Bonus depreciation valid till 2010

Hi gurus,
I am still learning AA. I got business requirement to make bonus depreciation valid till 2010 where right now it is valid till Jan 2009. Please advise steps that need to be done to extend the bonus depreciation. <Please do not solicit points for answers >
Edited by: Arun Varadarajan on Mar 10, 2009 9:13 AM

Search the blogs. Nathan Genez wrote explicit instructions on how to configure depreciation keys that will calculate "bonus" depreciation for the U.S.

Similar Messages

Calendar validity till 2010 in System.. To be extended Further

Hi,
The Calendar Validity in the system is till 2010. We need to extend the Calendars to future years before the end of 2010.
Has anyone got practical experience of doing it? If yes, Can you share your experience?
I know of many notes SAP has on this topic , the most recent one being 1529649.. but i do not want to know about notes..
If anyone has a practical experience.. would like to know what are the points to consider. and what are the challenges.. transportable etc..
Thanks in Advance,
Regards,
SAPFICO

Hi,
well it works as in the note described.
You have to extend the holiday/fabric calenders manually (the ones that are used in the specific installation).
Most of my customers use own-defined calendars so they are used to maintain them (some do it on a yearly base, some make it for a few years in advance).
They didn't report problems to me, but maybe your question can be answered more detailed in one of the logistics forum as accounting people are not that familiar with this issue (they have their fiscal-year variant and maybe some CO-verisons, thats it ).
best regards, Christian

Bonus Depreciation for subsequent acquisitions in 2010

Hi all,
We have done bonus depreciation for 2010 and 2011 aand its working fine but for one scenario.
Assets acquired in 2009, had bonus depreciation calculated for 2009. But when there is subsequent acquisition in 2010, its not calculating bonus depreciation for the 2010 acquisitions. We are not using any sub asset concept but are adding to the original asset.
Please let me know how to ptoceed ahead.
Thanks a lot in advance,
Sajan

Hello Jay-R
I have the same question the multi level method maintained as below
My requirement is I need 50% reduction on the asset addition therefore for the year 2015 it should be 500 in reduction since there is 1000 addition to the asset. Please provide me your input on how I can achieve this.

Bonus Depreciation for the year 2010

Hello Gurus,
I need to configure for the bonus depreciation based on the newly enacted US law 2010. The requirement is, for the asset purchased between 3rd Jan 2010 through 07th Sept 2010, the bonus depreciation need to be calculated @50% as special depreciation. The balance need to be depreciated as ordinary depreciation for 2010 and the remaining periods. For the assets purchased between the period 08th Sept to 31st dec 2010, the bonus depreciation need to be100%.
Please let me know the step by step configuration that need to be done for:
1. Depreciation key M20S.
2. The base method to be maintained
3. The multilevel method
4. The period control method for depreciating the values for the above mentioned dates
5. The bonus depreciation need to be calculated only for 2010 and should not be calculated for 2011 and onwards.
Also please let me know if there is any SAP note for 2010 Bonus depreciation calculation
Thanks in advance.
Best Regards,
Sri

Hi Sri,
please check the OSS notes 1316999 and 1148489 in relation to your issue.
Please make sure the config is as per the note.
Maybe the following links are useful:
http://help.sap.com/erp2005_ehp_05/helpdata/EN/ec/bb6055ddbf4db2bc8ae129f0faab61/frameset.htm
http://help.sap.com/erp2005_ehp_05/helpdata/EN/95/24f5e1b4f743658d7f3cbffe708904/frameset.htm
http://help.sap.com/erp2005_ehp_05/helpdata/EN/ba/66a5ec7bbf4060a8eb0eee29e6b565/frameset.htm
http://help.sap.com/erp2005_ehp_05/helpdata/EN/8a/f5bbe8692943328f7cb6ee4b3cf344/frameset.htm
regards Bernhard

Special/Bonus Depreciation

Hi,
There is one asset on which special/bonus depreciation is applicable say @50% each year. Depreciation is calculated at the end of year. Both ordinary dep and special dep. are calculated correctly.
Now there is further acquisition in the next year to the same asset. At the end of 2nd year, when the depreciation is calculated, ordinary dep is calculated correctly but no special dep. is calculated.
The company is using declining bal. method.
What can be the error. Can anyone help me out.
Regards.

Hi
Acq yr. 2010 / no. of yrs 1,
Acq yr 2011/ no. of yrs 1,
Acq yr 2012 / no. of yrs 1,
With the settings that you have done above - you have told the system that for the Acquisitions done in 2010, Spl Dep is to be calculated for only 1 year.... Same for 2011 and 2012....
Thats the reason system is not calculating it in the 2nd year and onwards... If you want it to be calculated, Change the 1 to 2 or desired no of years.. If you enter 999, then it will be calculated each year and every year
br, Ajay M

Table to find BOM valid-till-date

Hi Friends,
I have to check the vality of BOM components, through transaction CS03 i could able to see the Valid-till-date and i need to check the same in my code.
Looked into following tables, thre is a field valid-from-date(DATUV) but i'm not getting field Valied-to-date(DATUB).
MAST Material to BOM Link
EQST Equipment to BOM Link
STAS BOMs header
STKO BOM header
STPN BOM follow-Up control
STPO BOM item
STPU BOM sub-item
STST Standard BOM link
STVB Bills of material - Serialisation of posting
STZU Permanent BOM data
Can any one please help me.
Thanks in advance.
/Kiran

Hi kiran,
I think the Valid-to-date is in table AEEF-DATE_HI which can be linked with the BOM Header table STKO by field AENNR. Try this.
Otherwise you can also get the Date using the FM CS_BOM_EXPLOSION....
Use it as follows;
CALL FUNCTION 'CS_BOM_EXPLOSION'
EXPORTING
AUMNG = 0
CAPID = ' '
DATUV = DATVAL "valid-from date
EHNDL = '1'
MKTLS = 'X'
MEHRS = 'X'
MMORY = '1'
MTNRV = MATNR
STLAL = LAL "like mast-stlal default '1'
STLAN = LAN "like mast-stlan default '2'
SVWVO = 'X'
VRSVO = 'X'
WERKS = WERKS
mmaps = 'X'
IMPORTING
TOPMAT = STARTMAT "includes structure CSTMAT
TABLES
STBD = TBD "includes structure CSXDOC
STBE = TBE "includes structure CSXEQUI
STBK = TBK "includes structure CSXKLA
STBM = TBM "includes structure CSXMAT
STBP = TBP "includes structure CSXGEN
STBT = TBT "includes structure CSXTDL
EXCEPTIONS
ALT_NOT_FOUND = 1
CALL_INVALID = 2
MISSING_AUTHORIZATION = 3
NO_BOM_FOUND = 4
NO_PLANT_DATA = 5
NO_SUITABLE_BOM_FOUND = 6
OBJECT_NOT_FOUND = 7
CONVERSION_ERROR = 8
OTHERS = 9.
After the function call you will get the Valid to Date(DATEUB) from table STBP.
Hope this Helps you...
Regards
Karthik D

Russian Bonus Depreciation

Hello,
For the Russian bonus depreciation we have tried to follow the configuration steps according to note 944927 but the configuration entry for the last step (Customizing for Financial Accounting -> Asset Accounting -> Information System -> Country-Specific Functiond -> Russia ->Investment and Improvements) is missing in our IMG. The highest installed Support Package is SAPKH60006.
Allthough we have tried to configure new depreciation keys for the bonus depreciation, this only works in association with linear depreciation methods. If we use non-linear depreciation methods the system calculates incorrect annual depreciation values.
Thanks in advance

Hi,
You don't need to create a special depreciation key for MACRS depreciation. If you are using the US depreciation chart, the key is already there. You do, however, have to set the calendar to the correct dates. But the standard depreciation key M200 works just fine. If you are not using the US depreciation chart, copy it in a testing environment and pull up depreciation key M200 in tx AFAMA and copy it from there. In this case, you would also have to adjust the calendar. I hope this helps.
Regards,
E.

Full Bonus Depreciation irrespective of DPIS

Hi All,
We want the Full 50% Bonus Depreciation to be taken for the first year irrespective of DPIS, we want this only for Bonus Depreciation and not for the actual Depreciation for an asset having STL Depreciation Method, so we do not want to change the Prorate Date.
Is there any way to achieve this other than using unplanned or override depreciation. This link Re: How to Calculate Initial Depreciation Allowance for Assets? looked very relevant but the solution is not outlined. Please need your help and advise
Thanks,
Sarvesh

Hi All,
Please need your Invaluable inputs and advise.
Thanks,
Sarvesh

Bonus Depreciation

11.5.10.02
Hi all,
I need your input from you experts. My tax laws required for a 20% bonus depreciation in the first year along with the regular monthly depreciation. However, when the asset is place in service the middle of the year the application doesnt calculate the full 20% bonus depreciation in stead it is porate among the remaing months left in the financial year.
Ho do I set the my Tax book to allow for full 20% to be calculated on the assets no matter which period in the finanial year the asset is in service?
Please your ideas are more than welcome.

Well, the only thing I can think of is to look at the bonus depreciation rule assigned to the asset. Maybe the wrong rule has been assigned to the asset? Or the rule has been set up incorrectly? You would really have to supply detailed information about the bonus rule setup in order for us to give you any good responses. Otherwise we are merely speculating, which means you could be off chasing down dead end alleys and not figuring out the issue. There is no proration involved in the bonus depreciation rules window, but you do define a from year and a to year. So maybe from year is 1 and to year is 2? Don't know. Could be possible that you have run across an Oracle programming error. If the bonus rule looks ok, I would suggest reporting this to Oracle support.
John Dickey

Bonus depreciation Economic Stimulus Act of 2008 for FY Apr-Mar company

Dear SAP expert,
I tried to apply bonus depreciation by referring SAP note 1148489. But in some cases, I have a problem.
Our company's fiscal year is Apr.-Mar. Not Jan.-Dec.
I registered a test asset of acquired on 3/31/2008(eligible bonus dep.) and assigned depreciation key which is configured for the bonus depreciation to the asset in the master data. But when I tried to assign the dep.key, system shows error message.
Another case, asset acquired on 4/1/2008, system looks working properly.
I guess the system needs different configuration if company fiscal year is Apr.-Mar.
Could anyone help the above issue?
Yoshi

Thank you for your comment.
Is it multi level method? If so, I tried both 2008 and 9999. But it did not work same error(E651 SYST: Depreciation key ZTX1 is incorrect).
The definition is the following.
Acq.Year:2008
Years:0
Per:1
BaseVal.:01
Percent: 0.0000
Rem.Life: blank
Reduc.: 50.0000
Our system version is 470 Enterprise.
Yoshi.
Edited by: yoshiaki tsujii on Jun 11, 2008 11:17 PM

The addon page cant be found because a certificate wont be active till 2010

when I go to the add-on page I get a error stating that the page has an invalid security certificate that wont be ready till 2010.

Check the date / time on your PC in Windows.

Bonus depreciation provisions -Asset Acconting

Hi,
I am configuring Assset Acccounting in my current project.I have one issue...Please clarify...
1.Where bonus depreciation provisions apply(50% allowance u/s 168K) - will they apply to all assets of the particular asset class.
2.please suggest me how and where to configure this?

Usha,
Please start a new thread. don't steal this one.
Thanks,
-nathan

AW01N - Asset Not Fully Depreciated, Only till 2014

Dear Gurus,
There was an asset created in 2010 with the useful life of 10 years. I.e the asset should fully depreciated in 2020. When I look at AW01N, Comparison tab, it shows the planned depreciatation of 4 years only. the asset only depreciates upto 2014 (it does not fully depreciate).
I looked into the FYV which is as well defined beyond 2014. Please let me know if there is any configuration missing.
Thanks
Edited by: Priyadarshini on Apr 25, 2011 6:12 PM

Hi Priya
It makes my belief stronger that the World is going to end soon.. SAP has also realized it... :).
Jokes apart, does your Multi Level Method (AFAMA / AFAMS)has "rem life" indicator ticked.... If yes, then the present behaviour is not justified unless and until
a. you have posted any Unplanned dep and hence, the total dep till 2014 equals the APC Value of the asset, or
b. you have specified any change over method in your Dep Key or
c. you have specified any Cut off value Key in your dep key / Scrap Value in the Asset Master
Does, any of these reasons hold good?
br, Ajay M

BIS validation Exchange 2010

Hi All,
Currently I'm using Exchange 2010 and publish OWA using TMG, I also add a path EWS at the TMG listener. Then I want to add a BIS account, when I create it in the office hours till let say 11:00 PM it keep saying validation error.
But strangely if I validate early morning at 3-5 AM it works. My colleague confirm it too when he tried it, almost all the user having the same experience. I tried with different provider too, same issue.
Any ideas ?

Hello ikrisna,
Welcome to the forums.
Have a look at this KB article as I think it will explain what is happening with your account.
KB10536
Microsoft Outlook Web Access integration becomes invalid daily
Hope this helps.
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

ETL did not load Year:2011 data. It stopped till 2010.

I have a doubt with my E-T-L that took place. I gave "Initial Extract Date" as 1-January-2008. I got all the data from 1-Jan-2008 to 1-Jan-2010. My Question is why did I not get 2011 data? Since today's date is 14th September and I did ETL today only on a new system. Which Parameter should I set to ensure that it takes all the data up-to date.
Thank you for your assistance

I found something strange...
in my DAC Console -> Design -> Source System Parameters:
Analysis_END : 1-jan-2012
ANANLYSIS_START : 1-jan-2008
GBL_CALENDAR_ID=HRCAL~21
etc dates are correctly set
but when I saw the Log file (*.txt) files which are produced in SrcFiles folder (../PowerCenter/server/infa_shared/SrcFiles) the default dates and settings have been setup. i.e. the anallysis start and analysis end dates are old and the default. And the same applies for the rest of the Values
I restarted the DAC server several times. What could make the DAC not set these values??? may be this could be the reason why my ETL does not move ahead of year 2010 because the ANALYSIS_END date is 01/01/2011
Please help

Bonus depreciation valid till 2010

Similar Messages

Maybe you are looking for