BO 4.0 Content Migration - Universe not Found

Good Day Experts!
I'm about to quit my job and open a beach bar in Hawaii - please help.
We're in the process upgrading to BO 4.0. Installed the software (base and patch 8) successfully on our new production server - migrated our content successfully with the upgrade manager from our old production box to the new production box - changed the links and ALL is fine.
We completed the same steps above for our dev server - base installation and patch 8 is successful and content was migrated to this new dev server - BUT - for some unexplainable reason - we cannot refresh data in our dashboards and webi's - and get an error that says "Document failed to load - Universe not found". When you go into Universe Designer and CMC - all universes are there :(............We decided to REMIGRATE the content to this dev server.
This migration is now FAILING - The upgrade manager completes all steps except the last step: Committing Objects and returns an error: "The upgrade process has been interrupted by an error: Cannot find the user, group or object 10672. The server supplied the following details: OCA_Abuse exception 4 at exceptionmapper.cpp:79. Cannot find the user, group or object, canu2019t get applicable rights"
Your assistance and advice on the above will be MUCH appreciated.

You need to find out what is object 10672 !
You can do this in Query Builder of your source system. With query like select * from ci_infoobjects, ci_systemobjects, ci_appobjects where si_id=10672
As to the original error of not found universe - it might be due to the fact that in this source env (dev) your dashboards and reports do not have a proper link to universes... After migration have you tried to edit reports and point them to the right universe, refresh and re-publish ?
If your prod migration was OK, why not use BI4.0 prod env as template for your dev and move its content to your dev BI4 using LCM and start BI4 dev process from that ?

Similar Messages

"Universe Not Found"

Hi all,
I am migrating Bo 6.5 to XI 3.1, After migrating the reports from deski to webi while refreshing the webi report i got one error message "Universe not Found", I would like to know what are all the possible cases to get this error .
I find it out if there are any linked universe's in that time we will get it .
But i want all the possible cases ...........PLZ.........
Could any please reply <REMOVED_BY_MODERATOR>.
Thanks
Santhosh V
Edited by: Pravender on Oct 29, 2010 12:02 PM

Hey here,
Choice>>1
In that case you have to go with Web Intelligence Rich Client tools Santhosh V.
Windows based Application and Which will carries almost all the functionalities of DeskI.
I mean you have to create them in BOXI 3.1 (WRC) and Export the reports to repository. To view them from Infoview.
Choice>>2
Develop them in DeskI (if User wants them to see in DeskI only) on BOXI 3.1 & export.
Choice>>3
Design Universe for that (Personal DP's) and Point the Universe for existing reports(DeskI) & now Use Import wizard to migrate them to BOXI 3.1.
Hope it clears all your doubts.
Gracias...!!

WEBI Error " Universe not found"

When refreshing a webi report from infoview on QA client I get the following error; Universe not found, see your business objects administrator (Error: WIS 00501).
Anybody with a suggestion please help

Hi,
When using the migration wizard, you may experience this error when trying to run a Web Intelligence report.
u201CUniverse not found (Error WIS 00501)u201D
One quick solution that seems to work for me is that you need to:
1. close the u201CUniverse not found (error WIS 00501)u201D error message
2. Save the webi report
3. close the browser
4. Re-open the report and try again
Also try changing the user preferences and check u201Cno default universeu201D and that may allow the report to work.

Universe not Found ... (Error: WIS 00501)

Hi experts
At a certain point in time, a pretty complex WebI report lost its connection to the universe... I got following error message:
Universe not found. See your Business Objects administrator. (Error: WIS 00501)
What can I do to fix this. Other reports on that Universe seem to run fine... Only one report fails. Funny that also all other versions of that report seem to have te same problem... (I kept all versions between blanco and the actual report during development) This is the second time I have this issue, last time I rebuilt the whole report...
Any ideas ?
Thanks in advance !!
P

Well, I do not think there is a specific document, but if you read Admin guide, upgrade guides/import wizard guides you'll see that the product relies heavily on CUID persistance. Once object is created and linked to other objects, like universe and its reports - those CUID's have to stay the same for product to work correctly.
CUID changes if you copy object , then delete original
if you delete original and create new one with same name.
If you save universe without security(for all users) and then export it back into enterprise...
So you have to create process during your development that ensures CUID of universes stays the same.

Universe not found. See your Business Objects administrator (Error: WS 0050

Hi guys,
After assigning the user authorisation in BO the user receive the following error when running the Webi reports. Please assist.
Other users with different authorisations do not receive this error.
universe not found. See your Business Objects administrator (Error: WS 00501)

Hi,
looks like the user doesnt have the right for the universe. Did you set the right on universe level or on folder level where the universe is stored in?
Regards
-Seb.

Universe not found(contact BO administrator)

Hi Every Body,
I log on to WEB INTELLIGENCE RICH CLIENT on my desktop.When i try to run the report it is showing error as "Universe not found(contact BO administrator)".Could you help what might be the reason for this error.
Regards,
Swapna.

Hi Swapna,
What I think might have happened here is that at some point you associated the WebI report with a local copy of the universe.
When you do a save as... it will be treated as a new universe.
Also it will move physically to a different location.
Now when you export the universe later and BO detects the universe is already there, you will be asked if you want to overwrite that universe.
If you say yes the universe will move again physically from the 'local universes' spot to the 'CMC universes' spot.
So if you created or ran your WebI report on the local universe, it will still try to look for that, cannot find it and raise the error.
On a different PC you will not have touched the WebI report and it will be still pointing to the CMC version of the universe, if there is a newer version it will get imported and the report will run as usual with the new version.
So some advice given before is solid. It helps to just clear the user directories of universes and webi reports and import them fresh when you need to. A little caution with just deleting since there might be work that isn't exported yet.
So what also helps is to just point the user directories to a different spot, so you can always fall back on the original versions too.
Clear the universe copy and webi document, or point to fresh directories,
import the webi document and it will import the associated universe if you run it,
just like it did on the fresh different pc.
Good luck,
Marianne

JCAPS6- Migration "Method not found in the imported class"

Hi,
I work on Jcaps6 migration, I found that few of my migrated Jcd's throw compiler error as here
ERROR: Method getSegmentCount(java.sql.Connection, java.lang.String, java.lang.String) not found in class com.ack.mware.distribution.v2.filesplitter.InhouseFileAggregator at line 76
This happens to all the methods in the InhouseFileAggregator class which is our inhouse class comes with a jar file.
it seems like the methods in this class are not recognized by the main class which throws the abovesaid errors.
I have checked for the jar file which is found to be added and aslo I have checked with the eDesigner 5 which compiles without any error.
So I doubt this may be due to some compatible features with the JCAPS6 version.
Please someone help me to solve this issue. All the Jcd's are facing the same error due to this non recognizable inhouse API's.
Thanks in advance
Regards
Preethi

Hi Chris,
Thanks for the reply.
Here is what I do,
I did import the project into the JCAPS6 and I have checked for jar files (inhouse).
I dont see any error mark on the import statements, but the methods in one of our inhouse class are not recognizable by the main class where it uses those mehods to process the query statements.
The main class have imported four inhouse classes, only one class has this problem the others are working fine.
FYI,That inhouse class is an abstract class consists of four static methods with its implementations.There are no abstract methods.
we have our inhouse stuffs in utitlities package ,so I have included the corresponding jar files in the JCD.
I am really stuck at this, Please tell me what's going wrong here.
Regards
Preethi

Content Manager File not found Error

Hi
We have a 3442 IP/TV Server running IP/TV version 5.2 and CE 566 running ACNS 5.2. I can view the Scheduled Live Capture from a VCR connected to the IP/TV Server program from the IP/TV Viewer. But when I create an On Demand Program and try to view it from the IP/TV Viewer, get an error "File not found in Content Manager Database". The Content Engine is running in the program manager mode. Am I missing something here? I'd appreciate assistance with this issue. Thanks.

Check for the follow links for more details on IPTV.
http://www.cisco.com/en/US/products/hw/contnetw/ps1863/products_installation_and_configuration_guide_book09186a00801e8b07.html
http://www.cisco.com/en/US/products/hw/contnetw/ps1863/tsd_products_support_series_home.html

Exchange 2003 to 2010 Migration Mailbox Migration "Object not found"

I am introducing an Exchange 2010 Server to a single server Exchange 2003 organization. I have HT, CAS and MB roles installed already on 2010 w/ SP1. Prepped the Schema, AD, Domain and LegacyExchangePermissions by using the setup.com of the SP1
installation files.
Right now, when I try to initiate a New Local Move Request on 2010 EMC for a mailbox on Exchange 2003, I get an error for all the users saying "Object not found" with a white X in a red circle. I'm not sure what to do at this point to get Exchange 2010
recognize the 2003 mailboxes. Any ideas?
Thank you,
-S

Tim,
Here is what I'm getting from ExBPA:
Error Offline address book replica not found Organization CGU Didn't find a replica of folder 'OAB Version 4' for offline address book 'Default Offline Address List'. Either a replica doesn't exist, or this folder hasn't been created yet. If an OAB generation
attempt has not yet been made, you can ignore this error.
Error Couldn't find any writeable domain controllers Admin Group Exchange Administrative Group (FYDIBOHF23SPDLT) There were no writeable domain controllers found in Active Directory site 'Default-First-Site-Name'. At least one writeable domain controller
is required for Exchange to function properly.
Error Database backup critical Admin Group Exchange Administrative Group (FYDIBOHF23SPDLT) Database 'Public Folder Database' on server EXCH-2010 has never had a full online backup.
====
And this is what happens if I put go ahead with the move request
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:00
Test User
Failed
Error:
Mailbox database "EXCH-01\First Storage Group\Mailbox Store (EXCH-01)" doesn't exist.
Click here for help...
http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.140).aspx?v=14.1.218.11&t=exchgf1&e=ms.exch.err.Ex23B42B
Exchange Management Shell command attempted:
'cgucpa.com/Users/Test User' | New-MoveRequest -TargetDatabase 'Mailbox Database'
Elapsed Time: 00:00:00
Thank you for your help,
-S

Content Exchange menu not found in KM

Hi All
I am trying to import home_area_content_templates_fullupdate.zip file. As per documentation of Importing an Offline Package it is saying there will be a menu Content Exchange under Content Management. I could not find Content Exchange menu. I have already activated Content Exchange Service.
Please Help.
Thanks in advance .
Raktim
Message was edited by: Raktim Banerjee

Hi Stefan
Thanks for ur reply.
I can see Content Management menu . Under that I can see
Form-Based Publishing
Global Services
Protocols
Repository Filters
Repository Managers
Repository Services
User Interface
Utilities
connection pools
But I cannot see Content Exchange Menu.
I have assigned ContentManager role to thr user also.
Thanks
Raktim

Help on Content html file not found

All,
We are using Hyperion Designer 8.5. When I click on the F1 (Help on Content), I am getting the following error message:
C:\Program Files\Hyperion\Client\Samples\file:\c:\Program Files\Hyperion\HPSu\Client|Program\BrioHelp\briohel.htm?
context=GETTING_STARTED&topic=Query_section contains an incorrect path.To fix this problem, I looked for setting the location of files. From the main menu, I clicked on 'Tools', 'Options' and 'Program Options'.
From the Designer Options dialogue box, I clicked on the 'File Locations'. Even though I have found the location of the help file, but
there are four choices under File Locations none of which is related to the help. Available file locations are:
Documents Directory:
Default Connection:
Preferred Repository Connection:
HTML Template Directory:
How can I fix the path for running help?
Thank you in advance,
Seyed

Moving a library from machine to another can require some preparation if it is to go smoothly.
If you still have access to a working library on the original computer I can help you do the transfer again. Alternatively, as long as the files are organized within a media folder in a way that is vaguley consistent with iTunes, i.e. folders for artists, with subfolders for albums, then my FindTracks script might be able to relink the files.
tt2

ZRS: Universe Not Found Error

I have a customer who recently has started to see the error "U niverse not found. See your Business Objects administrator. (Error: WIS 00501)" when trying to run and existing report or create a new report. The primary server supporting ZRS has been rebooted to no effect. The one TID on the topic in the Novell Knowledgebase (7009370) notes a problem with insufficient free space on the drive where ZRS is installed; the customer reports 130 GB free on that disk - seems like that should be sufficient.
Notes on solutions discovered by other readers would be most appreciated.

I found a solution that worked for me:
http://www.novell.com/support/kb/doc.php?id=7011400
Just run "novell-zenworks-configure -c UpdateBOE" on the reporting server.
/John
>>> On 2012-11-20 at 16:46, in message
<[email protected]>,
hajo68<[email protected]> wrote:
> I'm having the same problem. Just updated our zenworks environment to
> 11.2.2. Our reporting server runs SLES 11 SP1 and have 17 GB free disk
> space.
>
> John Hallberg
> Jonkoping University

"Content Agent server not found"

I keep getting this message anytime I try to submit a distributed processing job. I've set up my clusters all kinds of different ways and continually get this error. What does it mean?

Well I can see that this is no help either as I am not getting a response here nor any help with this matter. I will not bother you again and I will now stick to internet explorer to connect me to the internet. Thanks anyway. Bye.

Method not found: 'Void CrystalDecisions.Shared.ReportStateInfo.set_DataSou

We have a VB.NET project which has recently been migrated from Visual Studio 2003 / .NET 1.1 and Crystal Reports 11 to Visual Studio 2010 / .NET 3.5 and Crystal Reports 2008.
One of the forms uses the crystaldecisions.windows.forms.crystalreportviewer control, and at the point of trying to display a report, pops up the following error since the migration:
Method not found: 'Void CrystalDecisions.Shared.ReportStateInfo.set_DataSource(System.Data.DataSet)'.
All other Crystal Reports functionality is working fine. As far as I can see, the control being used is version 12.0.2000.0 (although 12.0.1100.0 also seems to be available, and suffers from the same problem). All of the Crystal Reports references in the project point to files in C:\Program Files\Business Objects\Common\4.0\managed and are version 12.0.1100.0.
Has anyone else encountered this problem? Are the wrong versions of the control / DLLs being used? Any advice on how to get this working would be useful!
Thanks in advance,
Anthony.

Sorry, answering my own question!
I've since discovered the .NET 2.0 DLLs in C:\Program Files\Business Objects\Common\4.0\managed\dotnet2 (i.e. version 12.0.2000.0) - switching the references to them fixed the problem.
Anthony.

File not found error after database migration

Hi experts
I recently decided to create a test environment for SharePoint 2010 production server but after
attach the content database using power shell successfully I get “ file not found “ error when I try to login the top site collection
I think it’s because of customized master page in production site which I don’t know how to apply them to my new environment.I even tried to copy the master pages from cataloge throught SPD but it didnt work.
Any assistance would be greatly appreciated

HI Shahin,please try to access the site by below and let me know the result.please check the below link that gives more idea on the issue
_/_layouts/settings.aspx
/_layouts/viewlsts.aspx
/default.aspx
http://expertsharepoint.blogspot.de/2014/01/sharepoint-default-page-not-loading-by.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

BO 4.0 Content Migration - Universe not Found

Similar Messages

Maybe you are looking for