BOM Effective Date

Hi,
I am running into a strange problem in the BOM form. I put an effective end date of today for a component but when I post production, it still relieves the item from inventory.
Also, out of four component items for this particular FG, all but one are relieved and this is the one without an effective end date.
Please HELP!!!!
A/A

Hello,
Since BOMs are maintained with history, meaning system tracks the shape of BOM changes through time,
I think you should check what type of BOM is associated to your production details.
If you are referring to discrete job, then it might be the fact that the BOM date is older than the effective end date.
In that case, you'll need to update the BOM date before performing production.\
Hope this helps,
If it does please mark it,
Aaron

Similar Messages

Different Effective Date in One BOM with only ONE Change Number

Hi gurus
here is my complete question?
Is it possible to realize this function that Different Effective Date in One BOM for different BOM items with only ONE Change Number?
Thanks for your information/help in advance.

Dear Zhao,
Using One change number it's not possible to define a different valid from date for the BOM changes of a single material BOM.
In case if the same change number is used for making different material's BOM component,then a different valid from date for
each BOM can be defined,but at any given point not for each component/item level of the same BOM.
Check and revert back.
Regards
Mangalraj.S

Setting Configuration effective date to promise date

in order management there is a system parameter OM: Configuration Effective Date, which can be set to 1.Model creation Date, 2.System Date till Booking, 3.System DAte date till Pick Realease. How can i set this parameter or the configurator model lookup date and effective date to the entered promise date?
So that every time the configurator is launched it considers the promise date a s the model lookup date and for configuration vaildation as well as BOM validation?

well how about using the following procedure?
1.CZ_CF_API.DEFAULT_NEW_CFG_DATES(p_creation_date IN OUT NOCOPY DATE,
p_lookup_date IN OUT NOCOPY DATE,
p_effective_date IN OUT NOCOPY DATE)---- For new configuration
2.CZ_CF_API.DEFAULT_RESTORED_CFG_DATES(p_config_hdr_id IN NUMBER,
p_config_rev_nbr IN NUMBER,
p_creation_date IN OUT NOCOPY DATE,
p_lookup_date IN OUT NOCOPY DATE,
p_effective_date IN OUT NOCOPY DATE)---- For Restored configuration

Effective date in ECN

Dear Sir,
How we can maintain effective date( validity Date) in one ECN.
For example- BOM "A" is having X,Y,Z item
X has the validity date- 13.02.2009 to 31.12.9999
Y has the validity date -13.02.2009-20.02.2009
Z has the validity date - 13.02.2009-25.02.2009
Please help.
Regards,
Sanjay Sahoo

Hi,
You need to create the 3 different change masters. Each change master will be having different validity. Using this change numbers you can control of the materials.
You need to change the BOM for "A" material.
Also one thing you need to consider that, the Valid from dates you can maintain in change master. But the valid to date is default by 31.12.9999. To control this you need to create one more change master. This way only you need to control this.
Regards,
V. Suresh

Table for Job effective date

Please let me know the table and field for the Effective date the employee moved into the job
Lisa

Hi Lisa,
the fileds BEGDA and ENDDA represent the Effective date and end date of the EE assigned to the Job
Thanks
Cheera

How to create a filter based on Effective date EFFDT

Hello to all,
I am currently creating reports from an HR database that stores records by employee (EMPLID) based on effective date(EFFDT) and Effective Sequence (EFFSEQ).
It is easy to get a report that shows all entries up to a certain data (using <= or >=), however, I am not able to create a Filter (in the report or in the prompt)
that shows me the MAX(EFFDT) up to a certain data dd/mm/yyyy. (any one)
The sql script we use is the follwiing
SELECT A.EFFDT, A.EFFSEQ, A.ACTION, A.EMPL_CLASS, *
FROM PS_JOB A
WHERE A.EMPLID=' ' ----*(PROMPT1)*
AND A.EFFDT=(SELECT MAX(B.EFFDT) FROM PS_JOB B
WHERE B.EMPLID=A.EMPLID
AND B.EFFDT<=' ') *(PROMPT2)*
AND A.EFFSEQ=(SELECT MAX(B.EFFSEQ) FROM PS_JOB B
WHERE B.EMPLID=A.EMPLID
AND B.EFFDT=A.EFFDT)
Do I need to create a variable? If yes, How?
Please send me your suggestions or past experiences with BI on the subject.
Thanks
Roberto

Hi Roberto,
I would create a session variable via the Oracle BI Administration Tool.
See the following of how to achieve this:
http://download.oracle.com/docs/cd/E12096_01/books/admintool/admintool_Variables4.html
Reference this variable in your filter. It looks something like this VALUEOF(NQ_SESSION."VARIABLE_NAME")
Good Luck,
Daan Bakboord

Windows 8.1/Server 2012 R2 Exams - EFFECTIVE DATE ADJUSTED!

Hi, everyone.
Microsoft has adjusted the effective starting date of when the Windows 8.0 exams and Windows Server 2012 exams will be updated to Windows 8.1 and Windows Server 2012 R2 at Prometric.
The new effective date is January 28, 2014.
This means that current study materials for many of these exams remain current. You have a little extra time to pass these exams before they are updated.
Which exams specifically? Other questions? Learn more or ask questions at the following blog entry:
http://borntolearn.mslearn.net/btl/b/weblog/archive/2014/01/09/mcsa-windows-8-and-mcsa-windows-server-2012-exams-to-be-updated-january-28-2014.aspx
Good luck!
Best wishes, Davin Mickelson

Hi, Ken.
Unfortunately, this exam will be updated on January 28th, 2012 to Windows Server 2012 R2 and Windows 8.1.
It's too bad that Microsoft did not update the 70-417 exam description to tell you that. I know they
did update the exam descriptions for the other core exams, like 70-410.
70-410
http://www.microsoft.com/learning/en-us/exam-70-410.aspx
70-417 UPGRADE
http://www.microsoft.com/learning/en-us/exam-70-417.aspx
You have three painful choices:
Just take it anyway. Know that only some of the exam questions were updated. You can also learn what they are testing you for on the exam. You may even get lucky and still pass. You do have four (4) days to cram.
Reschedule the exam while paying that $35 reschedule fee.
Cancel the exam.
New study books will be released this spring. Here is the list from O'Reilly:
http://search.oreilly.com/?q=%22Server+2012+R2%22+exam&x=9&y=15
Sorry that Microsoft didn't update the exam's description. That's why I had the post turned into a sticky.
Good luck with your decision and with your exams.
Best wishes, Davin Mickelson

GL Trial Balance Report with Effective Dates as Parameters

We have a requirement to show the GL Trial Balance report with Effective dates as Parameters.
Current Analysis:
The Journals get updated with corresponding CCID in GL_BALANCES table when the Journal is posted. GL_BALANCE is SOB specific, if the SOB has month as period then the balances in GL_BALANCES would get updated against the month(period).
To overcome the period problem, we explored the option of using a View based on GL_JE_HEADERS and GL_JE_LINES for 'Posted' Journal Batches of a SOB. We are checking whether the GL_JE_HEADERS.default_effective_date lies between the :p_from_date and :p_to_date which is sent to the Report as a parameter. The above idea does not return expected data when the custom Trial Balance Report is run.
Following is the Query being used:
SELECT cc.segment4 ACCOUNT, bal.code_combination_id,
bal.begin_balance_dr
+ SUM (NVL (gljel.accounted_dr, 0)) opening_bal_dr,
bal.begin_balance_cr
+ SUM (NVL (gljel.accounted_cr, 0)) opening_bal_cr,
ffv.description,
(SELECT SUM (NVL (gljel.accounted_dr, 0))
FROM gl_je_headers gljeh,
gl_je_lines gljel,
gl_code_combinations gcc
WHERE gljeh.default_effective_date BETWEEN :p_from_date
AND :p_to_date
AND gljeh.je_header_id = gljel.je_header_id
AND gljel.code_combination_id = gcc.code_combination_id
AND gljel.period_name = gljeh.period_name
AND gljel.set_of_books_id = :p_set_of_books_id
AND gljeh.status = 'P'
AND gljel.status = 'P'
AND gljeh.actual_flag = 'A'
--AND gljel.code_combination_id =
-- bal.code_combination_id
AND gcc.segment4 = cc.segment4
GROUP BY gcc.segment4) c_dr,
(SELECT SUM (NVL (gljel.accounted_cr, 0))
FROM gl_je_headers gljeh,
gl_je_lines gljel,
gl_code_combinations gcc
WHERE gljeh.default_effective_date BETWEEN :p_from_date
AND :p_to_date
AND gljeh.je_header_id = gljel.je_header_id
AND gljel.period_name = gljeh.period_name
AND gljel.code_combination_id = gcc.code_combination_id
AND gljel.set_of_books_id = :p_set_of_books_id
AND gljeh.status = 'P'
AND gljel.status = 'P'
AND gljeh.actual_flag = 'A'
AND gcc.segment4 = cc.segment4
GROUP BY gcc.segment4) c_cr
FROM gl_period_statuses per,
gl_code_combinations cc,
gl_balances bal,
gl_je_headers gljeh,
gl_je_lines gljel,
fnd_flex_values_vl ffv,
fnd_flex_value_sets ffvs
WHERE cc.chart_of_accounts_id = :p_chart_of_accts_id
AND bal.currency_code = :p_currency
AND bal.actual_flag = 'A'
AND bal.period_name = per.period_name
AND cc.template_id IS NULL
AND cc.code_combination_id = bal.code_combination_id
AND per.set_of_books_id = :p_set_of_books_id
AND per.application_id = 101
AND :p_from_date BETWEEN per.start_date AND per.end_date
AND gljeh.period_name = per.period_name
AND gljeh.default_effective_date <= :p_from_date
AND gljeh.je_header_id = gljel.je_header_id
AND gljel.period_name = gljeh.period_name
AND gljel.set_of_books_id = :p_set_of_books_id
AND ffv.flex_value_set_id = ffvs.flex_value_set_id
AND ffvs.flex_value_set_name = 'JSWEL_ACCOUNT'
AND gljeh.status = 'P'
AND gljel.status = 'P'
AND cc.summary_flag = ffv.summary_flag
AND cc.segment4 = ffv.flex_value
AND gljeh.actual_flag = 'A'
AND gljel.code_combination_id = bal.code_combination_id
GROUP BY bal.begin_balance_dr,
bal.begin_balance_cr,
cc.segment4,
ffv.description,
bal.code_combination_id
Kindly suggest if I am missing anything. I am sure that the great guns here can help me out.
Thanks
Sumit

suggest to create customize TB report.

Inserting rows in cursor and breaking up when effect date matches

Hi
I have created a table cadreinc (empno varchar2(8), pay number(5), da number(5) , scale varchar2(11), effectdate date , flag varchar2(1)) with values as shown below.
04485816      12800     4200     09300-34800      1-Jan-2006     Y
04485816      13000     4200     09300-34800      1-Jul-2006     Y
04485816      13450     4600     09300-34800      27-Sep-2006     Y
04485816      13675     4600     09300-34800      1-Jul-2007     Y
04485816      14200     4600     09300-34800      1-Jul-2008     Y
04485816      14650     4600     09300-34800      1-Jul-2009     Y
I just want to manipulate data into another table by using this data and i want the result as
04485816 12800 4200 09300-34800 01-jan-2006
04485816 12800 4200 09300-34800 01-feb-2006
04485816      13000     4200 09300-34800 1-Jul-2006
04485816 13000 4200 09300-34800 1-aug-2006
like data reproduced on every month and get changes in value based on the effect date.
how to write pl sql program for this??
I have tried some what like
DECLARE
EMP VARCHAR2(8);
PAY NUMBER(5);
GP NUMBER(5);
SCALE VARCHAR2(11);
INC date;
PAD VARCHAR2(11);
FL VARCHAR2(1);
CURSOR A IS SELECT EMPNO,VIPAY,GRADEPAY,VISCALE,INCDATE,FLAG FROM CADREINC;
BEGIN
<<i_loop>> FOR I IN A LOOP
INC:=I.INCDATE;
FL:='Y';
<<j_loop>> FOR K IN 1..12 LOOP
INSERT INTO CADREFIX ( EMPNO,VIPAY,GRADEPAY,VISCALE,INCDATE) VALUES
(I.EMPNO,I.VIPAY,I.GRADEPAY,I.VISCALE,I.INCDATE);
I.incdate:=LAST_DAY(I.INCDATE)+1;
EXIT j_loop WHEN pay>i.vipay and inc=i.incdate and fl='Y';
--EXIT WHEN INC='01-JUL-2010';
END LOOP;
-- i.INCdate:=LAST_DAY(I.INCDATE)+1;
EXIT i_loop WHEN pay>i.vipay and inc=i.incdate and fl='Y' ;
END LOOP;
COMMIT;
END;
but unable to get the desired results. The pay comes for every 12 months instead of upto effect date.
Please help.

Hi,
Welcome to the forum!
Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
If you're asking about a DML statement, such as INSERT, the CREATE TABLE and INSERT statements should re-create the tables as they are before the DML, and the results will be the contents of the changed table(s) when everything is finished.
Always say which version of Oracle you're using.
See the forum FAQ {message:id=9360002}
Here's one way to do what you want in pure SQL. Since I don't have your table, I'll use scott.emp to show the way:
WITH     data_by_month     AS
     SELECT       TRUNC (hiredate, 'MONTH')     AS hiremonth
     ,       COUNT (*)                  AS cnt
     FROM       scott.emp
     GROUP BY TRUNC (hiredate, 'MONTH')
,     got_repeat_num     AS
     SELECT     hiremonth, cnt
     ,     MONTHS_BETWEEN ( LEAD (hiremonth) OVER (ORDER BY hiremonth)
                      , hiremonth
                      )     AS repeat_num
     FROM    data_by_month
SELECT       ADD_MONTHS ( r.hiremonth
                 , c.column_value - 1
               )                 AS report_month
,       cnt
FROM          got_repeat_num r
CROSS JOIN     TABLE ( CAST ( MULTISET ( SELECT LEVEL
                                              FROM        dual
                           CONNECT BY     LEVEL     <= r.repeat_num
                     AS sys.odcinumberlist
                ) c
ORDER BY report_month
;You can use a query like this in an INSERT or MERGE statement.
If you need to use PL/SQL, then you can use an INSERT or MERGE statement, with a sub-query like the one show above, in PL/SQL.

BOM explosion date after order finish date

Hi
We have issue with BOM explosion date. In process order, BOM explosion date is geting calculated after order finish date.
Any idea why this is happening.

Hi,
Just to understand the issue better, can you list the scheduled and basic dates on the order.
Anup.

How to control "To" Effective Date of Element Entry Screen in Assignment.

hi,
How do I Control the "To" Effective Date which is defaulted to 13th Apr 2007 in the Element Entry Screen of Assignment .When the screen is date tracked to
01-APR-2007 and running payroll for the Month of April 2007.
Navigation
People--->Enter---->Assignment---->Element Entry
Ram

In addition to what Tim Mentioned it can also be depends on what date you attached this element to the employee
you might have attached this element on 13th Apr 2007 to this particular assignment
Regards
Ramesh Kumar S

How to pull the job with the latest effective date in PSFT?

Hello,
I am running the PSFT 9.1.1 connector workforcefullsync.
I ran into a problem when the user has multiple job records. Each time that the user job is updated, a new job record is created. So, when the data comes from PSFT, for a user, we have multiple jobs records with different effective date (For example <EFFDT IsChanged="Y">1996-10-21</EFFDT>). OIM is only interested in the latest EFFDT.
Question 1: is it something that we can set on the PeopleSoft side, so that only the job with the highest EFFDT is sent to OIM?
Question 1b: is this is not easy to accomplish from the PSFT side, can I use transformation in the connector to only pull the job record with the highest effective date?
Question 2: if the EFFDT shows a date in the future (HR wants to disable a person in the future), does OIM ignore this change until the sysdate is after that EFFDT date?
Thanks
PS: workforcefullsync worked fine if the file contains only 1 job per employee. When the xml files contain multiple job records, I got the error:
ERROR QuartzWorkerThread-1 OIMCP.PSFTER - oracle.iam.connectors.psft.common.handler.impl.PSFTWorkForceSyncReconMessageHandlerImpl : handleMessage
ERROR QuartzWorkerThread-1 OIMCP.PSFTER - 1
ERROR QuartzWorkerThread-1 OIMCP.PSFTER - Description : 1
ERROR QuartzWorkerThread-1 OIMCP.PSFTER - java.lang.ArrayIndexOutOfBoundsException: 1
Edited by: user12049102 on Mar 22, 2010 12:06 PM

Hello,
When the PSFT team sends a message over to OIM to disable a user with today's date, the user got disabled fine in OIM. A reconciliation event is created.
When the PSFT team sends a message over to OIM to disable a user with a future date for EFFDT, let's say 3/31/2010, no reconciliation event was created.
Does OIM store this information somewhere so that it will process it later on?
It's a good thing that OIM does not disable the user who has an EFFDT in the future, but we don't want that record to be forgotten.
Please help.
Thanks

Effective date for a Formulation row

Hi,
our customer manage in JDE the effective date for each formulation row.
I.e.: In a particular formulation a particular salt is valid from 1-gen-2013 to 1-feb-2013.
In the same formulation another salt is valid from 2-feb-2013 to 1-mar-2013.
Is there a way to handle this also in PLM4P? Are there other customer that have the same formula management?
I hope my question is clear.
Thanks and regards.
Stefano.

Hi Stefano,
have you thought about using the Alternate Input Items to achieve this scenario? you can put description to clarify that the particular salt only available in certain amount of time. Hope this will be helpful.
Thanks,
Jessie

Outer join with effective date in peoplesoft query

Hi,
I'm trying to join two tables using outer join. Both tables are effective dated:
Dept_Tbl: dept_id, status, effdt
Tips_Tbl: dept_id, tips_id, effdt
Not all records in Dept_Tbl are in Tips_Tbl. I need to get all active depts and their most recent tips_id if they have one.
select a.dept_id, b.tips_id
from dept_tbl a, tips_tbl b
where a.status = 'Active'
and a.effdt =
(select max(a_ed.effdt) from dept_tbl a_ed
where a.dept_id = a_ed.dept_id
and a_ed.effdt <= SYSDATE)
and b.dept_id(+) = a.dept_id
and b.effdt =
(select max(b_ed.effdt) from tips_tbl b_ed
where b.dept_id = b_ed.dept_id
and b.tips_id = b_ed.tips_id
and b_ed.effdt <= SYSDATE)
The query only returns records that are in both tables.
Is there a way for outer join to work with effective dates?
Thanks in advance,
Reg

Here is an example of one solution. Note the use of NVL on both sides of the equal sign since both sides could be NULL in the case of the outer join
with dept_tbl as (select 1 dept_id, SYSDATE effdt FROM DUAL),
     tips_tbl as (select 1 dept_id, NULL effdt FROM DUAL)
select a.effdt
from dept_tbl a,
       tips_tbl b
where b.dept_id(+) = a.dept_id
   and NVL(b.effdt, SYSDATE) = NVL((select max(b_ed.effdt)
                                      from tips_tbl b_ed
                                     where b.dept_id = b_ed.dept_id
                                       and b_ed.effdt <= SYSDATE), SYSDATE);
EFFDT
5/7/2007 3:25:00 PM

How can read BOM component date before save the production order??

Hi Experts,
In our company, we need to develop a program to read the BOM component data of the production order
before we save the production order.
That for example ,when we create and release a production order , before we save the production
order,we want a porgram to read the BOM component data. If some component data can meet our
requriement (may be if there is material requirement quantity>100 EA),then the system will pop up a
small dialog box to remind us.
There is user exit PPCO0007 and PPCO0007.But it seems they only can read the head data of the
production order before we save the production order. And the BOM component data of the production
order are saved in the RESB(Reservation Table).So if we do not save the production order,all the BOM
component data are not saved in the RESB table.
So how can slove the problem??
How can read component date before save the production order??
Are there any other user exit we can use???

Hi Just wanted to check am I right that you are trying to check if you have enough Materials Available before you release or Save the order right ? if this is your business objective then when you create order you have material availability tab which checks and gives error if shortage is there. Please let me know if is this wht you asking for ?

BOM Effective Date

Similar Messages

Maybe you are looking for