Bluetooth error while synching with Palm Treo

When I try to sync my Treo 755p with my iMac I get the following on the phone: Unable to initiate HotSync operation because the port in use by another application.
Problem must exist on the computer because I am able to sync this phone with another mac. The phone is a trusted device on the mac, the software is configured according to the documentation on the palm site. Suggested fixes for this error are to remove any other devices using the port. How do I find out what port it is using so I can remove other devices? The only other devices on this computer are a secondary monitor, Bluetooth keyboard and mouse.
Message was edited by: stevemazich
Message was edited by: stevemazich

i am having the same issue. this article has seemed to have helped a lot of people...
http://www.sharp-tools.net/archives/000365.html

Similar Messages

  • BOTH computers have suddenly stopped synching with my Treo

    Howdy - 
    I've been battling this for a week. First my home Mac, then my work Mac, within days of each other (no more than a week, maybe) stopped synching with my Treo. And I think the problem is with both computers! 
    Reason: The problem is clearly with the Transport Monitor on the Palm Desktop HotSynch. It ain't there. And before you ask, I've redownloaded the latest desktop (I already had the latest to begin with!), and restarted, several times on both computers in the past week.  The EXACT same things happen:
    - attempt at Hotsynch yields nothing on the computers. No reaction, no connection, no communication.
    -  Open Hotsynch on desktop; low and behold, Hotsynch is DISABLED - Ok; click on Enabled......and 5 seconds later, by itself, it DISABLES itself again.
    --- and gives an error message:  "Transport Monitor  could not complete your request. (16)."
    Ah-hah; that's why there's no communication with the Treo when it tries to Hotsynch, he says smugly.  I'll check the Palm Folder.......checking....well, the Transport Monitor icon is there.  Huh. 
    - simplest thing:  re-download and install latest Desktop.  Done. Restart.
    - now, that's funny; while the computer was rebooting, that same darn error message came up:   "Transport Monitor  could not complete your request. (16)." 
    This is before the computer is 100% restarted even.  It's almost like, during the restart process, when it checked (or tried to enable, I guess?) Transport Monitor, it was failing right there.
    - Try to Hotsynch - again, Palm desktop doesn't even know it's happening; no communication with the Treo.  (And no "Transport Monitor" error message, either; maybe because it doesn't know it's there?).  Nothing.
    - Go check. HotSynch; yup, same thing; Hotsynch is DISABLED - and won't allow itself to be enabled.  Go to Palm Folder, and yup, Transport Monitor appears to be right there, size 360kb.  
    If there is a problem recognizing Transport monitor, even AFTER it is ENABLED; or, replaced with a brand new transport monitor (via the Desktop download)..... then he thinks he'll: trash the Transport Monitor.  Empty the Mac trash. Restart.  Then redownload the Desktop which includes a totally pristine Transport Monitor!  
    Ok!  Restart.....
    - and the exact same thing happens.   During the Mac restart after yet another Palm Desktop download, that darn Transport Monitor error message comes up, just on the restart.  Then repeat all the testing and checking above......nothing has changed.
    AND THIS ALL HAS OCCURRED ON TWO SEPARATE MACS - one at work, one at home.  And while they don't have identical software applications (naturally), they are acting exactly the same with this Palm Desktop error, too the tee - and they failed in this within one week of each other.  
     Both MacBooks are almost identical; both less than a year old; one with 4 gig RAM, one with 2 gig ram.  Both running 10.5.7 . (Question: Is it possible for me to find out when each computer was updated to 10.5.7? Could that be the problem?? Or another of the common applications; e.g, I have the same version of Microsoft mac Office on both).
    Guys, I haven't been able to hotsynch with EITHER computer for two weeks now - which for my lifestyle is unacceptable. "Help me, Obi- wan; you're......."
    Standing by.....
    Dave
    My Treo is a 700p.  It is my third Treo, maybe my 10th Palm device in ten years.   
    Post relates to: Treo 700p (Verizon)
    Post relates to: Treo 700p (Verizon)

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
    iOS: “Not enough free space” alert when trying to sync
    http://support.apple.com/kb/ts1503
    You may need to delete iTunes on your computer and then reinstall.
    How To Completely Uninstall and Remove All Traces of iTunes
    http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
     Cheers, Tom

  • Error while interacting with scanner acrobat 9.0 and windows 7 and user profile

    After using Acrobat 9 for years I get a "Error while interacting with scanner". I have uninstalled and reinstalles the drivers for my Epson Expression 1600 scanner and still get the message. I did get it to work by changing to a differ window user account. Is there anyway correct the problem for the orginal user account.
    Thank you

    Using MSPaint works fine also,......................
    As for the question as to whether the update broke I can't honestly remember, I know it worked finr with an old HP scanner I had but as to the version of Acrobat at that time I don;'t recall
    Anyway getting fed up with this issue, I de-installed it, rebooted and re-installed.
    Ver 9.0.0 says the scanner driver is not installed or connected
    Ver 9.2.0 says the same.
    Ver 9.3.4 says error while interacting while interacting with scanner.........
    The scanner works with MSPaint, its own driver and application.
    What is wrong with this Adobe Acrobat Pro 9?

  • Conversion Error: I/O error while communicating with native process

    Hi,
    I am trying to use Oracle Outside In Technology Image Export for conversion of images. I am trying to run the example ExportTest that comes with the downloaded SDK.
    I get the below error while running the ExportTest example.
    Conversion Error: I/O error while communicating with native process .
    Am I missing any settings?
    Please guide to the right forum if this is not the one for posting queries on Oracle Outside In Technology Image Export.
    Thank you.

    Hi Revanth,
    I am using Image Export 8.3.7 and I am trying to run the java class "ExportTest" that is in the location sdk\samplecode\ExJava\Examples\ExportTest\src of the download.
    My input folder has one jpg - puzzle.jpg (this is just a simple jpg), I am trying to convert it to TIFF. ExportTest.java uses the classes in Export.jar . Export.jar is located in the sdk\samplecode\ExJava\Examples\ExportTest . You can see source files of the Export.jar at location sdk\samplecode\ExJava\Java API\src of the download. I am running the 'ExportTest' by providing the arguments (input folder, output folder and ix.cfg - this file comes with the download). So now when I run this class I was getting the error I mentioned in this post. Inorder to find more details about the error I modified the 'Export.java' (at sdk\samplecode\ExJava\Java API\src\com\outsideinsdk) just to printStackTrace when the exception occurs and rebuilt the 'Export.jar' and ran the 'ExportTest.java'.
    And below is the stack trace that I got :
    java.io.IOException: CreateProcess: nullexporter.exe "inputpath_u=AGkAbgBwAHUAdA
    BcAHAAdQB6AHoAbABlAC4ASgBQAEc=" "outputpath_u=AG8AdQBwAHUAdABcAHAAdQB6AHoAbABlAC
    4ASgBQAEcALgBUAEkARgBG" "outputid=FI_TIFF" "fallbackformat=FI_TEXT" "tiffcolorsp
    ace=24BitRGB" "preferoitrendering=false" "tiffcompression=Packbits" "mapbuffersi
    ze=8192" "defaultprintfontheight=20" "graphicwidthlimit=0" "reordermethod=off" "
    unmappablechar=0x002A" "timezone=0" "graphicheightlimit=0" "defaultmarginleft=14
    40" "ssshowheadings=false" "quickthumbnail=false" "graphicoutputdpi=0" "ssdirect
    ion=AcrossandDown" "defaultmarginbottom=1440" "ssshowgridlines=false" "dbshowhea
    dings=false" "readbuffersize=2" "whattoexport=all" "graphicsizelimit=0" "imagewa
    termarkopacity=0" "blue=-1" "handlenewfileinfo=no" "outputid=FI_TIFF" "lzwcompre
    ssion=enabled" "usedocpagesettings=true" "defaultmarginright=1440" "numberofstat
    callbacks=0" "dbfittopage=NoScaling" "tempbuffersize=2048" "pdffilterreorderbidi
    =no" "imagecropping=nocropping" "defaultmargintop=1440" "documentmemorymode=larg
    e" "m?
    at java.lang.Win32Process.create(Native Method)
    at java.lang.Win32Process.<init>(Win32Process.java:66)
    at java.lang.Runtime.execInternal(Native Method)
    at java.lang.Runtime.exec(Runtime.java:566)
    at java.lang.Runtime.exec(Runtime.java:491)
    at java.lang.Runtime.exec(Runtime.java:457)
    at com.outsideinsdk.Export.convert(Export.java:262)
    at com.outsideinsdk.ExportTest.convert(ExportTest.java:142)
    at com.outsideinsdk.ExportTest.main(ExportTest.java:214)
    hope this helps to find the problem.
    Thank you

  • Unknown Error while communicating with O365 BEC Web Service

    Hi Guys,
    When I try to add a new mail user in O365 Exchange, one strange error is thrown.
    Are any guys  kind enough to help me ?
    Here is the script and the error.
    PS C:\Users\o365-user> $cred = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList
    '[email protected]', $(ConvertTo-SecureString -String '*******' -AsPlainText -Force)
    PS C:\Users\o365-user> $session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri 'https:
    //ps.outlook.com/powershell/' -Credential $cred -Authentication Basic -AllowRedirection
    WARNING: Your connection has been redirected to the following URI:
    "https://pod51053psh.outlook.com/powershell-liveid?PSVersion=4.0 "
    PS C:\Users\o365-user> Import-PSSession $session
    WARNING: The names of some imported commands from the module 'tmp_zkc5sid4.gpq' include unapproved verbs that might
    make them less discoverable. To find the commands with unapproved verbs, run the Import-Module command again with the
    Verbose parameter. For a list of approved verbs, type Get-Verb.
    ModuleType Version Name ExportedCommands
    Script 1.0 tmp_zkc5sid4.gpq {Add-AvailabilityAddressSpace, Add-DistributionGroupMember...
    PS C:\Users\o365-user> $users=Get-MailUser
    PS C:\Users\o365-user> New-MailUser -Name '[email protected]' -DisplayName 'Test LIU'
    -MicrosoftOnlineServicesID '[email protected]' -Password $(ConvertTo-SecureString -String '*****' -AsPlainText -Force)
    Unknown Error while communicating with O365 BEC Web Service (Exception type
    "Microsoft.Exchange.Management.BecWebService.CouldNotCreateBecSyncServiceException", message=
    "Microsoft.Exchange.Management.BecWebService.CouldNotCreateBecSyncServiceException: Couldn't create BEC Web Service:
    The matching certificate for certificateSubject CN=ExoProvToO365.outlook.com, OU=Microsoft Corporation, O=Microsoft
    Corporation, L=Redmond, S=WA, C=US couldn't be found.
    Parameter name: certificateSubject ---> System.ArgumentException: The matching certificate for certificateSubject
    CN=ExoProvToO365.outlook.com, OU=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=WA, C=US couldn't be
    found.
    Parameter name: certificateSubject
    at Microsoft.Exchange.Security.Cryptography.X509Certificates.TlsCertificateInfo.FindFirstCertWithSubjectDistinguishe
    dName(String certificateSubject, Boolean checkForValid)
    at Microsoft.Exchange.Management.BecWebService.BecWebServiceHelper.CreateService(Uri url)
    --- End of inner exception stack trace ---
    at Microsoft.Exchange.Management.BecWebService.BecWebServiceHelper.InvokeWithRetry[TResponse](Action operation)
    at Microsoft.Exchange.Management.BecWebService.BecWebServiceHelper.GetUserByUpn(GetUserByUpnRequest request)
    at Microsoft.Exchange.ProvisioningAgent.BecWebServiceLiveIdManager.GetMemberType(SmtpAddress memberName)", inner
    message "System.ArgumentException: The matching certificate for certificateSubject CN=ExoProvToO365.outlook.com,
    OU=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=WA, C=US couldn't be found.
    Parameter name: certificateSubject
    at Microsoft.Exchange.Security.Cryptography.X509Certificates.TlsCertificateInfo.FindFirstCertWithSubjectDistinguishe
    dName(String certificateSubject, Boolean checkForValid)
    at Microsoft.Exchange.Management.BecWebService.BecWebServiceHelper.CreateService(Uri url)")
    + CategoryInfo : NotSpecified: (0:Int32) [New-MailUser], RecipientTaskException
    + FullyQualifiedErrorId : [Server=SG2PR01MB0540,RequestId=d97a193e-91a7-4430-ac64-6b7003f5b9b0,TimeStamp=4/23/2015
    9:37:58 AM] [FailureCategory=Cmdlet-RecipientTaskException] 3F9FDA25,Microsoft.Exchange.Management.RecipientTasks
    .NewMailUser
    + PSComputerName : pod51053psh.outlook.com
    PS C:\Users\o365-user> New-ManagementRoleAssignment -Role 'ApplicationImpersonation' -User 'test1_1@smokeazu
    rebeta5.onmicrosoft.com'
    Couldn't find a user with the identity "[email protected]".
    + CategoryInfo : NotSpecified: (:) [New-ManagementRoleAssignment], ManagementObjectNotFoundException
    + FullyQualifiedErrorId : [Server=SG2PR01MB0540,RequestId=88777637-298d-4bb1-972f-b61161566a57,TimeStamp=4/23/2015
    9:37:59 AM] [FailureCategory=Cmdlet-ManagementObjectNotFoundException] 921A76AD,Microsoft.Exchange.Management.Rba
    cTasks.NewManagementRoleAssignment
    + PSComputerName : pod51053psh.outlook.com
    PS C:\Users\o365-user> New-ManagementRoleAssignment -Role 'Mailbox Search' -User '[email protected]
    microsoft.com'
    Couldn't find a user with the identity "[email protected]".
    + CategoryInfo : NotSpecified: (:) [New-ManagementRoleAssignment], ManagementObjectNotFoundException
    + FullyQualifiedErrorId : [Server=SG2PR01MB0540,RequestId=2b64d3a2-97da-4de5-be8c-00ad73452456,TimeStamp=4/23/2015
    9:38:00 AM] [FailureCategory=Cmdlet-ManagementObjectNotFoundException] 921A76AD,Microsoft.Exchange.Management.Rba
    cTasks.NewManagementRoleAssignment
    + PSComputerName : pod51053psh.outlook.com
    PS C:\Users\o365-user> Remove-PSSession $session
    PS C:\Users\o365-user>
    Thanks
    Budlion LIU

    Hello,
    Or you can also ask on Exchange Online Forum:
    https://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Error while communicating with the server

    Hi Experts,
    I'm having the following issue, when I try to send data using an input schedule the server says that there was an error while communicating with the server and don't send the data, I took a look at the log file and it says the following,
    ==============[BPC Logging]==============
    [Message Type] : ERROR
    [Job Name]     : OSoft.Services.Application.FileAccessService.FileAccessServiceProxy
    [DateTime]     : 4/6/2011 8:42:44 AM
    [UserId]       : CAMESAP\BPC_SYSADMIN
    [Message]       : UJF_EXCEPTION E018     Cannot find document/directory 0
    ==============[BPC Logging End ]==============
    Also i went to take a look at the default script logic, because i remember that this error happened to me when i wrongly program an script logic in the default.lgf  but it shows me the following error when I open it,
    System.InvalidCastExeption: Specified cast is not valid
    at System.data.DataColumnCollection.get_Item(String name)
    at System.data.DataRow.get_Item(String columnName)
    at Osoft.Consumers.Admin.AdminLogicClient50.LogicMain.GetLogic()
    If I compile the file, the error stop appearing, put with all new logic files it happens at first, I think that these two errors are very deep related, if anyone can help me will be very appreciated,
    Thanks in advanced

    Hi,
    I have faced the similar kind of problem in BPC NW 7.5 SP5.
    The main reason is when you are trying to send any data via input schedule, you will get this web server communication issue.
    1) Check if any thing you are calling script logic under default.LGF. Exclude the logic out from default and test it.
    2) Process all the dimensions in application
    3) Perform Lite optimization and check are there any errors.
    4) Finally check BPC COM+ services  and check if any service stopped and also check osoft send governer service in microsoft services.
    5) Diagnoise usign server manager.
    6) Try input some thing in apshell and check if u face the same web server communication error?

  • BB Error while sync with outlook

    Hi-
    Appreciate if you guys can help me in finding a solution!
    I am getting the following error while syncing with OutLook " error record with specific id error (FF1E892B) not found"
    I am using BB Tourch 9800!
    Rgds.

    Found out that this is a known error with no established timeframe for a fix.

  • Error while synching PDA with server

    Hello,
    Before I can load some CRM applications on to my PDA, I am trying to synch my PDA with the server.
    When I synchronized I got the device ID and also the message that synch has started successfully. But when I go in the NWA of the server ( on my laptop) and search this device ID it shows the following error
    "Error while Smart Sync inbound processing. Reset Smart Sync data on device to ensure consitency with middleware. Contact SAP Support and provide following detalied information: Inbound Processing of container with index 45 failed: Can not find top row"
    Does anyone know what could be wrong here?
    Regards,
    Prafful

    Hi,
    We are also experiencing this error. Where you able to find a solution? Do you have any troubleshooting steps you could share with me for when it does occur?
    Kind Regards,
    Vinnie

  • Problems synching with Palm Tungsten T3

    I am having problems synching with my Palm Tungsten T3 datebook to Outlook 2003.  It was working up until about a week ago.  When I try to synch, it works for a few items and then I get the error message Pilot connector "Unable to read application data".  I click OK and then it finishes.  Below is the information I get in my log:
    HotSync operation started 07/29/08 15:21:15
    OK Expense
    OK Note Pad
    OK Voice Memo
    OK Photos
    Palm handheld database could not be opened (4004).
    Unable to communicate with Palm handheld (400D).
       -- Backing up db Bluetooth Trusted Devices to file C:\Program Files\Palm\PageT\Backup\Bluetooth_Trusted_Devices.PDB
       -- Backing up db Bluetooth Device Cache to file C:\Program Files\Palm\PageT\Backup\Bluetooth_Device_Cache.PDB
       -- Backing up db Saved Preferences to file C:\Program Files\Palm\PageT\Backup\Saved_Preferences.PRC
    OK System
    HotSync operation complete 07/29/08 15:22:20
    I use Intellisync Desktop and Windows XP.  I tried a soft reset with no luck. 
    Any help would be great!
    Thanks!
    Tammy
    Post relates to: Tungsten T3

    don't know if you can help.  i have a t-3 and when i last synced it erased all of my calander on both the device and my palm desktop.  the log said i had exceeded my file number and needed to erase some calander files and resynch.  tried but to no avail.  i can see folders in my palm program folder in windows i have calander backup data.  but i cannot import them under the file options from palm desktop program.  need some help please, i never knew before but do know now i should've backed up that data onto a cd or thumb drive.
    Post relates to: Tungsten T3

  • Cannot send email with Palm Treo Pro

    Hi,
    We have a Palm Treo Pro that was previously configured to sync with exchange 2003 and at the same time also had an IMAP email account setup for another email address.  We have since removed the Exchange email account and only have the IMAP account configured.  Since removing the exchange account we can no longer send email from the phone, but can receive fine.  The error we get when trying to send is listed below.
    "The message(s) could not be sent.  Check that you have network coverage and that you account information is correct then try sending again"
    The connection is fine because we can receive email and browse fine.  The account information is also correct.  We are using the SMTP server settings for the phones provider and that requires no authentication.  I have also tried a different SMTP server with the appropriate user credentials but still get that message.
    I have contacted the phone provider (Telstra) but they were no use.
    We did have to load on a self signed certificate to get the exchange email working and I dont know whether this is causing any issues.
    If anyone has any ideas it would be greatly appreciated

    Maybe this will help. If you monitor the "More Like This" box, other threads appear. Opening them usually displays other threads.
    http://https://discussions.apple.com/message/19122030#19122030
    http://https://discussions.apple.com/message/18048618#18048618

  • Synch with palm on a pc?

    Hi,
    I'm switching from a palm treo to the iphone. Has anyone been successful in synching palm contacts and calendar?
    Thanks.

    I am still working on this also. I spent an hour on the phone with the Palm folks. You need to have the conduits that will sync the Palm to Outlook. It is automatically a part of the lastest Palm Desktop software. Follow their download and install instructions.
    Then select the custom field in the Palm Hotsync manager and select Outlook as the sync location. I chose the "handheld over writes the desktop" option, as I am trying to get my calendar into Outlook and ultimately into my iPhone.
    Then turn on hotsync and it everything goes smoothly, the data goes from your handheld to Outlook.
    I did all of this and my palm handheld tried to sync to Outlook, but was not successful. Outlook on my computer won't sync with my iPhone either, so it may be a problem with my configuration.
    I hope it works for you. Let us know if it works for you.

  • Daylight Savings Time issue with Palm Treo 755p/Missing Sync 6.0.6

    I'm not sure where the fault is, but here's what a user sees here:
    User has a Palm Treo 755p with the 1.08 software installed.
    Since DST on March 14th, when he syncs the iCal information to the phone using Missing Sync 6.0.6, the information on the phone is pushed ahead one hour.
    But the odd thing about it is how it shows on the phone.
    User created a repeating event from March 12-20 from 9-10 a.m. called "test 9" for an example of this.
    On March 12 and 13, this shows as "test 9" -- at 9:00 on the Treo
    From the 14th on, it shows as: "test 9 (9 am EST)" -- but it is entered at *10:00* a.m.
    What I don't know is if this is a Missing Sync issue or a Palm OS issue.
    User's computer is running 10.6.2 -- and both computer and Palm are in the Eastern time zone.
    I'm open for suggestions here -- is this a *Palm* issue? Or something else?
    Thanks!

    We "fixed" this by noticing that -- for whatever reason -- Detroit (we're in Ann Arbor, actually) shows as "Eastern Standard Time" where it seems that every other major city in the time zone (Columbus, Indianapolis, New York, Miami, Philadelphia, etc...) shows as "Eastern Time".
    So we set up iCal on this computer to use New York ("Eastern Time") and all the events added to iCal after that synced properly.
    I tried to add "Detroit" to the Palm, but had no luck in syncing with that.  I think the "Eastern Time" thing is key.   I have a Bug Report into Apple about the fact that the time zone seems wrong for us.
    That said, while I could  change pre-existing events from "Eastern Standard Time" to "Eastern Time" in iCal, those events did *NOT* sync to the Palm correctly.
    The user had to delete/readd the events in the right "time zone" to get them to sync correctly.
    I'd be curious to know if this solution (?) works for you as well.

  • Error while posting with Tax code

    Dear All,
    I am getting the following error while i am trying to post with a tax code. Can someone tell me what could be the issue?
    Customization for RIL j_1iindcus missing in table
    Message no. 8I303
    Diagnosis
    The customization details have not been maintained for this company
    Procedure
    Please use the localization IMG or Global settings
    to maintain the company settings
    Regards
    Suresh

    Dear Suresh,
           If  you are using versions below 4.7 execute T_Code <b>J1IT</b>, go to <b> India Localization Menu->Global Settings->Company Settings</b> and add an entry for your Company Code and save.
           If you are on higher versions use the following path:
    <b>SPRO --> Logistics - General --> Tax on Goods Movement --> India --> Basic Settings --> Maintain Company Code Settings.</b>
    This should solve the issue.
    Kindly let me know if it was useful.
    Regards,
    Mary Sofia

  • Critical Error while compiling with AIR16 (*.ipa export)

    Hey,
    my application crashed while compiling with AIR16. (Flex 4.13.0-AIR 16.0)
    With AIR15 it works well.
    First I thougt, the reason might be the included ANE, but it isnt. The ANE works fine with another project.
    In fact other projects also work with AIR16.
    Any ideas?
    Error message:
    Error occurred while packaging the application:
    Undefined symbols for architecture armv7:
      "_traits:AOTBuildOutput-0000000101_6:234::Span", referenced from:
          _AOTBuildOutput-0000000101_6:9729:Edge in AOTBuildOutput-0000000101_6.o
      "_traits:AOTBuildOutput-0000000101_6:234::Edge", referenced from:
          _AOTBuildOutput-0000000101_6:9706:flashx.textLayout.compose::Parcel/allocateEdge in AOTBuildOutput-0000000101_6.o
      "_traits:AOTBuildOutput-0000000100_5:18::LocaleID", referenced from:
          _AOTBuildOutput-0000000100_5:265:mx.resources::LocaleSorter$/sortLocalesByPreference in AOTBuildOutput-0000000100_5.o
    ld: symbol(s) not found for architecture armv7
    Compilation failed while executing : ld64
    EDIT:
    I tried it also with Flex 4.14.0-AIR 16.0. Got this message:
    Error occurred while packaging the application:
    Undefined symbols for architecture armv7:
      "_traits:AOTBuildOutput-0000000101_6:248::Span", referenced from:
          _AOTBuildOutput-0000000101_6:11261:Edge in AOTBuildOutput-0000000101_6_1.o
      "_traits:AOTBuildOutput-0000000101_6:248::Edge", referenced from:
          _AOTBuildOutput-0000000101_6:11238:flashx.textLayout.compose::Parcel/allocateEdge in AOTBuildOutput-0000000101_6_1.o
      "_traits:AOTBuildOutput-0000000101_6:207::CellCoords", referenced from:
          _AOTBuildOutput-0000000101_6:8073:flashx.textLayout.elements::TableElement/normalizeCells in AOTBuildOutput-0000000101_6.o
          _AOTBuildOutput-0000000101_6:8072:flashx.textLayout.elements::TableElement/getBlockedCoor ds in AOTBuildOutput-0000000101_6.o
      "_traits:AOTBuildOutput-0000000100_5:18::LocaleID", referenced from:
          _AOTBuildOutput-0000000100_5:340:mx.resources::LocaleSorter$/sortLocalesByPreference in AOTBuildOutput-0000000100_5.o
    ld: symbol(s) not found for architecture armv7
    Compilation failed while executing : ld64

    We've built a lot of test-apps including the same components and libraries as in this app, but we are not able to reproduce this crash in other projects.
    The project works fine in the Simulator without any crashes or compile errors!

  • Error while connectng with the database

    hi,
    I am working with the oracle load testing for web application and now it is using the default database 10g.Then i have installed 11g database in my desktop And also by using oracle application testing suite database configuration i have connected with 11g database also both system are in same network.
    while connecting with the database the following error has occured
    Error opening database '11g'
    Error connecting to the database.
    ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    Driver's SQLSetConnectAttr failed
    ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    solution needed

    hi asif,
    i have configured the tnsnames and listener file with the following
    tnsnames.ora
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    ORACLR_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
    (CONNECT_DATA =
    (SID = CLRExtProc)
    (PRESENTATION = RO)
    XE =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = XE)
    orcl =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.103)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = orcl)
    OTM_CONNECTION_DATA_1 =
    (DESCRIPTION =
         (ADDRESS_LIST =
         (ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xxx.xxx.xx)(PORT = 1521))
              (CONNECT_DATA =
              (SERVER = DEDICATED)
         (SERVICE_NAME = orcl)
    and listener.ora contains
    # lISTENER.ORA Network Configuration File: /u01/app/oracle1/product/11.1.0/network/admin/listener.ora
    # Generated by Oracle configuration tools.
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xxx.xxx.xx)(PORT = 1521))
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = /u01/app/oracle1/product/11.1/db_1)
    (PROGRAM = extproc)
    (SID_DESC =
    (GLOBAL_DBNAME = orcl.localdomain)
    (ORACLE_HOME =/u01/app/oracle1/product/11.1/db_1)
    (SID_NAME = orcl)
    )

Maybe you are looking for