Boot Camp Partition Limited to 99GB on 3GB Fusion?

I have a new (refurbished) 27" iMac with a 3TB Fusion drive.  I am attempting to install Boot Camp.  When attempting to setup the Boot Camp partition, I am presented with a default of 20 GB but CANNOT extend above 99GB.  Again, the internal drive is 3TB which has seen no activity outside of a time machine restore.
I have run a series of terminal commands and have included the information below.  Is it possible that it's only allowing me to partition the Disk0?  I thought that was the flash drive and would be exempt from the Boot Camp process?  Any help would be appreciated.
-Dan
Mac:~ User$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *121.3 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         120.5 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *3.0 TB     disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:          Apple_CoreStorage                         3.0 TB     disk1s2
   3:                 Apple_Boot Boot OS X               134.2 MB   disk1s3
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Macintosh HD           *3.1 TB     disk2
Mac:~ User$
Last login: Mon Nov 24 14:55:37 on console
Mac:~ jUser$ sudo gpt -vv -r show /dev/disk0
Password:
gpt show: /dev/disk0: mediasize=121332826112; sectorsize=512; blocks=236978176
gpt show: /dev/disk0: PMBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 236978175
      start       size  index  contents
          0          1         PMBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6        
         40     409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640  235298960      2  GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
  235708600    1269536      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
  236978136          7        
  236978143         32         Sec GPT table
  236978175          1         Sec GPT header
Mac:~ User$ sudo gpt -vv -r show /dev/disk1
gpt show: /dev/disk1: mediasize=3000592982016; sectorsize=512; blocks=5860533168
gpt show: /dev/disk1: PMBR at sector 0
gpt show: /dev/disk1: Pri GPT at sector 1
gpt show: /dev/disk1: Sec GPT at sector 5860533167
       start        size  index  contents
           0           1         PMBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6        
          40      409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640  5859861344      2  GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
  5860270984      262144      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
  5860533128           7        
  5860533135          32         Sec GPT table
  5860533167           1         Sec GPT header
Mac:~ User$ sudo fdisk /dev/disk1
Disk: /dev/disk1 geometry: 97451/255/63 [1565565872 sectors]
Signature: 0xAA55
         Starting       Ending
#: id  cyl  hd sec -  cyl  hd sec [     start -       size]
1: EE 1023 254  63 - 1023 254  63 [         1 - 4294967294] <Unknown ID>
2: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
3: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
4: 00    0   0   0 -    0   0   0 [         0 -          0] unused     

I worked with Apple Support.  Something appeared to be incorrect in the partitions of the Fusion drive as shipped from the factory.  We deleted the drive via Terminal and Disk Utility was then able to recognize a damaged Fusion volume and correct it.  After a new install of Yosemite I was able to partition Boot Camp as desired and install Windows.

Similar Messages

  • Boot Camp partition missing, VMware Fusion not working

    I'm using OS 10.10.2
    Windows 7
    Fusion 7.1.0
    Winclone 3.7
    I've been sharing a boot camp partition with Fusion for a while. I don't know when it happened but when I recently tried to log in using Boot Camp, the partition didn't show up in Apple's start up screen or in the Finder even though I could see it in Fusion.
    I needed to expand the partition so I backed it up with Winclone changed the partition from 40 to 75 gig and reinstalled the Winclone file.
    Now I'm unable to boot into Windows using Fusion and I still can't see the Boot Camp partition when I start up.
    Fusion said
    so I did.
    The new virtual machine said
    and
    Now it wants me to upgrade Windows.
    Please help.

    I saw R.NTFS so I started on the Windows DVD and ran Repair.
    Unfortunately I still can't get Boot Camp to do anything beside give me a flashing cursor on a black screen.
    What else can I do?
    This is from the terminal screen after I did everything above. It still says R.NTFS
    Last login: Sat Mar 14 01:30:47 on console
    Bruces-MPB:~ bruce$ sudo dd if=/dev/rdisk0s4 count=1 2>/dev/null | hexdump -C
    Password:
    00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
    00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 58 c8 6f  |........?....X.o|
    00000020  00 00 00 00 80 00 80 00  ff 0f a8 04 00 00 00 00  |................|
    00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
    00000040  f6 00 00 00 01 00 00 00  c9 3e 83 34 55 83 34 4e  |.........>.4U.4N|
    00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
    00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
    00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
    00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
    00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
    000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
    000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
    000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
    000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
    000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
    000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
    00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
    00000110  28 10 b9 d8 0f fc f3 aa  e9 5f 01 90 90 66 60 1e  |(........_...f`.|
    00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
    00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
    00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
    00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
    00000160  0e 16 00 75 bc 07 1f 66  61 c3 a0 f8 01 e8 09 00  |...u...fa.......|
    00000170  a0 fb 01 e8 03 00 f4 eb  fd b4 01 8b f0 ac 3c 00  |..............<.|
    00000180  74 09 b4 0e bb 07 00 cd  10 eb f2 c3 0d 0a 41 20  |t.............A |
    00000190  64 69 73 6b 20 72 65 61  64 20 65 72 72 6f 72 20  |disk read error |
    000001a0  6f 63 63 75 72 72 65 64  00 0d 0a 42 4f 4f 54 4d  |occurred...BOOTM|
    000001b0  47 52 20 69 73 20 6d 69  73 73 69 6e 67 00 0d 0a  |GR is missing...|
    000001c0  42 4f 4f 54 4d 47 52 20  69 73 20 63 6f 6d 70 72  |BOOTMGR is compr|
    000001d0  65 73 73 65 64 00 0d 0a  50 72 65 73 73 20 43 74  |essed...Press Ct|
    000001e0  72 6c 2b 41 6c 74 2b 44  65 6c 20 74 6f 20 72 65  |rl+Alt+Del to re|
    000001f0  73 74 61 72 74 0d 0a 00  8c a9 be d6 00 00 55 aa  |start.........U.|
    00000200
    Bruces-MPB:~ bruce$

  • How do I make a clone of the Boot camp partition?

    My MacBook Air (10.6.8) is having problems and I need to send it away for repairs. Before I do that I want to make a clone of everything and put it on my new MacBook Pro (10.7.2)
    I am making a clone of the Mac partition using Carbon Copy Cloner. That has worked well as a backup for me.
    The only problem is I need to make a clone of the Boot camp partition (Windows partition) and I don't know how.
    I want to make an exact clone so it has all the operating system, files and everything.
    The other question is when should I make a Bootcamp partition?
    Should I migrate the clone to the new mac using Migration Assistant, and then make a boot camp partition? And then what are the exact steps putting the clone onto the boot camp partition?
    Thanks for any help.

    Here are some previous coments made on this forun regarding backup of a Boot Camp  partition. I use Paragon HDMSuite 2011.
    Casper 6 does seem to work;
    WinClone was handy for XP users but doesn't for instance check for errors during the backup only during restore.  Winclone was discontinued at 2.2, all 2.3 versions are hacks (removal of the OS check seems to be the main thing) There has been no deveoplment or support for a while now.
    Acronis 2011 w/ plus pak, didn't work well previously
    Ghost 15 - probably not
    Casper 6 works for Windows on Boot Camp only
    CopyCatX is more lengthy and sector copy so takes the longest.
    Paragon Hard Drive Suite 2011 because it works great
    and they have CampTune
    Windows 7 system backup and restore - Apple's goofy HFS read-only interferes with system and file backup.
    I have also used Casper, Clonezilla and Paragon but less regularly, Casper failed a few times, I stopped using it, Clonezilla worked but took forever (for me) Paragon (which I have only used twice) was the best but my sample is limited.
    I have restored from DU, CCC, SuperDuper and TM, they all worked, TM was slower but not a lot, you can boot from the others, which I prefer.
    HDM 2011 can do either offline or online backups, the difference is that with an offline backup, the entire partition (or disk) is unallocated. In an online backup, the backup utility is running against a partition that may be making changes to itself. When you run CCC or SD! in OS X, you're running an online backup. However, I would recommend (at least for the first backup) that you boot from the HDM recovery CD to do an offline backup. This will ensure that you have an *exact* copy of the parition/disk.
    Since this is you first time backing up your partition, I would suggest using one of the Backup Wizards. They'll guide you through the backup process and keep you from doing something wrong  Similarly, use the Restore Wizard to restore your partition/drive.
    HDMS 2011-  back up a dual-boot Mac to an external USB drive, do:
    1) Boot from the Recovery Disk (I'm assuming that the backup hard drive is attached before you reboot)
    2) Select Paragon Hard Disk Manager
    3) Launch the Backup Wizard by selecting Wizards > Backup Wizard
    4) Select the Mac hard disk (not the partition) where it asks "what to backup"
    5) On the Backup Destination page, select "Save data to any local drive or a network share"
    6) Hit the radio button for the "Save to local drive option" (unless you got a boatload of DVD's  )
    7) Select the external USB drive as the backup destination
    8) Look over and correct the name and comments
    9) Hit Next to start the backup
    When it's done, you have an entire copy of your Mac's HD saved to external media.
    If you need to recover your HD, just run the Recovery Wizard and reverse the process.

  • How do I write to my boot camp partition with Paragon NTFS that comes with Mountain Lion?  Or how do I get my boot camp partition to show up in Paragon's "Available NTFS partitions:" panel like my external hard drive does?

    I've just set up boot camp on my MacBookPro with a freshly installed Mountain Lion and Windows 7. 
    I would like to read and write in both directions from drive to drive if possible.  I've hunted around quite a bit to try and work this out, and so far I understand that one can write to or transfer files from one drive to the other with Paragon NTFS among other softwares. 
    I noticed when I looked in my system preferences the utility "Paragon NTFS for Mac OS X" came with Mountain Lion and it will recognize an external hard drive when I have one plugged in under "Available NTFS partitions:".  However, it does not automatically recognize my NTFS boot camp partition nor does it automatically give me write access. 
    Is the Paragon NTFS that comes with Mountain Lion limited in some way? 
    Do I still need to purchase and download the software of the same name from Paragon to get the full write privilidges I want or is there something I can do to get the version of Paragon on my MAC to recognize and give me write priviledges to my boot camp partition?
    I'm open to all suggestions to get the read / write access between partitions in my boot camped drive.
    MacFUSE is also listed in the System Preferences of my machine (it also came with Mountain Lion), if that helps.  I'm still working out exactly what each of these is supposed to do and how I can use it to accomplish the task at hand.
    My boot camp drive does appear normally in other contexts and in disk utility it indicates that the drive is mounted.
    Thank you for any guidance you can give me. 

    Interesting. Comes with? you didn't have either before? Paragon is commercial and is now v. 10.0, they were the only one keeping updated and was supporting 10.7.4. I would not enable more than one.
    For writing to HFS Paragon has theirs but probably give the nod to MacDrive there.
    I never do an upgrade to a new OS over the old system, I backup (clone) and format the drive with the new OS and do the install so whatever is there I know is clean and also to keep from carrying around leftovers from years and systems past.
    I would assme Paragon is limited. Try their site and knowledge base?
    MacDrive
    http://www.mediafour.com/updates/macdrive
    Paragon HFS
    http://www.paragon-software.com/home/hfs-windows/
    Paragon NTFS
    http://www.macupdate.com/app/mac/26288/ntfs-for-mac-os-x
    http://www.paragon-software.com/home/ntfs-mac/

  • How to adjust Boot Camp partition for more Mac space?

    Hello,
    TLDR Version:
    When I setup Boot Camp, I intended to stay in Windows. I’ve now migrated to Mac and want more disc space allocated to it. How can I adjust this in Boot Camp without deleting and reinstalling Windows?
    Extended Version:
    I have had a 21.5” iMac for right at a year now, and have been running Windows 95% of the time prior to last week. I decided that I was spending more time on the Mac partition and deciding that it was better in my eyes than Windows, and decided to install all of my productivity software (Microsoft Office/Adobe Creative Suite) on it in an effort to wean myself off of Windows.
    Unfortunately, when I set the computer up, I did a 90/10 partition install of Windows on Boot Camp, with 90% of the disc space being allocated to Windows. Obviously, this will no longer work for me, and working from my files in the Boot Camp partition is both limited, and irritating. I would like to adjust the partition the other way; probably an 85/15 partition with the 85% being Mac OSX and the remainder being Windows. Because Mac OSX is the boot disc, it appears as though it can be made smaller, but not larger in Boot Camp.
    1. Is there a way to adjust the partition size without having to delete the Windows partition and reinstall?
    2. Is the Airport Time Capsule a suitable device to temporarily dump my data on while I adjust the partition? I’ve got 99% of my data on a separate external HDD from a data backup a month ago, but would rather not have to make another backup.
    I appreciate any information.
    Best regards,
    Ryan

    Ryan M Smith wrote:
    1. Is there a way to adjust the partition size without having to delete the Windows partition and reinstall?
    You may want to look at Winclone or Camptune. There is Gparted/Live CD for the adventurous souls.
    2. Is the Airport Time Capsule a suitable device to temporarily dump my data on while I adjust the partition? I’ve got 99% of my data on a separate external HDD from a data backup a month ago, but would rather not have to make another backup.
    Time Machine cannot backup Windows. It will only back up OS  - Mac Basics: Time Machine backs up your Mac - Apple Support.

  • Mac pro boot camp partition cloned to MBP?

    i have a 200 GB mac pro boot camp partition with windows 7 on it and between setting it up and getting all my software customized it has been like doing time in a soviet gulag.
    if i create a 200 GB partition on my MBP can i clone this from one machine to another?
    it would save me a heck of a lot of time and aggravation
    TIA
    p.s not sure if this makes a difference but my mac pro is a first generation deal that required amy burning a image to disk or something along those lines...

    Do you know what I do to get 10.5?
    Purchase it if the computer doesn't include it.
    Also, I don't understand why the drivers are going to be on older software that doesn't have Boot Camp bundled with it.
    The drivers are not on a Mac OS X 10.4 CD or DVD. They are on the Mac OS X 10.5 DVD.
    Leopard has Boot Camp bundled with it doesn't it? Isn't part of the deal upgrading and improving the drivers?
    Yes.
    You say in the above "or use up a Windows installation"
    This only applies if the Windows disk or license agreement allows you to create a limited number of installations.
    Are you saying here that I could also reformat the drive with XP on it?
    You could, but there is little reason to do so.
    Do I have to reconfigure my workspaces if I do the second option above?
    If you erase the Windows partition, yes.
    (30311)

  • How-To Delete Boot Camp Partition with Parallels Configure to Access It

    Hi Everyone,
    I would like to delete my boot camp partition from my MB to reclaim some space due to the increasing storage demand from iTunes library? (I need to find out what can I do when the library is getting larger than my HD too, but that's another topic...)
    I also have Parellels Desktop configure to access the boot camp partition instead of creating its own virtual hard drive. I'd like to know if there's any problem with my parallels after I delete the boot camp hard drive? Will I have to reinstall my Windows XP OS again after deleting the partition?
    Thank you,
    Nacintosh520

    Hi Eric
    Are you saying that I have to reinstall my Windows XP OS all over again, with the patch and everything after deleting the BC partition? Is there a way to create a virtual hard drive from the BC partition of what I have? It's such a time-consuming process that I have to tweak the OS to the way I'd like it.
    I wonder what solution will Apple offer when they offer more and more content, and space for each computer is limited. I did some research on this issue and it turns out that the solution is the set the option in iTunes to "Manually manage my music files" in the Preferences panel. I don't want to do this because if I set this option, my files won't be organized any more, and it's gonna be all over the places. But I guess I have to do this until Apple offer an option such as "Move my Podcasts file to _ external hard drive" to keep everything stay organized.
    Thank you,
    Nacintosh520

  • OS X Partition split and duplicated when creating Boot Camp partition

    Hi,
    I have installed a larger internal HD 3TB into my iMac Late 2009 21.5 inch. All went well until I used Boot Camp to set up a Windows partition. My intention to have an OS X partition of 2.8TB and a Boot Camp partition of 200 GB. I am running the latest version of Yosemite.
    Once the Boot Camp partition completed, and Windows 7 installed successfully, I have rebooted in OS X to find that the HD is now showing as a Partition of 200GB for Boot Camp, a partition of 2TB for Macintosh HD (with all my applications and data etc), and a second Macintosh HD partition of 800GB, also containing all my applications and data etc which appears to have been duplicated. Prior to completing the Boot Camp process, the internal HD was showing correctly as a single partition of 3TB.
    I have completed this process twice, with the same result. After the first occasion, I reformatted the new internal HD and started completely from blank again (as I was unable to erase or change the duplicated partition in Disk Utility).
    I used Migration Assistant to transfer my files, data etc from the old Internal HD which is now an external HD.
    Any thoughts on what I am doing incorrectly?

    This is expected behavior. On your Mac, the 3TB disk is partitioned to allow Windows to function properly in BIOS mode. BIOS mode (and CSM-BIOS, to be precise) has a limitation of a 2TB disk. on a larger disk (including 3TB Fusion drives), the disk is partitioned in such a manner that the Windows adheres to the 2TB limit.
    You can can see the exact partitioning, if you are so inclined, using the following Terminal commands.
    diskutil list
    diskutil cs list
    sudo gpt -vv -r show /dev/disk0
    sudo fdisk /dev/disk0
    The "sudo" commands will prompt for your password, and it will not be echoed back. You may also see a warning about improper use of "sudo" and potential data loss due to "abuse" of the command.

  • How to update xp to sp3 on boot camp partition

    I am running Windows XP via boot camp (only to use cad drawing program) Each time I try to update windows to SP3 I get the message that I have not got enough memory to do this ( or the update crashes and then uninstalls SP3 )The boot camp partition is 34 Gb as default  The Imac has 3gb ram with a 320 hard drive memory what do I need to do to update to SP3 in order for bit defender 2012 to run
    I have virtually nothing on the boot camp partition apart from the cad programme which I do not think is very big

    Anything non-essential connected during the update ?
    Like external harddisk, printer, scanner, etc.
    If so, disconnect prior to starting the update.
    Run a CHKDSK http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/c hkdsk.mspx?mfr=true before attempting the next update.
    Maybe some error turns up.
    Stefan

  • How can I get Lion to recognize my boot camp partition.

    Yesterday morning I found my mac suffered from a b-tree failure and was unable to access OS X 10.6. I ended up booting into my Boot camp partition of Windows XP and backed it up then reinstalled Snow leopard. Then I upgraded to Lion, saw it fail due to a partitioning issue, created a 2gb partition called Mac HD 2 (by shrinking mac hd), saw i could install but not full install. So I created another partition and installed Lion successfully. Got into Lion and shrunk my 2x 2GB partitions into one 4GB partition. My Windows XP hard drive boot camp partition was still on my desktop. I can access all the files but I can not boot into it. When I hold down the option key there is only Mac HD or Recovery partition.
    Is there any way to get the boot camp partition to work?
    I did notice that when I was looking through the settings I could choose which HD was the default boot option. Mac hd with 10.7 and a folder called Windows XP were both available.

    We also cannot get Robohelp to recognize our FrameMaker installation. 
    We are using Robohelp 9  and Framemaker 11.
    We are in the process of moving all of our Robohelp content to Framemaker, but our project team still needs CHM files for the next release or so.  So we figured we could move our content to Frame 11, then import the Frame content into Robohelp when we needed to generate the CHM files.
    The process works great when we use RH 10 and Frame 11, but we get the following error when we use RH 9:
    "This operation cannot be completed without FrameMaker.  Install FrameMaker and try again."
    I have uninstalled and reinstalled Frame 11 and RH 9, but am still getting the same error.  Buying a set of new Robohelp 10 licenses probably isn't an option.
    Any other suggestions?
    Thanks,
    Sue

  • Boot Camp partition not showing in startup disk or when holding alt key

    I've read countless discussions about similar questions to this one, however, I still haven't been able to find any solution.
    I have an old 2006 MacBook that has just been fully updated and reformatted. I'm running OSX 10.7.5 and Boot Camp 4.
    I went through the Boot Camp installation from an Windows ISO image in my usb drive, where it succesfully downloaded all files needed, and prompted me to make the partition, after which it restarted and was supposed to take me to the installation manager in the Windows partition. I first got the "No bootable driver" error, to which I read I was supposed to restart the computer, hold the alt key, and choose the boot camp partition. However, it does not show up. I only get Mac and Recover drivers.
    I went into the Mac's startup disk, and only the Mac driver is showing, no Boot Camp driver, however, when I go into Disk Utilities, I can see that the BootCamp driver there.
    I read somewhere that I should zap pram and reset SMC, which I did with their instructions. It didn't change anything, I still only get the Mac driver and Recovery when hitting the alt key.
    Does it have something to do with my MacBook being older? That's the only reason I can think that would not allow me to do this.
    Let me know what other info I can give you so that you can please help me!! Thanks in advance!

    In last resort I solved my missing BOOTCAMP partition problem using a program called: iPartition from coriolis systems located in the United Kingdom http://www.coriolis-systems.com/iPartition.php it took me a coupleof days to figure out the credit card system they have Hint: use your 9 digit zip code to find your credit card address and call your bank if you have an overseas hold on the card!!!! The program found my missing BOOTCAMP partition and restored it. It did take a couple of e-mails to learn to use their program. Let me know how you turn out!

  • After Boot Camp partition, iMac no longer boots

    Hi, I have a 20" iMac Core Duo (the first Intel Mac off the line) running Snow Leopard 10.6.4. I ran the Boot Camp Assistant to partition my hard drive, and it successfully created the "BOOTCAMP" drive. When it asked for my installation CD, I tried loading a Windows installation partition through a USB hard drive, but the assistant would not recognize it as an install disk. So, I closed out of the assistant early, leaving the Boot Camp partition in place. Eventually, I rebooted my machine in an attempt to boot directly from the USB drive and resume installation.
    However, I found the machine will not boot at all. It powers on normally, makes the startup sound, but after a few seconds I'm left with just a flashing folder and question mark icon. Holding down Option-key at startup does nothing. Trying to boot from my Snow Leopard disc by holding down C or D during startup does nothing. Holding down Command-S does nothing. Holding down Shift-key does nothing. Resetting the PRAM does nothing.
    What can I do? Is there some way I can access the on-board EFI to make sure the correct startup disk is selected? Why am I unable to boot from my CD drive?
    Thanks for your help, everyone.

    On OSX go to System Preferences the Startup Volume and reset your Windows 7 partition to be the default.
    On the next reboot it should automatically boot into Windows.
    A PRAM-reset http://support.apple.com/kb/HT1895 can be the cause of this behavior.
    Stefan

  • Can no longer see Boot Camp Partition

    Hello all,
    I was having problems with booting into Boot Camp/Windows 7 (I was just getting a black screen), so I attempted to delete the boot camp partition and reinstall it.  When I did that, the program hung for a while, and finally said there was an error deleting the partition.  However, it appears it like halfway deleted it, as it no longer shows up!  When I go into disk utility, Macintosh HD shows blue, and then there is a 50 GB partition (the size of my bootcamp) that is white, but it is unlabeled.  I cannot adjust the partition to make it the whole HD, and if I go to boot camp assistant, and try to make a new bootcamp partition, it bounces back with an error message as well.  I am wondering how I can restore the partition back to the original all mac hd partition..ANy help would be greatly appreciated!!
    Kevin

    WinClone 3 $20
    When you move to a new OS: clone your system, make sure you have backups you can use - for each - the partition table "rules" change with each new OS. And you want to reformat a drive from time to time especially then.
    Carbon Copy Cloner 3.4 is a good way to clone your OS X partitions.
    Basically, "start over" and restore to one HFS volume with OS X then run Boot Camp Assistant, then restore with Winclone image you made easier.
    www.apple.com/support/bootcamp
    Find CCC and WinClone www.macupdate.com

  • Boot Camp Partition & Windows Vista - Disk format Problems

    When Boot camp partitions the disk (I chose 25gb) it automatically formatted it as FAT32. However, when installing Vista, it says that it requires the disk to be formatted as NTFS.
    The Boot camp instructions says I should be given the option which format to use, but no option came up. I don't want to partition more than 32gb.
    How do I get Boot camp to format the partition correctly?

    Read the instructions that come with Leopard Boot Camp. The partition is automatically formatted at FAT32. However, it's a) not bootable (Windows has to do that) and b) Vista requires NTFS. That means once you're in the Vista installer you need to REFORMAT the partition. Select the partition, and then click, umm, disk options I think. Then reformat the drive. If you do that you should be able to continue.
    100years wrote:
    When Boot camp partitions the disk (I chose 25gb) it automatically formatted it as FAT32. However, when installing Vista, it says that it requires the disk to be formatted as NTFS.
    The Boot camp instructions says I should be given the option which format to use, but no option came up. I don't want to partition more than 32gb.
    How do I get Boot camp to format the partition correctly?

  • Boot Camp Partition no longer shows in StartUp Control Panel

    My Boot Camp partition no longer shows in StartUp Control Panel, but does show up using Option Key at startup. This started soon after the latest Parallels update. The Boot Camp partition seems normal and healthy in the finder. Once started via the Option Key, Windows XP-SP3 runs fine. Upgrading to BC 3.0 did not have any affect.
    I've tried LOTS of troubleshooting strategies, including completely deinstalling Parallels. Deleting obvious preferences, etc.. No joy.
    Any suggestions?

    Hi,
    if I remember correctly Parallels installs some kind of file system driver to OSX to access NTFS files system partitions.
    The 'case of the missing Windows partition' is widely spread when using these NTFS file system drivers in OSX.
    (Others are NTFS-3G; Paragons NTFS for Mac and Tuxera NTFS for Mac).
    To my knowledge there is no other remedy to this phenomenon then to deinstall the NTFS drivers.
    But as long as the Option-key is working maybe you can live with it.
    Or use rEFIt http://refit.sourceforge.net/ as a Boot-Menu.
    Regards
    Stefan

Maybe you are looking for

  • Search results incorrect

    When I generate the webpages in Robohelp HTML, I click on the Search function and type in words and part words. eg. administration returns 8 topics admini returns 0 topics However, some part words do work numb return 20 topics numbe return 20 topics

  • PSE 13 version set

    I'm unable to view, manage or otherwise use version set options in PSE 13 (Windows 8.1) even though the set is created and the set exists and can be viewed in File Explorer. It makes no difference if the set is created in the Organizer or manually sa

  • Do InDesign table fields convert to form fields for interactive PDFs?

    Does InDesign CC recognize table fields as form fields when creating fillable form PDFs - or do I have to create individual text fields on top of the InDesign table and assign form field text field characteristic in the buttons and forms menu?

  • Oracle and Windows 2003 server

    I installed 10gR1 on a 2003 server. When I restarted the server, Oracle would not start (all services set to start automatically). If I stop and restart it through Windows nothing happens. If I login through SQLPlus as sysdba and use the startup comm

  • How can I find out which features will not available due to compatibility?

    I want to find out which features will not be available for 11.2.0.1.0 when the compatible parameter is set to 10.2.0.1.0. Thanks.