Bluetooth connectivity for PXIe-1071, PXIe-8133

Hi, There are about 24 numbers of NI PXIe-1071 chassis with PXIe-8133 controllers in our lab. I would like to interface a Bluetooth device (EEG and ECG monitors) with the DAQ. The DAQs are running Windows 7 and LabVIEW.
How would you suggest I connect the Bluetooth devices to the DAQs?
If I buy Bluetooth dongles that fit via the USB is that a good solution?
Thanks.
Philip

Hi PKP,
Since your controllers are running Windows 7, they function just as a normal computer would; therefore the USB ports would behave just as a desktop would. You could load the drivers onto the controller and collect data from the bluetooth device that way. Do you have software to read the EEG and ECG signals into LabVIEW?
Best,
tannerite
Tannerite
National Instruments

Similar Messages

Letter of volatility for PXIe-1071

I'm looking for a Letter (certificate) of Volatility for the following, please:
PXIe-1071
PXIe-8135
PXIe-8234

Hey,
This is the type of request that would be better suited for an official service request via our support system. Since there was a nearly identical request submitted recently, I am going to assume that it pertains to the same incident and handle it via that channel.
Matt W.
Applications Engineer
National Instruments

Getting DataSocket for LV RT 5.0.0 installed on PXIe-1071?

Hello all,
Hopefully this is just an easy to answer question, but since I got so stuck on this I'll ask it anyway.
How do I install "DataSocket for LabVIEW Real-Time 5.0.0" (on a NI PXIe-1071 module with MAX)?
Installing software with MAX and getting it on they module is not the problem, the problem is that I can't find any setup file to download that has the specific program: "DataSocket for LabVIEW Real-Time 5.0.0".
The system we use is a:
- NI PXIe-1071
With the modules:
- NI PXIe-8100 (Embedded controller, Slot 1)
- NI PXI-7951R (FPGA with NI 5751 adapter module for flexrio, Slot 2)
- NI PXI-5402 (Function generator, Slot 3)
The software we have installed can be seen in the picture (Attachment) (And yes we also need to resolve the driver problem for the function generator in slot 3 as can be seen in the picture
All software in installed with MAX, all NI drivers have been updated in the last two days to the latest versions. A lan connection (with same subnet) connects our host computer with our NI PXIe-1071 box.
The reason we need the "DataSocket for LabVIEW Real-Time 5.0.0" is that we are creating a copy of a working existing system.
When trying to find it on the NI support pages we keep finding a page that directs to the page to instal NI LabVIEW Run-Time Engine 2012. After downloading and trying to install it we get this message: "Cannot install - NI LabVIEW Run-Time Engine 2012 f3 (higher version already installed)"
Thanks in advance,
Sander Breur
Attachments:
130301_Software_list_installed.png ‏21 KB

Finished: Found an answer.

PXIe 1071 remote power up

The PXIe 1071 chassis is located inside a panel which is normally kept closed. Every day morning at start of shift, the operator has to open the panel door and switch ON the White button in front of the controller. This is something they are not happy doing as the panel does have high voltage switchgear at the bottom level.
Earlier with PCI boards and normal Induatrial computer we could wire the Power ON / OFF button to a switch outside the panel. Whihc was in parallel with the built in power switch of the PC.
I would like to get the same functioanlity with the PXI also, as noted below :
- When the panel is powered up, the PXI also powers up and loads the WIN7 OS.
- The operator launches the application and completes testing.
- When done he quits the application, shuts down the PC.
- Powers down the panel and goes home.
I have already treid to read the manual which talks of a SW1 switch but the description is quite ambigous as to what it does :
When switch 1 of SW1 is on, the backplane controls the power supply on/off state. This allows you to circumvent the controller and turn the chassis on/off manually. When switch 1 of SW1 is on, the power supply turns on when you press the front panel power switch....
I really am not clear as to what hey are trying to say. And since the system is now with client, I need to be sure before I propose to change default settings. Trial and error will look not so good.
Raghunathan
LV2012 to Automate Hydraulic Test rigs.

Hi Ming,
I apologize for my confusion regarding the functionality of the DB9 inhibit switch versus the white power button. I must have misinterpreted the descriptions in the User Manual. It seems that the white power button can hibernate the system whereas the DB9 inhibit switch just cuts off the power. In order to properly shut it down without using the white power button you will need to first hibernate or shutdown the computer through the Windows interface, then you can use the DB9 inhibit switch to remotely cutoff the power to the chassis and later turn it back on. I am not aware of another simple 'one press button' type way to remotely hibernate the PXI controller.
Since your chassis is located in a cabinet you could run keyboard and monitor cables to the device to interface with it. Alternately, you could connect the chassis to the internet and use Remote Desktop to shut it down.
Regards,
Barron
Applications Engineering
National Instruments

PXIe-1071 maximum ram?

We have a PXIe-1071 and would like to upgrade the memory from the existing 4 GB. What is the maximum this board will support? I opened it up and found 2 SODIMM slots occupied by 2 GB. Will it take 4 GB sticks (for a total of 8 GB) or 8 GB sticks (total of 16 GB) ? The manual and NI page mentions nothing about RAM at all, but the page for the PXIe-8135 says it supports 16 GB.

If the spec say 8GB is your limit, then 8GB is your limit.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

DC Powered NI PXIe-1071

hello!
I am actually using NI PXIe-1071.The Input source is AC but my requirement is to power up my PXIe through DC Input.Can u suggest any power distribution solutions like DC-DC Converters or modules with multi voltage levels meeting the power requirements of PXIe.
Solved!
Go to Solution.

Will AC power not be avaialbe where you are using this chassis? The chasis powered by AC input as you stated. If only DC is available, you will need a DC/AC inverter to use this chassis.
Here are the Power Input specs:
Input voltage range................................. 100 to 240 VAC
Input frequency ...................................... 50/60 Hz
Input current rating................................. 4-2 A
Line regulation
3.3 V................................................ <±0.2%
5 V................................................... <±0.1%
±12 V .............................................. <±0.1%
And a link to the user manual:
http://www.ni.com/pdf/manuals/373011d.pdf
Jon F.
Applications Engineer
National Instruments

Dimensions of the 160-Pin Cable for the NI PXI-2530B

Hello,
My mechanical design team wants to know the measurements of the 160-Pin Cable for the NI PXI-2530B. It will be a while before we receive the cable we ordered. I could not find a data sheet with the measurement details; are they? Alternatively, is Figure 1 in the Installation Instructions drawn to scale?: http://www.ni.com/pdf/manuals/375656b.pdf
Thanks!
Solved!
Go to Solution.

JKSH wrote:
Hello,
My mechanical design team wants to know the measurements of the 160-Pin Cable for the NI PXI-2530B. It will be a while before we receive the cable we ordered. I could not find a data sheet with the measurement details; are they? Alternatively, is Figure 1 in the Installation Instructions drawn to scale?: http://www.ni.com/pdf/manuals/375656b.pdf
Thanks!
What dimensions are you looking for?
I'm a little surprised that the length of the cables is not included in the datasheets (I did just look!) - I thought that when I ordered cables for the older-style PXI-2530 modules in my lab that the length was specified in the part description.
If you need the dimensions of the connectors, you can do a little reverse-engineering and identify the dimensions of the various components. The connector to the module is an LFH-160. The Digikey P/N for the body of a connector is WM4099-ND. It may be difficult to find the dimensions of the backshells, however. The 4 terminal block connectors are standard 50-pin D-Subs. There are many examples out whose dimensions you can review.
Jeff
Jeffrey Zola

Documentation for programming a PXI card with VISA in LabVIEW.

Hi,
Where can I find a documentation for programming a PXI card with VISA in
LabVIEW?
Thanks.
Denys.

Dan,
Thank you for your answer, short but useful to start.
Denys.
"Dan Mondrik" a ecrit dans le message news:
[email protected]..
> Denys:
>
> Our NI-VISA documentation for PXI has been somewhat scarce. We are
> improving it in the next version. In the meantime...
>
> Call VISA Find Resources with "PXI?*INSTR" to find all PXI devices.
> Call VISA Open with a device string like "PXI::devicenum::INSTR" or
> "PXI[bus]::devicenum[::function]::INSTR". In LabVIEW, use the VISA
> class "PXI Instr", available since LV 5.0. (The generic "Instr" will
> also work but will also present GPIB and VXI options and may be too
> confusing.)
>
> The property node has all the available PXI properties such as
> BAR0-BAR5 base/s
ize/type, and also manufacturer ID and model code.
> You can use all the register based in/out/peek/poke methods, just make
> sure to use the appropriate address space for your device.
>
> Dan Mondrik
> Senior Software Engineer, NI-VISA
> National Instruments

What is the memory for a NI PXI-1010 Chassis?

What is the memory for a NI PXI-1010 Chassis?
If it does contain memory what are the sizes and types? And how can it be sanitized to bring it to an unclassified state?
Thanks, CT
Solved!
Go to Solution.

1010 is a chassis, and doesn't have memory. Memory is on the controller.

FF answer for Register ID PXI 6509

Hi All,
I am using register level programming to program my PXI 6509. I am using a chassis with a PXI 8106 controller.
I manage to initialize the device, to read the manufacturer ID and the model. But when I reads the ID Register, I always get the answer "FF". Moreover, when I configure the P0 port for output and tries to update the value of the port to 1, the outputs are not at the value 5V.
I have linked my C code (I am using CVI).
Do you have any idea why I am getting the answer "FF"? Why are the values of the outputs not changing?
Many thanks in advance for your help,
Charlotte
Charlotte F. | CLAD
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> "Du 11 octobre au 17 novembre, 2 sessions en parallèle : bien démarrer - approfondir vos connais...
Attachments:
CMD_PXI_6509_VISA.c ‏4 KB

Please see my reply here -- http://forums.ni.com/t5/Driver-Development-Kit-DDK/FF-answer-for-Register-ID-PXI-6509/m-p/1211487#M1...
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)

I just bought my first Iphone the 5S and when I turn on my bluetooth the ringtone for my text, calendar, etc. comes through my Bluetooth instead of the phone. Is there a way to have the tones use the phone while bluetooth is on?

I just bought my first Iphone the 5S and when I turn on my bluetooth the ringtone for my text, calendar, etc. comes through my Bluetooth instead of the phone. Is there a way to have the tones use the phone while bluetooth is on?

I would also like this issue addressed.
I am using a Plantronics Voyager Pro+ and when it is connected to my iPhone 4, email and text sounds are not audible through the phone. The phone just vibrates when a new text or email is received.
I don't really care if it plays through the headset, but it should at least play through the phone. I tested the headset from a BlackBerry and the alerts play fine.
Message was edited by: picardsm

Can I use a Bluetooth headphone/microphone for capture sound instead of normal iPhone mic when shooting video?

Can I use a Bluetooth headphone/microphone for capture sound instead of normal iPhone mic when shooting video?
The sound when I record video is not so good, so I'm trying to use the Bluetooth headphone/microphone to capture a person voice but not know which setting to use.

Hi Robert
Thanks for answering. I didn't know where to post other than the bluetooth forum which is relatively quiet and had no answers forthcoming.
Yes the voice isn't reaching the amp although it is registering on the input bar in the Sound System Prefs, just won't "play through" as it were. I can't see how it could be done I was just hoping someone might see something I am missing.
It seems a shame that you can't do it as iTunes on an old iBook makes a good juke box for DJ'ing and with everything becoming wireless these days it seems sensible that you could cut that one last wire.
Mike

My ipad 3 Bluetooth stops working for several seconds every few minutes

My ipad Bluetooth stops working for a few seconds every few minutes...very annoying. Any solutions?

firefox has become a somewhat of a pig. it is actually funny and i know this problem will soon be cured but.... here was this "anti-IE" thing that came out a while ago saying "we're the fastest browser in the world" and indeed they were. as a 13 year microsoft employee/veteran i was reluctant to try it, but try it i did. that was years ago. now all of a sudden here i am and for the past several months at least, firefox has been pausing every few seconds or so. it is totally annoying and has me researching the cause. i'm a techie/quite computer literate and know how to tweak and configure to get every last ounce of speed out of my system. let me tell you... firefox is no longer the fastest browser on the planet.... they have issues. why? they have a lot of code and maintaining a complex piece of software (they are finding) is not easy. BUT, the problem lies within firefox's code base... i've used the latest version of IE, safari and chrome and neither is suffering from the pausing problem.
how can you repro this problem? go to any webform (gmail, this forum, et al) and start typing... there will be an annoying pause every few seconds. while pausing, firefox pages out to disk, despite there being TONS of physical memory available... AND i have set my system to NO pagefile, yet firefox is paging...
or, go to a long webpage (e.g. ebay and set the search results to 200. then just use your cursor to scroll down the page) and you'll see the same problem.
hurry firefox... fix this annoying problem. i've been a happy and loyal FF user for at least 5 years

Ralink (Mediatek) Bluetooth PCIe Adapter for Windows 8.1 driver missing

plz send me solution ralink Bluetooth PCIe Adapter for Windows 8.1 driver missing

Hi:
This is the latest W8.1 BT driver for that card.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_139921_1

Exist BLUETOOTH headset Adapter for ipad for voice in + voice out

exist BLUETOOTH headset Adapter for ipad for voice in + voice out?

The bluetooth profiles on the iPad do not support bluetooth headsets. See:
http://support.apple.com/kb/HT3647

Bluetooth connectivi​ty for PXIe-1071, PXIe-8133

Similar Messages

Maybe you are looking for

Bluetooth connectivity for PXIe-1071, PXIe-8133