Creating new slice existing drive

Hi theres
I have 40 GB HDD in which I created 10 GB partition for solaris. Now I want add another 10 GB partition from existing 30 GB. When I created new partition I am confused about how to recognize it as slice & then creating new filesystem on it by newfs.
Please if anybody can help me step by step.
Thanks.

Hi,
Its looking that you are trying to create/work on Matching/Mismatch of Intercompany through reports.
These match and mismatch reports can be created in "Reporting" section in HFM itself.
Here in two different sections, you can mention the ICP accounts/combination and also mention their matching Account/combinations.
The two sections are matched against each other.
Try it
Mark as Answer/Helpful
and revert back if something concerns you
Regards,
J

Similar Messages

Creating new/ modifying existing interco mismatch report

Can someone help me understand how I can modify an existing interco mismatch report or create a new one in HFM? I am familiar with financial reporting studio but that does not not seem to be where you work with mismatch reports. Any help would be greatly appreciated. Thanks in advance.

Hi,
Its looking that you are trying to create/work on Matching/Mismatch of Intercompany through reports.
These match and mismatch reports can be created in "Reporting" section in HFM itself.
Here in two different sections, you can mention the ICP accounts/combination and also mention their matching Account/combinations.
The two sections are matched against each other.
Try it
Mark as Answer/Helpful
and revert back if something concerns you
Regards,
J

BootCamp cannot create new partition on drive free space.

Hi Folks,
I am hoping for some advice here. I am running OS X (10.5.6) and wish to use Boot Camp to created a partition to install Windows XP SP2 for some gaming. My machine is a late 2007 MBP 2.4GHz C2D, 4GB RAM, 340GB WD transplanted hard drive.
I have about 180GB of free space for a new partition to be created for the XP install.
When I fire up the Boot Camp Assistant tool, I am immediately informed of the following:
"The startup disk cannot be partitioned or restored to a single partition."
"Back up the disk and use the Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using the Boot Camp Assistant again."
+ I have never had more than one partition on this drive.
+ I installed the drive new with no partition and used a tool named 'Carbon Copy Cloner' to transfer data from the original drive onto this drive, the machine booted right away and I have been using it without issue ever since.
+ I have run Disk Utility to 'Verify Disk', 'Verify Disk Permissions' and 'Repair Disk Permissions' all ran with no problems and completed successfully.
My question is, how can I make a usable backup copy of the drive to restore back to the drive after performing the re-format?
Can I use the Carbon Copy Cloner software for this? I want to make sure that the resulting internal drive is bootable, etc.
I have been running Time Machine as well and have a disk full of backups from that app, but I have no idea how to use it to restore the drive to it's current state after re-partition and format.
Thanks in advance for any and all suggestions.
John

So today I used the free "trial" version of SuperDuper to create a bootable clone of my primary internal drive.
It was about 100GB and took a long time to copy onto USB 2.0 external SATA drive, but it worked.
SuperDuper provided the option to make the copy the boot device as well. After reboot, I used OS X Disk Utility to erase primary drive.
I then performed the operation in reverse, copying the entire contents back to the original location.
After a reboot, I ran the Boot Camp Utility and received the same aggravating message which I received before.
How can I be sure that I am actually re-formatting the target drive in order to consolidate free space? Is this my issue? When I performed the erase operation, I skipped the "zero out free space" step. Am I using the correct utility to prepare the target drive?
Once again, any and all help is greatly appreciated.
Regards,
John

Can't create new files after moving to ext drive, LR4

I moved all photos to a new ext drive (they used to be on the c drive); reformatted my desktop computer; reinstalled LR4.
Now there is no parent file under the name of the ext drive on which I can right click and "create a folder inside....". I am able to create new folders in the existing subfolders.
There is also no way to sync the drive to find a new folder I created via Windows explorer.
My filing system is by month and year so now with each passing month I am not able to set up a new file.
Help!

Can you right-click on a folder name in the Lightroom Folder Panel and select "Show Parent Folder"?
Can you import new photos directly to the desired folder in the desired location?

How do I transfer an existing Aperture library to a new external hard drive

I have a new external hard drive where I want to store my pictures to free up room on my iMac
How do I take an existing Aperture library and move it to the external hard drive so that Aperature can find and use it? Once it is moved can I delete the library from my iMac without causing problems with my new hard drive library?
thanks

Hello Barty,
is your library referenced or managed?
If your Aperture Library is managed, then you can simply copy it to your new external drive using the Finder. Make a backup of your old library and convince yourself that the backup is working.
If your library is referenced, then use Aperture to relocate your master image files to the external drive (select all images, then File -> Relocate Master), then copy your Library to the external drive using the Finder.
To point Aperture to the new library location, double click the new Aperture Library to open Aperture with it. Test it thoroughly, before you delete the original library.
You might consider only to relocate the master images to your external drive and to leave the then much smaller Aperure Library on your system drive. That way Aperture will work faster, and you will be able to browse and share your images, even when our external drive is not connected.
Regards
Léonie

How to create new folders on iCloud Drive from iOS or with document picker?

Recently I wanted to share several files from my iWorks suite with my colleagues. I do not want them to edit these files, instead I made templates in Numbers for easier management of hours worked. Everyone could download their copy and keep a track of their hours themselves. The problem is, not everyone has an Apple product.
Unfortunately, iOS does not support native browsing of iCloud Drive (except the document picker, which, to me, isn't helpful at all), the only way I know of - to create a new folder - is to open iCloud.com in Safari, request the desktop site and make a new folder from there.
Is there another way of creating new folders, preferably an official app from Apple or from within an iWorks app or the document picker that I do not know of? Or is this actually a missing feature?
Also, if Apple could make an app similar to Microsoft OneDrive, that would be great.

Yes, there is a way. Here is the workaround. You can add notes folders directly with your iPad or iPhone.
http://keeplifesimple.weebly.com/1/post/2013/11/add-folders-to-native-notes-app- on-ios.html
Enjoy! Please pass it on, leave a comment on the page, or "like us" on Facebook if you find this information helpful.

Create new Equipment (t-code IE01) for existing asset

HI Expert,
I have an enquiry on equipment creation via t-code IE01 for existing asset. There are synchronization between Asset Master and Equipment Master which mean both sides will be updated during the creation and changes of master data.
I have create new equipment master via t-code IE01 and has tagged to the existing asset. However after save the creation, new inventory number was generated to the asset master and had overwrite the existing inventory no. Is it because of the synchronization or it is a system standard?
Your answer is highly appreciate.
TQ.

My configuration is "Direct Synchronization After Saving" for both master data (asset master & equipment master).
However, I did not assign the Inventory No Field in asset master as a synchronization with equipment master, so how come system can re-generate new inventory no and overwrite the existing inventory no in the asset master? and what the solution if we do not want system re-generate new inventory no in asset master since it has been effected on the printing barcode sticker for the asset.
Really appreciate your answer.
TQ.

I just saved my iphoto original library to my external hard drive, now how do i create new space on my hard drive and create a new iphoto library

i just saved my iphoto original library to my external hard drive, now how do i create new space on my hard drive and create a new iphoto library

Trash the copy of the library you just moved. Then Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
But do you want to have two iPhoto Libraries? Why not just use the one on the External?

Can't create new folder on an external hard drive, and how to transfer files?

Hello everyone,
the non-English speaking videographer I translate for is having problems operating his Premiere CS5 for Mac from an external hard drive. He cannot create new folder on the external hard drive (the "New Folder" button is grayed-out when tries to export media onto the external hard drive) and when he simply tries to create new folder, the "new folder" option isn't available.
He suspects it's because the hard drive was formatted for PC.
Questions:
- should PC-formatting cause that problem?
- what's the proper way to transfer media files from PC-formatted external hard drive to the internal hard drive on Mac?
Would appreciate your advice.
Dimitri Vorontzov

He is right on the money
Now, for the sad or FAT part. You need to format the drive as FAT32 to make it work both on PC and MAC but, and that is a big BUT, the max file size of any given file will be 4GB. I haven't treid other formats yet, like the journaled MAC OS extended, but I don't think that would work. We transfer our files through or own gigabit network so I never had to try it, other than FAT32 formatted SDHC cards.

Creating new records while querying existing record

Hi,
I have one master - detail form.
First i created 1 record. Request ID is the primary key. Now request id generated. For ex.: 10
Request Id, date, requestor , location, status fields are in header block.
In lines block, i hv some other fields.. and one field called 'Activity'.
While creating first record, the activity will be 'New'.
Then i'll query the record '10'.
when i'm changing the activity 'New' into 'Upgrade', it should create new record with new request ID.
How to do this?
I hv written procedure that, i'm taking field values to local variables. Then assigning the local variable values to field values.
It is not creating as new record. It overwriting the existing record with new values. Existing record is missing.
Pl. give steps.
Thanks
Kavi

Hi,
Okk, you will have to do two things. Create two trigger on block level on which you want to do your changes.
1. First trigger. (PRE-UPDATE)
In pre-update trigger u will have to write the complete insert statement into the same table with new req id. like
DECLARE
vReqNo DATA_TYPE;
BEGIN
SELECT MAX(REQ_ID)
INTO vReqNo
FROM your_table;
INSERT INTO your_table
(req_no, fields....)
VALUES
(vReqNo, :forms_values);
END;
2. Create 2nd trigger on block level (ON-UPDATE)
write in this trigger
NULL;
for viewing the inserted record. What u have to do is in ON-UPDATE after null; create one timer NO_REAPEAT.
and in timer u will have to set the block property to req_id = generated_req_id_from_pre_update_trigger and
execute_query;
hope it will work...
-Ammad

How to create new or delete the existing row in the grid....

hi my friends...
i am developing report using Reuse_alv_grid_display...
my requirement is... At runtime
          1. i may create new row on the grid (empty row inwhich i may enter the data).
          2. i may delete a existing row in the grid
          3. i may edit the existing data...
then i have to trace the modification in the grid in one internal table...
how can i get into this.....
note:
i have some idea to edit the existing record in the grid and trace those modification,
but i don't know abt how to create new or delete the existing row....
can you give me some idea...

Hi deva,
write a class which implemets these methods
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
    METHODS:
To handle the toolbar on alv
     handle_toolbar
       FOR EVENT toolbar OF cl_gui_alv_grid
          IMPORTING e_object e_interactive,
To handle the buttons on the alv grid
     handle_user_command
       FOR EVENT user_command OF cl_gui_alv_grid
       IMPORTING e_ucomm.
endclass.
Now Implement these methods.
CLASS lcl_event_receiver IMPLEMENTATION.
To handle the toolbar on alv
METHOD handle_toolbar.
   DATA ls_toolbar TYPE stb_button.
    CLEAR gs_toolbar.
    MOVE 3 TO gs_toolbar-butn_type.
    APPEND gs_toolbar TO e_object->mt_toolbar.
    CLEAR gs_toolbar.
    PERFORM icon_create USING 'ICON_INSERT_ROW' gs_toolbar-icon.
    MOVE text-010 TO gs_toolbar-function.
    MOVE text-012 TO gs_toolbar-quickinfo.
    MOVE ' ' TO gs_toolbar-disabled.
    APPEND gs_toolbar TO e_object->mt_toolbar.
    CLEAR gs_toolbar.
    PERFORM icon_create USING 'ICON_DELETE_ROW' gs_toolbar-icon.
    MOVE text-011 TO gs_toolbar-function.
    MOVE text-013 TO gs_toolbar-quickinfo.
    MOVE ' ' TO gs_toolbar-disabled.
    APPEND gs_toolbar TO e_object->mt_toolbar.
ENDMETHOD.
   METHOD handle_user_command.
In this form, check the function code(e_ucomm has the function code), based on that do the required action.
as i said yesterday(i.e for appending a row, deleting a row, modifying a row)
    PERFORM user_command USING e_ucomm.
ENDMETHOD
endclass.
Before calling the alv method, create a object of this class.
DATA :
      gref_event_receiver TYPE REF TO lcl_event_receiver,
      gv_tables_alv          TYPE REF TO cl_gui_alv_grid.
      CREATE OBJECT gref_event_receiver.
      SET HANDLER   gref_event_receiver->handle_user_command
                    FOR gv_tables_alv.
      SET HANDLER   gref_event_receiver->handle_toolbar
                    FOR gv_tables_alv.
check this program for event handling, it is the similar way
demo_abap_objects_events
Hope u understood this.
Regards,
Prasant
reward if helpful

Problem in creating new versions for existing DIR using CV01N

I am working in SAP ERP 6.0 EHP 4.0 system.
I have problem in creating new versions for existing DIR using CV01N
I create a DIR version 00 with functional location and mpd cycles. Then when i try to create a new version by copying the contents created from already created document.I change the MPD cycles in the new version and save it.
once when i display the first document created the mpdcycle specified in version 01 is copied to the 00 version.
The document is inconsistent where versioning of document doesnot work properly wrt MPDCYCLE and MP HEADER.
The problem which i found was the document identification guid remains the same for all the document versions getting created.
The same is working fine in SAP ERP6.0 EHP3.0 sytem.
Please someone help me in resolving the above issue.
Regards,
Prasad.B

There is a change in the standard code.The reason for the above problem was because of a missing Enhancemnet point in a standard function module 'CV110_DOC_CREATE_WITH_TEMPLATE'.
IS-ADEC-MPD - Enhancement to copy MPD data
ENHANCEMENT-POINT CV110_DOC_CREATE_WTEMPL_01 SPOTS ES_SAPLCV110.
+*$*$-Start: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
+**ENHANCEMENT 1 ZSF_AD_MPD_SAPLCV110.    "active version**+
+*** copy MPD relevant data from templ. doc to current doc**+
+**CALL FUNCTION 'MPD02_COPY_MPD_DATA'**+
    +**EXPORTING**+
      +**is_draw = ls_draw**+
    +**TABLES**+
      +**ct_drad = lt_drad.**+
+*ENDENHANCEMENT.**$*$-End:   CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
Created a custom enhancement point similar to SAP ECC6.0 EHP 3.0 system.
The reason was the buffer was not getting cleared previously.After inserting the above code the DIR's are getting created withot any issues.
Regards,
Prasad.B

How to create new genius playlists from existing music in library?

I tried the genius button for creating lists from existing music in my library. The problem is that it continues to show the first list created no matter what song I highlight then hit the genius button. Genius works fine for creating lists I can purchase online, but not new ones from my own music.

This is the iTunes for Mac forum.
As you are running Windows you will probably get a better response from posting in the iTunes for Windows forum:
http://discussions.apple.com/category.jspa?categoryID=150

Create a new bootable hard drive with XP - without CD reader

All,
   Since couple of years my Satellite CD reader is dead. Most probably an hardware failure, the CDs are spinning but that's all ... unbale to read them at all.
As the PC is getting slower and slower, I decided to refomat and re_image it.
    As I can't use the CD reader, I have to create the bootable hard drive (with the XP-Home edition provided when I bought the laptop) using another machine (A DELL or a Toshiba Portege I have also at home).
    For that I remove the hard drive fro, the satellite and put it in the other machine, and then reinstall windows ont it.
Everything went fine, untilI plug back the satellite hard drive to its original host (Satellite machine.
It refuse to boot and stop just after loading the MUP.Sys drivers (classique as the hardware is diffrent)
   My questions are :
   1. Any way I can create a proper bootable drive for Satellite 5105-S501 in such conditions (any place I can download an image for it)
   2. I can' enter the BIOS (ESC key do not let me in, F1 and F12 same ...). Any way to force to enter in the BIOS
   ESC key just show me the message : Type F1 for default :_°
Thanks
P.

Malcolm:
Thanks so much for replying to my question! I am new to MAC and have Tiger and Windows XP on separate drives. I will be removing the drive with Tiger and putting in a new drive to load Leopard and I wondered how that would effect accessing Windows XP since the Windows drive will remain in the system. Is there anything I need to do with bootcamp, since Windows was loaded using the Beta version of bootcamp, and bootcamp icon currently shows in the Windows XP taskbar. Tiger was pre-loaded when the computer was purchased. In fact I had to backdate the beta bootcamp version in order to get it to work. I hope this is not asking too much, but I wondered if there would any problem with Windows after the Leopard load.
THANKS IN ADVANCE!!

How to create new solution from Existing solution in integration services on TFS project?

Hi,
I am working on SSIS Project and it is created in VS 2008 .I opened the solution in VS 2010 and it is upgraded and unfortynately i don't have the back up to re open it in VS 2008.I am thinking of creating new solution from the existing one and open the new
solution in VS 2008.I was struck how can we copy existing solution to new solution on TFS.
Please let me know will this process work? and also how can we create a new solution without losing any files.
Any help is appreciated.

Hi moh1kumr,
As Joost said, you can try to revert the changes back for the checked in files in TFS. For more information, please see:
http://msdn.microsoft.com/en-us/library/ee371161(v=expression.40).aspx
http://stackoverflow.com/questions/2694644/how-to-revert-roll-back-a-checkin-in-tfs-2010
If it doesn’t work, I am afraid you have to design the package in VS 2008 from scratch.
Regards,
Mike Yin
TechNet Community Support

Creating new slice existing drive

Similar Messages

Maybe you are looking for