Bluetooth and HTTP

Hello,
I'm very confused of how a middlet communicates and exchanges data.
Let's say that there is bluetooth connection established between a middlet and my laptop.
Can I use the HTTP protocol to send and get data? If I can then how can I know that I'm using
the bluetooth connection and not GPRS.
Thanks in advance

No, you cannot communicate via HTTP. You simply get a stream connection, identical to something like a socket.

Similar Messages

TS3280 How can i enable both paired bluetooth and ios keyboard input at the same time?

How can i enable both paired bluetooth and ios keyboard input at the same time?
This is needed for the app im working on. Need some user input via keypad as well as scanner input via a paired bluetooth scanner.

You probably should not be using a keyboard bluetooth profile for a scanner, I am not a developer for apple so do not know the location for you to find out the correct profile you should be using for an input device that is not a keyboard. Sorry,
I am sure if you navigate the apple developer site you will probaly finmd what you're looking for.
https://developer.apple.com

Bluetooth and GT750M is not working after suspending to RAM.

Hello! I am yet another lucky owner of laptop with optimus Intel+nVidia technology. I had really frustrating issue with Bumblebee because my nvidia just randomly refused to change power state in the past, luckly after a few months someone added workaround to the Bumblebee's troubleshooting section on ArchWiki and it worked flawlessly for a while. But now, most likely because of some kernel updates, I'm experiencing similar issue with both Bluetooth and nvidia card but this time only after suspending to RAM.
% optirun glxgears
[12125.501131] [ERROR]Cannot access secondary GPU - error: Could not enable discrete graphics card
[12125.501173] [ERROR]Aborting because fallback start is disabled.
% bluetooth
bluetooth = on
% bluetoothctl
[bluetooth]# devices
[bluetooth]# power on
No default controller available
[bluetooth]#
Some relevant outputs:
% dmesg | grep -i bluetooth
[ 5.827610] Bluetooth: Core ver 2.19
[ 5.827633] Bluetooth: HCI device and connection manager initialized
[ 5.827641] Bluetooth: HCI socket layer initialized
[ 5.827643] Bluetooth: L2CAP socket layer initialized
[ 5.827649] Bluetooth: SCO socket layer initialized
[ 9.006994] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 9.007003] Bluetooth: BNEP socket layer initialized
[10940.998460] Bluetooth: Error in firmware loading err = -110,len = 448, size = 4096
[10940.998468] Bluetooth: Loading patch file failed
[10940.851853] wlp4s0: associated
[10940.998460] Bluetooth: Error in firmware loading err = -110,len = 448, size = 4096
[10940.998468] Bluetooth: Loading patch file failed
[10940.998475] ath3k: probe of 1-4:1.0 failed with error -110
[11094.380198] mce: [Hardware Error]: Machine check events logged
dmesg messages after the "optirun glxgears":
[12118.593906] bbswitch: enabling discrete graphics
[12118.604058] pci 0000:01:00.0: Refused to change power state, currently in D3
Any ideas what's going on? Thank you!

ACTIVATING FACETIME AND IMESSAGES
Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS. Check with your carrier to see if your plan supports sending of international SMS messages. If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)). Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation. If that does not fix things read the following articles:
http://support.apple.com/kb/TS4268
http://support.apple.com/kb/ts3367

QOSMIO X500-12D - webcam, bluetooth and fingerprint disconnection issues

Hello,
I still got no solution for this problem. I already did a clean install of Win 7 x64 but still no luck. The devices still keeping disconnecting and I have to reboot to resolve. (this is bad since I normaly using a bluetooth keyboard)
Further this Problem seems not only to occour if system goes 'idle' since my bluetooth keyboard was disconnected during typing. (whatever 'idle' means).
Sometimes I was able to recover at least the Bluetooth connection by turn it off and on again within the Toshiba Bluetooth Stack, sometimes with the HW switch (which also deactivates the WLAN) and sometimes only a reboot helped.
It seems that all three devices (Bluetooth, Webcam, Fingerprintsensor) are connected to the same integrated USB root hub within the system.
After my last test, everything was working before I left the system during a nightly copy operation of a 'few' gig, I come back after ~4 hours and all devices were disconnected (HW not installed) --> I checked in the device manager (see [http://support.microsoft.com/kb/241257] to show devices which are not connected and in the computermanagement right click device manager -> View -> Show hidden devices) all 3 devices shown as 'not connected'.
I already opened a case at support and they told me to update the bios. (when I opened the call the tests were done with the latest bios available)
Nevertheless, I also had a small talk with the support and they told me to restore the system from the recovery DVD's and check if the problem persists after the restore of the 'certified' image (drivers and so on). If it still persists they will do a HW repair. (change mainboard or whatever)
*AGAIN... is there still NO solution out there? I have searched the web and found many people with the same issues. (X500 owners and others)*
_What did i tried:_
- different hotfixes as described at [http://aps2.toshiba-tro.de/kb0/TSB0402UQ0001R01.htm] and [http://aps2.toshiba-tro.de/kb0/FAQ0402UC0001R01.htm] ([http://support.microsoft.com/kb/978258])
- right now I am using [http://support.microsoft.com/kb/981214] since the build numbers of the files are higher than in the hotfix mentioned above and therefor this hotfix should also resolve the problem described in [http://support.microsoft.com/kb/978258]. (and I am using an USB audio device)
- I also tried to disable different things of the power management (e.g. disabled usb selective suspending)
Modell QOSMIO X500-12D
Partnumber PQX33E-030009GR
BS-Version Microsoft Windows 7 Ultimate 6.1.7600 x64
BIOS-Version V2.60
CPU Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz
RAM 4096MB RAM {color:#ff0000}(<- Toshiba Tools reports wrong RAM size, 6GB installed)
{color}HD Size 499,685,253,120 [Byte] 465.368 [GB]
Video NVIDIA GeForce GTS 360M Version=8.17.12.5896
Screen Resolution 1920 x 1080

HI,
It seems that I have found a solution for this problem.
If you have read my first post exactly you should have read that i already disabled the selective USB suspend.
I have connected 2 external USB hubs which are powered by an AC/DC adapter. On this USB hubs I have connected varios USB devices...7.1 USB Headset, external HDD's, PDA, Card Reader, PKI device, USB Sticks, etc.
Nevertheless, I also disabled the the Powermanagement settings on all devices which were involved and where it is possible.
To do this goto the device manager --> right click --> View --> show devices by connection.
Now locate your bluetooth, webcam and fingerprint device. (be carefull names might be different because of different drivers!)
Should be under ACPI x64-based PC --> PCI-Bus --> Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller --> {color:#ff0000}*USB-Root-Hub*{color} --> {color:#ff0000}*Generic USB Hub*{color} -->
There you should find all integrated devices which are troublemaker:
* {color:#ff0000}*AuthenTec Inc. AES2550*{color}
* Bluetooth USB Controller-7 from TOSHIBA
* USB-Webcam
Now double click every device in this 'chain' and locate the powermanagement TAB. (Please note that NOT all devices in this chain do have a powermanagement tab and cannot be configured....that's ok)
On the power management tab uncheck 'Allow the computer to turn off this device to save power' and click OK.
I have done this for all devices which are {color:#ff0000}*marked red in the chain above*{color}. (_I also deactivated the USB selective suspend in the used powermanagement plan!)_
It seems to work now....until now no more bluetooth problem or devices which were gone. It might be that it is enough to disable the Power saving settings only on one or two devices, but right now i had no time to test.
Please also keep in mind that I am using the latest Intel Chipset driver, latest Toshiba drivers and installed the Microsoft hotfixes described in my first post in this thread!
It would be very nice if some people can try and post here if it works!
Regards

Expert help needed to connect iPhone / iPad using BlueTooth and Wi-Fi

We need expert help to connect iPhone / iPad using BlueTooth and Wi-Fi. If you have worked with Apple MFi Program [http://developer.apple.com/programs/mfi], or have expertise/experience in this, please contact me. Thanks! Kevin.

Hi there.
I connected to my livebox after about three attempts. You have to pair the livebox by pressing either the number one or two that is on the box. When it is in pair mode it stays that way for ten minutes so it gives you chance to try your wep code that is on the bottom of the box a few times. I can't remember which one was successful but i did try the letters in uppercase and lower and one of them seemed to connect.
Welcome to discussions by the way.
Hope this helps JB

How to completely turn off Bluetooth and Wireless

Hey everybody,
I'm running Windows XP SP3 via Boot Camp and I was wondering if anyone can assist me in how to completely turn off Bluetooth and Wireless connectivity so that I can reserve as much batter life while being in class taking notes without a plug-in source, but not uninstall. I know there is a Bluetooth control panel and I disabled it there but under "connect to" its still remains there. Basically I want to have the Bluetooth and Wireless turned off completely when I startup and still have the icons shown in the taskbar to let me know that they are still there.
Thanks!

Joergen Thomson, I can see that you have the same thoughts like I do, I wish they could release a software that is stable and better then this.
I dont have the energi or time to report all flaus back to cisco, this product have taking to much of my time and frustration already. Thank you so much for all the time you spend to try get this product stable and hopefully a good product.
I have a costumer that have a webservice that is IP restricted, For now I have to define more then 93 policys openening for the same service because this doesnt handle address list and groups. And all the times I had to set it back to factory default becasue of HTTP Admin server stopped, VPN Problem, Firmware Upgrades, "Packet Loss" and so on takes alot of time becasue I need to reconfig policies back.
For now to they release a firmware is stable I have take this piece off the network and put the back a old Fortinet 60 box.

I want to connect my bluetooth and say now discoverable what can i do please...

I want to connect my bluetooth and say now discoverable what can i do please

What do you want to connect to? iPhone BlueTooth can not connect to a computer, except for tethering. See: http://support.apple.com/kb/HT3647

I was trying to pair my iPhone 5 with my car's bluetooth and it asked me for a 4 digit code, what is the 4 digit paring code?

I was trying to pair my iPhone 5 with my car's bluetooth and it asked me for a 4 digit code, what is the 4 digit paring code for the iPhone 5?

The code must be mentioned in the manual for the car read http://support.apple.com/kb/ht1664 it may help

Any way to connect my palm to my laptop over bluetooth and have internet in my palmcentro

sorry but I have little knowledge on cell phones, I have a Palm Centro and I wonder if there's any way to connect my palm to my laptop over bluetooth and have internet in my palmcentro, I had sprint in usa but now I'm Ecuador and I'm ussing another company called alegroo and the internet is very expensive.
please can someone help me
Post relates to: Centro (Sprint)
Post relates to: Centro (Sprint)

Yes, this can be done with a purchase of "Softick PPP" found here:
http://www.softick.com/ppp/
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

HT204291 The Apple sales rep told me I could use Airplay Mirroring between my iPad2 and AppleTV via bluetooth and I didn't need wifi. Is that true?

The Apple sales rep told me I could use Airplay Mirroring between my iPad2 and AppleTV 2 via bluetooth and I didn't need wifi. Is that true?

No. AirPlay is via Wi-Fi.
http://support.apple.com/kb/HT4437
http://support.apple.com/kb/HT5209

I have iphone 6 plus. When i am connecting it to my Hyundai Grand i10 using Bluetooth and trying to call someone, unable to get the ringing sound. Sound comes only when the person receives a call.

I have iphone 6 plus (IOS 8.0.2). When i am connecting it to my Hyundai Grand i10 using Bluetooth and trying to call someone, unable to get the ringing sound. Sound comes only when the person receives a call.

Hello Mogulman46,
So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off.
Use Do Not Disturb on your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5463
Regards,
-Norm G.

While listening to music in my car, I don't have the option to choose between bluetooth and headphones anymore. Why?

On IOS 6 and earlyer, I use to be able to choose between the bluetooth or the headphone jack. Now, I can only play music true my bluetooth and I can't pause the music. Anybody has a solution?

Basic Troubleshooting Steps when all else fails
- Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear. (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
- Relaunch the App and try again.
- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.

Bluetooth and Airport have disappeared on my Imac G5 20"

So it just disappeared one day, and I haven't seen it since. It happened a while back, but I'd like to sell the computer and it would be better if I had the Bluetooth and Airport back. From what I can tell from the forums, it's a software issue. I've tried some of the remedies people have suggested (pulling the power cord, etc... clear the PRAM, ditch the bluetooth.plist, plus probably a few others), but to no avail. Any other suggestions, or is it a lost cause? It's a 2.0 HHz PowerPC G5 with 1 GB RAM; 10.5.6

Option 1
Restart the computer while holding down the Option key. This will tell the computer to look for bootable drives. If it finds your normal startup disk, select let, then click the right pointing arrow to boot up the computer. Now open up System Preferences> System> and select your normal Startup OS as the default startup disk.
Option 2
Reset your PRAM. Press and hold down the Command Option P R keys while starting your computer. You will hear the startup chime. continue holding down those keys until you hear the startup chime a second time. Release the keys. If the computer restarts, you will need to reset your Date and Time. It might be time to replace your PRAM battery. The G5 iMacs require a 3 volt CR2032 lithium watch/camera battery like below:
http://eshop.macsales.com/item/NewerTech/CR2032/
You can find these batteries at Walmart, Kmart, Target, most local drugstore chains, for between $3-$5, or at Radio Shack for $12-$20.
If you have any G5 iMac model EXCEPT the iSight version, you can probably do the battery install yourself. Watch this video on upgrading your iMac's RAM to show you how to remove the back of your iMac, if you don't already know how:
http://eshop.macsales.com/installvideos/imac_g5_mem_m/
While you have the back off, use a can of compressed air to blow the dust out the vents at the bottom of the iMac, the fans, and anywhere else you can. Also inspect the 28-30 capacitors on the logic board. Look for dark spots, if they look puffy or swollen, or leaks.
Option 3
Reset the SMC by removing all cables (USB, Firewire, Ethernet, Modem, Power cord) from the back of your computer. Let it sit for one minute. Press and hold the power on button on the back of the iMac while plugging in the power cord. Release the power on button. Count to five, the press the power on button again.
Option 4
Place your original, came with the iMac when purchased install disk, into the slot on the iMac, press and hold the C key while pressing the power on button on the back of the computer. (If you have upgraded your OS from when you purchased your iMac, example your iMac came with OS 10.3 installed, and you're now using OS 10.5, then use the OS 10.5 Retail Install disk that you had used to upgrade your OS instead of the original, came with the iMac disk.)
Continue holding the C key until you see the OS starting to load. DO NOT do an OS installation. At the top Menu bar, select Utilities or Utility, and pull down to Disk Utility. On the left side of the window that opens,select your normal OS drive. Click First Aid at the top middle of the window if it isn't already selected. Click Repair Disk from the lower right area of the window. When that is done, click Repair Permissions to the left of the Repair Disk button you clicked earlier.
When that is done, quit Disk Utility. From the top Menu bar (I think its under Utilities) select the Start Up Manager, and choose your normal boot volume as the startup disk. Restart the computer. If successful, and you've rebooted from your normal startup disk, eject the install DVD/CD, and you're good to go.
Good luck.

S10-3t bluetooth and wireless not working with windows 8

S10-3t bluetooth and wireless not working with windows 8. I tried everything but doesn't work at all. I don't know where to find the new drivers that are comatible with windows 8 ???!!! please help me to solve this problem because i tried everything....

Do you still have your windows7 install files ?
( installation image is usually in LENOVO_PART OKRBackup/Factory ) ? I lost them :\
if yes I fear you have to enable it in win7 and then use it in win8
http://rzr.online.fr/q/lenovo# g470 s103t (Please Contact me if your s10-3T is booting win7 or support bluetooth, 3g)
Lenovo S10-3t | Model Name : 0651 | Mfg Date: 2010/06/08
Lenovo G470 | Model Name : 20078 | M fg Date: 11/03/23 | BIOS: 40CN23WW(V2.09) 06/20/2011 | CPU: i5-2410M | Linux version 3.3.4lenovog470+ (root@lap) (gcc version 4.6.3 (Debian 4.6.3-4) ) #8 SMP Tue May 1 10:23:48 CEST 2012
OS:GNU/Linux/Debian

TS1559 My iPod Touch 3rd Gen I think (Doesn't have a camera), bluetooth and wi-fi grayed

My iPod Touch's Bluetooth and Wi-fi are now grayed out, I have tried everything to fix it. It happened right after I upgraded it to the new iOS 5.1.1, could this be an effect caused by the new iOS firmware? It has not been dropped, thrown, broken, wet, etc. Is this an affect the new firmware had on it? Will it be fixed with iOS 6 or is it permanent?

It's clear it isn't under warranty so I would check the link above first. Also I'm sorry to say you will not be running ios6 on that device anytime soon as it is not supported. Check the very bottom of http://www.apple.com/ios/ios6/ sorry I couldn't make it a link I'm on an iPad writing this.

Bluetooth and HTTP

Similar Messages

Maybe you are looking for