Blocking / obstructing clickable area

From the title, you'd probably think I am facing a difficulty where some element is blocking another, such as a non-clickable image being absolute-positioned right over top of a button.
However, it is the opposite: I am wondering if it is possible to intentionally block a clickable area by placing some sort of other element (perhaps a clickable element that does nothing when you click it) over top.  How does the stack work when you add elements -- is the last element added the "top" one in the view?  And, if so, does its clickable properties take precedence over any clickable items underneath of it?
I'm specificallty trying to set some sort of "non-clickable" invisible blocker overlay on top of a normally-clickable area, in order to prevent clicking it until a certain condition has been met (in this case, I can't simply turn on or off a "clickable" property for that element...)

Did the trick, thanks!
If anybody has a suggestion for how to make an "invisible" button (but one that is technically still there, so technically I am talking about doing a "transparent" button, not one where visible=false), let me know.
Throwing a button higher up over the click area blocked it nicely

Similar Messages

  • [SOLVED]dzen clickable areas

    I am using dzen as a status bar in DWM and I want to know how I get the clickable areas to work. I have looked over all the place and I am still confused. Also I am piping conky to dzen.
    Any help would be much appreciated.
    I solved my problem. It just took reading dzen's documentation some more.
    Last edited by xly15 (2012-11-30 21:33:11)

    I am using dzen as a status bar in DWM and I want to know how I get the clickable areas to work. I have looked over all the place and I am still confused. Also I am piping conky to dzen.
    Any help would be much appreciated.
    I solved my problem. It just took reading dzen's documentation some more.
    Last edited by xly15 (2012-11-30 21:33:11)

  • Blocking of business area for further posting

    Hi
    We want to block a business area for any further posting into it.
    Pl. explain how to do that.
    Thanks
    shivaji

    Hi
    In T.Code OX03 ypu can delete the particular business area. Before deleting check whether you have the autorization for the same or not.
    If it is helpful to you plz assign points
    Regards
    Tapan Patro

  • Block at sales area level??

    Hi Guys,
    I need some help in understanding the issue here, Please find the issue below.
    Please enter the Y7 block at the sales area level for 60& 62 sales area.
    Thanks.
    MM

    Hi,
    Use VD05 and block for sales areas 60&62 at sales area leavel using block Y7.
    Regards
    Raj

  • Sales order is on overall block still requirements are passed to md04/md07.

    Hello Experts.
    Sales order is on overall block still requirements are passed to md04/md07.
    Please suggest...

    Hi Experts,
    Issue:  Sales orders are on overall block at header level. still sales orders are passing demand in MD04 and MD07 -
    here in this case the actual scenario is
    This Sales order was created on 09/28/2007. with overall block at header level.
    then sevral times header block for this order was removed & it was last set on 8 feb. 2009.
    after this, there was no change in delivery block at header till the date.
    in mean time at every month there was program from legacy system which used to change the below info from SO
    (In schedule lines --> shipping tab).
    except Delivery date.
    Delivery date         D   08/31/2007
    Goods issue date          07/30/2009
    Loading date              07/30/2009
    Material avail.date       07/30/2009
    Transportation Plan. Date 07/30/2009.
    *if we replicate this scenario in dev. and check this, system will not allow to keep above dates as delivery date is in past.
    Now if we check SO is on oveall block at header, but we can see Ruquirement for the same SOs in MD04.
    (*Note : here we found that date in MD04 for requirement of this SO, is same as date on which legacy system changed the data in SO for schedule line.)
    we have replicated the sales cycles like this in development with different possibilities of Blocks on SO header as well as Item level. but they are working fine with dev. and quality system, as all config. settings are fine.(as suggested above by experts).
    but it seems like a bug kind of thing.
    kindly revert if someone has faced issue like this ,knows to get rid of it.
    Regards,
    Sujit

  • Resizing a buttons clickable area

    Good day gentlemen,
    I am trying to make a brain anatomy game in flash CS3 and I am having some difficulty getting the buttons to respect certain proportions. Allow me to elaborate.
    I start with a picture like this one:
    [IMG]http://i38.tinypic.com/2a9dv7n.jpg[/IMG]
    http://tinypic.com/m/beu5uq/2
    And then I bring it into photoshop and make a different layer for each different structure (in the screenshot I only did it for one structure but you get the point)
    [IMG]http://i37.tinypic.com/s2fpq9.jpg[/IMG]
    http://tinypic.com/m/beu5xy/2
    Now what I would like to do is import my .psd file into flash and make every layer a different button. But I don't know of a way to view layers of a .psd file in flash. But here's the bigger problem. As you can see, it makes the "clickable" area for the button a rectangle shape.
    [IMG]http://i36.tinypic.com/x52mar.jpg[/IMG]
    http://tinypic.com/m/beu621/2
    Whereas I would like for it to be the shape of the specific structure. If the clickable area is a rectangle then there is an overlap onto other structures which is not at all ideal. Especially when I get into smaller structures. What I want is for the button to be exactly like the layer in photoshop. Does anyone know how to accomplish this?

    I really want to thank skarthiks for responding. Here is the part I have a hard time with.  Your instructions were clear and nicely stated. But from what you are telling me there is no way for the imported layers to take on the shape they had in Photoshop?
    Here is the link to the video:
    http://www.screencast.com/users/canadian_hockey1/folders/Jing/media/1ac7b639-0272-4f80-9a1 0-91bf1622aa5d
    this is getting rather frustrating because it so simple. Again I want to thank everyone and anyone for responding. It's going to be a rather stupid error that's causing this.
    If you wish to try it yourself, I've uploaded the .psd file on rapidshare here
    http://rapidshare.com/files/414702909/figure_20_week_1.psd
    I really don't see where I'm going wrong. If you require more video/screenshots I will be happy to upload them for everyone

  • How to block the " you are lucky visitor" popup each time I open the Firefox. I can not find any information in the add on lists et al. Thanks!

    Recently, my Firefox browser v25.0 is experiencing a popup problem. A popup message saying "... you are today's luck visotor, please click Ok to ontinue". I have to click Ok then I can continue to use the browser. Is this a popular problem? Please advise how to block this popup. Thanks!

    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • Blocked Account- Skype are you serious...look at a...

    Is this truly the customer service you want to withhold.  To continue business and to create more revenue, the best and number one way is "GREAT CUSTOMER SERVICE" BUT "YOU HAVE FAILED"     this account, and I am not afraid to give you my number 760-712-4828 , but you not only took money from me to continue a subscription I could no longer afford, not for any other reason.  You penalized me, by blocking my account, the last 5 days I did have on my account, and the only $7.12 is blocked as well.  Is there anyway I and all these other messages can be helped. 
    This will be a catastrophic blunder and the rewards that you are trying to achieve, will be awful.  I am not trying to say this will happen and I want this to happen.  But Skype...it is obvious from you message boards, that you need to create a better way to communicate, and a better way to treat those that have actually given you money for your service. 
    Just the most recent history should show you what will happen.  Look at Netflicks...
    Please do not ignore your customers.  We just want our monies...or our service...to be unblocked, and a way to contact you when such an occasion arises.
    candyloverone
    760-637-6992
    please, I am only asking for the little bit I paid for.  Also, for you to remember, before the demise of Skype.
    Do you need help...and advise on Customer service...I have a  friend who has a proven record of turning companies around.  Let me help.

    summerjohnston wrote:
    So I ordered the iphone at 3:01am on 2/9.  Just like everyone else, I have been waiting patiently to receive the phone.  As of this morning, the phone was still saying expected ship date of 2/18.  That sucks, but I have been patient.  Then I get an email today, that my order has been CANCELLED!  I didn't cancel, and there was nothing wrong with my paysource.  When I called Verizon (outraged, fyi) they could not tell me WHY the order was cancelled, and all they could offer me is to place a new order.  When I asked them if they could send the phone out right away, they told me they couldn't, and the expected ship date was 2/18/11.  I have NEVER been so furious with service from a company.  While the customer service rep was great, and very apologetic, it still doesn't do a lot as far as cred for Verizon.  I am tempted to say screw the whole thing, and get the new Droid.  Thanks for having me wait YEARS for this phone, only to be utterly disappointed and disgusted with the whole flipping experience. Shame on you.
    It's still going to be shipped as if your order before had gone through, so why don't you just place another order online?

  • Sales employee field in VA01 blocked & which fields are must to see in COPA

    Hi,
    I am able to see all the transactions from SD  and FI direct postings coming into COPA.
    But the  management wants to see the profitability in Sales employee level also.
    I am able to give the sales employee wise details in FI but in SD vao1 while I create a sales order the sales employee field in account assignments is blocked.
    I gave the same information in the other tab Partner function, but still I am not able to see the transaction in COPA  at sales employee level.
    Also please let me know if I have make all the characteristics I am seeing in COPA S mandatory like(WBS element, sales order, sales employee, ) mandatory or is it sufficient that I keep only profit center as a mandatory field.
    I feel profit center should be kept as mandatory field in SD and FI posting while remaining are all optional.
    Please explin me how I should unblock the sales employee in Va01 and also let me know the logic why we have to keep the fields optional or mandatory.
    Please assist me.
    Thanks,
    Shilpa.

    Hi Shilpa
    Leave the fields as they are.. NO need to make any thing as optional or mandatory
    Include the sales employee as partner fucntion in your sales order... You also need to write derivation rules in KEDR for the same
    You will need to write 2 derivation rules for each partner function
    1. In one Der Rule, make the sale order item KDPOS as constant value 0000
    2. In the other one, dont make it a constant....Leave it as it is
    DERIVATION RULE 1
    SOURCE FIELDS
    VBPA-VBELN = COPA-KAUFN
    VBPA-POSNR = COPA-KDPOS
    VBPA-PARVW = GLOBAL-USERTEMP1 (Click on Magnifying lens.. Specify Constant = Your SD Part Function)
    TARGET FIELDS
    VBPA-KUNNR/PERNR = COPA-WW100 / KMVTNR
    DERIVATION RULE 2
    SOURCE FIELDS
    VBPA-VBELN = COPA-KAUFN
    VBPA-POSNR = COPA-KDPOS (Click on Magnifying lens.. Specify Constant = 0000)
    VBPA-PARVW = GLOBAL-USERTEMP1 (Click on Magnifying lens.. Specify Constant = Your SD Part Function)
    TARGET FIELDS
    VBPA-KUNNR/PERNR = COPA-WW100 / KMVTNR
    Regards
    Ajay M

  • SMQ2 queue is blocked and messages are in u201Cwaitingu201D status in RWB

    Hello,
    A SMQ2 queue is blocked with XXX data and these messages are in u201Cwaitingu201D state in RWB. 
    What could be the reason?
    Im sure its not because of the space because all the messages which flow after that was there in the directory.
    Regards,
    Mathangi

    Hi Mathangi,
         double click on the queue and click on the first message which will direct to MONI
    --> check what exactly the error is and try to resolve the error accordingly
    if you are unable to do that
    Right click on the first message and save LUV it will be saved in SMQ3
    then unlock the queue and execute again it will process successfully..
    later you can process the message which is saved
    Regards,
    Naveen

  • Blocking of business area

    Hi guru
    One vendor(one time vendor) is created with purchasing organisation as MKTG.But users are posting to one business area (CORP) which we  WANT TO BLOCK.Actually it should be posted to MKTG business area.Now how to block that vendor for posting to CORP business area.
    Thanks
    Shivaji

    Hi,
    You can use User Exit in this particular case.
    regards,
    radhika

  • RBL blocking users that are have stmp authentication setup

    Hi my server all of a sudden started blocking my users from sending email even though they are setup to authenticate when sending email. This has happened on two different ISPs (verizon and road runner) on both mac (apple mail) and pc (outlook).
    This is the error message I getting from Apple's mail.app:
    "The server response was: Service unavailable; Client host [70.20.35.100] blocked using sbl-xbl.spamhaus.org; http://www.spamhaus.org/query/bl?ip=70.20.35.100"
    Shouldnt when the user when sending an email bypass the RBLs?

    If I remember my correctly the smtp user must pass all parts of the line:
    smtpdclientrestrictions = permitsaslauthenticated, permit_mynetworks, rejectrblclient zen.spamhaus.org, rejectrblclient bl.spamcop.net, permit
    I could be wrong and it could be an ordering issue so I would look at your postconf -n to see how this line reads in your setup. Maybe you have rejectrblclient zen.spamhaus.org listed before permitsaslauthenticated.
    Either way you need to contact spamhaus and get your users e-mail off the RBL and find out if you got any spammer viruses running on your clients.

  • Clickable areas on a picture (map) ?

    Hi,
    I have a map of a country on the left and a panel on the right.
    I want to make the cities on the map clickable so that when a user clicks on one of them, the details of the city is displayed on the right panel.
    1) How do i render certain areas of a picture (map) clickable ?
    2) what about the interaction with the right panel ? how do i do that ?
    Thanks for helping, i am a beginner.

    From a very high-level, a solution could be:
    Start with a Canvas control for your map.  We want this because a Canvas supports absolute positioning.
    Set the map image to be the Canvas background: canvas.setStyle( "backgroundImage", urlToImage );
    Use a Canvas for each clickable map city using cooridates (x,y) for absolute positioning over each city.
    Set the data of each canvas-city to be the city name or some other identifier.
    When you click on a canvas set an application variable of the city name/identifier using a "click" event listener.
    Bind the right panel's display to the "current city" application variable.
    Is that what you were looking for?

  • I am getting popups that aren't blocked. These are like no popups I've seen before

    suddenly, I am getting a strange type of popup that isn't blocked. It must be manually closed, stays on the page in the same place.
    It appears on Google constantly
    Thanks
    EDIT: A screen shot resides here http://tinypic.com/r/xqizcp/5

    Do a malware check with some malware scan programs. You need to scan with all programs because each program detects different malware. Make sure that you update each program to get the latest version of the database before doing a scan.
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and Searches are redirected to another site

  • Can anybody share with me software products that block **** etc. that are compatible with Apple computers? My boys have a MacBook

    Can anyone share with me which 3rd party software that blocks **** is compatible with Apple computers?

    Each child should have his own account, and understand that others' accounts are not to be tmapered with.
    Parental Controls is already built into Your Mac. All you have to do is configure it. This Video explains the basics.
    Mac OS X: Parental Controls
    Pørn may give your child an odd view of human interactions and be repugnant to you, but that is trivial compred to the real threat on the Internet: Unsupervised chat. Pørn will not arrange to meet your child after school ...

Maybe you are looking for