Block SE16 Access to Table PA0008

How to block se16 from accessing the table PA0008?

Hi,
you can block this Infotype for maintenance form the perticular user, this has to be done by the Basis people with certain Authorizations. So, ask them to do.
Regards,
Narendra.

Similar Messages

Block user access to table

Hi,
may be an easy question, but have not managed to find an answer yet.
I have a table MYTABLE and I have a view MYVIEW.
MYVIEW is set up as:
create or replace force view MYVIEW
as select * from MYTABLE
Is it possible to restrict direct access to MYTABLE so that users cannot run a select * from MYTABLE, but they can view the results only if they run select * from MYVIEW?
Thanks very mucyh in advance

Did you actually grant select on myview to user1? User1 does not need to have any privileges on the base table to be able to select from it. Unless there is a synonym defined pointing to the view (either a private synonym in user1's schema or a public synonym) user1 will need to qualify the view name with the owner.
What are you doing differently than this?
SQL> select * from t;
        ID DESCR
         0 One
         0 Two
         0 Three
SQL> create view my_view as select * from t;
View created.
SQL> create user user1 identified by secret;
User created.
SQL> grant create session to user1;
Grant succeeded.
SQL> grant select on my_view to user1;
Grant succeeded.
SQL> connect user1/secret
Connected.
SQL> select * from ops$oracle.my_view;
        ID DESCR
         0 One
         0 Two
         0 Three
John

Business user needs to view tables with out SE16 access

Hi ,
There is a requirement where business user ( Data team)    need to view some master and transactional data tables in production . But , as per our process , end users will not be given SE16 access .
Is there any solution where we can allow the end user to view tables with out SE16 access ?
Thanks in advance .
Thanks .
Dharma.

Hi,
Using Function Module C160_TRANSACTION_CALL you can call any tcode which dont have access..
Create a report and call function module and pass se16 to parameter .
CALL FUNCTION 'C160_TRANSACTION_CALL' "
EXPORTING
    i_tcode =        'SE16'            " sy-tcode
EXCEPTIONS
    ILLEGAL_INPUT = 1           "
    INTERNAL_ERROR = 2          "
    . " C160_TRANSACTION_CALL
now create a tcode for this report as ZSE16.,
hope this helps u.,
You can also create Data browser ( SE16 ) in report and display as ALV., using Field Symbols and RTTS.
Thanks & Regards,
Kiran

How does oracle accesses v$ tables or views in mount state

Hi All,
I want to know how oracle accesses fixed tables/views while the database is in mount state.
I did the following:
1. Started the database in mount state.
2. Query v$database ,v$datafile--Successful
3. Queried dba_data_files.---ERROR
SQL> select * from dba_data_files;
select * from dba_data_files
ERROR at line 1:
ORA-01219: database not open: queries allowed on fixed tables/views only
As per my understanding goes,all these tables are a part of Data Dictionary which is stored physically on system tablespace.
Now since the database is mounted ,it cannot access any part of system tablespace's data.Am I right??
So how does it queries v$ tables and other fixed database tables in mount state???
Thanks in advance
Saket Bansal

the v$(dynamic) view comes from instance
the dba(static) views comes from dictionary
but there is only one view can be look while instance is in nomount mode
and that is
v$instance ,,,
BUT ONLY THING I DON KNOW IS WHY WE CAN STILL DESCRIBE THE V$ VIEWS WHILE INSTANCE IS IN NOMOUNT MODE,,,
ORACLE instance shut down.
SQL> startup nomount;
ORACLE instance started.
Total System Global Area 285212672 bytes
Fixed Size 1248576 bytes
Variable Size 75498176 bytes
Database Buffers 205520896 bytes
Redo Buffers 2945024 bytes
SQL> desc v$datafile;
Name Null? Type
FILE# NUMBER
CREATION_CHANGE# NUMBER
CREATION_TIME DATE
TS# NUMBER
RFILE# NUMBER
STATUS VARCHAR2(7)
ENABLED VARCHAR2(10)
CHECKPOINT_CHANGE# NUMBER
CHECKPOINT_TIME DATE
UNRECOVERABLE_CHANGE# NUMBER
UNRECOVERABLE_TIME DATE
LAST_CHANGE# NUMBER
LAST_TIME DATE
OFFLINE_CHANGE# NUMBER
ONLINE_CHANGE# NUMBER
ONLINE_TIME DATE
BYTES NUMBER
BLOCKS NUMBER
CREATE_BYTES NUMBER
BLOCK_SIZE NUMBER
NAME VARCHAR2(513)
PLUGGED_IN NUMBER
BLOCK1_OFFSET NUMBER
AUX_NAME VARCHAR2(513)
FIRST_NONLOGGED_SCN NUMBER
FIRST_NONLOGGED_TIME DATE
SQL> desc v$tablespace;
Name Null? Type
TS# NUMBER
NAME VARCHAR2(30)
INCLUDED_IN_DATABASE_BACKUP VARCHAR2(3)
BIGFILE VARCHAR2(3)
FLASHBACK_ON VARCHAR2(3)
ENCRYPT_IN_BACKUP VARCHAR2(3)
HOW DOES THIS COME FROM ????
Edited by: jignesh kankrecha on Jul 6, 2009 8:12 AM

ACCESSING MULTIPLE TABLES THRU ONE SELECT STATEMENTS

How to access multiple tables through one single select statement and also using where condition in it for multiple fields which are from different tables. please give me any example from any tables ....thanks in advance

See the below example code :
REPORT ZMM_COST no standard page heading
 line-size 255
 message-id zwave .
type-pools
type-pools : slis.
Tables
tables : mara,
 makt,
 mbew,
 konp,
 pgmi,
 marc,
 RMCP3,
 sscrfields,
 mvke.
Internal Table for MARC and MARA
data : begin of i_join occurs 0,
 matnr like mara-matnr, " Material #
 meins like mara-meins, " Unit of Measure
 werks like marc-werks, " Plant
 zzdept like marc-zzdept," Department
 end of i_join.
Internal table for PGMI
data : begin of i_pgmi occurs 0,
 werks like pgmi-werks, " Plant,
 nrmit like pgmi-nrmit, " Material #
 wemit like pgmi-wemit, " Plant
 end of i_pgmi.
Internal Table for MBEW
data i_mbew like mbew occurs 0 with header line.
Internal Table for Output
data : begin of i_output occurs 0 ,
 matnr like mara-matnr, " Material #
 maktx like makt-maktx, " Material Desc
 VPRSV like mbew-VPRSV, " Price Control Indicator
 VERPR like mbew-VERPR, " Moving Avg Price
 meins like mara-meins, " Base Unit of Measure
 STPRS like mbew-STPRS, " Standard Price
 LPLPR like mbew-LPLPR, " Current Planned Price
 ZPLPR like mbew-ZPLPR, " Future Planned Price
 VPLPR like mbew-VPLPR, " Previous Planned Price
 kbetr like konp-kbetr, " Sales Price
 KMEIN like konp-KMEIN, " Sales Unit
 margin(5) type p decimals 2,
 vmsta like mvke-vmsta, " Material Status.
 end of i_output.
Internal Table for A004
data : i_a004 like a004 occurs 0 with header line.
Variables
data : wa_lines type i,
 wa_maktx type makt-maktx,
 v_flag type c.
ALV Function Module Variables
DATA: g_repid like sy-repid,
 gs_layout type slis_layout_alv,
 g_exit_caused_by_caller,
 gs_exit_caused_by_user type slis_exit_by_user.
DATA: gt_fieldcat type slis_t_fieldcat_alv,
 gs_print type slis_print_alv,
 gt_events type slis_t_event,
 gt_list_top_of_page type slis_t_listheader,
 g_status_set type slis_formname value 'PF_STATUS_SET',
 g_user_command type slis_formname value 'USER_COMMAND',
 g_top_of_page type slis_formname value 'TOP_OF_PAGE',
 g_top_of_list type slis_formname value 'TOP_OF_LIST',
 g_end_of_list type slis_formname value 'END_OF_LIST',
 g_variant LIKE disvariant,
 g_save(1) TYPE c,
 g_tabname_header TYPE slis_tabname,
 g_tabname_item TYPE slis_tabname,
 g_exit(1) TYPE c,
 gx_variant LIKE disvariant.
data : gr_layout_bck type slis_layout_alv.
Selection-screen
selection-screen : begin of block blk with frame title text-001.
parameters : p_werks like marc-werks default '1000' obligatory.
select-options : s_dept for marc-zzdept obligatory,
 s_matnr for mara-matnr,
 s_mtart for mara-mtart,
 s_vprsv for mbew-VPRSV,
 s_PRGRP for RMCP3-PRGRP MATCHCODE OBJECT MAT2 ,
 s_vmsta for mvke-vmsta.
selection-screen: end of block blk.
*SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
*PARAMETERS: p_vari LIKE disvariant-variant.
*SELECTION-SCREEN END OF BLOCK b3.
At slection screen events *
*-- Process on value request
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
Initialization *
Initialization.
g_repid = sy-repid.
sscrfields-functxt_01 = 'Clear Selection'.
selection-screen function key 1.
AT SELECTION-SCREEN.
case sscrfields-ucomm.
when 'Clear Selection' or 'FC01'.
clear: s_matnr,
 p_werks.
refresh: s_matnr,
 s_dept,
 s_mtart,
 s_vprsv,
 s_PRGRP,
 s_vmsta.
endcase.
Start-of-selection.
start-of-selection.
Clear the all data.
perform clear_data.
Get the data from PGMI Table
perform get_pgmi.
Get the data from MARC and MARA Table
perform get_mara_marc.
Get the data from MBEW Table
perform get_mbew.
Move the data into OUTPUT Table
perform move_output_internal.
*end-of-selection.
end-of-selection.
if not i_output[] is initial.
ALV Function Module
 perform print_alv.
endif.
*& Form get_pgmi
 Select the data from PGMI Table
FORM get_pgmi.
clear v_flag.
If Product group has a value at Selection-screen.
if not s_prgrp is initial.
 select werks nrmit wemit from pgmi into table i_pgmi
 where prgrp in s_prgrp
 and werks = p_werks
 and wemit = p_werks.
 v_flag = 'X'.
endif.
ENDFORM. " get_pgmi
*& Form get_mara_marc
 Select the data from MARA and MARC
FORM get_mara_marc.
if v_flag = 'X'.
 select amatnr ameins bwerks bzzdept into table i_join
 from mara as a inner join marc as b on amatnr = bmatnr
 for all entries in i_pgmi
 where a~matnr in s_matnr
 and b~werks = p_werks
 and b~zzdept in s_dept
 and a~mtart in s_mtart
 and a~matnr = i_pgmi-nrmit
 and b~werks = i_pgmi-werks.
else.
Get the data from MARA and MARC Table
 select amatnr ameins bwerks bzzdept into table i_join
 from mara as a inner join marc as b on amatnr = bmatnr
 where a~matnr in s_matnr
 and b~werks = p_werks
 and b~zzdept in s_dept
 and a~mtart in s_mtart.
endif.
clear wa_lines.
describe table i_join lines wa_lines.
if wa_lines is initial.
 message i000(zwave) with 'List contains no data'.
 stop.
endif.
sort i_join by matnr werks zzdept.
ENDFORM. " get_mara_marc
*& Form get_mbew
 Select the data from MBEW Table
FORM get_mbew.
Get the data from MBEW.
select * from mbew into table i_mbew
 for all entries in i_join
 where matnr = i_join-matnr.
clear wa_lines.
describe table i_mbew lines wa_lines.
if wa_lines is initial.
 message i000(zwave) with 'List contains no data'.
 stop.
endif.
sort i_mbew by matnr bwkey.
ENDFORM. " get_mbew
*& Form move_output_internal
 Final Results
FORM move_output_internal.
loop at i_join.
 clear wa_maktx.
Compare the data with MVKE Table
 select single vmsta from mvke into mvke-vmsta
 where matnr = i_join-matnr
 and vkorg = '0001'
 and vtweg = '01'
 and vmsta in s_vmsta.
 if sy-subrc ne 0.
 continue.
 else.
 i_output-vmsta = mvke-vmsta.
 endif.
 read table i_mbew with key matnr = i_join-matnr
 bwkey = i_join-werks
 binary search.
 if sy-subrc eq 0.
Price Control Indicator
 i_output-VPRSV = i_mbew-VPRSV.
Moving Average Price
 i_output-VERPR = i_mbew-VERPR / i_mbew-peinh.
Standard Price
 i_output-STPRS = i_mbew-STPRS / i_mbew-peinh.
Current Planned Price
 i_output-LPLPR = i_mbew-LPLPR / i_mbew-peinh.
Future Planned Price
 i_output-ZPLPR = i_mbew-ZPLPR / i_mbew-peinh.
Previous Planned Price
 i_output-VPLPR = i_mbew-VPLPR / i_mbew-peinh.
Base Unit of Measure - Added by Seshu 01/09/2007
 i_output-meins = i_join-meins.
 else.
 continue.
 endif.
Get the sales Price.
 perform get_sales_data.
 if i_mbew-VPRSV = 'V'.
Get the Percentage of Margin
 if i_output-kbetr ne '0.00'.
 i_output-margin = ( ( i_output-kbetr - i_mbew-VERPR )
 / i_output-kbetr ) * 100 .
 endif.
 else.
Get the Percentage of Margin
 if i_output-kbetr ne '0.00'.
 i_output-margin = ( ( i_output-kbetr - i_output-stprs )
 / i_output-kbetr ) * 100 .
 endif.
 endif.
Get the material Description from MAKT Table
 select single maktx from makt into wa_maktx
 where matnr = i_join-matnr
 and spras = 'E'.
 if sy-subrc eq 0.
 i_output-matnr = i_join-matnr.
 i_output-maktx = wa_maktx.
 endif.
 append i_output.
 clear : i_output,
 i_join,
 i_mbew.
endloop.
ENDFORM. " move_output_internal
*& Form get_sales_data
 Get the Sales Price for each material
FORM get_sales_data.
Get the data from A004 table to get KNUMH
Added new field Sales Unit - Seshu 01/09/2006
refresh : i_a004.
clear : i_a004.
data : lv_kbetr like konp-kbetr," Condition value
 lv_KPEIN like konp-kpein , "per
 lv_KMEIN like konp-KMEIN. " Sales Unit
select * from a004 into table i_a004
 where matnr = i_join-matnr
 and vkorg = '0001'
 and vtweg = '01'.
if sy-subrc eq 0.
 sort i_a004 by DATAB descending.
Get the Latetest Date
 read table i_a004 with key matnr = i_join-matnr
 vkorg = '0001'
 vtweg = '01'
 binary search.
Get the Sales Value
 select single kbetr KPEIN KMEIN from konp
 into (lv_kbetr,lv_KPEIN, lv_KMEIN)
 where knumh = i_a004-knumh
 and kappl = i_a004-kappl
 and kschl = i_a004-kschl.
 if sy-subrc eq 0.
 i_output-kbetr = lv_kbetr / lv_KPEIN.
 i_output-KMEIN = lv_KMEIN.
 endif.
endif.
clear : lv_kbetr,
 lv_kpein,
 lv_KMEIN.
ENDFORM. " get_sales_data
*& Form print_alv
 ALV Function Module
FORM print_alv.
Fill the Fiedlcat
PERFORM fieldcat_init using gt_fieldcat[].
gr_layout_bck-edit_mode = 'D'.
gr_layout_bck-colwidth_optimize = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_INTERFACE_CHECK = ' '
 I_BYPASSING_BUFFER =
 I_BUFFER_ACTIVE = ' '
 I_CALLBACK_PROGRAM = g_repid
 I_CALLBACK_PF_STATUS_SET = ' '
 I_CALLBACK_USER_COMMAND = g_user_command
 I_CALLBACK_TOP_OF_PAGE = ' '
 I_CALLBACK_HTML_TOP_OF_PAGE = ' '
 I_CALLBACK_HTML_END_OF_LIST = ' '
 I_STRUCTURE_NAME =
 I_BACKGROUND_ID = ' '
 I_GRID_TITLE =
 I_GRID_SETTINGS =
 IS_LAYOUT = gr_layout_bck
 IT_FIELDCAT = gt_fieldcat[]
 IT_EXCLUDING =
 IT_SPECIAL_GROUPS =
 IT_SORT =
 IT_FILTER =
 IS_SEL_HIDE =
 I_DEFAULT = 'X'
 I_SAVE = g_save
 IS_VARIANT =
 IT_EVENTS =
 IT_EVENT_EXIT =
 IS_PRINT =
 IS_REPREP_ID =
 I_SCREEN_START_COLUMN = 0
 I_SCREEN_START_LINE = 0
 I_SCREEN_END_COLUMN = 0
 I_SCREEN_END_LINE = 0
 IT_ALV_GRAPHICS =
 IT_ADD_FIELDCAT =
 IT_HYPERLINK =
 I_HTML_HEIGHT_TOP =
 I_HTML_HEIGHT_END =
 IT_EXCEPT_QINFO =
IMPORTING
 E_EXIT_CAUSED_BY_CALLER =
 ES_EXIT_CAUSED_BY_USER =
 TABLES
 T_OUTTAB = i_output
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " print_alv
*& Form fieldcat_init
 Fieldcat
FORM fieldcat_init USING e01_lt_fieldcat type slis_t_fieldcat_alv.
DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
Material #
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'MATNR'.
LS_FIELDCAT-ref_fieldname = 'MATNR'.
LS_FIELDCAT-ref_tabname = 'MARA'.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Material'.
ls_fieldcat-seltext_M = 'Material'.
ls_fieldcat-seltext_S = 'Material'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Material Description
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'MAKTX'.
LS_FIELDCAT-OUTPUTLEN = 35.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Description'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Price Indicator
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'VPRSV'.
LS_FIELDCAT-OUTPUTLEN = 7.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Price Control Indicator'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Moving Avg Price
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'VERPR'.
LS_FIELDCAT-OUTPUTLEN = 11.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Moving Avg Price'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Base Unit of Measure
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'MEINS'.
LS_FIELDCAT-OUTPUTLEN = 7.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Base Unit'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Standard Price
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'STPRS'.
LS_FIELDCAT-OUTPUTLEN = 11.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Standard Price'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Current Planned Price
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'LPLPR'.
LS_FIELDCAT-OUTPUTLEN = 11.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Current Planned Price'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Future Planned Price
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'ZPLPR'.
LS_FIELDCAT-OUTPUTLEN = 11.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Future Planned Price'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Previous Planned Price
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'VPLPR'.
LS_FIELDCAT-OUTPUTLEN = 11.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Previous Planned Price'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Sales Price
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'KBETR'.
LS_FIELDCAT-OUTPUTLEN = 13.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Sales Price'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Sales Unit
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'KMEIN'.
LS_FIELDCAT-OUTPUTLEN = 7.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Sales Unit'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
% of Gross Margin
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'MARGIN'.
LS_FIELDCAT-OUTPUTLEN = 13.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = '% of Gross Margin'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Material Status
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'VMSTA'.
LS_FIELDCAT-OUTPUTLEN = 13.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Material Status'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
ENDFORM. " fieldcat_init
**& Form f4_for_variant
 text
*FORM f4_for_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
 EXPORTING
 is_variant = g_variant
 i_save = g_save
 i_tabname_header = g_tabname_header
 i_tabname_item = g_tabname_item
 it_default_fieldcat =
 IMPORTING
 e_exit = g_exit
 es_variant = gx_variant
 EXCEPTIONS
 not_found = 2.
IF sy-subrc = 2.
 MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
 IF g_exit = space.
 p_vari = gx_variant-variant.
 ENDIF.
ENDIF.
*ENDFORM. " f4_for_variant
*& Form clear_data
 Clear the Internal table
FORM clear_data.
clear : i_output,
 i_join,
 i_mbew,
 i_a004,
 i_pgmi.
refresh : i_output,
 i_join,
 i_mbew,
 i_a004,
 i_pgmi.
ENDFORM. " clear_data
 FORM USER_COMMAND *
FORM user_command USING r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield. "#EC CALLED
CASE R_UCOMM.
 WHEN '&IC1'.
 read table i_output index rs_selfield-tabindex.
 SET PARAMETER ID 'MAT' FIELD i_output-matnr.
 SET PARAMETER ID 'WRK' FIELD p_werks.
 if not i_output-matnr is initial.
 call transaction 'MD04' and skip first screen.
 endif.
ENDCASE.
ENDFORM.
Reward Points if it is helpful
Thanks
Seshu

Attach a selection screen to a Tcode before accessing the table Contents

Hi All,
I have a requirement where when we access table from se16 we get a default selection screen...So the same selection screen should b displayed when that table is accessed directly with a transaction code attached to it..i mean the path is Tcode -->selection screen --> table/view contents.

Hi srinivas,
first let us discuss about your requirement.when you go to transaction se16 and enter a table name and then when you press enter you will get a selection screen to cretae or view contents of that table.you want to get that selection screen by entering any tcode in command bar.
if this is your requirement please follow these steps.
1)go to se16
2)enter the table name and then press enter.you will get a selection screen for that table as we discussed
3)in the selection screen go to menu item
System->Status...
you will get another screen
4)in that screen you will see
in SAP data->in Repository data->Program(Screen)
note that program name
5)go to se93(to create a transaction)
6)enter a tcode which you like and press create
7) you will get another screen and in that screen select the radio button
Program and selectio screen(Report Transaction)
8)you will get create report transaction screen
9)in that screen in program text box enter the program name that you noted earlier
10)check all the checkboxes in GUI support
11)save,check and execute the transaction.you will get the selection screen that you get when you use se16 for that table.
please check the screen by entering the tcode that you created in teh command bar.
please reward points if useful.

Port Access Mapping Table

PORT_ACCESS
TCP|*|*|192.168.1.121|* \
$C$[IMTA_LIB:conn_throttle.so,throttle,$1,1]\
$N421$ Too$ Many$ Connection$E
Anyone has any idea what does these lines do? Especially, I would like to know whether $1 refers to the 1st "*" or the 2nd "*" ??

I suggest having a look at the improved documentation for 6.1:
http://docs.sun.com/source/817-6266/filter.html
A particular IP address can be limited to how often it connects to the MTA by using the shared library, conn_throttle.so in the Port Access mapping table. Limiting connections by particular IP addresses may be useful for preventing excessive connections used in denial-of-service attacks.
conn_throttle.so is a shared library used in a PORT_ACCESS mapping table to limit MTA connections made too frequently from particular IP addresses. All configuration options are specified as parameters to the connection throttle shared library as follows:
$[msg_svr_base/lib/conn_throttle.so,throttle,IP-address,max-rate]
IP-address is the dotted-decimal address of the remote system. max-rate is the connections per minute that shall be the enforced maximum rate for this IP-address.
The routine name throttle_p may be used instead of throttle for a penalizing version of the routine. throttle_p will deny connections in the future if they�ve connected too many times in the past. If the maximum rate is 100, and 250 connections have been attempted in the past minute, not only will the remote site be blocked after the first 100 connections in that minute, but they�ll also be blocked during the second minute. In other words, after each minute, max-rate is deducted from the total number of connections attempted and the remote system is blocked as long as the total number of connections is greater than the maximum rate.
If the IP-address specified has not exceeded the maximum connections per minute rate, the shared library callout will fail.
If the rate has been exceeded, the callout will succeed, but will return nothing. This is done in a $C/$E combination as in the example:
PORT_ACCESS
TCP|*|25|*|* \
$C$[msg_svr_base/lib/conn_throttle.so,throttle,$1,10] \
$N421$ Connection$ not$ accepted$ at$ this$ time$E
Where,
$C continues the mapping process starting with the next table entry; uses the output string of this entry as the new input string for the mapping process.
$[msg_svr_base/lib/conn_throttle.so,throttle,$1,10] is the library call with throttle as the library routine, $1 as the server IP Address, and 10 the connections per minute threshold.
$N421$ Connection$ not$ accepted$ at$ this$ time rejects access and returns the 421 SMTP code (transient negative completion) along with the message �Connection not accepted at this time.�
$E ends the mapping process now. It uses the output string from this entry as the final result of the mapping process.

How do I replace someone else's Mac ID with my own? Bought iPhone second hand. Previous owner re-set the phone but his ICloud account stayed on now my phone. He uses his macID on his new iPhone now?? Any ideas, as this issue is blocking my access to iTune

How do I replace someone else's Mac ID with my own?
Bought iPhone second hand on TradeMe.
Previous owner re-set the phone but his ICloud account stayed on now my phone. He uses his AppleID on his new iPhone now and, understandably, does not want to give me his password. Any ideas?? Please.
This issue is blocking my access to iTunes and any other file from my home computer. It keeps on telling me that I have to autorise my computer to pass on files, yet, it seems, for all this to happen, I need to get logged in through the phone's Apple ID. This of course is different to my one on my computer - and I have no password for it.
This phone is not stolen!! I payed still a fair bit for it. Am still in contact with the previous owner. He doesn't know how to fix the problem either.
Would appreciate any suggestion ????
Thanks
SamSings

Settings>general>resets>erase all content and settings.
That will put it back to its out of the box state. Set it up with your own apple Id.

Error while accessing a Table on Oracle Database 10.2

Hi Experts,
We have a table that contains a CLOB datatype in one of its column. However when i tried to access the table i get the below error.
Table Name: discrete_jobs
Error:
(Error starting at line 1 in command:
select * from [email protected]
Error report:
SQL Error: ORA-22992: cannot use LOB locators selected from remote tables
22992. 00000 - "cannot use LOB locators selected from remote tables"
*Cause: A remote LOB column cannot be referenced.
*Action: Remove references to LOBs in remote tables.)
Pleas Help!
Regards,
Ravi R

See some work arounds - "How to select table from remote database having clob field</a>

Accessing internal tables at runtime.

Hi all,
I am writing a code where in i have to transfer data from excel to database table.
Iam getting the excel data in an itab. Can anybody help me with how to access internal tables at runtime ?
i am using the following code with sy-tabix. here, when the sy-tabix is odd it picks up the value,
but i want that within the same loop when i increment sy-tabix by 1, then it should fetch the second column of same row. But its not working as it shows an error that it does not permit subfield access.
the code is as follows:
LOOP AT t_tab[] into wa_tab .
data: l_tabix type sy-tabix,
 name_index type sy-tabix.
 data: c type i.
 l_tabix = sy-tabix.
 name_index = l_tabix+1.
 c = ( l_tabix mod 2 ).
******to check if sy-tabix is odd**********
 if c ne 0.
 READ TABLE t_tab into wa_tab index l_tabix.
 wa_product1-product = wa_tab-VALUE.
************incrementing sy-tabix*************
 READ TABLE t_tab into wa_tab index name_index. (here it shows error)
 wa_product1-product_name = wa_tab-value.
 endif.
endloop.
Thanks in advance.

Hi Omer,
Copy and paste this code.
=====================================
REPORT ztest_create_data_dynamic .
TYPE-POOLS: slis.
DATA: it_fcat TYPE slis_t_fieldcat_alv,
is_fcat LIKE LINE OF it_fcat.
DATA: it_fieldcat TYPE lvc_t_fcat,
is_fieldcat LIKE LINE OF it_fieldcat.
DATA: new_table TYPE REF TO data.
DATA: new_line TYPE REF TO data.
FIELD-SYMBOLS: <l_table> TYPE ANY TABLE,
<l_line> TYPE ANY,
<l_field> TYPE ANY.
Build fieldcat
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'SYST'
CHANGING
ct_fieldcat = it_fcat[].
LOOP AT it_fcat INTO is_fcat WHERE NOT reptext_ddic IS initial.
MOVE-CORRESPONDING is_fcat TO is_fieldcat.
is_fieldcat-fieldname = is_fcat-fieldname.
is_fieldcat-ref_field = is_fcat-fieldname.
is_fieldcat-ref_table = is_fcat-ref_tabname.
APPEND is_fieldcat TO it_fieldcat.
ENDLOOP.
Create a new Table
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = new_table.
Create a new Line with the same structure of the table.
ASSIGN new_table->* TO <l_table>.
CREATE DATA new_line LIKE LINE OF <l_table>.
ASSIGN new_line->* TO <l_line>.
Test it...
DO 30 TIMES.
ASSIGN COMPONENT 'SUBRC' OF STRUCTURE <l_line> TO <l_field>.
<l_field> = sy-index.
INSERT <l_line> INTO TABLE <l_table>.
ENDDO.
LOOP AT <l_table> ASSIGNING <l_line>.
ASSIGN COMPONENT 'SUBRC' OF STRUCTURE <l_line> TO <l_field>.
WRITE <l_field>.
ENDLOOP.

Accessing BKPF table takes too long

Hi,
Is there another way to have a faster and more optimized sql query that will access the table BKPF? Or other smaller tables that contain the same data?
I'm using this:
   select bukrs gjahr belnr budat blart
   into corresponding fields of table i_bkpf
   from bkpf
   where bukrs eq pa_bukrs
   and gjahr eq pa_gjahr
   and blart in so_DocTypes
   and monat in so_monat.
The report is taking too long and is eating up a lot of resources.
Any helpful advice is highly appreciated. Thanks!

Hi max,
I also tried using BUDAT in the where clause of my sql statement, but even that takes too long.
    select bukrs gjahr belnr budat blart monat
     appending corresponding fields of table i_bkpf
     from bkpf
     where bukrs eq pa_bukrs
     and gjahr eq pa_gjahr
     and blart in so_DocTypes
     and budat in so_budat.
I also tried accessing the table per day, but it didn't worked too...
   while so_budat-low le so_budat-high.
     select bukrs gjahr belnr budat blart monat
     appending corresponding fields of table i_bkpf
     from bkpf
     where bukrs eq pa_bukrs
     and gjahr eq pa_gjahr
     and blart in so_DocTypes
     and budat eq so_budat-low.
     so_budat-low = so_budat-low + 1.
   endwhile.
I think our BKPF tables contains a very large set of data. Is there any other table besides BKPF where we could get all accounting document numbers in a given period?

Error while accessing BSAD Table with dunning date

Hi ,
I developed a report for FI module accessing BSAD table with default customer ranges and for specific dunning dates - It ran for a very long time and timed out - (I know this is due to huge volume of data) -
Is there any way to access BSAD table easily with Dunning dates (Other than creating Index on it) ???
Or any standard function module available ??
Regards
Rajesh.

Hi
Try the below tables for the dunning data details:
MHND            Dunning Data
MHNDO           Dunning data version before the next change
MHNK            Dunning data (account entries)
MHNKA           Version administration of dunning changes
MHNKO           Dunning data (acct entries) version before the next chang
SKS

TIME_OUT when accessing Oracle table from SAP using native SQL

Hi,
I have a problem in one of my native SQL statement. It takes a long time accessing the table considering that the number of records to be retrieved is only small.
Something happened on the Oracle system. But, stilll to be confirmed. Looking further at the issue, it seems that when the value in the where clause equated is a literal (meaning the value is not declared in DATA or CONSTANTS in the ABAP Program)
Example
1.
EXEC.
WHERE FIELD = '1'
ENDEXEC.
instead of
2.
CONSTANTS: c_1 value '1'.
EXEC.
WHERE FIELD = c_1
ENDEXEC.
i found that when the way of coding is same as Example 1, a time-out error occurs. But when in Example 2, no issue.
Can someone explain this?
Thanks!

Repetitively asking the same question again and again is against the forum rules.
Please post an explain of the SQL statement on the remote machine.
Markus

How to access a table present in same database

I have one mc_pl_st tables in mcs_owner schema, but am accessing from another schema age_owner schema,but both schemas are in same database.
Shall I use user_name.table_name to access the table present in other schema present in same database
Pls suggest,
Thanks

T.PD wrote:
Skalny wrote:
859486 wrote:
Shall I use user_name.table_name to access the table present in other schema present in same databaseYes, you must use schema name if you want to access table or other object, which belongs to different user.You could also use synonymes created by the tables owner:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_7001.htm
How ever, the user accessing must have SELECT (and INSERT/UPDETE/DELETE?) permissions granted.And also we can use public synonymes.

SQL error in the database when accessing a table.

Hi,
I got below error at production server. Please suggest how to reslove this error.
 
 
 
Runtime Errors DBIF_RSQL_SQL_ERROR
 
Exception CX_SY_OPEN_SQL_DB
 
Date and Time 02.01.2011 15:55:06
 
 
 
 
 
Short text
 
SQL error in the database when accessing a table.
 
 
 
How to correct the error
 
Database error text........: "[10054] TCP Provider: An existing connection was
 
forcibly closed by the remote host.
 
[10054] Communication link failure"
 
Internal call code.........: "[RSQL/INSR/SWFCNTBUF ]"
 
Please check the entries in the system log (Transaction SM21).
 
 
If the error occures in a non-modified SAP program, you may be able to
 
find an interim solution in an SAP Note.
 
If you have access to SAP Notes, carry out a search with the following
 
keywords:
 
 
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
 
"CL_SWF_CNT_FACTORY_SHMEM======CP" or "CL_SWF_CNT_FACTORY_SHMEM======CM001"
 
| "ADD_INSTANCE"
 
 
 
Information on where terminated
 
Termination occurred in the ABAP program "CL_SWF_CNT_FACTORY_SHMEM======CP" -
 
in "ADD_INSTANCE".
 
The main program was "SAPMSSY1 ".
 
 
In the source code you have the termination point in line 16
 
of the (Include) program "CL_SWF_CNT_FACTORY_SHMEM======CM001".
 
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
 
procedure "ADD_INSTANCE" "(METHOD)", but it was neither handled locally nor
 
declared
 
in the RAISING clause of its signature.
 
 
The procedure is in program "CL_SWF_CNT_FACTORY_SHMEM======CP "; its source
 
code begins in line
 
1 of the (Include program "CL_SWF_CNT_FACTORY_SHMEM======CM001 ".
 
 
 
 
Source Code Extract
 
 
Line
SourceCde
 
 
1
METHOD add_instance .
 
2
 
3
data: ls_id type swfcntbuf.
 
4
 
5
check buffer method - store in local buffer if necessary
 
6
retcode = cl_swf_cnt_factory=>add_instance( ibf_por = ibf_por instance = instance ).
 
7
 
8
CHECK m_buffer_method EQ mc_buffer_shared.
 
9
 
10
append key to list of tasks to add stored in database table SWFCNTBUF
 
11
will be evaluated by build process for shared memory area (UPDATE_BUFFER method)
 
12
 
13
ls_id-mandt = sy-mandt.
 
14
ls_id-id = ibf_por.
 
15
 
>>>>>
INSERT swfcntbuf CONNECTION r/3*wfcontainer
 
17
FROM ls_id.
 
18
 
19
IF sy-subrc EQ 0.
 
20
Commit seems to be necessary always, even if INSERT has failed, to get rid of
 
21
database locks
 
22
COMMIT CONNECTION r/3*wfcontainer.
 
23
ENDIF.
 
24
 
25
ENDMETHOD.
 

duplicate here SQL error in the database when accessing a table.
Do not post the same question in more than on forum.

Block SE16 Access to Table PA0008

Similar Messages

Maybe you are looking for