BootCamp cannot create new partition on drive free space.

Hi Folks,
I am hoping for some advice here. I am running OS X (10.5.6) and wish to use Boot Camp to created a partition to install Windows XP SP2 for some gaming. My machine is a late 2007 MBP 2.4GHz C2D, 4GB RAM, 340GB WD transplanted hard drive.
I have about 180GB of free space for a new partition to be created for the XP install.
When I fire up the Boot Camp Assistant tool, I am immediately informed of the following:
"The startup disk cannot be partitioned or restored to a single partition."
"Back up the disk and use the Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using the Boot Camp Assistant again."
+ I have never had more than one partition on this drive.
+ I installed the drive new with no partition and used a tool named 'Carbon Copy Cloner' to transfer data from the original drive onto this drive, the machine booted right away and I have been using it without issue ever since.
+ I have run Disk Utility to 'Verify Disk', 'Verify Disk Permissions' and 'Repair Disk Permissions' all ran with no problems and completed successfully.
My question is, how can I make a usable backup copy of the drive to restore back to the drive after performing the re-format?
Can I use the Carbon Copy Cloner software for this? I want to make sure that the resulting internal drive is bootable, etc.
I have been running Time Machine as well and have a disk full of backups from that app, but I have no idea how to use it to restore the drive to it's current state after re-partition and format.
Thanks in advance for any and all suggestions.
John

So today I used the free "trial" version of SuperDuper to create a bootable clone of my primary internal drive.
It was about 100GB and took a long time to copy onto USB 2.0 external SATA drive, but it worked.
SuperDuper provided the option to make the copy the boot device as well. After reboot, I used OS X Disk Utility to erase primary drive.
I then performed the operation in reverse, copying the entire contents back to the original location.
After a reboot, I ran the Boot Camp Utility and received the same aggravating message which I received before.
How can I be sure that I am actually re-formatting the target drive in order to consolidate free space? Is this my issue? When I performed the erase operation, I skipped the "zero out free space" step. Am I using the correct utility to prepare the target drive?
Once again, any and all help is greatly appreciated.
Regards,
John

Similar Messages

Bootcamp Cannot create a partition

As a newbie to mac, i thought it would be pretty easy to use the assistant to install W7.
Following the bootcamp procedure, Bootcamp assistant fails to create a partition.
"Your disk could not be partitioned. An error occurred while partitioning disk." No other information leads me to understand the problem
So i tried to verify disk problems and repair but no luck.
I looked online and some suggestions include restarting the computer in single mode and running /sbin/fsck -fy but despite that same problem.
So i thought i would try to just create a normal partition using disk utility (nothing to do with windows 7 etc).The error is as follows:
"This core storage operation is not allowed on a sparse logical volume"
Can anyone help?
I have a Macbook pro 15 retina (mid 2014) running Yosemite 10.10.1

Miteshs-MacBook-Pro:~ Mitesh$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *251.0 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         250.1 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Macintosh HD           *249.8 GB   disk1
                                 Logical Volume on disk0s2
                                 014EED50-5E1E-4B80-AC25-2BE81077D83E
                                 Unlocked Encrypted
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 1D2A644C-DAAC-496C-9506-E32FC1C64606
    =========================================================
    Name:         Macintosh HD
    Status:       Online
    Size:         250140434432 B (250.1 GB)
    Free Space:   0 B (0 B)
    |
    +-< Physical Volume E7639A7B-7A3D-4DF1-9B59-A87D771E6552
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     250140434432 B (250.1 GB)
    |
    +-> Logical Volume Family 29E1E880-0EA9-4CF1-82C3-AE6D0B9B2676
        Encryption Status:       Unlocked
        Encryption Type:         AES-XTS
        Conversion Status:       Converting
        Conversion Direction:    forward
        Has Encrypted Extents:   Yes
        Fully Secure:            No
        Passphrase Required:     Yes
        |
        +-> Logical Volume 014EED50-5E1E-4B80-AC25-2BE81077D83E
            Disk:                  disk1
            Status:                Online
            Size (Total):          249821659136 B (249.8 GB)
            Conversion Progress:   Paused
            Revertible:            No
            LV Name:               Macintosh HD
            Volume Name:           Macintosh HD
            Content Hint:          Apple_HFS
gpt show: /dev/disk0: mediasize=251000193024; sectorsize=512; blocks=490234752
gpt show: /dev/disk0: PMBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 490234751
      start       size index contents
          0          1         PMBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6
         40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 488555536      2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
488965176    1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
490234712          7
490234719         32         Sec GPT table
490234751          1         Sec GPT header

Repairing bootcamp after creating new partition

Like others who have posted here, I had two partitions, MacOS and Bootcamp that worked just fine. I then added a new partition because I need a "D" drive in Windows configuration to be able to install a particular set of programs that rely on such a configuration (long story and perhaps there was a better way). Once I added the new NTFS partition and rebooted, I no longer see the Windows drive as a a boot option. I don't know if the command line "sugo" utility and syntax that I've seen in postings here applies to all such situations but if anyone can guide me through it I would be very grateful. Thanks

No worries. Here you go. I'm glad you can interpret this stuff.
sudo gpt -vv -r show /dev/disk0
gpt show: /dev/disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 1953525167
       start        size index contents
           0           1         MBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640 1664355600      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
1664765240     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1666034776         936
1666035712    44627968      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1710663680   242860032      5 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1953523712        1423
1953525135          32         Sec GPT table
1953525167           1         Sec GPT header
sudo fdisk /dev/disk0
Disk: /dev/disk0    geometry: 121601/255/63 [1953525168 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [    409640 - 1664355600] HFS+
3: AB 1023 254 63 - 1023 254 63 [1664765240 -    1269536] Darwin Boot
4: 07 1023 254 63 - 1023 254 63 [1666035712 -   44627968] HPFS/QNX/AUX
sudo dd if=/dev/rdisk0s5 count=1 2>/dev/null | hexdump -C
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS    .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 a8 f6 65 |........?......e|
00000020 00 00 00 00 80 00 80 00 ff bf 79 0e 00 00 00 00 |..........y.....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 9a b9 e6 6e d8 e6 6e 0c |...........n..n.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200

How to create a partition using the free space of an existing[SOLVED]

Hi Guys,
Since I could not install fifa 09 using wine on linux, I need to create a partition where I can install windows first in order to install fifa 09 on it. How can I create a partition using the rest free space of my , for example, /home partition?How can I do it in a secure way (meaning without doing something to my existing archlinux installation files and system files) ?
Thanks.
Please see this post:
https://bbs.archlinux.org/viewtopic.php?id=109402
Last edited by Archie_Enthusiasm (2010-12-08 19:23:46)

Use Parted Magic. But you *should* backup any important files just in case, regardless of method you use. You never know. Someone could unplug your computer, a power surge might happen, etc. A cousin of mine actually did something similar while I was gaming, the extension cord has a red button which he "accidentally" pressed. I would've cracked his skull had he done it while resizing a partition.
Anyway, the partitioning scheme should be the first thing you do when you decide go this route (dual booting). I remember about a year ago I forced myself to use Linux by formatting the entire drive to ext4, except for the 2 GB + 20 GB ntfs partitions. It was what kick-started me on this path. Here's my partitioning scheme for both computers, maybe you'll get an idea and do something similar:
Older computer:
2 GB ntfs - MicroXP
8 GB ext4 - Arch Linux + Home dir (to keep the dot files organized in one place)
20 GB ntfs - games partition
Rest is for media, formatted as ext3 with inode 128 (so it can be loaded as Read-Only in Windows too via Ext2fsd so they won't be affected in case of a virus infection)
New computer:
20 GB Windows 7
10 GB Arch Linux + home dir
50 GB games partition
Rest of the space is ext4 mounted to /media
Note that they're all primary partitions for remembering easier (sda1, sda2, sda3, sda4) instead of a combination of primary and extended which would probably look like sda1, sda5, sda6, sda7, etc.
Last edited by DSpider (2010-12-03 13:02:26)

How to merge my disk partition with the free space

Hello! I have a macbook pro mid 2010 with Mavericks, I had 2 partitions and deleted one with the disk utility.
Now I want to expand the one that I have left but I can't, I cannot drag the corner of the partition because it is below of the free space.
I will post a picture so you can understand better. Also I tried using iPartitions but it won't let me make any changes. Thank you
I don't know if anyone can see the picture so i'm leaving a url: https://imagizer.imageshack.us/v2/505x387q90/745/WaiZID.png

You need to create a partition in the free space, clone the content of Macintosh HD 2 to it, restart from the newly-created partition, and delete the one currently listed as Macintosh HD 2.
(114068)

Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro

Hi Everyone,
Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro.
The bootcamp drivers have been downloaded from apple's website. Filename: BootCamp5.0.5033
I have a iMac 27" late 2013 model.
NOTE: I have downloaded the drivers manually from apples support site as the bootcamp wizard fails third of the way through the download.
Appreciate any assistance.
Regards,
asdutoit

There is a missing point in this thread, and it is that the Boot Camp drivers for the Late 2013 iMac can only be downloaded from Boot Camp Assistant. The Boot Camp drivers available in the Apple site are not compatible with that iMac.
Delete the Boot Camp drivers from the USB drive, open Boot Camp Assistant and try to download the Boot Camp drivers again. If you get a message telling you that they could not be downloaded, I would try reinstalling OS X through OS X Recovery, by holding down Command and R keys while your Mac is starting up

Can't create new partition

Hello.
I have a problem. I want to install WinXP via BootCamp and can't create new partition for it.
BootCamp Assistant crashes during partitioning (kernel panic), and when I use Leopard installation disk and try to create new partition in Disk Utility on DVD, it returns an error "No space left on device".
I repaired my hard disk many times (all errors were repaired) and still no improvement.
I don't want to format my disk to zero, because I don't use Time Machine and it would be really difficult to restore all the data.
Thank you in advance.

Use Disk Utility Restore to copy your internal drive to an external USB/FW drive. Then reformat.

Problem in Creating New partition in Pavilion dm4 1217TX

I have a hp Pavilion dm4 1217TX model laptop. I want to partition the hard disk (640GB) to separate the OS to the data. I think this is a very basic safety feature that will save my data in case of Windows failure (which is a very common problem). I have already split the C Drive and the new condition of my hard drive is
System           199 MB       Primary
C                        70 GB       Primary
Unallocated   494 GB       Logical
Recovery           32 GB       Primary
HP Tools        103 MB      Primary
Now I can't create partition in the Unallocated space because of 4 Primary Partition it already has. Now what can I do ? I can't understand that why it comes with four Primary Partition and without any Extended partition.

Hi, there, I have the same problem with you, because of the OEM of the laptop, they have partitioned our hard drive in advanced, however this partition is not logical. As we know, when we install Windows7, the system partition and system reserved partition are set as primary partition without doubt, but how could they make the HP tools and other partition as primary partitino too. I'm very unhappy with this. I don't know WHAT are they thinking about. Every one who has a bit comptuer knowloage knows the rules of createing new partitions in Windows. In my situation, I could only copy the data on recovery to C drive, then delete it. and recreate logical partition, then copy it back. Hope this could also help you.

Cannot create new folders in Outlook

I just bought a new PC computer. I installed MSFT Office Professional Plus 2010. I opened Outlook and added in (i) the pst folder I had set up from my previous Vista
computer (also with Outlook 2010), (ii) my hotmail account, (iii) my at&t/yahoo account and (iv) my gmail account. I cannot create new folders in any of them.
When I right click anywhere in the navigation pane and select "New Folder..." I get the following error message:
"Outlook cannot read the registry information.
-Close and restart Outlook.
-Reinstall Outlook
-Reinstall Microsoft Exchange or other e-mail system."
I tried all three, including removing and reinstalling Office and removing all of the email accounts/pst files and re-adding and still have the problem.
If I try to right-click properties on any of the accounts, I get the same error message, with the following additional language first:
"Cannot display 'General' page. This page will remain visible, but is not available."
Not sure what is left to try.
Appreciate any ideas.

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, If the PC from clean install, you can follow these steps to test this issue.
1.
Start the Outlook in safe mode,
Press and hold the CTRL key,
and then click Outlook.
If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Office program, we can try to disable them.
2.
Create a New profile & PST file to test this issue
If this problem does not occur in the new Outlook profile & PST, the old Outlook profile is corrupted. We can delete that and use a new Outlook profile.
3.
Make sure the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office
key permissions to allow full permissions to all users
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might
occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how
to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756  How
to back up and restore the registry in Windows
a)
Exit Outlook if it is running.
b)
Click
Start, and then click Run. Copy and paste (or type) the following command in the
Open box, and then press ENTER: regedit
c)
Locate and select the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office
d)
On the
Edit menu, click Permissions.
e)
Click the registry key for the user who is currently logged on, and ensure that
Read and Full Control permissions are both set to
Allow.
f)
Click the Advanced button, ensure that the user who is currently logged on is selected, that
Full Control is listed in the Permissions
column, and that This Key and Subkeys is listed in the
Apply to column.
g)
Click to select the Replace permission entries on all child objects with entries shown here that apply to child objects check box, and clear
the check box
Windows 7: Include inheritable permissions from this
object’s parent
Windows XP: Inherit from parent the permission entries that apply to child objects. Include these with entries explicitly defined here.
h)
When you are prompted to continue, click Remove.
i)
Click Apply, and then click Yes when you are prompted to continue.
j)
Click OK, and then click OK again.
k)
On the Registry menu, click Exit.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

HT5577 i bought recently a second hand apple i phone 4s but now i cannot creat new apple id

i bought recently a second hand apple i phone 4s but now i cannot creat new apple id .

I suspect you're referring to the 3 free iCloud account limit on an iOS device. If so, there's no way around this. Once that limit is reached, you'll have to create the iCloud account on another iOS device or computer, then setup that account on your phone.

Repairing Boot Camp after creating new partition

I'm running OS X 10.8 and Windows 7 x64 Pro.
After properly setting up Boot Camp to dual-boot Windows on my Mac mini, I decided to test whether or not it was true that creating another partition (a data partition for OS X) would interfere with Boot Camp. Wikipedia claims it does interfere but without citing a source, whilst the Boot Camp documentation itself only specifies that the disk must be a single partition _prior_ to setup - there's no mention of whether the disk must be _kept_ that way afterwards.
I opened Disk Utility, reduced the size of my OS X parition from 420GB to 80GB, and created a new partition in the unallocated space. Here's how it looks now:
When I attempted to proceed with the process, I did receive a warning that doing this (and I quote), "may" cause problems with Boot Camp. Seeing as it was inconclusive, I thought I'd give it a shot - nothing ventured…
Of course, it borked Boot Camp, otherwise I wouldn't be posting here. Whilst OS X boots just fine, the Boot Camp partition now no longer shows up in the Startup Manager, though it does in the Startup Disk prefPane. If I do attempt to boot into Boot Camp, I receive the following message on a black screen:
No bootable device --- insert boot disk and press any key
The advice given to someone who had this same problem was, "fix your damaged Boot Camp volume." But I'm at a loss as to how to do that.
So, anyone know how to proceed now so that I can keep my partitions as is, whilst fully restoring normal Boot Camp functionality?

Hi,
@Christopher Murphy:
Okay, you seem confident. Let's give this a shot. I use the command-line myself for the odd thing, so I'll try not to bail.
Results of the "sudo gpt -r -vv show disk0" command:
gpt show: disk0: mediasize=500107862016; sectorsize=512; blocks=976773168
gpt show: disk0: PMBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 976773167
      start       size index contents
          0          1         PMBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6
         40     409600      1 GPT part - REDACTED UUID
     409640 156303528      2 GPT part - REDACTED UUID
156713168    1269536      3 GPT part - REDACTED UUID
157982704 659841040      4 GPT part - REDACTED UUID
817823744     262144
818085888 158687232      5 GPT part - REDACTED UUID
976773120         15
976773135         32         Sec GPT table
976773167          1         Sec GPT header
Results of the "sudo fdisk /dev/disk0" command:
Disk: /dev/disk0          geometry: 60801/255/63 [976773168 sectors]
         Starting       EndingSignature: 0xAA55
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 - 976773167] <Unknown ID>
2: 00    0   0   0 -    0   0   0 [         0 -          0] unused
3: 00    0   0   0 -    0   0   0 [         0 -          0] unused
4: 00    0   0   0 -    0   0   0 [         0 -          0] unused
Does this indicate a fix is possible?

Creating new slice existing drive

Hi theres
I have 40 GB HDD in which I created 10 GB partition for solaris. Now I want add another 10 GB partition from existing 30 GB. When I created new partition I am confused about how to recognize it as slice & then creating new filesystem on it by newfs.
Please if anybody can help me step by step.
Thanks.

Hi,
Its looking that you are trying to create/work on Matching/Mismatch of Intercompany through reports.
These match and mismatch reports can be created in "Reporting" section in HFM itself.
Here in two different sections, you can mention the ICP accounts/combination and also mention their matching Account/combinations.
The two sections are matched against each other.
Try it
Mark as Answer/Helpful
and revert back if something concerns you
Regards,
J

I am getting error in createing new partition. orr error -14074

Hi , getting error in creating new partition as "ora-14074" partition bound must collate higher than that of the last partition"
Oracle version is - 9.2.0.6
OS version - SunOS

Hi,
show the statment that you want to create a new parition, and did you keep in mind the highest partition bound? Anyway, the problem seems to be easy to fix:
http://www.dba-oracle.com/t_ora_14074_partition.htm

Cannot create new folder?

I have just moved to a new hosting and have connected to it
and I can edit files. When I try to add a folder to the remove I'll
get
"An FTP error occured - cannot create new folder .
Access denied. The file may not exist or there could be a
permission problem".
Any idea?

Hi,
Did you make any changes before the issue appears?
Before going further, you may try the
system restore to go back to a previous status and check the result.
Tracy Cai
TechNet Community Support

Cannot Create New Mailbox

Hi all,
First of all I already create a similar thread : http://social.technet.microsoft.com/Forums/en-US/b8f88745-ca79-43f9-8857-3b87781e5c19/rbac-to-create-mailbox?forum=exchangesvradmin
I got a problem in my Exchange Server 2013 environment. I cannot create new mailbox (new user) from ECP. But I can create new mailbox and choose existing user.
Active Directory operation failed on DC.mydomain.com. This error is not retriable. Additional information: Access is denied. Active directory response: 00000005: SecErr: DSID-031A121F, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0
already try with no luck :
re-inherit the permission.
setup /prepareAD
I create new user and assign Org Management & Domain Admin
how to check whether the permission in my AD is correct ? or any idea should I start troubleshooting ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Krisna Ismayanto | My blogs: Krisna Ismayanto | Twitter:
@ikrisna

solved by executing setup.exe /preparedomain
and I found one of the server in container ADSIEdit were disabled inheritance. execute setup.exe /prepareAD, reboot the server (because it
ask for it), then execute setup.exe /preparedomain
cheers ! :)
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Krisna Ismayanto | My blogs: Krisna Ismayanto | Twitter:
@ikrisna

BootCamp cannot create new partition on drive free space.

Similar Messages

Maybe you are looking for