Blue led

I have the z1, before five days was in the shop for problem with loudspeaker, then repairer say that phone still waterproof, but yesterday come into contact with water and then I turned it off, but he himself turned on then i use restart button and now he won't turn on and when i connect with USB blue light and nothing happen. I tried power and volume up but he only vibrate and nothing happens.
Could you please help me?
Sorry for bad english.

If you bought the phone on a different country, warranty its only for that specific country, you will have to contact Sony Xperia Care from that country and perhaps you could ship it
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

  • Gaming 7 - flashing blue led.

    I recently build a computer and everything was working fine until yesterday when the computer wouldn't start. When pressing the power button normally nothing would happen but when pressed down for a while, a blue LED on the motherboard (under the MSI Dragon heatsink?) would start flashing and wouldn't stop unless the power cord was removed.
    Since then I removed all the components and tested them with another motherboard and everything works fine. Does anybody know what could be the issue?

    Like you wrote, my motherboard is the Z97-Gaming 7 and according to the manual it is for "BIOS A". The power and reset buttons on the motherboard are lit but nothing happens when pressed shortly. When I press the power button for a long time, the "BIOS A" LED starts blinking continuously but nothing else happens.
    OS: Windows 8.1 Pro - 64-bit
    Motherboard: Z97-Gaming 7
    CPU: i7-4790k
    RAM: 2 x 8GB CORSAIR Vengeance Pro 16GB DDR3 1600
    HDD: Kingston V300 240GB SSD + 8TB of various HDDs
    VGA: MSI Gaming Video Card - N760 - TF 2GD5/OC GeForce GTX 760
    Sound card: Creative Sound Blaster Z
    WIFI card: TP-LINK TL-WDN4800 Network adapter
    PSU: Thermaltake Toughpower 850W 80 Plus Gold
    Case: Cooler Master HAF Stacker 935
    All these components have been tested with another motherboard and they all work perfectly.

  • Blue LED Driving Me Mad!!!

    Greetings one and all from a UK based 8820 newbie.
    When my BlackBerry is connected via bluetooth to my handsfree car kit the blue LED flashes constantly which is a little distracting during the day (it's mounted in a Brodit holder fitted in my line of sight) but at night it's just too much. What i can't work out is how to turn this blue LED off.
    I hope that someone can help me otherwise it looks like some black tape will be stuck over it and i don't want to do this.
    Thanks in advance!!!
    Neil.  
    Solved!
    Go to Solution.

    You can disable the Bluetooth LED by going to Options > Bluetooth. Press the Menu key and select Options. Set the LED Connection Indicator option to Off.
    Note: I have heard that setting this option to off can sometimes cause Bluetooth connection issues. So if your connection has problems after disabling this then try setting it back on. 

  • Blue LED Lighting showing up as purple

    Using a Canon 60D and having some issues taking photosgraphs that use intense blue LED lighting and showing up as purple instead of blue
    Below is an example of  a set I am trying to shoot but the blue is turning out purple.
    I have tried all the different color balance settings which will affect white causing it to be a cool white and all the way to warm white but the blue uplighting remains purple.
    What I also found interesting is that I took some shots with my iphone and the blue comes out correctly.
    Anybody know how I can fix the problem or is this a limit with the sensor on the 60D? Would a higher end Canon camera fix this?

    The camera display is a jpg that has the white balance and camera style settings applied, even if you're shooting in raw.
    Also, when you go back, if you have another lens try a photo with that, even if it's a different focal length.  I'm guessing it's probably a combo of white balance, over-exposure color shift, purple fringing CA, and maybe some camera settings tossed in for good measure.  I'm sure I'll be around there this weekend, I'll drag a camera around for grins.

  • Two major issues, Blue LED bootup causing factory wipe EVERYTIME and BBLink "unable to save name"

    Please help, I got this crazy issue too!!!

    Hello, If anyone is willing to reproduce this issue once more, we would like to obtain logging afterwards to see what is occurring.  Please also include screen shots post boot and the software version upgraded from. To obtain logs please go to Settings/Security and Privacy/BlackBerry Software Togging Tool From here please choose to Save Log Snapshot.  Do not submit, but instead please email the logs files located in device memory/Documets/Logs/ to [email protected]  Please include BLUE LED ATTN: MICK in the subject and then reply to this post once the logs have been emailed. I would like to have a developer review this as we have not been able to reproduce.

  • Blue LEDs are off on my Qosmio G40 series notebook

    All the blue leds on the top of my laptop have gone out.
    Does anyone know how to bring them back on?

    Yes I'm sorry for the lack of info. I have a Qosmia G40. It has Vista installed.
    I have not uninstalled any programme lately.
    I just switched it on one day and after a short while noticed the leds on the volume button, the vidoe controls and the spread of blue indicators across the top of the keys were not lit.
    Other than that the controls are working.
    Regard Sean.

  • Blue LED has simply failed

    Since a couple of days ago, the blue LED on my MC 3 TB simply does not work at all, regardless of the LED setting in Settings. The white / yellowish LED is still working and on while the device is booting.  Other than the blue LED, MC operates normally. Has anyone had a similar problem? I guess it is very likely that it is a hardware issue and that the blue LED has simply failed for some reason.

    Yes, my blue LED is dead, too.  Which is a bit confusing when you're trying to tell if you have a flashing white light or a flashing yellow light... ('white' is yellow and blue, I think).

  • Monitor f1503 - blue led power light not showing power available. unable to turn on

    Hi ,
    I have had my f1503 monitor in storage for a while and it was working at last usage. Connected all power and PC connections correctly and turned the power on but no blue led light working and unable to turn on the monitor. Checked the power adaptor - green led lit on power transformer and 12.33 volts were showing at the output end of the monitor power plug.  The monitor power plug was inserted into the correct socket. Please help?
    Does the monitor have a fuse that may have blown? 
    This question was solved.
    View Solution.

    Hello Bruce123456,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you are having issues where your HP Pavilion f1503 Flat Panel Monitor is not coming on. The issue you are describing appears to be a physical issue and I think it would be best if you contact HP Technical Support for repair options.
    I would like to thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • GTX 680 Lightning Blue LEDs Flickering

    Just noticed that the lower half of the blue LEDs on the back of my 680 Lightning flickering (the half closest to the motherboard) - most of the time they're a steady blue.
    Any idea if this is normal, and what that means?

    Thanks for your reply, much appreciated!
    Quote from: Svet on 22-August-12, 22:49:17
    depend of VGA load the phases are switched on or off,
    and those leds are their visual indicators.
    etc when VGA is max used, say playing games, all led should light.
    when the card is in idle, not need phases will turned off to save power

  • LWAP AP1131 Is there any way to turn off the Round BLUE LED

    The 1131 Access point in IOS mode had an option to turn off the BLUE LED circle on the access point. The access point has been converted to LWAP and connected to controller and now the BLUE LED circle is back.... is there any way to turn it off ??
    Can not see an option on the controller.
    Very bright in a dark room (ie hospital beds...)
    Charles

    Hi tdennehy
    Well, first of all thanks a lot for your replay. We have perfect LOS with certainly more than 60% of the Fresnel zone being clear. The Yagi antennas are pointed at each other with no doubt, we actually got while in the "install root" and "install non-root" bridge mode the I and R LEDs on and stable, and S blinking. At times we got all the LEDs blinked fast but I guess we were passing through some strong signal concentrations. Heh, the client sugested to install the Yagi antennas as the omni but I just ingnored him, what else could I say hehe.
    When we were installing all the equipment I had a play with different channels and it seemd like CH 1 worked best. The antennas use the cable they come with because the BR-1310 bridges we have installed right beneath the antennas, only the coaxials cables go down to the office to the power injectors.
    Please see the attached screenshot from the signal and SNR reading. It seems like we have a little bit of noise. The signal was -61dB to -63dB on the installation day but 2 weeks later it went down to about -65dB.
    So, you suggest we rotate both Yagi antennas by 90 degrees correct? I guess one needs to be turned clockwise and another anticlockwise correct? What de we actually gain by doing that? We change the polarization from vertical to horizontal? Could you please explain it to me a little bit more?
    Thanks in advance for sharing your experience. I am going to troubleshoot this on Monday so I would be great if you could give me some sugesstions. I thought of changing the Yagi antennas to 19dB direccional flat pannel of 3rd party but with this distance 13,5dB yagi I think are sufficient. Does the "distance" settings on root bridge have impact on the signal sterngth?
    One more question, at the moment the 2 connected offices are in the same subnet so to speak in the same broadcast domain. On one site (non-root bridge)  they have up to 150 client connections to the servers on the other site (root bridge) but with 20kbps per station making it roughly 3Mbps total bandwidth needed. When they connect all at the same time, our client say the wireless link go. I really don't believe that becasue on the wireless readings we get betwenn 18 and 24Mbps so it should be way more than enough. Do you think by putting both sites in different VLANs would help a little bit so the local traffic would not need to be broadcasted over the wireless link back and forward? Can you shed on that a little bit of your experience? I suspect they have something to do with the switching on local site because when I was pinging the non-root bridge from the local site but connected to a different switch then is connected the Cisco bridge, I got funny reposnses, between 5 and 40ms over ethernet with 10 connections to the remote site over the wireless link but when we pingged the same CIsco bridge from the local site but connecte to the same switch as the Cisco bridge the responses were 1ms. It makes me think that they have some broadcast storming on the local site and that also propagates the wireless link...

  • Satellite P100-347: Blue Leds - Can they be disabled/switched off?

    I have read several topics in the forum about the P100 Harman/Kardon Speaker Blue LEDs/lights. None have expressed a final answer about how to switch off the LEDs.
    I was wondering if any new update on this issue has occured. The last forum post about it was in February. Is it possible to switch off these annoying lights in the newer Satellite models? I would be willing to disconnect the leads if its an easy job.
    My laptop is the Satellite P100-347 (SPA6E)
    Thanks a lot

    Hi Dan
    Did you use the forum Advanced search???
    I dont think so!!!
    I used it and found several threads about this theme.
    I searched in the Satellite P section for blue light and find these postings:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=16008&messageID=58569
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19701&messageID=72256
    So why to post something which was already discussed here in the forum?!

  • The blue LED power button light has gone out

    The blue LED power button light has gone out.    Model a4316f.   How do I replace?

    Hello @deargle,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how the power button LED on your desktop computer has gone out, and I would be happy to guide you towards a resolution!
    Since there are no available replacement options on HP Parts Surfer for replacing the LED light, I recommend contacting our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Solid Blue LED Indicator

    My Torch is displaying a solid blue LED indicator. My keyboard is not illuminating but I'm sure that's due to the light sensor being close to the LED. I've seen various items listed for this light; I do not have Bluetooth enabled; I do not have access to a music server. Between this and the freeze-ups after I unlock the device, I'm not happy here.

    a very frustrating problem.
    i dont  claim to have a solution but i'll tell you what happened to mine!
    first of all before the solid blue light came on i'd accidentally splashed the handset with water
    (nothing major, thought nothing of it, wiped it off and carried on.)
    the next time i looked at the handset the solid blue had appeared. gah.
    i spent several hours looking at web search results, tried all that hard reset and bluetooth on/off garb.
    no joy. got mad! dont have any trusted permissions for apps ive downloaded, dont have a music thing or any other bluetooth accesories either.
    so i was practically tearing my hair out and going up the wall with rage. decided to whinge about it on my friends
    facebook wall (via facebook for blackberry.)
    having vented my spleen sufficiently i closed facebook (not logout, just red buttoned it)  
    lo and behold - the blue light went off.  success. 
    no idea why it came on, no idea why it went off. just glad its gone now!
    i dont know if this will work for others but it would be interesting to know if anyone else had got their handset wet?
    wondering if it may literally be a case of waiting for it to dry out..
    its an ongoing mystery!
    good luck to all who suffer at the mercy of this blue demon..

  • X79A-GD45 Plus Blue LED's?

    So I've had this motherboard for quite some time now, and I was wonder if there was any way to turn off the blue led's?

    Yes, some of them you can. Look in the BIOS for the setting for mainboard LED's and 'disable' it.

  • MSI Z87 GD65 "Dragon" Motherboard - How to turn OFF blue LED?

    Hi guys, recently purchased this motherboard for my i7 4770k and I LOVE IT. BIOS works great and the computer boots up flawless with no errors.
    My question is, the motherboard has a red theme to it, and my case is red/black as-well.
    However, the mobo has a BLUE LED on it, when it is powered on. I Looked in BIOS but could not find a way to turn it off.
    Is there any way to turn this blue LED off? It kind of ruins the red/black theme! :(
    Please let me know,
    Thank you!

    Nope , the option is NOT under hardware monitor
    There is a "Power LED" option under the "advanced" setting, but it doesn't affect the "blue LED" for the BIOS , only the purple-redish LED for "audio" on the motherboard.....

  • CMOS button. blue LED keep on

    look this
    help !!! blue LED CMOS button, keep on after PC shutdown.
    I've tried clear cmos nothing change,
    how to fix this ???
    ========================
    MSI Gaming 9 ac.
    i7 4790K
    2x 4gb ram
    GTX 780ti
    PSU seasonic P760 platinum

    seems that you only got 2 choice left, one is to turn off your Power supply directly,
    second is to try to go to bios setup and set the Onboard Function LED control to Disabled

Maybe you are looking for