BNE_UIX_PHYSICAL_DIRECTORY is not configured error in R12

Hi All,
We are on 12.0.4 instance, i have attached responsibility "Desktop Integrator" to user and if i click on "Create Document" It is throughing an error "BNE_UIX_PHYSICAL_DIRECTORY is not configured". I have checked some document 430991.1 in metalink, all are refered to Profile option "BNE_UIX_PHYSICAL_DIRECTORY" and remove any value present in the profile option. I did the same and bounced the Apache. ev en though we are getting the same error. Please guide me.
Many Thanks in advance..

To folow the note [ID 549758.1], i pur the profile option in the site or in the Responsability?Site level -- Make sure you bounce Apache then.
Please also check your other thread -- Re: Oracle Web ADI with R12 Error :BNE_UIX_PHYSICAL_DIRECTORY is not configured
Thanks,
Hussein

Similar Messages

Dmg will not launch, "not configured" error

I have 10.6.7 and all of a sudden dmg will not launch giving the "not configured" error. I have tried other methods listed in forums such as deleting caches using applejack with a deep clean and even reinstalling the combo update for 10.6.7 and I am getting the same error.
The console gives the same error message. I am not sure what to try next. I am avoiding reinstalling the entire OS. The is so Windows to me.
TIA for anyone who can help.
Steve

For OS X 10.6, reinstalling the OS is nothing like windoze. Do it. It will replace ALL OS components and Apple's basic apps, such as Safari, TextEdit, and Terminal, but leave everything, including all settings in place. if that fixes your problem, then run Software Update and install what pops up, repeat until it reports you're up to date, repair permissions, and restart. I've never used AppleJack or any of those other so-called tools.

Messages button giving "Service not configured" error

Hi,
I have created my voice mail ports, LG,HL and HP. I also created voice mail pilot and profile, assigning the pilot to profile and then assigning profile to the line of the IP Phone.
I can dial the pilot number and voice mail port numbers, but when I push the "Messages" button on the IP Phone, I get service not configured. I looked at enterprise parameters for messages and noticed that the URL was missing. Can someone post what the URL should be for messages under enterprise parameters?
Any other ideas as to why I am getting this error?
Cheers

Did anyone find the answer to this issue?
I have a similar issue with a differrent service (one button login for ipcc).
When I hit the services button on my physical 7965 phones it states no services are configured.
If I press the services button on my CIPC softphone it works fine.
The 7965 is connected to a 3560 switch and a 2811 router.
The configuration is exactly the same for both phones and both phones are subscribed to the service.
All help will be greatly appreciated.

610 Database Not Configured Error?

Hello,
We have had Zen 7 installed for quite a while and now are looking to get
some information from the inventory. Of course, now that we are wanting to
use it we have noticed that it hasn't ever been working completely as we
are getting the "610: The Database Location policy is not configured."
error. I have checked and double-checked the Service Location Policy and
the Server Package. Both have the Zenworks Inventory database configured
to the inventory database object for the server.
What else should I be checking?
Timothy M. Musa
Community Consolidated School District 93
Carol Stream, IL
http://www.ccsd93.com/

Tim Musa <musat_@_ccsd93.com> wrote in
news:[email protected]:
> Hello,
>
> We have had Zen 7 installed for quite a while and now are looking to
> get some information from the inventory. Of course, now that we are
> wanting to use it we have noticed that it hasn't ever been working
> completely as we are getting the "610: The Database Location policy is
> not configured." error. I have checked and double-checked the Service
> Location Policy and the Server Package. Both have the Zenworks
> Inventory database configured to the inventory database object for the
> server.
>
> What else should I be checking?
>
Well, after poking around a bit more, I cleared the associations for the
policy and the package and re-associated them and the inventory server has
started.
Timothy M. Musa
Community Consolidated School District 93
Carol Stream, IL
http://www.ccsd93.com/

HrPrefs not configured error message

Hi,
When i click on Navigate -->Preferences --> Financial Reporting in the System 11 Workspace, i get the following error.
" Required application module reporting.HRPrefs is not configured. Please contact your administrator.".
Anyone familiar with this problem?
What can be the loss in functionality if we are unable to configure these preferences.

Check the following cases:
1. Whether web server routing has been properly configured for the Financial Reporting Module.
2. Was workspace configured & deployed before Financial Workspace? If this has happened, you will need to configure and deploy Workspace again and reconfigure web server routing.
Regards,
Sayantan

Web ADI Configuration Error

Hi,
We are getting the following error.
Web ADI Configuration Error
BNE_UIX_PHYSICAL_DIRECTORY is not configured. FPRIVATE "TYPE=PICT;ALT=http://hostname.domainname:port/OA_HTML/cabo/images/t.gif"
I followed the below thread
http://kr.forums.oracle.com/forums/thread.jspa?threadID=876022&tstart=0
followed all the Metalnk Notes and did all the configurations
but still not working
Apps version : 11.5.10.2
DB version : 10.2.0.2
Patches :
5240536 - applied
2645031 - Not Applied
plz help

Hi,
The Notes are somehow conflicting
*274179.1*
Check if following database profiles are set.
BNE_UIX_BASE_PATH
BNE_UIX_PHYSICAL_DIRECTORY
If set, please unset the above profiles (remove from the site value)..
*888386.1*
Set the following 2 system profiles as follows:
BNE UIX Physical Directory $COMMON_TOP/webapps/oacore/html/cabo/
BNE Upload Staging Directory /tmp
*1058772.1*
Unset the 'BNE_UIX_PHYSICAL_DIRECTORY' profile option (null value is the default) and set other BNE profile options with the correct value
But anyways, I have checked both - setting and unsetting the profile options and bounced apache
But still not working
plz help

"Services Registry not configured" popup when trying to search SR

Dear Fellow VC 7.1 users,
When I try to use the search function on the services registry in VC for CE 7.1 EHP1 SP3, I get the "Services Registry Wizard" popup telling me that "Services Registry not configured." The original configuration was not done by me, so I cannot say whether or not it was done with the configuration wizards, but I can tell you what I have done to try to resolve the problem.
I have: configured the UDDI server; configured the Central Services Registry (ServicesRegistrySi), and ensured that the user the ServicesRegistrySiPort authenticates with has the roles SERVICES_REGISTRY_READ_WRITE and UDDI_TierN. I do not have an SLD configured in my CE 7.1 EhP1 environment, so I tried to follow the steps I found in an SDN how-to PDF doc that explained how to generate an SLD ID from the WSNavigator, but I was unable to do so because as soon as I clicked the "Service Registry" checkbox in WSNavigator, it threw an error message saying, "Cannot connect to Services Registry; check ServicesRegistrySi proxy definition settings."
What am I missing here? Any suggestions (or even hints) would be welcome.
Thanks,
Terry Barker

Thank you, Hezi, for your personalized attention. One month, a couple of WebEx sessions with Hezi, and one glacially slow customer message later, the problem is finally resolved!
Here's a recap of the resolution:
1. Through the WebEx sessions with Hezi, we determined that the problem was in the UDDI server setup, not in Visual Composer.
2. I Opened a customer message and got hooked up with my new best buddy, Hristo (in SAP Bulgaria?). Hristo logged into our CE 7.1 system using WTS (Windows Terminal Services) Over the course of a couple of weeks and several WTS sessions, Hristo found that the standard, recommended ServicesRegistrySIPort End Point URL did not work in our system (for an unexplained reason). Hristo gave me the following incomprehensible URL to use instead:
http://rnosappis1.igtsap.ad.igt.com:50000/sapws/sap.com/tc%7Eesi%7Euddi%7Esr%7Ews%7Eear_tc%7Eesi%7Euddi%7Esr%7Ews%7Eejbm_EJB_ServicesRegistrySiPort/ServicesRegistrySi/ServicesRegistrySiPort (You can find documents on SDN explaining the configuration of which I speak.)
3. That got us past the "services registry not configured" error in VC, but a service registry search in VC found no services. In addition, we were now not able to publish any new web services in the registry.
4. The next problem Hristo found was in the UDDI_DESTINATION and CLASSIFICATION_DESTINATION URLs. Ours were set up to look at SAP's public registry. I set them up according to the how-to documents I found on SDN. That got us past the "can't contact server" message to a new "web proxy authentication" error when trying to publish a service.
5. The first problem with the publishing was the need to use fully qualified domain names in the WSDL URL. At first I used just "hemxintf-p" but I really needed to use "hemxintf-p.he.ad.igt.com".
6. The second problem here turned out to be a mistake on my part when setting up the exclude list on the HTTP Proxy setup in NWA. The exclude list tells the system NOT to use the HTTP proxy when contacting certain (presumably internal) domains. I had used commas to separate the domains in the exclude list; as it turns out, you must use the vertical bar character as the separator.
After all this, along with frustration bordering on desparation, I can now publish web services in the SR, browse and test them in WSNavigator, and search for and use them in Visual Composer. I hope that my detailed description of the resolution in my case might save others from suffering similar frustration. Thank you, Hezi. Thank you, Hristo. Thank you, God! I can now get on with my life!
Cheers,
Terry

NTLM domain not configured

I need my Lion Server to share a folder out to about 30 PCs and Macs of various vintage and OSes.
I'm having major trouble with failures to log in from windows despite SMB being enabled in the Server App's File Sharing Pane.
The error that is ubiquitous is NTLM domain not configured.
I found a post telling me to change the NETBIOS computer name to a good token and then use that with the Windows authentication dialog like a domain name. eg, domain called "harbor", set NETBIOS to "HARBOR" and use HARBOR\steve as the log in user.
This has sort of worked, but the netbios name isn't sticking through server reboots.
Furthermore, this authentication approach seems to break. I don't know what is triggering it, but once it goes, the log I get from
sudo cat /private/var/log/krb5kdc/kdc.log
is fire with NTLM domain not configured errors from the now broken mapped network drives.
I read another post telling me to turn off AFP sharing. I'm trying that now, but "really?"
Can anyone help me get to the bottom of this? Everyone connected to this network can be trusted to have share level access, but I'm probably never going to be able to disable all authentication.
Thanks for any thoughts.

Populating the NetBios and workgroup names appears to make a difference when a Windows machine fails to log into the Mac over SMB.
I should note that some non-Windows devices that connect to the Mac over SMB may not trigger this problem: I've successfully used ES File Explorer from several Android devices to connect to the same Mac that I couldn't connect to from a Windows machine until I populated the NetBios and workgroup names.

Device not configured?

hi
ive recently downloaded firefox 2.0 and some openoffice onto my ibook, but when I try to launch the .dmg files i get a 'device not configured' error message. can anyone help? apologies if this is far too easy.
thanks in advance
john

Not sure about FireFox specifically, but .dmg files should open and expand/mount automatically when you double-click on them. Make sure FireFox completely downloaded the file, and use Get Info from the File menu to check permissions to make sure you have read/write access to the file. If that doesn't work, try launching Disk Utility to see if it will recognize and mount the file from there, or see if you can verify the CheckSum (basically make sure the file is not corrupt).
Other than that, I'm stumped.

OSB Error in Eclipse: The JCA dependency is not configured.

Hi All,
I am trying to use db adapter in OSB and I created the adapter in jdev and imported it in Eclipse.
I have installed Weblogic,OSB and configired the domain for osb, I can login to OSB and weblogic console.
I followed these steps to get there and now the db.jca file shows errors The JCA dependency is not configured.
http://guidoschmutz.wordpress.com/2010/08/08/oracle-service-bus-11g-and-db-adapter-a-different-more-integrated-approach/
Few of the things I noticed:
when I tried to copy the adapter from eclipse/plugin/*.jca/Dbadapter to Jdev/integration/lib/Dbadapter
I dint find one in eclipse/plugin/*.jca/Dbadapter
I created a OSB Configuration Project and not sure if it was created correctly and affecting this, as a matter of fact
are there any configurations I am missing to start.
I have like tight schedules and would really appreciate any help.
Thanks a lot again..

Yeah I checked that the wsdl is present.
One more thing I am noticing is the wsdl created in Jdev 11.1.1.4 doesnt show the binding and port when imported in the OSB Project resources.
Is there a way we can fix this?
Thanks.

What does 'Appliance Error (configuration error) Your request could not be processed because of a configuration error: account is disabled' mean?

All of a sudden Safari on my MacBook Air won't let me do anything. I have a Mac OS X Version 10.7.5.
As soon as I open Safari, a message comes up straight away saying 'Appliance Error (configuration error) Your request could not be processed because of a configuration error: account is disabled'.
I also can't check for system updates because of a 'network error' and can't connect to the App Store.
My internet is working fine and safari is working fine on both my iPhone and iPad.
I've never seen this message before and I'm not having much luck in searching for an answer.
This may be a silly question, I don't know, but does anyone have a solution?

Back up all data.
From the menu bar, select
 ▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens.

"Error [10151] The LCP Port on CCM Admin for Mobile Agent is not Configured or misconfigured"

We are running into a problem which we have noticed on UCCE 8.5 and havent seen on earlier 7.5 release.
If we setup a CTI port as agent device target and if we try to login the agent using Cisco Desktop (Not CAD, just CTI OS Client) then we get following error:
"Error [10151] The LCP Port on CCM Admin for Mobile Agent is not Configured or misconfigured"
But this wasnt the issue with 7.5 and we were able to do agent login with CTI Port as device target. We dont intend to use Mobile Agent feature but just login UCCE agent to CTI port as the device.
Do we know if this is a known issue or if something has changed between 7.x and 8.x release which could be is causing this?

So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

Error with Transport system not configured that may be related to CHaRM

Who has in depth knowledge on setting up SAP Solution Manager CHaRM. Had an odd problem with the transport system failing when the QA system was shut down for maintenance. Transports were not able to be created or save to. Error message was Transport System not configured. Brought up QA and re-distributed system and Transport group and transport requests started working again.

Hello,
if a system, e.g. QA system, will not be available due to a maintenance task,
we set the status of this system to "temporarily inactive" (see header data in transaction SMSY).
This status allows us, to create new transport requests in DEV-System although consolidation system QA is not available.
(Of course you have to reset the status, when QA-system ist started again.)
Hint: it is not possible to release or to import a transport request, when consolidation system is shut down.
Therefore the developer should pay attention to the messages, which raise in urgent corrections.
best regards
Horst

Generated Proxy Error: System not configured as XI Integration Engine

Dear all,
Using transaction SPROXY I generated a proxy on a Message Interface.
This generated as well a method and the associated class.
When I run it, trying to send data through all this, I get the following error:
System not configured as XI Integration Engine
Here is the model I got on another thread, in order to catch the error text:
DATA: l_sys_exception TYPE REF TO cx_ai_system_fault.
*...proxy call
catch CATCH CX_AI_SYSTEM_FAULT into l_sys_exception.
write: l_sys_exception->errortext.
Anyone has any idea where this error commes from?
I am mostly wondering whether the problem comes from my outbound system or XI configuration?
Thanks a lot, have a nice day!
Isa.

check this thread
https://forums.sdn.sap.com/click.jspa?searchID=2727912&messageID=1877263

Error: System not configured as Integration Engine

Hi ,
I was trying to simulate the following scenario in SAP XI:
HTTP--> SAP XI --> (RFC/BAPI)SAP R/3
Let me clear what i did.
I have to call a BAPI using RFC adapter in XI to display some information on a request of some Http app.
1. I have Imported the RFC BAPI into IR.
2. I have created the XSD files for http Re and res messages.
3. I have created the XSLT mapping programs and put them in a zip file and imported into IR.
4. I have created a Interface mapping and assign the created messages and mapping programs.
5. In ID i have created a Business service for my web application.
6. Receiver determination created in Id and Interface determination and receiver agreement in ID and activated the changes.
7. I have tested the same by sending the request from my web application to xi plain http adapter as follows:
http://grserver:8000/sap/xi/adapter_plain?bs=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
and in the result i have got the following error:
"System not configured as Integration Engine"
but i have tried it many times and some times it gives me correct results but after that the same error ios coming.
so can you tell me what could be wrong in the configuration of XI of what is the solution for this problem.
Reagrds
Gopesh Kumar Agarwal

Hi,
What is the version of XI you are using? If u are usign XI2.0, ur URL is correct. But if you are using XI3.0 then use service=<SENDERSERVICE>instead of
bs=<SENDERSERVICE> parameter in your URL.
bs is replaced by service in XI3.0
Your URL will be http://grserver:8000/sap/xi/adapter_plain?service=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
Hope this helps you.
Cheers,
Siva Maranani.
Message was edited by: siva maranani
Message was edited by: siva maranani

BNE_UIX_PHYSICAL_DIRECTORY is not configured error in R12

Similar Messages

Maybe you are looking for