BOM explosion in Quote to Order

Hi
In our sap instance we use the item category AGN in the Quotation and the BOM does not explode in the quote, when we create a order with reference to quote we want the BOM to explode item categoyr used in the order is TAP.
Checking the "Rexlopde structure/free goods" works but i am wondering why the BOM automatically explode when we copy from contract to order even without checking the flag "Reexplode structure/free goods"
thanks,
Meyyappan.

All depends upon ur item category and its determination.
In quotation,
QT + LUMF = (Item category?) which is not relevant to BOM Explosion
but,
OR + LUMF = TAP (relevant for BOM expolsion)
OR + NORM + TAP = TAN
Please check and inform me the Item category settings
(( even if u want the BOM to explode in QT also, u can do the item category "structure scope"settings))
Edited by: kaleeswaran bhoopathy on Jan 25, 2008 3:27 PM

Similar Messages

BOM Explosion for Multiple Process Orders

Hi,
I hope someone can assist me with the following: Is there a report I can run or transaction I can do to have BOM explosion for multiple Process Orders? I would like to input process orders for a week and see the BOM details per PO.
Thanks

Dear Sukendar,
1.For this requirement you have to go for a Z report and you can give the Functional Spec's to prepare
this report to your ABAP consultant.Prepare the input format,logic of the program and the output format.
In the logic part you can make use of this Functional Modules's CSAP_MAT_BOM_READ or
CSEP_MAT_BOM_READ or CS_BOM_EXPLOSION or CS_BOM_EXPL_MAT_V2 .
2.Using CEWB helps you to identify all the material that's having the BOM,but here the report does not
shows you the level by level by BOM for a FERT.
Check and revert back.
Regards
Mangalraj.S

BOM Explosion Number in Sales Order

Hi Experts,
For a make-to-order case, I would like to assign a predefined BOM explosion number with fixed key date to a sales order item. Instead of manually assigning the BOM explosion number to the sales order item, is there any way to let the system automatically assign the BOM explosion number?
As I read from SAP Library under the BOM Explosion Number (Fixed Key Date), it states "The system can automatically specify the BOM explosion number when entering planned independent requirements or customer independent requirements or when entering the sales order." So is there any configuration to be done in advance to enable the BOM explosion number to be automatically assigned to sales order item?
Thanks,
SW

I tried also setting up the material and its BOM determination by specifying only 1 BOM out of multiple BOMs. Still,
1. When I add the said material into sales order line and save the sales order, the BOM explosion number value never appear automatically in the sales order line.
2. When I run the planning on the sales order through MD50, the planned results do not have the BOM explosion number attached.
I think your advice is more applicable to selection of a BOM from multiple BOMs instead of determining the fixed key date based on appropriate BOM explosion number, correct me if I am wrong.
Regards

BOM Explosion based on Production Order Creation

Hi PP Guru,
My client wants the BOM Explosion date to be based on Production Order creation date. Could you help to advise how to set-up this requirement?
I have showed them these possible System Configuration in BOM explosion, but none of these options are applicable to their current business practice.
<OPPQ> BOM Explosion:
     BOM explosion number/order start date
1     Order start date
2     Order finish date
3     BOM explosion number/order start date
4     BOM explosion number/order finish date
Looking forward to you reply.
thanks,
John

Hi Sundaresan,
Thanks for your reply. So do you think there's any other way to fulfill the client's requirement? I was thinking to do the "PP Master Data" instead, in order to choose the date of explosion.
Actually the scenario is this:
Initially the Material XXXXXX has a valid BOM on 03.01.2011 to 12.31.9999, but then, some changes has been made, maybe the user has changed the component or added new component using 04.01.2011 to 12.31.9999 as validity date.
For example, the user created the Production Order (manually in CO01 or from Planned Order conversion) on 03.20.2011 and the Order Star date is 04.01.2011, so the system will copy the updated BOM which is valid on 04.01.2011 to 12.31.9999 (based on Order Start date).
However, the client wants to explode the previous BOM instead (03.01.2011 to 12.31.9999).
Please advise.
Thanks,
John

BOM Explosion in Subcontracting Purchase Order (Item Category L)

Hello everybody,
can u tell me which alternative of a BOM will be choosen during the BOM Explosion in a Subcontracting PO (Item Cat. L) - or where the corresponding customizing or master data settings can be done?
many thanks,
Gregor

Hi
BOM explosion in Subcon PO will be carried out automatically when you select the item category L.
If you want to control the BOM selection based on the Alternative then you can go with Production version option and get the help from PP consultant to create the production version.
Assign the production version in Subcontracting Inforecord.
Click the BOM explosion button the switch to alternative BOM during the PO creation.
Hope it helps
Thanks/Karthik

Bom explosion in standard purchase order

Hi Gurs,
we have a requirement to expolde bom in standard purchase order in the main item screen like in any
sales order where
main item will be item 10
sub item will be item 20
sub item will be item 30
we had already exploded bom through subcontracting but sub items are getting in a different screen.
Is there any way where we can get the subitems in the main screen rather than subscreen.
pls give your suggestions.
Thanks & Regards,
Radhakrishna.

hi charlie,
Thanks for the reply.
Yes, we have identified that but we have to have this bom explositon in the main screen.
we are using ECC6.0, so to do this if you provide me any Enhancement/Badi that would be
great help for us.
Best Regards,
Radhakrishna.

BOM explosion while creating sales order

hi
i created a fert ,verp and halb in the palnt XX
created a BOM for fert with level 5 for halb and VERP as stock item
for fert in MM01 item category is ERLA and extended with sales org
while raising sales order for fert am getting error as
HALB and VERP is not copied for BOM
pls help me

resolved
created a sales view for the HALB and ROH
Edited by: geepee on Jan 27, 2010 10:51 AM

BOM Explosion in Shopping Basket for CRM B2C 6.0

Hi Gurus,
Can we have a BOM explosion in shopping basket . As per few links I explored BOM Concept is possible only in ECC and we can implement it is CRM based by some additional configurations . (BOM in CRM) .
We have configured component for products and XCM setting for BOM is also in place . But BOM explosion is happening only at Order confirmation level .
Can anybody give some insights to get BOM explosion in Shopping Basket of CRM B2C 6.0 .
Thanks and Regards,
Tony Isaac

Hi Rahul,
Thanks for the reply.
I could find the UI component setting : ui.fields.order.bomExplosion = Visible and I have already done this . Due to this I am able to see BOM explosion on Checkout Page / Order Confirmation Page .
But still I am not able to find ui.fields.order.subitemDetailview = Visible.
Is that available only in R/3 version ?
My problem is BOM explosion is not visible in Shopping basket .
Regards,
Tony Isaac.

BOM explosion number field

Hello Gurus,
Is there any field for BOM explosion number in production order header data too?One field is in assignment tab in CO02 but I guess it is at item level.
I dont find this field at header level but perhaps it is hidden. Do you see it?
cheers
Sunny

Sunny,
This is just an understanding problem i think. In SAP the header data is maintained in 2 tables infact in 3 tables.
1. - AUFK - Basically the order master table.
2. - AFKO - Basically the Header table, containing details of the order which is common if the order has multiple items.
3. - AFPO - Basically this is where specific to the Order Item data is stored, for normal order you can find only one item per order. But you can really see the difference when you have co-products in your order, here in AFPO table you can see multiple items for the order.
Hope this helps your understanding,
Regards,
Prasobh

BOM explosion for variant material

Hi Gurus!
I created a material variant, when type match is done, the configurable material is changed for the variant properly, in this case, BOM explosion is done in the sales order and components are shown properly (I did this thought customizing).
When I try to sale the variant material directly (without configurable material and type match), the system do not show the BOM explosion.
I need the BOM explosion in the sales order for invoicing proposes.
Can anyone help me?.
Thanks!!.
J. Carlos.

Hi,
To do a requirements explosion for a configured material, you must maintain the data in the
material master record and link a BOM to the configured material.
If the material of the material variant is the same as the configurable material, the link
is already there.
You can either create a BOM especially for the configured material (perhaps using the copy from
function) or allocate the configured material to the BOM for the configurable product. The second
option is the more common solution.
If you allocate the configured material to the BOM for the configurable product, the BOM for the
configurable product is interpreted and exploded according to the characteristic values assigned.
The interpretation includes the processing of selection conditions and the setting of field values in
BOM items according to the relevant actions.
Allocating a Configured Material to a BOM: From the bills of material menu, choose Bills of material Material BOM Alloc. config.
mat. Create.
Chidambaram

How can we stop BOM explosion conditionally ?

Hi,
How can we stop BOM explosion conditionally?
Under certain status condition, I want to stop BOM explosion in CRM Sales Orders. How can we do that?
Regards,
Ankush

You have to use settings to filter mail on the server in your webmail account using a web browser. There are no filters in the mail app. There is no way to bulk delete mail either in the iPad mail app.
There are alternative mail apps that might suit your needs better than the built in mail app. You would have to search the app store to see what is available. Group Email with Attachments and MailShot are two that I know of, but I don't use either of them.

Quote and Sales Order BOM Explosion

We are attempting to utilize a ETO process without PS. We create a sales quotation and begin to build a quote BOM (using type 1 production) and a Routing for the entered quotation. Eventually we decide to create a sales order with reference to the quote. We copy the quote, we copy the quote BOM (type 1 production) to create a sales order BOM (type 1 Production) and copy the quote routing to create a sales order routing. We however make a few additions/changes to the Sales order BOM. When we run MRP for the sales order the system pulls the quote BOM not the sales order BOM.
If we slightly adjusted this proccess and create a costing BOM (type 6) at the quote rather than the production BOM (type 1) and again create a sales order with reference to the quote copying the costing BOM to create a sales order type 1 production BOM MRP says no BOM is found. We believe that MRP should pull the sales order BOM rather than the quote BOM if both are type 1 but most certainly believe that if the quote only has a costing BOM and the sales order has a production BOM MRP should recognize it and utilize it. This does not happen. Any thoughts?

Thanks Piyush.
I have already gone through that. All my questions I have alredy put here .. Could you please care to have a look at it..
Integrating SD with PI and any Services available out of the box to use..
VJ

BOM Explosion needed on Delivery for Intercompany Stock Transfer Order

Good afternoon,
I have been researching the SDN and web for a solution to my problem to no avail so far.
The business problem I need to solve is the requirement for our STPO process to explode certain BOM's that are transfered from one company/plant to another company/plant in order to record batch/serial # component information by the delivering plant on the delivery and verification of the batch/serial # in the receiving plant during MIGO processing of the delivery. This is needed by our Service Mgmt department in order to track servicable items within the Finished Good (medical devices industry).
It appears on the SDN that a BOM can not be exploded on a non-Subcontracting PO (which would be ideal for us), but barring this problem, we are trying to have the BOM explode in the Delivery created from the STPO via the VL10B transaction.
The STPO generates a Delivery doc with type NLCC and item category NLC. I have maintained the material master for the BOM material to have an Item Category Group of ERLA, and I have modified Item Category Determination in configuration in Logistics Execution for deliveries to include ERLA, usage V, and NLC as default item category. But, the deliveries generated from the STPO still do not explode, like what normally happens if the delilvery of the BOM was created from a standard Order.
The components for the BOM need to be displayed on the Delivery (if not the STPO), so the cleark can record the Batch/Serial #'s for each component. Then when the receiving plant posts the Goods Receipt for the delivery a user exit we have (based on movement type and material document code) builds a Service Mgmt table that is then processed to De-install the BOM and components from the former plant and install the BOM and components at the receiving plant (and then subsequently at the ultimate customer's location when a normal sale is made), generating a new Functional Location.
Has anyone here had to do anything like this before? Would any of you have any ideas on how this BOM explosion might work on the PO or Delivery?
Thanks in advance.
Scott.

No responses to this question.
Subject dropped.

How to restrict BOM explosion in Quotation and Sales Order

Dear all,
How can we restrict BOM main item explosion in Sales Order.
this BOM main item is having special order items which have to generate purchase requisition (item category - BANC),
with out exploding bom main item, can we generate a purchase requisition for BOM subitems, can any body explain me that how can we do that.
your suggestions will be highly appreciated.
thank you
Raghu Ram

Hi Raghu Ram,
The BOM explosion is controlled by item category.
In the item category configuration screen, under "Bills of Material/ Configuration", you can see "Structure Scope" field.
Select the one which is applicable to your case:-
"blank" - Do not explode material structure
A - Explode single-level BOM
B - Explode multi-level BOM
C - Configuration, no BOM explosion
D - Configuration, poss. with BOM explosion
E - Structure from Customer_Function (product selection)
Hope this helps
Regards,
Nicole

BOM explosion in sales order

Hi Experts,
I have met a problem in BOM explosion in sales order.
I have maintained the BOM with usage 5 and the conversion between header material and component of the BOM. But in the sales order entry, no matter how many qty I entered for the header material, after the BOM explosion, the qty of component is 1.
Can anyone help?
Regards,
Emily

Hi,
Go to CS02 and select ur bom and go to components give 1 that means 1;1
hope u get it
regards,
sadanandam kasarla

BOM explosion in Quote to Order

Similar Messages

Maybe you are looking for