenc.so.2.0.9" address="b4ff7000" size="00166000" version="2.0.9"/>
<module path="/usr/lib/libvorbisenc.so.2.0.9" address="b516e000" size="00001000" version="2.0.9"/>
<module path="/usr/lib/libFLAC.so.8.2.0" address="b51be000" size="00001000" version="8.2.0"/>
<module path="/usr/lib/libasyncns.so.0.3.1" address="b51c4000" size="00001000" version="0.3.1"/>
<module path="/usr/lib/libsndfile.so.1.0.25" address="b51c6000" size="0006c000" version="1.0.25"/>
<module path="/usr/lib/libsndfile.so.1.0.25" address="b5233000" size="00001000" version="1.0.25"/>
<module path="/usr/lib/libdbus-1.so.3.5.9" address="b5238000" size="00048000" version="3.5.9"/>
<module path="/usr/lib/libdbus-1.so.3.5.9" address="b5281000" size="00001000" version="3.5.9"/>
<module path="/usr/lib/libpulsecommon-1.1.so" address="b52e7000" size="00001000" version="1.1"/>
<module path="/usr/lib/libpulse.so.0.13.5" address="b52e9000" size="0004c000" version="0.13.5"/>
<module path="/usr/lib/libpulse.so.0.13.5" address="b5336000" size="00001000" version="0.13.5"/>
<module path="/usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-xpm.so" address="b533f000" size="00001000" version="xpm"/>
<module path="/usr/lib/libudev.so.0.13.1" address="b5341000" size="0000e000" version="0.13.1"/>
<module path="/usr/lib/libudev.so.0.13.1" address="b5350000" size="00001000" version="0.13.1"/>
<module path="/usr/lib/libcanberra-0.28/libcanberra-pulse.so" address="b5360000" size="00006000" version="pulse"/>
<module path="/usr/lib/libcanberra-0.28/libcanberra-pulse.so" address="b5367000" size="00001000" version="pulse"/>
<module path="/var/cache/fontconfig/f6b893a7224233d96cb72fd88691c0b4-le32d4.cache-3" address="b540d000" size="0002a000"/>
<module path="/var/cache/fontconfig/df311e82a1a24c41a75c2c930223552e-le32d4.cache-3" address="b5478000" size="00041000"/>
<module path="/usr/lib/gtk-2.0/2.10.0/engines/libclearlooks.so" address="b5519000" size="0002f000" version="2.0/2.10.0/engines/libclearlooks"/>
<module path="/usr/lib/gtk-2.0/2.10.0/engines/libclearlooks.so" address="b5549000" size="00001000" version="2.0/2.10.0/engines/libclearlooks"/>
<module path="/usr/lib/libltdl.so.7.3.0" address="b5553000" size="00001000" version="7.3.0"/>
<module path="/usr/lib/libtdb.so.1.2.9" address="b5555000" size="00011000" version="1.2.9"/>
<module path="/usr/lib/libtdb.so.1.2.9" address="b5567000" size="00001000" version="1.2.9"/>
<module path="/usr/lib/libogg.so.0.8.0" address="b556e000" size="00001000" version="0.8.0"/>
<module path="/usr/lib/libvorbis.so.0.4.6" address="b5599000" size="00001000" version="0.4.6"/>
<module path="/usr/lib/libvorbisfile.so.3.3.5" address="b559b000" size="00008000" version="3.3.5"/>
<module path="/usr/lib/libvorbisfile.so.3.3.5" address="b55a4000" size="00001000" version="3.3.5"/>
<module path="/usr/lib/libcanberra.so.0.2.5" address="b55b5000" size="00001000" version="0.2.5"/>
<module path="/usr/lib/libcanberra-gtk.so.0.1.8" address="b55b7000" size="00004000" version="0.1.8"/>
<module path="/usr/lib/libcanberra-gtk.so.0.1.8" address="b55bc000" size="00001000" version="0.1.8"/>
<module path="/lib/libnss_files-2.15.so" address="b55f3000" size="0000b000" version="2.15"/>
<module path="/lib/libnss_files-2.15.so" address="b55ff000" size="00001000" version="2.15"/>
<module path="/usr/lib/libjson.so.0.0.1" address="b5603000" size="00007000" version="0.0.1"/>
<module path="/usr/lib/libjson.so.0.0.1" address="b560b000" size="00001000" version="0.0.1"/>
<module path="/var/cache/fontconfig/a98d8961fa319a64d3cfd8640c79e62d-le32d4.cache-3" address="b561c000" size="00007000"/>
<module path="/usr/share/locale/ru/LC_MESSAGES/libc.mo" address="b5629000" size="0002e000"/>
<module path="/usr/lib/locale/locale-archive" address="b5788000" size="00200000"/>
<module path="/lib/libbz2.so.1.0.6" address="b598e000" size="0000f000" version="1.0.6"/>
<module path="/lib/libresolv-2.15.so" address="b599e000" size="00013000" version="2.15"/>
<module path="/lib/libresolv-2.15.so" address="b59b2000" size="00001000" version="2.15"/>
<module path="/usr/lib/libpixman-1.so.0.24.4" address="b59b5000" size="00093000" version="0.24.4"/>
<module path="/usr/lib/libpixman-1.so.0.24.4" address="b5a4c000" size="00001000" version="0.24.4"/>
<module path="/usr/lib/libfreetype.so.6.8.1" address="b5ae4000" size="00004000" version="6.8.1"/>
<module path="/usr/lib/libXdmcp.so.6.0.0" address="b5ae9000" size="00005000" version="6.0.0"/>
<module path="/usr/lib/libXdmcp.so.6.0.0" address="b5aef000" size="00001000" version="6.0.0"/>
<module path="/usr/lib/libXau.so.6.0.0" address="b5af1000" size="00002000" version="6.0.0"/>
<module path="/usr/lib/libXau.so.6.0.0" address="b5af4000" size="00001000" version="6.0.0"/>
<module path="/usr/lib/liblzma.so.5.0.3" address="b5b1a000" size="00001000" version="5.0.3"/>
<module path="/usr/lib/libuuid.so.1.3.0" address="b5b1c000" size="00004000" version="1.3.0"/>
<module path="/usr/lib/libuuid.so.1.3.0" address="b5b21000" size="00001000" version="1.3.0"/>
<module path="/usr/lib/libICE.so.6.3.0" address="b5b38000" size="00001000" version="6.3.0"/>
<module path="/usr/lib/libffi.so.5.0.10" address="b5b3c000" size="00005000" version="5.0.10"/>
<module path="/usr/lib/libffi.so.5.0.10" address="b5b42000" size="00001000" version="5.0.10"/>
<module path="/lib/librt-2.15.so" address="b5b44000" size="00007000" version="2.15"/>
<module path="/lib/librt-2.15.so" address="b5b4c000" size="00001000" version="2.15"/>
<module path="/usr/lib/libpcre.so.1.0.0" address="b5ba7000" size="00001000" version="1.0.0"/>
<module path="/usr/lib/libpcre.so.1.0.0" address="b5ba9000" size="00001000" version="1.0.0"/>
<module path="/usr/lib/libXdamage.so.1.1.0" address="b5bac000" size="00001000" version="1.1.0"/>
<module path="/usr/lib/libXcomposite.so.1.0.0" address="b5bae000" size="00002000" version="1.0.0"/>
<module path="/usr/lib/libXcomposite.so.1.0.0" address="b5bb1000" size="00001000" version="1.0.0"/>
<module path="/usr/lib/libXcursor.so.1.0.2" address="b5bbb000" size="00001000" version="1.0.2"/>
<module path="/usr/lib/libXrandr.so.2.2.0" address="b5bbe000" size="00007000" version="2.2.0"/>
<module path="/usr/lib/libXrandr.so.2.2.0" address="b5bc6000" size="00001000" version="2.2.0"/>
<module path="/usr/lib/libXi.so.6.1.0" address="b5bd5000" size="00001000" version="6.1.0"/>
<module path="/usr/lib/libXrender.so.1.3.0" address="b5bd7000" size="00009000" version="1.3.0"/>
<module path="/usr/lib/libXrender.so.1.3.0" address="b5be1000" size="00001000" version="1.3.0"/>
<module path="/usr/lib/libXext.so.6.4.0" address="b5bf3000" size="00001000" version="6.4.0"/>
<module path="/usr/lib/libgmodule-2.0.so.0.3000.2" address="b5bf5000" size="00003000" version="0.3000.2"/>
<module path="/usr/lib/libgmodule-2.0.so.0.3000.2" address="b5bf9000" size="00001000" version="0.3000.2"/>
<module path="/usr/lib/libfontconfig.so.1.4.4" address="b5bfb000" size="00033000" version="1.4.4"/>
<module path="/usr/lib/libfontconfig.so.1.4.4" address="b5c2f000" size="00001000" version="1.4.4"/>
<module path="/usr/lib/libpangoft2-1.0.so.0.2904.0" address="b5c5c000" size="00001000" version="0.2904.0"/>
<module path="/usr/lib/libgio-2.0.so.0.3000.2" address="b5c5e000" size="00140000" version="0.3000.2"/>
<module path="/usr/lib/libgio-2.0.so.0.3000.2" address="b5da0000" size="00001000" version="0.3000.2"/>
<module path="/usr/lib/libcairo.so.2.11000.2" address="b5da2000" size="000b4000" version="2.11000.2"/>
<module path="/usr/lib/libcairo.so.2.11000.2" address="b5e57000" size="00001000" version="2.11000.2"/>
<module path="/usr/lib/libatk-1.0.so.0.20209.1" address="b5e5a000" size="0001e000" version="0.20209.1"/>
<module path="/usr/lib/libatk-1.0.so.0.20209.1" address="b5e7a000" size="00001000" version="0.20209.1"/>
<module path="/usr/lib/libXfixes.so.3.1.0" address="b5e7c000" size="00004000" version="3.1.0"/>
<module path="/usr/lib/libXfixes.so.3.1.0" address="b5e81000" size="00001000" version="3.1.0"/>
<module path="/usr/lib/libpangocairo-1.0.so.0.2904.0" address="b5e8d000" size="00001000" version="0.2904.0"/>
<module path="/usr/lib/libxcb.so.1.1.0" address="b5e8f000" size="00020000" version="1.1.0"/>
<module path="/usr/lib/libxcb.so.1.1.0" address="b5eb0000" size="00001000" version="1.1.0"/>
<module path="/usr/lib/libexpat.so.1.6.0" address="b5ed7000" size="00001000" version="1.6.0"/>
<module path="/usr/lib/libexpat.so.1.6.0" address="b5eda000" size="00001000" version="1.6.0"/>
<module path="/usr/lib/libz.so.1.2.6" address="b5ef0000" size="00001000" version="1.2.6"/>
<module path="/usr/lib/libtiff.so.5.0.6" address="b5ef3000" size="0006f000" version="5.0.6"/>
<module path="/usr/lib/libtiff.so.5.0.6" address="b5f63000" size="00002000" version="5.0.6"/>
<module path="/usr/lib/libjpeg.so.8.0.2" address="b5f66000" size="00045000" version="8.0.2"/>
<module path="/usr/lib/libjpeg.so.8.0.2" address="b5fac000" size="00001000" version="8.0.2"/>
<module path="/usr/lib/libpng15.so.15.10.0" address="b5fbd000" size="0002e000" version="15.10.0"/>
<module path="/usr/lib/libpng15.so.15.10.0" address="b5fec000" size="00001000" version="15.10.0"/>
<module path="/usr/lib/libSM.so.6.0.1" address="b5ff4000" size="00001000" version="6.0.1"/>
<module path="/usr/lib/libXxf86vm.so.1.0.0" address="b5ff6000" size="00004000" version="1.0.0"/>
<module path="/usr/lib/libXxf86vm.so.1.0.0" address="b5ffb000" size="00001000" version="1.0.0"/>
<module path="/usr/lib/libXinerama.so.1.0.0" address="b5ffe000" size="00001000" version="1.0.0"/>
<module path="/usr/lib/libgthread-2.0.so.0.3000.2" address="b6001000" size="00004000" version="0.3000.2"/>
<module path="/usr/lib/libgthread-2.0.so.0.3000.2" address="b6006000" size="00001000" version="0.3000.2"/>
<module path="/usr/lib/libpango-1.0.so.0.2904.0" address="b604f000" size="00001000" version="0.2904.0"/>
<module path="/usr/lib/libglib-2.0.so.0.3000.2" address="b6051000" size="000f6000" version="0.3000.2"/>
<module path="/usr/lib/libglib-2.0.so.0.3000.2" address="b6148000" size="00001000" version="0.3000.2"/>
<module path="/usr/lib/libgdk_pixbuf-2.0.so.0.2400.1" address="b616b000" size="00001000" version="0.2400.1"/>
<module path="/usr/lib/libgobject-2.0.so.0.3000.2" address="b616d000" size="0004c000" version="0.3000.2"/>
<module path="/usr/lib/libgobject-2.0.so.0.3000.2" address="b61ba000" size="00001000" version="0.3000.2"/>
<module path="/usr/lib/libgdk-x11-2.0.so.0.2400.10" address="b61bc000" size="000ab000" version="0.2400.10"/>
<module path="/usr/lib/libgdk-x11-2.0.so.0.2400.10" address="b6269000" size="00001000" version="0.2400.10"/>
<module path="/usr/lib/libgtk-x11-2.0.so.0.2400.10" address="b66be000" size="00001000" version="0.2400.10"/>
<module path="/usr/lib/libgtk-x11-2.0.so.0.2400.10" address="b66c3000" size="00002000" version="0.2400.10"/>
<module path="/lib/libm-2.15.so" address="b66c7000" size="0002a000" version="2.15"/>
<module path="/lib/libm-2.15.so" address="b66f2000" size="00001000" version="2.15"/>
<module path="/lib/libdl-2.15.so" address="b66f6000" size="00001000" version="2.15"/>
<module path="/usr/lib/libX11.so.6.3.0" address="b66f8000" size="00132000" version="6.3.0"/>
<module path="/usr/lib/libX11.so.6.3.0" address="b682b000" size="00001000" version="6.3.0"/>
<module path="/usr/lib/libwx_baseu_xml-2.8.so.0.8.0" address="b682f000" size="00008000" version="0.8.0"/>
<module path="/usr/lib/libwx_baseu_xml-2.8.so.0.8.0" address="b6838000" size="00001000" version="0.8.0"/>
<module path="/usr/lib/libwx_gtk2u_richtext-2.8.so.0.8.0" address="b683a000" size="000da000" version="0.8.0"/>
<module path="/usr/lib/libwx_gtk2u_richtext-2.8.so.0.8.0" address="b691a000" size="00001000" version="0.8.0"/>
<module path="/lib/libc-2.15.so" address="b691d000" size="0019b000" version="2.15"/>
<module path="/lib/libc-2.15.so" address="b6ab9000" size="00002000" version="2.15"/>
<module path="/usr/lib/libgcc_s.so.1" address="b6abf000" size="0001c000" version="1"/>
<module path="/usr/lib/libstdc++.so.6.0.17" address="b6adc000" size="000dc000" version="6.0.17"/>
<module path="/usr/lib/libstdc++.so.6.0.17" address="b6bbc000" size="00001000" version="6.0.17"/>
<module path="/lib/libpthread-2.15.so" address="b6bc4000" size="00017000" version="2.15"/>
<module path="/lib/libpthread-2.15.so" address="b6bdc000" size="00001000" version="2.15"/>
<module path="/usr/lib/libwx_baseu-2.8.so.0.8.0" address="b6be0000" size="00136000" version="0.8.0"/>
<module path="/usr/lib/libwx_baseu-2.8.so.0.8.0" address="b6d17000" size="00004000" version="0.8.0"/>
<module path="/usr/lib/libwx_baseu_net-2.8.so.0.8.0" address="b6d26000" size="00029000" version="0.8.0"/>
<module path="/usr/lib/libwx_baseu_net-2.8.so.0.8.0" address="b6d50000" size="00001000" version="0.8.0"/>
<module path="/usr/lib/libwx_gtk2u_core-2.8.so.0.8.0" address="b6d52000" size="002f7000" version="0.8.0"/>
<module path="/usr/lib/libwx_gtk2u_core-2.8.so.0.8.0" address="b704a000" size="00026000" version="0.8.0"/>
<module path="/usr/lib/libwx_gtk2u_adv-2.8.so.0.8.0" address="b707d000" size="000ab000" version="0.8.0"/>
<module path="/usr/lib/libwx_gtk2u_adv-2.8.so.0.8.0" address="b7130000" size="00001000" version="0.8.0"/>
<module path="/usr/lib/libwx_gtk2u_html-2.8.so.0.8.0" address="b7133000" size="00089000" version="0.8.0"/>
<module path="/usr/lib/libwx_gtk2u_html-2.8.so.0.8.0" address="b71c1000" size="00002000" version="0.8.0"/>
<module path="/usr/lib/libwx_gtk2u_qa-2.8.so.0.8.0" address="b71c4000" size="00019000" version="0.8.0"/>
<module path="/usr/lib/libwx_gtk2u_qa-2.8.so.0.8.0" address="b71de000" size="00001000" version="0.8.0"/>
<module path="/usr/lib/libwx_gtk2u_xrc-2.8.so.0.8.0" address="b71e0000" size="0007a000" version="0.8.0"/>
<module path="/usr/lib/libwx_gtk2u_xrc-2.8.so.0.8.0" address="b725d000" size="00001000" version="0.8.0"/>
<module path="/usr/lib/libwx_gtk2u_aui-2.8.so.0.8.0" address="b725f000" size="0005d000" version="0.8.0"/>
<module path="/usr/lib/libwx_gtk2u_aui-2.8.so.0.8.0" address="b72bf000" size="00001000" version="0.8.0"/>
<module path="/usr/lib/libcodeblocks.so.0.0.1" address="b72c1000" size="00431000" version="0.0.1"/>
<module path="/usr/lib/libcodeblocks.so.0.0.1" address="b7703000" size="00005000" version="0.0.1"/>
<module path="/usr/local/share/mime/mime.cache" address="b770e000" size="00001000"/>
<module path="/lib/libutil-2.15.so" address="b7711000" size="00001000" version="2.15"/>
<module path="/usr/lib/gtk-2.0/modules/libcanberra-gtk-module.so" address="b7713000" size="00005000" version="module"/>
<module path="/usr/lib/gtk-2.0/modules/libcanberra-gtk-module.so" address="b7719000" size="00001000" version="module"/>
<module path="/usr/lib/gconv/UTF-32.so" address="b7733000" size="00002000" version="32"/>
<module path="/usr/lib/gconv/UTF-32.so" address="b7736000" size="00001000" version="32"/>
<module path="[vdso]" address="b7738000" size="00001000"/>
<module path="/lib/ld-2.15.so" address="b7759000" size="00001000" version="2.15"/>
</modules>
<stack>
<frame level="0" function="wxFatalSignalHandler" offset="00000023"/>
<frame level="1"/>
<frame level="2" function="wxStringBase::operator=(wxStringBase const&)" offset="0000001a"/>
<frame level="3" function="DebuggerGDB::Debug()" offset="000001f3"/>
<frame level="4" function="DebuggerGDB::OnAttachToProcess(wxCommandEvent&)" offset="0000014b"/>
<frame level="5" function="wxAppConsole::HandleEvent(wxEvtHandler*, void (wxEvtHandler::*)(wxEvent&), wxEvent&) const" offset="00000028"/>
<frame level="6" function="wxEvtHandler::ProcessEventIfMatches(wxEventTableEntryBase const&, wxEvtHandler*, wxEvent&)" offset="0000007a"/>
<frame level="7" function="wxEventHashTable::HandleEvent(wxEvent&, wxEvtHandler*)" offset="000000ab"/>
<frame level="8" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="000000e1"/>
<frame level="9" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="10" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="11" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="12" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="13" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="14" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="15" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="16" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="17" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="18" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="19" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="20" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="21" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="22" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="23" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="24" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="25" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="26" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="27" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="28" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="29" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="30" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="31" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="32" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="33" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="34" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="35" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="36" function="wxEvtHandler::ProcessEvent(wxEvent&)" offset="00000071"/>
<frame level="37"/>
<frame level="38" function="g_cclosure_marshal_VOID__VOID" offset="0000008c"/>
<frame level="39" function="g_closure_invoke" offset="000001ac"/>
<frame level="40"/>
<frame level="41" function="g_signal_emit_valist" offset="00000777"/>
<frame level="42" function="g_signal_emit" offset="00000033"/>
<frame level="43" function="gtk_widget_activate" offset="00000095"/>
<frame level="44" function="gtk_menu_shell_activate_item" offset="00000117"/>
<frame level="45"/>
<frame level="46"/>
<frame level="47"/>
<frame level="48"/>
<frame level="49" function="g_closure_invoke" offset="000001ac"/>
<frame level="50"/>
<frame level="51" function="g_signal_emit_valist" offset="00000589"/>
<frame level="52" function="g_signal_emit" offset="00000033"/>
<frame level="53"/>
<frame level="54" function="gtk_propagate_event" offset="000000ce"/>
<frame level="55" function="gtk_main_do_event" offset="000002c0"/>
<frame level="56"/>
<frame level="57" function="g_main_context_dispatch" offset="000001df"/>
<frame level="58"/>
<frame level="59" function="g_main_loop_run" offset="0000014b"/>
<frame level="60" function="gtk_main" offset="000000af"/>
<frame level="61" function="wxEventLoop::Run()" offset="0000004a"/>
<frame level="62" function="wxAppBase::MainLoop()" offset="0000004f"/>
<frame level="63" function="wxAppBase::OnRun()" offset="0000001f"/>
<frame level="64"/>
</stack>
</report>
I've just wrote a simple helloworld in C, added getchar() to wait, compiled it with "-g" flag and tried to attach to it with this IDE. Tried on 2 machines, different binaries: same result - IDE crashes. Am I doing something wrong, or this is a problem with WxWidgets/Code::Blocks?
My packages are: wxgtk 2.8.12.1-3, codeblocks 10.05-2 and gdb 7.4-1.
Last edited by dontbugme (2012-04-24 02:19:16)

Are you running on an x86_64 architecture? If so I have a pacman Code::Blocks package which is the current SVN I could upload somewhere for you..
If not, check: Here to download and make the latest SVN version. There is a patch you have to apply on that page and also you need to make the build using the makepkg "-fpermissive" option.
Why do you want this SVN version (version 7932)? Well, it's current as of April 14 this month. The C::B 10.05 version is 2010, 5th month. So way out of date. There have been no official builds since then so you want to be using SVN until there is.
I don't know if using the SVN version would fix your issue but even if not: it has a host of other enhancements and fixes.

I receive the error: Unable to load block component C:\Program Files\Hyperception\VABINF\KeyRcv.dll

I have two Major issues with our Infinity Project computers,
We have one entire lab that is getting this error... "Unable to load
block component C:\Program Files\Hyperception\VABINF\KeyRcv.dll.
Please verify that the component exists and any dependencies it may
have are satisfied." It is also producing this error with
NumEntry.dll. Both files exist. I am not sure what
dependencies these files may have. Ideas?
We have several systems that are giving the following error on one of
our labs... "You have exceeded the number of block functions allowed by
VAB for Infinity; contact Hyperception regarding upgrades." From
what The professor here at UTA told me when I first took on this
project, this was a problem that we had on the previous boards and that
someone at Hyperception was able to help us resolve this problem.
Can you help out with these issues? The first one I need an answer today if possible.
Thanks,

We have seen this type of problem on some computers (we do not know why as of yet).The problem with missing blocks is very likely being caused by file permissions, and can be seen when non-administrators are using VAB software. To resolve this: 1. login as ADMINISTRATOR 2. run the command line script from a DOS prompt as shown below: cacls "C:\Program FIles\Hyperception\VABINF" /T /E /G Everyone:F It will scroll through the name of every file in the provided directory, and all subdirectories. This should reset every file, and allow the USER to access all files in VAB software. This should correct the problem. Regards,Steve

Open and Save Excel Files

Hi All,
I need code of How to open and save excel file in local system in Oracle forms.
With Regards,
Chandra Shekhar

Hello Chandra,
Webutil can be used to achieve this functionality.
STEPS TO FOLLOW
================
1. Install and configure Webutil following instructions in the webutil manual
and the readme file.
2. Create a form with a block Eg. DEPT
3. Create a button, and in that button put the following code -
DECLARE
application Client_OLE2.Obj_Type;
workbooks Client_OLE2.Obj_Type;
workbook Client_OLE2.Obj_Type;
worksheets Client_OLE2.Obj_Type;
worksheet Client_OLE2.Obj_Type;
args Client_OLE2.List_Type;
cell ole2.Obj_Type;
j INTEGER;
k INTEGER;
BEGIN
application := Client_OLE2.create_obj('Excel.Application');
workbooks := Client_OLE2.Get_Obj_Property(application, 'Workbooks');
workbook := Client_OLE2.Invoke_Obj(workbooks, 'Add');
worksheets := Client_OLE2.Get_Obj_Property(workbook, 'Worksheets');
worksheet := Client_OLE2.Invoke_Obj(worksheets, 'Add');
go_block('dept');
first_record;
j:=1;
k:=1;
while :system.last_record = 'FALSE'
loop
for k in 1..3 /* DEPT has 3 columns */
loop
If not name_in(:system.cursor_item) is NULL Then
args:=Client_OLE2.create_arglist;
Client_OLE2.add_arg(args, j);
Client_OLE2.add_arg(args, k);
cell:=Client_OLE2.get_obj_property(worksheet, 'Cells', args);
Client_OLE2.destroy_arglist(args);
Client_OLE2.set_property(cell, 'Value', name_in(:system.cursor_item));
Client_OLE2.release_obj(cell);
End If;
next_item;
end loop;
j:=j+1;
next_record;
end loop;
/* For the last record */
for k in 1..3
loop
If not name_in(:system.cursor_item) is NULL Then
args:=Client_OLE2.create_arglist;
Client_OLE2.add_arg(args, j);
Client_OLE2.add_arg(args, k);
cell:=Client_OLE2.get_obj_property(worksheet, 'Cells', args);
Client_OLE2.destroy_arglist(args);
Client_OLE2.set_property(cell, 'Value', name_in(:system.cursor_item));
Client_OLE2.release_obj(cell);
End If;
next_item;
end loop;
Client_OLE2.Release_Obj(worksheet);
Client_OLE2.Release_Obj(worksheets);
/* Save the Excel file created */
args := Client_OLE2.Create_Arglist;
Client_OLE2.Add_Arg(args,'d:\test.xls');
Client_OLE2.Invoke(workbook, 'SaveAs', args);
Client_OLE2.Destroy_Arglist(args);
/* release workbook */
Client_OLE2.Release_Obj(workbook);
Client_OLE2.Release_Obj(workbooks);
/* Release application */
Client_OLE2.Invoke(application, 'Quit');
Client_OLE2.Release_Obj(application);
END;
4. Save the form and compile it.
5. Run the form.
6. Execute the query in the block.
7. Click on the button.
8. An excel file will be created in the d:\ directory by the name test.xls.
Kind regards,
Alex
If someone's answer is helpful or correct please mark it accordingly.

PHD syncing and OmniGraffle package files

I am having an issue where package files synced to the home directory are appearing empty at a later date.
This issue seems to be directly related to OmniGraffle documents, affecting anything that is a .graffle (OmniGraffle Document) or .gstencil (OmniGraffle Stencil) that are stored as packages. We are using OmniGraffle 5.2.1. I have the ability to save the documents as a flat file type, I am unsure of the stencils.
Our enviornment - clients are running on MacBook Pro's with OS 10.5.8. Servers are Mac OS Server 10.5.8. Home directories are stored in an xSAN enviornment (2.2). Users belong to a group (portable homes) in OD that manages the Mobility Preferences and PHD syncing.
I performed a test where I logged the user in, added a .graffle doc to their desktop, logged them out, restarted and logged back in. Upon login, the "outer shell" of the package was still there, but had no contents.
Below I have a few excerpts from the FileSyncAgent-verbose.log from the users system. The file I was monitoring was named "NetworkDiagramMaster-2010_vB.graffle"
Logged user out:
1:: [573] PHD-L-fd-yCD8Svr1-smith Scanning flagged directory "Desktop/NetworkDiagramMaster-2010_vB.graffle/"
1:: [573] PHD-L-fd-yCD8Svr1-smith Scanning flagged directory "Desktop/NetworkDiagramMaster-2010_vB.graffle/QuickLook/"
1:: [573] network: PACKAGE ADD (DEEP) "Desktop/NetworkDiagramMaster-2010_vB.graffle" {(Priority=1, READY)}
1:: [573] <GO> network: PACKAGE ADD (DEEP) "Desktop/NetworkDiagramMaster-2010_vB.graffle" {(Priority=1, EXECUTING)}
1:: [573] ...<OK> : ADD ./data.plist
1:: [573] ...<OK> : ADD ./image130.png
1:: [573] ...<OK> : ADD ./image136.pdf
1:: [573] ...<OK> : ADD ./image137.pdf
1:: [573] ...<OK> : ADD ./image138.pdf
1:: [573] ...<OK> : ADD ./image139.pdf
1:: [573] ...<OK> : ADD ./image140.pdf
1:: [573] ...<OK> : ADD ./image141.emf
1:: [573] ...<OK> : ADD ./image142.emf
1:: [573] ...<OK> : ADD ./image143.emf
1:: [573] ...<OK> : ADD ./image144.emf
1:: [573] ...<OK> : ADD ./image145.emf
1:: [573] ...<OK> : ADD ./image146.png
1:: [573] ...<OK> : ADD ./image147.emf
1:: [573] ...<OK> : ADD ./image148.emf
1:: [573] ...<OK> : ADD ./image149.emf
1:: [573] ...<OK> : ADD ./image150.emf
1:: [573] ...<OK> : ADD ./image151.emf
1:: [573] ...<OK> : ADD ./image152.png
1:: [573] ...<OK> : ADD ./image153.png
1:: [573] ...<OK> : ADD ./image154.tiff
1:: [573] ...<OK> : ADD ./image155.bmp
1:: [573] ...<OK> : ADD ./image156.jpg
1:: [573] ...<OK> : ADD ./image157.pdf
1:: [573] ...<OK> : ADD ./image158.emf
1:: [573] ...<OK> : ADD ./image159.emf
1:: [573] ...<OK> : ADD ./image160.emf
1:: [573] ...<OK> : ADD ./image161.emf
1:: [573] ...<OK> : ADD ./image162.emf
1:: [573] ...<OK> : ADD ./image164.tiff
1:: [573] ...<OK> : ADD ./image165.png
1:: [573] ...<OK> : ADD ./image166.jpg
1:: [573] ...<OK> : ADD ./image167.ai
1:: [573] ...<OK> : ADD ./image168.bmp
1:: [573] ...<OK> : ADD ./image169.bmp
1:: [573] ...<OK> : ADD ./image170.bmp
1:: [573] ...<OK> : ADD ./image171.eps
1:: [573] ...<OK> : ADD ./image172.tiff
1:: [573] ...<OK> : ADD ./image173.jpg
1:: [573] ...<OK> : ADD ./image174.jpg
1:: [573] ...<OK> : ADD ./image175.jpg
1:: [573] ...<OK> : ADD ./image176.gif
1:: [573] ...<OK> : ADD ./image177.bmp
1:: [573] ...<OK> : ADD ./image178.png
1:: [573] ...<OK> : ADD ./image179.tiff
1:: [573] ...<OK> : ADD ./image18.wmf
1:: [573] ...<OK> : ADD ./image180.pdf
1:: [573] ...<OK> : ADD ./image20.pdf
1:: [573] ...<OK> : ADD ./image23.tiff
1:: [573] ...<OK> : ADD ./image24.tiff
1:: [573] ...<OK> : ADD ./image31.bmp
1:: [573] ...<OK> : ADD ./image32.wmf
1:: [573] ...<OK> : ADD ./image33.pdf
1:: [573] ...<OK> : ADD ./image34.pdf
1:: [573] ...<OK> : ADD ./image36.pdf
1:: [573] ...<OK> : ADD ./image37.pdf
1:: [573] ...<OK> : ADD ./image38.tiff
1:: [573] ...<OK> : ADD ./image39.pdf
1:: [573] ...<OK> : ADD ./image40.pdf
1:: [573] ...<OK> : ADD ./image41.pdf
1:: [573] ...<OK> : ADD ./image42.pdf
1:: [573] ...<OK> : ADD ./image44.pdf
1:: [573] ...<OK> : ADD ./image45.pdf
1:: [573] ...<OK> : ADD ./image46.pdf
1:: [573] ...<OK> : ADD ./image47.pdf
1:: [573] ...<OK> : ADD ./image48.pdf
1:: [573] ...<OK> : ADD ./image54.tiff
1:: [573] ...<OK> : ADD ./image55.pdf
1:: [573] ...<OK> : ADD ./image56.pdf
1:: [573] ...<OK> : ADD ./image57.pdf
1:: [573] ...<OK> : ADD ./image58.pdf
1:: [573] ...<OK> : ADD ./image59.pdf
1:: [573] ...<OK> : ADD ./image60.pdf
1:: [573] ...<OK> : ADD ./image61.pdf
1:: [573] ...<OK> : ADD ./image62.jpg
1:: [573] ...<OK> : ADD ./image63.jpg
1:: [573] ...<OK> : ADD ./image64.jpg
1:: [573] ...<OK> : ADD ./image65.jpg
1:: [573] ...<OK> : ADD ./image66.png
1:: [573] ...<OK> : ADD ./QuickLook/Preview.pdf
1:: [573] ...<OK> : ADD ./QuickLook/Thumbnail.tiff
1:: [573] ...<OK> : ADD ./QuickLook
1:: [573] <OK> network: PACKAGE ADD (DEEP) "Desktop/NetworkDiagramMaster-2010_vB.graffle" {(Priority=1, EXECUTING)}
1:: [573] -[SPeer(protected) processPackageJob:]: Found 'empty' package job. Ignoring.
I checked the users folder on the server and the file was in their desktop folder, completely intact.
Restarted, logged user back in:
0:: [117] [2010/03/24 11:08:07.598] PHD:Contents CONFLICT at "Desktop/NetworkDiagramMaster-2010_vB.graffle/"
0:: [117] [2010/03/24 11:08:07.598] PHD:--------------------------------------------------------------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- ---
0:: [117] [2010/03/24 11:08:07.598] PHD:AVV | CVV | Info:Finder | Info:Mod Date | Info:Mode | Info:NodeID | Info:Props | Info:User/Group | LVV | Object Name | ObjectID | Status
0:: [117] [2010/03/24 11:08:07.598] PHD:PHD-L-fd-yCD8Svr1-smith1269439466[] | PHD-L-fd-yCD8Svr1-smith1269439466[] | FF:0000 | 2010/03/24 10:58:19 | rwxr-xr-x | ID:0x0000000096957a | | U: 1104 G: 20 | PHD-L-fd-yCD8Svr1-smith1269439466[] | / | 0x1adb3d0 <x-coredata://68B7FC25-9F7D-4013-A591-E646B2A38B43/SNode/p15455> | P
0:: [117] [2010/03/24 11:08:07.598] PHD:PHD-L-fd-yCD8Svr1-smith1269439466[] | PHD-L-fd-yCD8Svr1-smith1269439466[] | FF:0000 | 2010/03/24 10:58:19 | rwxr-xr-x | ID:0x00000000168882 | | U: 1104 G: 20 | PHD-L-fd-yCD8Svr1-smith1269439466[] | / | 0x1a0a130 <x-coredata://5BC3195E-D57D-4CB2-BEEC-103892292F44/SNode/p15507> | D
0:: [117] [2010/03/24 11:08:07.599] PHD:CONFLICT at "Desktop/NetworkDiagramMaster-2010_vB.graffle/" auto-resolved: winning peer "network", new version vector: PHD-L-fd-yCD8Svr1-smith1269439466[]
1:: [117] PHD:Sync job generation pass 2 of 2 for "HomeSync_Mirror" took 0.08 seconds
1:: [117] PHD:Sync jobs for peer local
1:: [117] PHD: local: DELETE "Desktop/NetworkDiagramMaster-2010_vB.graffle" {(Priority=1, READY)}
1:: [117] PHD: local: ADD "Desktop/NetworkDiagramMaster-2010_vB.graffle" {(Priority=1, BLOCKED)}
1:: [117] PHD:Items to copy: 20, bytes to copy: 879
1:: [117] PHD:<OK> local: DELETE "Desktop/NetworkDiagramMaster-2010_vB.graffle" {(Priority=1, EXECUTING)}
1:: [117] PHD:<OK> local: ADD "Desktop/NetworkDiagramMaster-2010_vB.graffle" {(Priority=1, EXECUTING)}
1:: [117] PHD:-[SPeer(protected) processPackageJob:]: Found 'empty' package job. Ignoring.
This time, when checking the file on the desktop of the users system, the file was there, but there were no contents in the package.
The user has since logged out and left for the day, but I checked the server and for now, the file seems to be OK. It appears that when the person syncs later, the "blank" file is pushed from their system back up to the server. Then both files are blank.
I am not sure, but the phrase "Found 'empty' package job. Ignoring." appears a few times in the log. I think this may have something to do with the issue, but I am not sure how to fix it. I have many users and it is beginning to worry me that there may be other files which are not getting copied properly.
Has anyone out there run across this or have any ideas for a fix?

You need to ask the Dropbox people about that, but I'm pretty sure that it's like having an external drive and it can't sync that precisely. It will act just like dragging and dropping a file on an external drive and back up the whole thing each time.
For that kind of syncing you need an iDisk from Apple's MobileMe service. Certain note programs, like Yojimbo, are made with idisk syncing built in, but I don't think Devonthink supports that.

Capture all SQL statements and archive to file in real time

Want to Capture all SQL statements and archive to file in real time?
Oracle Session Manager is the tool just you need.
Get it at http://www.wangz.net
This tools monitor how connected sessions use database instance resources in real time. You can obtain an overview of session activity sorted by a statistic of your choosing. For any given session, you can then drill down for more detail. You can further customize the information you display by specifying manual or automatic data refresh, the rate of automatic refresh.
In addition to these useful monitoring capabilities, OSM allows you to send LAN pop-up message to users of Oracle sessions.
Features:
--Capture all SQL statement text and archive to files in real time
--Pinpoints problematic database sessions and displays detailed performance and resource consumption data.
--Dynamically list sessions holding locks and other sessions who are waiting for.
--Support to kill several selected sessions
--Send LAN pop-up message to users of Oracle sessions
--Gives hit/miss ratio for library cache,dictionary cache and buffer cache periodically,helps to tune memory
--Export necessary data into file
--Modify the dynamic system parameters on the fly
--Syntax highlight for SQL statements
--An overview of your current connected instance informaiton,such as Version, SGA,License,etc
--Find out object according to File Id and Block Id
Gudu Software
http://www.wangz.net

AnkitV wrote:
Hi All
I have 3 statements and I am writing some thing to a file using UTL_FILE.PUT_LINE after each statement is over. Each statement takes mentioned time to complete.
I am opening file in append mode.
statement1 (takes 2 mins)
UTL_FILE.PUT_LINE
statement2 (takes 5 mins)
UTL_FILE.PUT_LINE
statement3 (takes 10 mins)
UTL_FILE.PUT_LINE
I noticed that I am able to see contents written by UTL_FILE.PUT_LINE only after statement3 is over, not IMMEDIATELY after statement1 and statement2 are done ?
Can anybody tell me if this is correct behavior or am I missing something here ?Calling procedure must terminate before data is actually written to the file.
It is expected & correct behavior.

Block and character special files

Similar Messages

Maybe you are looking for