Blur tool issue

when I try any of the 3 blur options all I get is a thumb tack No adjustment circle on screen I click on thumb tack in different areas of picture nothing happens
no grids or dotted lines anywhere on pict either
Help

To get the full benefit of the new blur features, you need the GPU enabled. If you don't have a supported graphics card and a current driver, you can expect issues. If you disable the use of the GPU, you will be unable to use all the features of the field, iris, and tilt blur.
Check out this link to verify your card is supported and then be sure to visit the manufacturer's website and get the latest driver.
Additional GPU related troubleshooting items are also included. Let us know what happens after you verify these items.
Thanks
Pattie
FAQ: What features use the GPU and how do I troubleshoot GPU issues?

Similar Messages

Help! Blur tool issues with Adobe CC/Windows 8/Wacom Bamboo Fun tablet

Hi everyone, would really appreciate your help with something frustrating. I have been using Adobe CC quite happily since it was released, but after upgrading to a faster desktop that runs Windows 8, for some reason the Blur tool is playing up. I've upgraded drivers and cleared caches but it keeps happening sporadically. Sometimes it will work, sometimes it wont. My pc isn't the fastest in the world (ie not video editing speeds) but is perfectly competent to run Photoshop; I've run the program on slower machines and am used to the lag that happens there, so this is something different.
What happens; the blur tool is slow, and inaccurate to the extent of being unusable. When I attempt to blur out a section, for example a section of background, it will instead blur out a totally different section of the photo, for example, the face of the subject.
I use a Wacom Bamboo Fun tablet CTE 450; I have upgraded its drivers as well.
Any suggestions would be greatly appreciated; this is only a small thing but is slowly driving me mad! I don't use the blur tool constantly so it isn't preventing me from doing anything, but it is handy when it works and extremely irritating when it won't!
Thanks in advance!!

Also adding; the same error happens when I use a mouse, which seems to indicate it isn't the tablet's fault.

Creative cloud photoshop blur tool not work as it should be

creative cloud photoshop blur tool not work as it should be !
I go to blur a painting i am doing and it does not blur enough and I am using wacom Intuos 5 med pen tablet.
and I even set the tablets sensitivty for pressure lower then default and still not getting the blur tool to do its job.
I even adjusted the brush settings too to be able to blur even more on hard settings, still nothing.
at least it not bluring enough to see any major changes.
the only way i can blur anything is by using the fliters blur or the brushes ( mixer brush ) settings to mix colors and do it that way.
(note) I will not post my systems specs sorry I don't do that and even the tech from adobe said I do not have to. and so I wont !
just need advise not to share system specs.
and thats what this forums board is for getting advice and read what others say about the issue at hand.
it's not to post or share system specs !!!
so with that out of the way I need advice only please ?

Hi,
It might be your image is too big in terms of pixel dimensions for the blur tool to work well.
If you zoom to 100% do you see any change when using the blur tool?
What are the pixel dimensions of the image?
(Image>Image Size)
If you try a small image, does the blur tool work?
What about when you use the mouse instead of your tablet?
Can you at least tell us what operating system and version of photoshop your using?

Blur Tool Problem - Random Lines (Adobe CC 2014.2.1 Release)

Hi,
I'm hoping that I haven't ticked some obscure option, but I have been using the Blur Tool in Photoshop CC for a while and after the most recent update have had issues with it - basically, when I try to use it to blur a specific area, it randomly goes all over the place (as if I'd grabbed the mouse and moved it rapidly in a random direction). Obviously if I can't use the blur tool with precision (well, any tool really!) it makes it hard to work!
Some interesting notes / observations:
The sharpen tool works perfectly - only sharpens where I point it, which makes me think that it's not an issue with my mouse. No other tools I use have the issue either - only the blur tool!!
I have no other pointing devices plugged in (I had a pen tablet plugged in - long story, prefer the mouse over the tablet :-)) so it's not some other pointing device making noise.
Has anyone else encountered this problem, and if so, how did you resolve it?
Thanks - blurring and then going into the layer to delete the random lines of blur is getting tiresome - and it's not very precise either.
Cheers,
Terence.

Check out this other thread I started
http://feedback.photoshop.com/photoshop_family/topics/using-text-tool-freezes-photoshop-cc -2014-2-0-20140926-r-236-x64-release?utm_source=notification&utm_medium=email&utm_campaign =new_reply&utm_content=reply_button&reply[id]=14914157#reply_14914157
There it's help there. I've not totally solved my problem but others seemed to have.
Richard

Blur Tool doesn't work properly in Photoshop CS6

I like digital painting and just got a new Wacom Intuos. I wanted to finish a picture in PS C6 but everytime I use the blur tool it makes some weird edges, which it didn't make before!
How can I fix it?

The Layer seems to be empty and you don’t have »Sample All Layers« checked, so that seems strange.
Another point, though: Why not apply the Layer Mask to the Group instead of applying it to each Layer individually?

Can't get over the tools issue when re-installing Elements 11

I've been using Elements 11 on Windows Vista (64) with no problems.
One day, instead of starting Elements, I got the message to re-install Elements for some tools issue. So I uninstalled but re-install never got through. When it comes to the Organizer section, it won't pass some tool issue again.
ASA did not fix the problem. When I manually search the logfiles under installers, I find myself drowning in millions of errors.
Stuff like this:
FATAL: DB001: Database file '{98CE8819-87AA-4814-8167-ADDDD513485F}.db' does not exist.
FATAL: DF012: Installation source path does not exist: C:\Program Files (x86)\Common Files\Adobe\Installers\uninstall\{98CE8819-87AA-4814-8167-ADDDD513485F}.db
ERROR: Updating driver data failed. Driver entry was notadded. ARP estimated size 0KB
ERROR: Updating driver data failed. Driver entry was notadded. ARP estimated size 479709KB
or in another log file I found it is this:
ERROR: DF037: Unable to delete directory "C:\ProgramData\Adobe\CameraRaw\LensProfiles\1.0\Sony". Error 145 Das Verzeichnis ist nicht leer.(Seq 4)
ERROR: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 4)
ERROR: DF037: Unable to delete directory "C:\ProgramData\Adobe\CameraRaw\LensProfiles\1.0\Sigma\Sony". Error 145 Das Verzeichnis ist nicht leer.(Seq 38)
ERROR: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 38)
ERROR: DF037: Unable to delete directory "C:\ProgramData\Adobe\CameraRaw\LensProfiles\1.0\Sigma\Sigma". Error 145 Das Verzeichnis ist nicht leer.(Seq 80)
ERROR: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 80)
ERROR: DF037: Unable to delete directory "C:\ProgramData\Adobe\CameraRaw\LensProfiles\1.0\Sigma\Pentax". Error 145 Das Verzeichnis ist nicht leer.(Seq 116)
ERROR: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 116)
ERROR: DF037: Unable to delete directory "C:\ProgramData\Adobe\CameraRaw\LensProfiles\1.0\Sigma\Nikon". Error 145 Das Verzeichnis ist nicht leer.(Seq 171)
ERROR: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 171)
ERROR: DF037: Unable to delete directory "C:\ProgramData\Adobe\CameraRaw\LensProfiles\1.0\Sigma\Canon". Error 145 Das Verzeichnis ist nicht leer.(Seq 213)
ERROR: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 213)
ERROR: DF037: Unable to delete directory "C:\ProgramData\Adobe\CameraRaw\LensProfiles\1.0\Sigma". Error 145 Das Verzeichnis ist nicht leer.(Seq 214)
ERROR: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 214)
ERROR: DF037: Unable to delete directory "C:\ProgramData\Adobe\CameraRaw\LensProfiles\1.0\Nikon". Error 145 Das Verzeichnis ist nicht leer.(Seq 241)
ERROR: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 241)
ERROR: DF037: Unable to delete directory "C:\ProgramData\Adobe\CameraRaw\LensProfiles\1.0\Canon". Error 145 Das Verzeichnis ist nicht leer.(Seq 284)
ERROR: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 284)
ERROR: DF037: Unable to delete directory "C:\ProgramData\Adobe\CameraRaw\LensProfiles\1.0\Apple". Error 145 Das Verzeichnis ist nicht leer.(Seq 287)
ERROR: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 287)
ERROR: DF037: Unable to delete directory "C:\ProgramData\Adobe\CameraRaw\LensProfiles\1.0". Error 145 Das Verzeichnis ist nicht leer.(Seq 288)
ERROR: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 288)
ERROR: DF037: Unable to delete directory "C:\ProgramData\Adobe\CameraRaw\LensProfiles". Error 145 Das Verzeichnis ist nicht leer.(Seq 289)
ERROR: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 289)
ERROR: DF037: Unable to delete directory "C:\ProgramData\Adobe\CameraRaw\CameraProfiles\Camera". Error 145 Das Verzeichnis ist nicht leer.(Seq 712)
ERROR: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 712)
ERROR: DF037: Unable to delete directory "C:\ProgramData\Adobe\CameraRaw\CameraProfiles\Adobe Standard". Error 145 Das Verzeichnis ist nicht leer.(Seq 954)
ERROR: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 954)
ERROR: DF037: Unable to delete directory "C:\ProgramData\Adobe\CameraRaw\CameraProfiles". Error 145 Das Verzeichnis ist nicht leer.(Seq 955)
ERROR: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 955)
ERROR: DF037: Unable to delete directory "C:\ProgramData\Adobe\CameraRaw". Error 145 Das Verzeichnis ist nicht leer.(Seq 956)
ERROR: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 956)
----------- Payload: {1A726E43-1269-42D5-9915-54FF4BC5F3D1} Camera Profiles Installer_6.5_AdobeCameraRawProfile6.0All 6.5.0.0 -----------
ERROR: DF037: Unable to delete directory "C:\Program Files (x86)\Common Files\Adobe\Elements STI Installer\Adobe\AdobePatchFiles". Error 145 Das Verzeichnis ist nicht leer.(Seq 1001)
ERROR: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 1001)
ERROR: DF037: Unable to delete directory "C:\Program Files (x86)\Common Files\Adobe\Elements STI Installer\Adobe". Error 145 Das Verzeichnis ist nicht leer.(Seq 1002)
ERROR: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 1002)
ERROR: DF037: Unable to delete directory "C:\Program Files (x86)\Common Files\Adobe\Elements STI Installer". Error 145 Das Verzeichnis ist nicht leer.(Seq 1003)
ERROR: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 1003)
WARNING: Failed to update the csu inventory for {1A726E43-1269-42D5-9915-54FF4BC5F3D1} Camera Profiles Installer_6.5_AdobeCameraRawProfile6.0All 6.5.0.0 return values 13:110

Yorengl the DW063 error indicates then inability to write to those specific directories. Please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html for information on how to adjust your file permissions.

Blur tool help

Hello everytime I use the Blur tool it will only blur when I click on it and not when I hold down the mouse as I go around the image. This only happens in Photoshop CC 2014. But when I use Photoshop Elements 12 it works fine in the past update I hoped it was fixed, but it will still do this, sometimes it will work normally that is when I hold the mouse down the blur line will go along the image fine without me having to keep clicking the mouse button over and over. What is wrong is it a setting I can fix this with? I have defaulted the brushes and it will still do it. I sometimes end up just using Elements 12 which isn't as good as CC 2014 to me.

I defaulted the setting so it would basically look the same.
Meaning what exactly?

Blur Tool in CS4 not working

Blue Tool is not working in CS4 have no idea why.
Maybe there is a setting that needs clearing? How to fix?

It's a complex program. Take some time to learn it. The tools do very specific things, but they are just that - tools. You need to learn how to use them well for the program to deliver its value. Photoshop is not a program you can learn to use overnight.
Making a selection then doing a gaussian blur does not blur the entire image. Read what's written carefully, and if you don't understand something, look it up or ask here about it. Someone will probably give step by step instructions:
For example:
1. Activate the Polygonal Lasso tool in the Tools panel.
2. Set the Feather amount to a small value (0 or a few pixels) at the top of the Photoshop main window.
3. Click points all around what you want to blur.
4. Double click or return to the origin point to close the selection.
5. Choose Filter - Blur - Gaussian Blur, and dial in the amount of blur you want.
Back to your original post - if you are not seeing screen updates with the Blur tool, it's possible your display driver is failing and you need to update it from the web site of the maker of your display card.
-Noel

What is wrong with the Photoshop CC 2014 blur tool?

What is wrong with the Photoshop CC 2014 blur tool? It only blurs pixels of initial contact with the tool. It does not blur any pixels that are swiped by the tool as you drag it across the screen. Photoshop CS6 blur tool works just fine. Togeling between two versions of Photoshop to get the work done is a drag!

all my settings both in the Options Bar and the Brush Panel are the same whether in CS6, CC, or CC 2014.
Let’s see the screenshots.
Don't know how to post a screen shot
Use the camera icon.

My Blur Tool is not working.

Ive reset all tools, and still no luck, I cannot retouch skin without the Blur... is there anything short of uninstalling and reinstalling I can do?
anyone that can help can reply to me personally at [email protected] please.

Brush over some things that are sharp to ensure the effect isn't just to subtle to see on skin.
Please post a screen grab showing the entire state of Photoshop at the moment it refuses to work.
While it sounds like you have many things set right, given the sheer number of modal things that you can accidentally change and leave set in Photoshop that would cause a tool to appear not to function, there's always the possibility you've still got something set wrong. A screen grab would help folks here see what you're doing more clearly.
Also, what are the specific brush settings for the Blur Tool? DO you have any of the dynamics turned on?
Are you working on the appropriate layer? Have the layer pixels selected, and not the mask?
Got something selected elsewhere?
Implied here is that the Blur Tool does work - I just tested it. I also don't recall anyone else here on the forum in recent history claim the Blur Tool doesn't function.
-Noel

Text tool issue resolved with new upgrade

It appears the text tool issue has been resolved with the new upgrade, now you don't have to use the transform function to move titles
now the text tool converts to the move arrow tool as expected.
They said it was a Lion's bug.
Thanks,
AppleLou

If it's a "Mobility" card then chances are it's in a laptop, and many laptop manufacturers are required to be the source for driver updates. You might have
to check with the computer maker.
If there's not a driver update for it, it's possible you could try downgrading the driver to an older version if one can be found.
What operating system are you running (XP, Vista, 7, 32 or 64 bit)?
I see they have a new release for your card for Vista and Windows 7 32 bit, for example, here: http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-32.aspx
-Noel

Blur Tool

Хотелось бы чтобы был blur? который лучше имитирует Tilt Shift. Подобный видел на альтернативном редакторе как линейный так и радиальный, суть его работы заключается в том, что выбрав резкий участок снимка внутренние границы и внешние на которых будет максимальное размытие. В итоге мы получаем наростающее размытие от 0 px до любого назаченного числа, например 15 px от резкого до совсем размытого. Классический приём использовать полупрозрачную маску, знаю, но всё-таки он не очень похож на растоящий эффект tilt shift, который можно использовать не только для иммитации tilt shift.
Пожалуй я очень хотел бы чтобы подобный blur инструмент был и Photoshop CS.

I have been having this problem with the blur tool in CS6 for a while also... Just to say (if you're still wondering) or for any others. After spending a long while reading through a lot of frustrating answers that didn't help me. I.e. 'it's just a very subtle tool' or the size of the image needs to be taken into account, "it's something about your video card', etc, etc... It may not be anything technical at all. (**I failed, so I'm not trying to insult anyone this applies to, just trying to help after not finding the answer myself and spending a lot of unnecessary time on what was a very simple fix.**)
Depending on how you think about it, the tool setting is counter intuitive:
THE SIMPLE ANSWER FOR DUMMIES >>> MAKE SURE THE TOOL HARDNESS IS SET TO ZERO

Blur Tool Problem

I am using Photoshop CS6 on Windows 8. I can do photo editing, etc in Photoshop,
but when I am using the blur tool to blur the background, Photoshop stops working
and closes down. I open back up.. work on the blur again, little and save, do little more
and save but soon, it stops working again and closes down.
What is causing he program to just stop working and close down??
So far everything else seems to be working fine witht he program..
thanks
Barbara
Message was edited by: Mamacat104

Is Photoshop up to date? http://adobe.ly/PS-Up-To-Date

Blur tool results seen only in palatte bin

I am new at Photoshop.
I have Elements 7, Windows 7.
When working with the blur tool, I see no change to my photograph. However I do see changes on the layer thumbnail in the palatte bin. What am I missing? It worked for a previous photo, but not with a new one I opened up.

HistoricalNutrition,
The blur tool is generally ineffective, as I see it.
If you need to blur the background, yet keep the foreground in focus, try the following:
Open picture file
Duplicate background layer
Apply Gaussian blur to the background copy layer. This will blur everything. Not to worry, we'll fix it.
Place a levels adjustment layer between the background and background copy layers.
Clip the background copy layer and the adjustment layer - Layer>create clipping mask
Left click the mask (the white rectangle)
Use a black brush to bring the foreground back into focus. If you go too far, correct with a white brush
http://www.pixentral.com/show.php?picture=1JCdJrZTXS9taljAdXxrg6APGQGB
In this example, I have masked the blurred bricks in order to allow the "sharp" bricks to show.

Blur tool acting strangely

PS CC 2014
I am trying to use the Blur tool to soften some faces. I duplicate the image first and work on the duplicate. I think all my settings are normal.
When I try to draw on a specific area (just one click, or one click-and-drag), other areas of the photo are also affected, in addition to the area just under the brush.
What's wrong?

Anytime a tool is acting strangely, I would suggest resetting it.
Select your tool. Right click on its' icon on the top Options bar.
Screenshot example is the Type Tool, but this should explain it.

Blur tool issue

Similar Messages

Maybe you are looking for