BODS IN RUN MODE RESULTS DIFFER WITH DEBUGGER MODE

Hi Experts,
We start facing a strange issue, We have two flat files as a source and a SQL transforms, in order to join them we have some derived column such as generate_seq_num_by_group and we are joining the data based on that, when we are running the job it works extremely fine but while we start to run them we are getting some erroneous results.
Please suggest something. I have got some thing but there it says that it is an bug.
Please Help.
Thanks in Advance
Joy

The solution is of course to write out a table with the derived column appended, then do your join to that table.
We have all learned to work around this bug.  Sometimes it works and sometimes it doesnt.  Thats whats most frustrating about it.

Similar Messages

  • Stuck with run mode

    Hi
    I am stuck with run mode on one of my VI (I can't edit it or even see the diagram). here's what I verified
    1. tools>option>miscellaneous> I uncheck "Open VIs in run mode"
    2. I hit Ctrl+M, it is still in run mode
    3. I close LabVIEW and reopen, it's still in run mode
    4. I check the VI file type, it's not a read only
    Do u have any idea about how I can go back to edit mode to modify the diagram? I'm using LabVIEW 7.1
    Thanks

    Without having the VI in front of me it is difficult to say exactly what settings you have turned on.
    I would suggest trying the following things to get your VI out of run mode.
    1) Ensure that "Open VIs in Run Mode" is turned off in Tools->Options->Miscellaneous
    2) Open the VI by dragging it into another block diagram and double clicking on it
    3) With the VI open hold down control and press the '.' key. This is the same as pressing the "Abort" button.
    4) Hold down control and press 'M' to switch out of run mode
    If you can reproduce the behavior in a VI which you are able to post on the forum, I am sure we will be able to figure out what steps are needed to edit the VI.
    Scott Yellig
    Applications Engineer
    National Instruments

  • Can I set the "step run mode" -property with the property loader

    Is it possible to set the "step run mode"-property  by using the property loader to "Skip" , "Normal" or "Force PASS" ...in TestStand 3.0 ?

    I turned on Station Options>>Preferences>>Show Hidden Properties and then exported the Step.TS.Mode property to a limits file. I then added a PropertyLoader step and it functioned correctly. 
    Note that importing a hidden TS subproperty makes an edit to the sequence file, even if done at runtime. Thus if you later save the file, you might end up inadvertently saving the last imported values. This isn't necessarily a problem if the values in the file are always overwritten by a property loader step.
    (btw, I tested this in 4.0, but I'm hopeful it would also work in 3.0)

  • Change "Chart x scale maximum range" in running mode....

    Hi,
    I have a little problem for labview world, i use chart graph and  if user choose 100 meter for x scale range in running mode,  every time user must see last 100 meter on the chart x scale range in running mode. Also if user change x scale range for instance 200 meter in running mode, user can see last 200 meter every time.
    I did little labview .vi for this but my problem is that
    user choose: 100 meter in running mode (0-100 meter) 
    and chart value is 101 for x scale,  x scale is 100-101,100-102,100-103... so on no update other range (100-200) "ı dont do this....
    Thank you every one and i love labview by the way i added example coded for problem (labview 8.0), (block diagram explain problems with label) if u want u can see correct code solution.... 
    Solved!
    Go to Solution.
    Attachments:
    chart x scale max.vi ‏14 KB

    kacco wrote:
    by the way i wanna ask some question about event str. Why am i using time out terminal 50 milisecond? if i connect -1 while loop doesnt work, or if event str time out terminal is empty value, i see same problem(while loop doesnt work, chart is not running)
    but event structure can use empty value for timeout terminal..... this vi  no  What is the meaning of this????
    kudos is coming soon my friend this is good and very useful solution thank u.....
    The timeout terminal lets you perform an action at a prescribed rate.  If I didn't use it, the Event Structure would sit until a Front Panel control is changed; that would keep the Random Number function from adding to the chart.  I wanted a new random number to continually add to the chart so I put it in the Timeout case.  I used 50 ms, instead of your 150, because I wanted it to run faster.  Not wiring something to that terminal results in the default value (-1) being used which makes it never time out, explaining why your VI doesn't work when you tried it.
    Jim
    You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

  • Run mode in exe build

    Is there an option to disable an exe from starting up in "run mode"? I'd like to be able to change my analog sample rate without having to stop and start the .exe initially.
    Solved!
    Go to Solution.

    glskinner wrote:
    I need to be able to change the sample rate via a control before I acquire data. I can set a default value but that will differ from instance to instance.
    This is the perfect instance to use a configuration file.  That way you can edit the config file (it is just raw text) and then run the program.  The program reads the config file and proceeds with the settings you specified in the config file.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • 2006 iMac running OS10.7.5 with File Vault problem stops boot up?

    2006 iMac running OS10.7.5 with File Vault problem stops boot up?  Upon login this message appears: Your home folder, which is protected by File Vault, didn't open. it needs to be repaired.
    It then asks:  To repair the folder and continue logging in press OK. To log in as a different user, click Cancel login.
    Clicking Ok
    You are unable to log in to the user account "xxxxxxxxxxx" at this time.
    Logging in to this account failed because an error occurred.
    When I click cancel to log in as different user I get he following message: You are unable to log in to the user account "xxxxxxxxxxx" at this time.
    Logging in to this account failed because an error occurred.

    This condition is quite difficult and time-consuming to recover from. If the procedure suggested here is too complicated for your experience level, get help from someone more experienced. One option is to make a "Genius" appointment at an Apple Store. Legacy FileVault should not be used under OS X 10.7 or later.
    If you have another user account with administrator status and can do so, log in to it and skip to Step 4.
    Step 1
    Boot into Recovery mode. The OS X Utilities screen will appear.
    Step 2
    Select
    Utilities ▹ Terminal
    from the menu bar. In the window that opens, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window opens. Select your boot volume if not already selected. Pull down the menu labeled Select the user account and select
    System Administrator (root)
    Follow the prompts to set a password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select
     ▹ Restart
    from the menu bar.
    Step 3
    At the login screen, click Other... Enter "root" (without the quotes) in the Name field, and enter the password you set in Step 4 in the Password field. You should now be logged in. Do nothing while logged in as root except as indicated below.
    Open the Users & Groups preference pane. Create a new user and check the box marked
    Allow user to administer this computer
    Restart and log in as the new user.
    Step 4
    Load this web page in Safari.
    Triple-click anywhere in the line below to select it:
    sudo dscl . -delete users/fubar HomeDirectory
    Copy the selected text to the Clipboard (command-C).
    Launch the TextEdit application. Paste into the window (command-V). Substitute the short name of the FileVault user for the word "fubar".
    Triple-click the edited line and again copy to the Clipboard.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window. When prompted, enter the password of the user you're logged in as.
    Step 5
    You should now be able to log out and log in as the FileVault user. Your files still won't be available. FileVault is inactive.
    Locate the disk image file named "fubar.sparsebundle" or "fubar.sparseimage" at the top level of your home folder. Again, substitute the short user name for "fubar".
    Step 6
    Try to open the file. If it won't open, try to repair it in Disk Utility. If it still won't open, restore it from your most recent backup. Keep trying older backups until you find one that works. If you don't have a backup, the data is lost, perhaps beyond any hope of recovery. There's a slight chance that you might be able to repair the disk image using an expensive third-party application called "Disk Warrior."
    Step 7
    Copy the files from the mounted disk image to the corresponding subfolders of your home folder. The Library folder is invisible in the Finder. Open it by holding down the option key and selecting
    Go ▹ Library
    from the Finder menu bar. Open the copy on the disk image by selecting
    Go ▹ Go to Folder
    and entering
    /Volumes/fubar/Library
    in the text box that opens. Again, substitute the correct name for "fubar".
    Log out and log back in.
    If there isn't enough disk space available to complete this step, unmount the disk image, copy the disk image file to an external storage device, delete the original, and try again.
    Step 8
    Back up all data, then delete the disk image file.
    Step 9
    Delete the user you created in Step 3, if applicable.
    Step 10 (optional, but recommended)
    Follow the instructions in this support article under the heading "Disable the root user."

  • Sorry, something went wrong - Open Office File from Search Results Page with Office Web Apps

    Hi,
    I'm getting "Sorry, something went wrong" error when I'm trying to open any office document from inside Search Results Page with Office Web Apps, the same error is appearing in the document preview as well.
    The error in SharePoint logs says that the file cannot be found.
    Please note that this error is coming only when the "Filename" of the document is not written in English (in my case its written with Arabic characters).
    If I try to open it from the document library, its opening properly with no errors.
    The only difference between two URLs (document URL in Search Results and in Document Library) is the value for "sourcedoc" attribute;
    In the case of Search Results page, the filename in "sourcedoc" attribute is kept as is with Arabic characters.
    While in the Document Library, the filename in "sourcedoc" attribute is converted into different characters (something like: "B9%D9%85%D9%8").
    Anybody have an idea on how to overcome this issue, implement a workaround or modify the "sourcedoc" behavior?
    Thanks in Advance.
    Hamza AlSughier

    Dear Wendy,
    Thanks for your efforts, I already tried your last suggestion before, but this didn't solve my problem.
    Actually my end users are accessing this portal using ADFS and HTTPS.
    Finally I got this solved, I have done below to get my overall solution working perfectly:
    - First I have configured Windows Authentication and ADFS Authentication on the same zone which is the default zone.
    - The issue when opening office documents with Arabic file name has disappeared as a result of first change.
    - Then I have faced an issue where we are not able to crawl content under Default zone, however we have to do so, after too many efforts, I found that its related to the Load-balancer/proxy, I have made the crawler server
    to crawl himself (http://CrawlServerName:PortNumber).
    - Also a change on Alternate Access Mapping was needed, I have set one of the extended zones (which is running Windows Authentication only) as Internal URL for the Default Zone, and this is was the URL I used for Crawling.
    I have configured Server Name Mappings to make sure we got proper URLs in Search Results.
    - Then we faced another issue, which is Authentication selection on login page (How to bypass this page, and authenticate using ADFS auto), I used this solution (Set Custom Sign In Page):
    http://0ut0ftheb0x.wordpress.com/2014/01/04/skip-the-authentication-selection-page-at-_logindefault-aspx-in-a-mixed-authentication-environment/.
    - I faced one more issue as a result of above workaround; Sign Out functionality wasn't working well; users get logged in automatically whenever I click on Sign Out. I solved this by modifying the "Sign Out" Control under _layouts;
    I made it to redirect users to ADFS Sign Out Page instead of SharePoint Sign Out Page (I know its not recommended, but I don't have any other option).
    Hamza AlSughier

  • How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

  • Run BI Publisher report (with Excel template) on Windows 7

    Hi, All.
    Sorry for my English :)
    I have some problem:
    I use BIP standalone for my reports. Some reports are in Excel (with Excel template). When I run it on PC with WinXP - all is OK. But, when I try to run it on PC with Win7, then Excel is opening and writing this "Native file format and file extension does not mismatch. Before open be sure of file does not damage" (this is my translation). If I try save file on the hard disk, then file is 0 kb. But if a report has RTF-template, then it opening normaly on Win7's PC.
    Have you any ideas?
    Thanks!

    option1:
    The query should be same @ detail level, only the template has to be different for summary and details.
    @runtime, user can choose to see the detail/summary
    Disadvantage, if the data is huge,
    advantage , only one report.
    option2:
    create two separate reports summary and details
    and create diff data and diff layout and keep it as different report
    Advantage, query will perform based on the user run report, summary/detail, so that you can write efficient query.
    Dis advantage , two reports query/template to be maintained.

  • Error While trying to run Project : Unable to start debuggeing on the web server . The project is...

    Hello There 
    i have created Project with Visual Studio 2003 and when i try to run my project i faced this problem .
    i was search about it and read all solution that related to this problem but no luck 
    so please any help will be appreciated
    Mohammad Khader IT-Technical Support

    Well, you would have to go to the Web.config and enable debugging.
    http://ppe.blogs.msdn.com/b/zainnab/archive/2010/12/14/enable-debugging-in-web-config-vstipproj0026.aspx
    Then you have to know how to Attach to the ASP.NET Worker Process w3wp.exe. All ASP.NET solutions run on the ASP.NET Worker Process thread on IIS, which means that the ASP.NET program must be already running before you can Attach the Debugger to ASP.NET
    Worker Process. You set a breakpoint I the codebehind file, you attach the debugger to w3wp.exe and you hit the Run with Debugger button. 
    http://www.codeproject.com/Articles/37182/Debug-your-ASP-NET-Application-while-Hosted-on-IIS

  • Looking for an SQL query to retreive callvariables + ECC from a RUN SCRIPT RESULT (Translation to VRU)

    Hi Team,
    I am looking for an SQL query to check the data (ECC + CallVariable) received following a RUN SCRIPT RESULT when requesting an external VRU with a Translation Route to VRU with a "Run External Script".
    I believe the data are parsed between the Termination Call Detail + Termination Call Variable .
    If you already have such an SQL query I would very much appreciate to have it.
    Thank you and Regards
    Nick

    Omar,
    with all due respect, shortening a one day's interval might not be an option for a historical report ;-)
    I would recommend to take a look the following SQL query:
    DECLARE @dateFrom DATETIME, @dateTo DATETIME
    SET @dateFrom = '2014-01-24 00:00:00'
    SET @dateTo   = '2014-01-25 00:00:00'
    SELECT
    tcv.DateTime,
    tcd.RecoveryKey,
    tcd.RouterCallKeyDay,
    tcd.RouterCallKey,
    ecv.EnterpriseName AS [ECVEnterpriseName],
    tcv.ArrayIndex,
    tcv.ECCValue
    FROM Termination_Call_Variable tcv
    JOIN
    (SELECT RouterCallKeyDay,RouterCallKey,RecoveryKey FROM Termination_Call_Detail WHERE DateTime > @dateFrom AND DateTime < @dateTo) tcd
    ON tcv.TCDRecoveryKey = tcd.RecoveryKey
    LEFT OUTER JOIN Expanded_Call_Variable ecv ON tcv.ExpandedCallVariableID = ecv.ExpandedCallVariableID
    WHERE tcv.DateTime > @dateFrom AND tcv.DateTime < @dateTo
    With variables, you can parametrize your code (for instance, you could write SET @dateFrom = ? and let the calling application fill in the datetime value in for you).
    Plus joining two large tables with all rows like you did (TCD-TCV) is never a good option.
    Another aspect to consider: all ECC's are actually arrays (always), so it's not good to leave out the index value (tcv.ArrayIndex).
    G.

  • Is it possible to run an IdocScript Query with Service GET_SEARCH_RESULTS?

    Hi All,
    I need to run the below query with GET_SEARCH_RESULTS service.
    dDocType <matches> `ArchivePackage` <AND> xSubmissionDate < `10/08/13 11:03 AM`  <AND> xArchiveDocName <EQUALS> dDocName
    Part of this query works fine but when the part in BOLD is also used I get an error, reason being there is nothing like <EQUALS> when using QueryBuilder
    Instead is it possible to run the below idocscript with any service?
    <$ (dDocType like 'ArchivePackage') & xSubmissionDate < dateCurrent(-365) & (XArchiveDocname == dDocname) $>
    I tried it with GET_SEARCH_RESULTS, but got wrong results and no error.
    Is this even possible or should I just change my approach?
    Regards

    I tried to search more info on this one. It is true that in all cases the operator is followed by a constant - see e.g. https://blogs.oracle.com/interactions/entry/ucm_get_search_results_with_full_text_search
    Honestly, I see no reason why a reference to another metadata could not be made, but the parser might just fail on it. If you can, try to get an official answer from support via Metalink. Alternatively, you can decompile the code processing the service and check why parsing fails when non-constants are used.

  • Labview opens all VIS in Run mode

    LV2013 PDS is opening all VIs in Run Mode.  This is a global problem, not specific to one or a specific number of VIs.
    If I create a new VI, save it, close it and re-open it, it's in Run Mode, not Edit mode.  Nothing is set to Run When Opened, nothing is set to be locked without a password.
    It's only on this installation; if I take my code to another machine, there's no issue.
    I have deleted the labview.INI file, but the behavior repeats itself.
    Any ideas?

    Jed_Davidow wrote:
    SCC is not configured; I use perforce, but it's not configued to use it or to treat read-only as locked.  I have also checked out all the filed ahead of time with P4, so LV never sees them locked.  The folders themselves are not read-only.
    Also, I have created VIs outside of my P4 folder, and I have the same trouble.
    Example:
    Launch LV:  Create a blank VI (comes up in Edit mode).
    Save to Desktop (not within P4 control) as test.VI
    Close
    Open test.VI ---> It's in Run Mode
    I have never seen this happen before.
    Neither have I 
    I'll assume a reboot was attempted and did not change anything.  I would attempt a repair of LabVIEW from the control panel and another restart. 
    Jeff

  • Material Replication from R/3 to SRM -  Object status stuck in Running mode

    Hi Experts, I am new to this Forum and I am facing the following issue,
    System Info :
    SRM 5.0
    ECC 6.0
    I am trying to replicate two materials from the backend R/3 system and have set material filters on the SRM side.
    The filters are Table: MARA, Field: MATNR, OP= Equality(=low), LOW = T-SRM13, inclusive defined.
    The filters are Table: MARA, Field: MATNR, OP= Equality(=low), LOW = T-SRM113, inclusive defined.
    This is my sequence of operations in SRM:
    I deleted exisiting queues, started initial load and then activated the inbound Queues for my client.
    Then when checking, Monitor Load objects in SRM, the status for Material is stuck in Running mode with an yellow sign.
    Please let me know if you have any advice.

    Hello,
    First of all, check RFC queues in transatcion SMQ1 and SMQ2 for any detailed information.
    Make sure if Your RFC user has SAP_ALL authorisation - if not add it and delete all material queues and run again.
    Make shure if You run report BBP_PRODUCT_SETTINGS_MW with proper option and unchecked "Test mode". Once you have done this rerun your initial load for DNL_CUST_PROD0,  DNL_CUST_PROD1, BASIS3 and MATERIAL.
    Regards,
    Marcin Gajewski
    Please reward points for helpful answers.

  • SAP BW 7.4 - Web results differ from RSRT (HTML) results

    Hey Guru´s
    We are running SAP 7.4 under SP7. When we execute queries in web environement (IE, Chrome, etc) the results do not match the data in the cube. Furthermore when running the same query under RSRT using the HTML option, the results are correct. Has anyone encountered this issue? If so, what were the correction steps?
    Below our SPs.
    SAP_BASIS 740 0007 SAPKB74007
    SAP_ABA 740 0007 SAPKA74007
    SAP_GWFND 740 0007 SAPK-74007INSAPGWFND
    SAP_UI 740 0009 SAPK-74009INSAPUI
    PI_BASIS 740 0007 SAPK-74007INPIBASIS
    ST-PI 2008_1_710 0009 SAPKITLRE9
    BI_CONT 757 0002 SAPK-75702INBICONT
    BI_CONT_XT 757 0002 SAPK-75702INBICONTXT
    SAP_BW 740 0007 SAPKW74007
    CPMBPC 810 0002 SAPK-81002INCPMBPC
    POASBC 100_731 0005 SAPK-10205INPOASBC
    HANABPC 810 0002 SAPK-81002INHANABPC
    Thanks,
    Alex

    The difference is exclusive to the values. Column and line layouts are ok. The values in the web environment are plotted randomly in wrong columns and possibly lines.
    Also the result differs when filtering a single item (0sem_posit in this case). In other words, when running the report with all item the line for a specific item shows one result, and when filtered to that item, the result is different. The query is not input ready either.
    We are running under dev environment with a SAP_ALL user, authorization should not be an issue. The selection under both executions (RSRT and Web) are exactly the same.
    The original query has selection on hierarchy nodes and hierarchy is active under drilldown. Created a test query removing all user-exit variables and hierarchy, cleaned the cache, but the problem persists. It seems that it may be related to the Java/Webdynpro componentes used in the front-end.
    Regards,
    Alex

Maybe you are looking for