Blue screen error code. Please help.
late 2008 version.
Recently my school reinstalled windows 7 but after he did that, there was some blue screen error code which only appears while running on windows and everything is fine on the mac side.
He reinstalled windows 7 again but the blue screen error code started again. He said that it could be that my apple disc is not original which caused the error code, however last year they were able to installed windows 7 without any issue. He also said that it could be the hard drive problem.
Another problem I have is that while on windows the hard disk drives doesn't show the mac too.
Please help! Much appreciated if any of you can help me out.
Unless you run a VM such as Parallels, you're not going to be able to see your Mac disk using Boot Camp. If I were you, I'd see about getting Parallels Desktop and installing Windows 7 on it. You can then inter-operate with both systems.
Clinton
Similar Messages
-
hey all , my apple ipad 16gb wifi only is showing a blue screen !! please help ! how do i fix this . what does it mean ? thanks in advance .
Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.
-
HELP ME PLEASE !! Blue screen error code 9c IBM T43 1872
Hello everybody,
I need your help please !!
I have an laptop T43 1872. When i installed windows xp pro sp2, after 10 minutes, my laptop show a blue screen "machine_check_exception" , code error : 0,00000009c.
After search in web, the solution is to update my bios. I do it but my problem is always here.
Have you one solution for me ?
Thanks you a lot of
Mimijtake a look at this http://www.errordecoder.com/stop-error-codes/STOP-0x0000009C.html
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC -
Blue screen error code B88B514A
hi
i recently did an update and now the printer wont work
i get a blue screen that flashes really quickly then i think the error code is B88B514A
any help please ive only had it less than a monthHello @hobi12,
Welcome to the HP Support Forums! I see you recently did an update to your HP Envy 120 and now the front panel is blue with an error code 'B88B514A'.
I would like you to start troubleshooting here: 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error M...
'Because there are many variations of these 'Problem with Printhead,' 'Printer Failure,' or 'Ink System Failure' error messages and alphanumeric codes, we have provided a few guided steps to get you to the right troubleshooting document for your error. Select the statement that best describes your situation.'
I hope this helps, if you are still getting the error message, call our technical support at 800-474-6836 as it may be the printers hardware and you would still be covered by factory warranty. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
BIOS Update causes Blue Screen of Death - PLEASE HELP
PLEASE HELP!!
After recently reformatting a Lenovo 3000 N200 (XP SP3), I downloaded the Lenovo Care (or whatever it's called), which downloaded a whole lot of updates, drivers....
The last thing that was downloaded was a BIOS Update. Before flashing and reprogramming the BIOS, the program created a backup of the old BIOS.
Since the BIOS Update, I can no longer turn on the laptop without the BSOD (Blue Screen of Death). When I try to turn it on, it shows the Lenovo startup screen, then goes to the "previous attempt was interrupted" menu (the menu where you can choose 'Safe Mode'...), and no matter which option I choose, it starts to show the XP startup screen (with the progress bar), for 1/2 a second, then displays the BSOD for 1/2 a second (too fast too even read what it says or even get the error code).
What can I do to remedy the situation? Can I somehow access the backup of the old BIOS to restore it? Or is there something else I can do?
BTW, When I click F1 on the Lenovo startup screen (to get into the BIOS settings) it shows the BIOS version to be "68ET35WW (V3.03) - which is apparently the latest version for that laptop
Message Edited by yksnirk on 01-20-2009 08:15 AM
Message Edited by yksnirk on 01-20-2009 08:15 AMIf you have restored the device as new and tested it without using your backup and it is still malfunctioning, then you need to make an appointment with the Genius Bar of the nearest Apple Store or Authorized Apple Service provider, depending on your location, and have the hardware checked.
-
Qosmio X775 blue screen error Code 116 with OpenGL and video programs
After updating windows I found that I was getting blue screen messages when I tried to use OpenGL in Photoshop or when I open Adobe After Effects and other video programs.
The mini dump message is:
==================================================
Dump File : 072512-32151-01.dmp
Crash Time : 7/25/2012 8:46:34 PM
Bug Check String :
Bug Check Code : 0x00000116
Parameter 1 : fffffa80`0b507010
Parameter 2 : fffff880`0f39f4d4
Parameter 3 : 00000000`00000000
Parameter 4 : 00000000`00000002
Caused By Driver : nvlddmkm.sys
Caused By Address : nvlddmkm.sys+19e4d4
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+7f1c0
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\windows\Minidump\072512-32151-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7601
Dump File Size : 370,384
==================================================
I've looked this up with no result. Can anyone help. (Note: I am fairly literate but not a computer geek.)
Sheilamacd
SheilamacdHi there,
Sorry for bringing this thread back up but I have the exact same laptop and the exact same problem. I believe I've had this problem since this thread has been posted, but have just come across this thread. I've done a factory reset through the built in recovery options but I still come across these errors (BSODs and graphical glitches, also from nvlddmkm.sys and 0x116 errors). Whenever I run a Furmark GPU stress test, the FPS is fine until I hear the fan turn on, which the frames then drop extremely low (5 fps or so). Once temperature of the GPU drops a bit and the fans turn off, the FPS rises again back to normal. This continues for awhile (dropping and going back up) until it crashes with an OpenGL error. I also did a Memtest to check my RAM, but it all checked out ok. At first I ordered a recovery disc because the recovery partition was not working for some reason (kept crashing/freezing). I tried it again recently and the recovery went through. I'm not quite sure if the built in recovery and the recovery media discs are different, but I'm hoping it will make a difference when it gets here. If the recovery disc does however not work, should I just assume its a hardware issue and send it to an ASP for repair? Extremely hesitant because of the high cost...Any help would be much appreciated. Been bothered by this issue for a month... -
Blue Screen Of Death (Please help) Locale ID: 1033
So this computer is only 1 year old, I got this computer from cyberpower and the computer has been alright until out of no where i have been getting this blue screen
This is the information it gives me about it, can someone please help me resolve this
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF88011184DBB
BCP3: FFFFF88003E72228
BCP4: FFFFF88003E71A80
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\061014-20342-01.dmp
C:\Users\Toktz1\AppData\Local\Temp\WER-31746-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txtHi,
In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc.
If you don't know where .DMP files are located, here's how to get to them:
1. Navigate to the %systemroot%\Minidump folder.
2. Copy any and all DMP files in the Minidump folder to your Desktop and then zip up these files.
3. Upload the zip containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply. Preferred sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers, download managers, etc.
4 (optional): The type of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel-Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference
between Small Memory Dumps and Kernel-Dumps in the simplest definition is a Kernel-Dump contains
much more information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel-Dump is the best
choice. Do note that Kernel-Dumps are much larger in size due to containing much more info, which is why I mentioned upload speed, etc.
If you are going to use Onedrive but don't know how to upload to it, please visit the following:
Upload photos and files to Onedrive.
After doing that, to learn how to share the link to the file if you are unaware, please visit the following link -
Share files and folders and change permissions and view 'Get a link'.
Please note that any "cleaner" programs such as TuneUpUtilities, CCleaner, etc, by default will delete .DMP files upon use. With this said, if you've run such software, you will need to allow the system to crash once again to generate a crash dump.
If your computer is not generating .DMP files, please do the following:
1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for all
drives'.
3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the system
log'.
Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
4. Double check that the WERS is ENABLED:
Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than
Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.
If you cannot get into normal mode to do any of this, please do this via Safe Mode.
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama -
Blue Screen of Death Please Help!!!
Hi Everyone. I'm having some major issues with my iPhone 5s (16GB updated to iOS 8.1.1). Literally every time I so much as look at the phone it restarts and gives me the Blue Screen of Death. This happens randomly. At one time it was just a minor annoyance (as it only happen occasionally), but now it is unbearable. My phone is on a constant cycle of Black Screen, Apple Screen, and then Blue Screen.
Before you ask, yes I have reset all of the settings, yes I have tried holding down the home button and the lock button, and yes I have tried wiping my entire phone (in the past) to get rid of this problem.
Please help! Nothing I have done or tried to do is fixing this problem.
Thank you so much in advanced.If you have restored the device as new and tested it without using your backup and it is still malfunctioning, then you need to make an appointment with the Genius Bar of the nearest Apple Store or Authorized Apple Service provider, depending on your location, and have the hardware checked.
-
Blue screen of death - please help me!
Please help! So far Google search results have been unhelpful...
My iPhone 5c blue screened this evening while I was browsing through Facebook. Unlike most of the blue screen search results on Google, my phone did not reboot after this, the screen just turned black. Every attempt to reboot it by holding down both home and power button have resulted in the Apple logo appearing, it vibrating a few times, going to lock screen and then blue screening again within seconds.
I've tried a forced system restore via iTunes, the phone blue screened again while doing this. I'm unsure of what to do. Is this a common problem?There is a step somewhere around pages 11-13 in the bootcamp install guide that mentions reformatting the partition. Did you do that?
If you have any non-standard/non-Apple hardware attached, disconnect it before installing windows. -
TS3694 please someone help me ive got a iphone 3G WITH 1015 ERROR CODE PLEASE HELP
can someone help me i brought a secound hand iphone 3g model numberA1241.
used it on itunes update and it got a errror code 1015 come up had to take it to the shop to be fixed got told it would be alright to use on iphones now it was working ok untill my partner done what i did and pushed update and once again 1015 error code back ive tryed to fix it myself But I NEED HELP PLEASE !!!!!!!!!!!!
I JUST AINT GOT ANY MONEY FOR SHOP TO DO IT
SO PLEASE CAN ANYONE HELP ME PLEASE SOMEONE GET BACK TO ME YOU WOULD MAKE ME VERY HAPPY MANError 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
-
error code when restoring now stuck on restore mode
Your phone has been jailbroken. You can't get help here. Discussing jailbroken devices is a violation of the Terms of Use.
-
Wireless stopped working after blue screen crash. Please help
Hi am desperate
I was working on vista doing some graphic job when suddenly the screen turned blue with some message and a count down like thing. After a while vista rebooted fine but since then my wireless is not working anymore.
I checked my device manager and everything is fine over there, driver installed correctly. But when i try to click on the power on button nothing happens and its not connecting or detecting to any wireless network.
Then i try to uninstall the device from device manager, as soon as the uninstallation was done, vista installed it back. I checked the power button again and it worked this time. The window opened up and i could see the avaible networks to connect to. As soon as i clicked on any one of them. Some service crashed and i got this
Problem signature:
Problem Event Name: APPCRASH
Application Name: svchost.exe_PcaSvc
Application Version: 6.0.6000.16386
Application Timestamp: 4549adc4
Fault Module Name: StackHash_883e
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Code: c0000005
Exception Offset: 77e48a32
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 2057
Additional Information 1: 883e
Additional Information 2: 949a7a0b47e310a64b136de1ad2bba33
Additional Information 3: 3ead
Additional Information 4: eb840ca556c23fbe49b8bbf96ad42865
What i noticed is that the MAC address of the card was something different before the crash and after the crash its just FF:FF:FF.....
The card is physically connected to the PC i my guess is that is fine.
Can anyone help please?
Here is a preview of my desktop. Hope someone can help
Now when i click on the mobility center in the control panel i get the following error
Problem signature:
Problem Event Name: APPCRASH
Application Name: mblctr.exe
Application Version: 6.0.6001.18000
Application Timestamp: 47919f54
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6001.18000
Fault Module Timestamp: 4791a7a6
Exception Code: c000007b
Exception Offset: 00009cac
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 2057
Additional Information 1: 9d13
Additional Information 2: 1abee00edb3fc1158f9ad6f44f0f6be8
Additional Information 3: 9d13
Additional Information 4: 1abee00edb3fc1158f9ad6f44f0f6be8
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409The laptop came with software to make a Recovery Disc set. If you did not make it you can order a set from HP. Usually around $16 for Windows 7 media. https://h10025.www1.hp.com/ewfrf/wc/mediaOrder?cc=us&lc=en&productOid=5112032&softwareitem=659152-001 Some are reporting trouble using the ordering process. If you can't order there fill out the form on this page for more help. https://support.hp.com/us-en/contact-hp/product/HP-Pavilion-g6-1b00-Notebook-PC-series/5082228/model/5112032
-
Blue screen error code 0x00000050 and 0x0000000a on T430 (234234U)
Hi,
I have a new T430 and it crashes with a bluescreen 0x00000050 and 0x0000000a, I have been having this issue intermittently.
I've already checked the memory and hard drives with the: linux-bootable-cd-16.iso, with no problems.
I tried to use the recovery tool to restome my system but I keep having the same errors.
I used the software "BlueScreenView" to read the .dmp file, it says that it caused by address "ntoskrnl.exe + 7f1c0".
any solution?, thanksmarcelop5,
Here is some additional info on ntoskrnl.exe + 7f1c0 from Microsoft, Server Forums and another Microsoft forum.
Be AWESOME Everyday!
Donate KUDOS and Click "Accepted Solution"
Did someone help you today?
Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"
This will help the rest of the Community with similar issues identify the verified solution and benefit from it. -
Error code Please help.
When I am creating a new CSS style sheet file I get a Java Script error while loading Spry Data Set.htm:
At line 204 of fileC:\ProgramFiles(x86)\Adobe\AdobeDreamweaverCS5\Configuration\Commands\InsertDiv.js"; out of memory
Can anyone tell me what I can do to fix this. I am unable to create the website correctly and I need to get this done right away.What is the spec of your machine?
Operating System - Windows 7/Windows 8;
Memory: 4GB, 8GB
DW version CS5, CS 5.5, CS6;
Also have you tried creating a blank file in Notepad and saving it in your site's CSS folder and then attaching it to your page/template?
Hope this gives you something to think about. -
Blue screen error 1e on windows server 2008 r2
Hi Friends,
Please help me, I am facing with blue screen error 1e, Kindly help me to fix this issue,
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.274.10
Locale ID: 1033
Additional information about the problem:
BCCode: 1e
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 274_3
Files that help describe the problem:
C:\Windows\Minidump\112914-22651-01.dmp
C:\Users\Administrator\AppData\Local\Temp\WER-73289-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txtHi ramesh84,
Please updating to latest BIOS, latest drivers, particularly to NIC driver(Base on my experience)and
monitor the server for the next reoccurrence of the issue. If you install any new application or install any update please uninstall them first for the troubleshooting. Because we need to analyze the crash dump file to narrow down the root cause of the issue.
Unfortunately, it is not effective for us to debug the crash dump file here in the forum. I would like to suggest that you contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
Hope the issue will be resolved soon.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Maybe you are looking for
-
Hi, I want to hide a column when i select Hide option from a popup menu and again bring it back when i select show option again from the popup menu. How to get this done?
-
Eventually denied permission to write in home directory
Hello, My wife is using a Mid-2007, 2.4GHz Intel Core 2 Duo iMac (iMac7,1) with 6GB RAM and more than 1TB of free available HD space. She is running Mountain Lion (10.8.3) and has administrator privileges. After she has been using the computer for a
-
Export error in Oracle Applications 11.03
I am having trouble exporting fields out of Oracle Applications. I get an error saying failed command. Any ideas on how to fix? This wouldn't be related to IE version or service pack or OS would it??? Some workstations can while others cannot.
-
PHP 5 and ORacle 9i Client?
We would like to install PHP 5 on an windows 2003 and IIS 6 machine. Currently we have the oracle 9i client installed to access our 9i databases. Do we have to install the 10G client? Can anyone tell us how this will affect the 9i client install? Tha
-
Post Author: fahadayub CA Forum: Crystal Reports The Crystal Report 2008 Features page shows a sample of interactive report viewing where the report is changed between a chart, grid and data view based on a report parameter i.e. multiple views on the