Bootcamp Windows 7 (64) Drivers

After 2 days of struggling to find the right way to install Window 7's drivers properly I'm out of ideas. I've installed Windows 7 now twice with no issue, it just seems I can't get a single driver to work for me. I'll list the specs of my computer and then list what I've done in order to see what else we can do.
Late 2012 MacBook Pro 13-Inch
OSX V. 10.8.2 (Mountain Lion)
2.5 Intel i5
4 GB DDR 3
And what I've done
1. BCA Windows Support Software download to CD/DVD or Drive (multiple times) with NO luck. My error message reads "Can't install Windows Support Software" every. single. time.
2. Tried an original retail download of Snow Leopard on Windows 7. This got me the furtherest, as it installed Boot Camp 3.1 but nothing else. While the installation lead me to believe it installed all the necessary drivers, Device manager tells me differently. No drivers were installed, regardless of what the install setup bars may have stated.
3. Pulled various different Bootcamp Update Patches from the downloads section in hopes something might give. Trying 2.0, 3.1, 3.2, 3.3, and 4.0, I still have had no success. Most of these attempts consisted of "corrupt file" errors or "This is just a patch install, not the full blow support software" message. 2.0 and 3.1 did install, however no drivers installed during setup or manually.
4. Frustrated at the fact not one driver installed, I'd hope to find an up to date Broadcom network driver to install some where online. After digging through forums, I found one. Downloaded the most up to date driver, (I took 2 other broadcom drivers below it just in case), installed the driver, and proceeded to verify. The driver did install correctly this time around yet once my password for my network went through I was prompted with a message stating "Windows can not connect to the network". After reading MORE forums, I was lead to believe this might be the wrong driver.
So how is I actually get the right driver? or the right support software for that matter? I'm truly exhausted after working on this for 10+ for 2 days straight, hoping to have this up and running so I can get back to work. At this point, I'd take a simple ethernet driver so that I can hardwire into the comp for the moment in hopes that Windows Update will pull the drivers through.
Thanks in advanced

Read and follow the Bootcamp Installation Manual. It is the first option when you run Bootcamp Assistant. After downloading and saving the Windows Support Software as described in the installation manual you run the support software from within Windows.
You should visit the Bootcamp forum https://discussions.apple.com/community/windows_software/boot_camp

Similar Messages

Bootcamp windows 7 drivers aren't installed (network). How can i get these. currently i can't event access the internet on the windows side, because there aren't the drivers, HELP???

help. windows 7 side doesnt have the network drivers.

brandon945 wrote:
help. windows 7 side doesnt have the network drivers.
You download the Windows drivers using Boot Camp Assistant, on the Mac side (If you have Lion), if you are running Snow Leopard they are on your OSX installation disk.

Bootcamp no device drivers found (Windows 7 64-bit)

Hello,
I am desperately trying to install Windows 7 64-bit on my mid-2011 MacBook Pro, on a 100g partition made by Bootcamp.
My Macbook is using the latest Mavericks update OSX.
I am using a Windows 7 .iso trial downloaded from Microsoft DigitalRiver and am using the Bootcamp 5.1.5621, as advised by Apple staff on this website.os
I have an official and working Microsoft Windows activation code with which to activate the trial, once installed.
However, first of all, Bootcamp 5.1 fails to recognize the .iso file. So I burned the .iso to a DVD. I have downloaded the latest Bootcamp Windows Support drivers (as said, 5.1.5621) onto a fully functional and accessible USB drive, which is MS-DOS FAT formatted and inserted in the USB port the whole time.
Now Bootcamp detects Windows 7 on the DVD and starts the installation procedure. Macbook resets, Windows starts installing.
And then, after selecting language and OK'ing 'Install', I get the dreaded Windows Explorer screen informing me that 'No device driver has been found'. In the directories on the USB, I flip through all the files but no .exe or other executables are encountered.
As far as I can see, I'm doing everything by the book. So why isn't the book working?
Looking forward to your advice.

1. The USB needs to be USB2 not USB3.
2. From Boot Camp: System requirements for Microsoft Windows operating systems
Requirements for all Windows installations
In order to install Microsoft Windows using Boot Camp, you need the following:
An Internet connection
An administrator account in OS X to use Boot Camp Assistant
The keyboard and mouse or trackpad that came with your Mac (If they aren’t available, use a USB keyboard and mouse)
A minimum of 2 GB of RAM, 30 GB of free disk space are recommended if you are installing Windows for the first time, or 40 GB of free disk space if you are upgrading from a previous version of Windows
An authentic Microsoft Windows full install disc or ISO file
A built-in optical drive, or a compatible external optical drive is required if you are using an install disc
8 GB USB storage device, or external drive formatted as MS-DOS (FAT) to install the downloaded drivers
3. From Boot Camp 5.1: Frequently asked questions
Can I use a downloaded (ISO) version of Windows with Boot Camp?
MacBook Air (Mid 2011 and later), MacBook Pro (Mid 2012 and later, including Retina models), Mac mini (Mid 2011 and later), and iMac (Late 2012) can install downloaded (ISO) versions of Windows 7 and 8.

Help! bootcamped window pro 7 ok BUT driver / setup flash drive seemed to correctly install drivers, nvidia etc etc BUT on windows login screen i have no mouse or keyboard , have plugged in logitech usb mouse and keyboard still no good please help

Please can somebody help me with this.
i cannot get any mouse or keyboard input on my login screen after bootcamping windows 7 pro.
i used a correctly formatted drive for the driver downloads, they seemed to install but now i have no input method to login to wondows7.
all is fine in osx apple wireless mouse keyboard magicpad ok
windows cant login due to no input devices.
have connected logitech mouse keyboard still nothing.
please help!
thanks in advance

1. I have tried copying the Keyboard/Trackpad/Mouse drivers to the $WinPEDriver$ directory with mixed success on a 2012 MBP.
2. My experience is based on a 2013 rMBP. You may be able to use an Apple USB Keypad/Mouse to better success.
3. See http://www.macworld.com/article/2460820/macbook-pro-mid-2014-review-minor-update -offers-slightly-better-cpu-performance.html for HW differences between the two machines.
4. If you have access to a 2013 rMBP, I can suggest trying to build the USB on that and working with the USB to see if you can make it install Windows. the rMBP 2014 and rMBP 2013 have the same HW, except some CPU changes. You can also try building the USB at the nearest Apple store, if possible.
5. There is a section in AutoUnattend.xml, which is supposed to install all drivers in $WinPEDriver$ (see this http://support.microsoft.com/kb/2686316 )
<component name="Microsoft-Windows-PnpCustomizationsWinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DriverPaths>
                <PathAndCredentials wcm:keyValue="1" wcm:action="add">
                    <Path>$WinPEDriver$</Path>
                </PathAndCredentials>
            </DriverPaths>
        </component>

How are Bootcamp 5.0 drivers working on Windows 7 64-bit?

Hello,
I was wondering how the Windows 7 64-bit Bootcamp 5.0 Drivers are behaving. In this forum, I have read reports about the internal keyboard in MacBook Pros failing after installing the 5.0 drivers. A case like this is referenced in the forum post below:
No wired USB Apple-keyboard or USB-Mouse found under W7 64bit after Bootcamp drivers 5.0.5033
Could this be only a one-time issue? or I am planning to install Windows 7 on my MacBook Pro since installing OS X Mountain Lion 10.8 back in July. You can say procracination took over.
Many thanks in advance for your assistance!

You're trying to use a 32 bit Oracle Client with 64 bit SQL Developer.
You're doing something in SQL Developer that's requiring us to load OCI - in your connection properties, use Network Alias instead of Connect Identifier for TNS, or make sure in your Advanced settings you don't have 'Use OCI/Thick driver' enabled.
Or, install a 64 bit copy of the Oracle Client and tell SQL Developer to use that home instead.

Lee3 May 25, 2012 5:36 AM I have attempted to download with Bootcamp the Windows 7 drivers but the dowload will not progress past 25%! Is there someone that can assist me with this issue? : /

Lee3
May 25, 2012 5:36 AM
I have attempted to download with Bootcamp the Windows 7 drivers but the dowload will not progress past 25%!
Is there someone that can assist me with this issue?
:>/

How long did you wait for the download to run? The last time I downloaded the Windows support files for Boot Camp, it was going very slowly, so I swapped away to another task. Several minutes later I came back and it had moved a little, but not much, so I went on with other things. When I got back to it several hours later, the download had completed. Perhaps you just need to let it go overnight to perform the downloads...

My iMac keyboard not responding in Bootcamp Windows 8 with drivers installed

Hi,
I'm using late-2012 27.1 inches iMac and using Apple Wireless Keyboard, I've installed Windows 8 on bootcamp for a long time now, all drivers are working fine, keyboard is also working perfectly. Then one day, I decided to install a new controller driver from a software called DS3 Tool and when I installed the controller driver, the keyboard switches off and not functioning, I went over to the Driver Manager and it says my keyboard is offline, I checked the battery and it is full, i tried restarting, still not functioning, so I tried switch to Mac OSX, the keyboard works flawlessly but in the Bootcamp Windows, it does not. So can anyone help me fix this
Thank you

Please download BC drivers appropriate for your model from Boot Camp 5.1: Frequently asked questions - Apple Support and Boot Camp: Install or repair Boot Camp drivers.

I have attempted to download with Bootcamp the Windows 7 drivers but the dowload will not progress past 25%!

I have attempted to download with Bootcamp the Windows 7 drivers but the dowload will not progress past 25%!
Is there someone that can assist me with this issue?
:>/

You may have better luck posting in the Boot Camp forum, that is where the Boot Camp and MS Windows guru's tend to hang out.

HT4818 windows 8 drivers bootcamp

where could i download the last drivers for bootcamp (windows 8)?

Start Bootcamp Assistant then select the menu item to download the Windows Support software. But Windows 8 is not supported so there is no Windows 8 Support software.

Can't Download Windows 7 Drivers for Bootcamp?

Hi,
I have been trying since 2 weeks to download windows 7 drivers for bootcamp but the process just gets frozen at that point. I live in a 3rd world country and don't have a good connection. My DSL's speed is 2mb and I can easily downoad movies and hd seasons but because of the awesome servers of Apple, I can't download these much needed drivers.
Is there some direct linking to these drivers so I can download them or any other alternative?
Thanks a lot

Using Boot Camp is the only method to obtain the drivers, be patient and try again.

Bootcamp windows 7 listen to line in soundcard driver not installing

Hi there and thanks for reading.
Bottom line Bootcamped Windows 7
I just want to be able to HEAR my line in input in REALTIME not a 1-2sec delay like the "listen to device" thing in windows has by default.
I've tried to install realtek drivers however I get an error message.
I've attempted to install other drivers and those fail as well.
It's upsetting because litereally everything else works (minus the aircard for some reason but I dont mind using a cable) and the internal speakers.
If anyone has had the same problem and found a fix. please please do share.

I got to the same point as viggo. bootmgr was missing after restoring the partition with winclone.
i fixed the bootrecord of the cloned partition like this:
1) create a windows system repair disk. you can do this in your virtual machine. since you cannot boot from cd. you need to create the repair disk directly into an iso file. windows only lets you choose an existing cdrw drives, so you need to simulate a cd burner. use TotalMounter for this. its free and does exactly what you need.
the following steps have been done with parallels. don't know if this works with vm fusion
2) Create a new parallels vm and use the cloned, broken bootcamp partition as its main drive (if you start it right now, you get the same "bootmgr is missing" message)
3) mount the previously created system repair disc as a cd rom
4) boot from the cd room
5) run systemrepair to fix the bootrecord
6) windows is now booting in parallels and it hopefully does so directly from disk :-)

ExpressCard/34 not working in BootCamp Windows 7 64-bit. Apple's BIOS emulation does not give enough resources.

MacBook Pro unibody, 15" 2009
ExpressCard/34 (Card is by Transcend TS-RDF1, JMicron chip for SD card) is not working in BootCamp Windows 7 64-bit. Windows reports:
"This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system."
Other data points: Card works fine in Mac OSX, worked under Windows XP 32-bit (initially reported same problem, but works after reboot).
Checking the forums there seems to be no actual device suggested to actually remove that would help the problem. And even if it was, the concept is ridiculous. What other device would you like to remove? Display adapter? Network adapter? No way. I use all available devices and don't want to compromise.
It seems like BIOS emulation does not allocate enough resources to ExpressCard.
Are others having the same problem?
Does anyone have a fix for this?
Is there anyone at Apple who cares to provide a solution?

It is not a driver problem, but a problem in the BIOS emulated by bootcamp on some (not all) MBP models. So unless Apple fixes it in bootcamp, there is no real solution. And obviously, Apple doesn't care. They are dropping the Expresscard slot anyway.
Unfortunately, this poster seems right: http://forums.macrumors.com/showthread.php?t=912259 :
The 2008/2009 Macbook Pros don't allow to use the ExpressCard slot because of EFI/Bootcamp errors (Windows Vista/7 cannot allocate an IRQ to the slot). You don't need any drivers for using an ExpressCard slot on Windows, you only need the drivers for the corresponding card you are using.
Bootcamped XP allowed to use the slot, but you could not use hot-plugging.
And from the Sonnet site ( http://www.sonnettech.com/product/tempo_sata_express34.html ) :
Tempo SATA ExpressCard/34 not supported under Windows 7 or Windows Vista when running on unibody MacBook Pro computers. The problem is caused by the MacBook Pro's BIOS emulation, which doesn't allocate enough resources to support certain kinds of Expresscard/34 devices, such as a SATA controller, in these operating systems.
(added link to Sonnet's explanation)

Bootcamp WIndows 7 x64 and Syncmaster 204b external monitor

Hi,
I didn't see a sub-forum for external monitors so I hope the Firmware forum is ok since this seems like a drivers/graphics card issue issue.
The issue I'm having is that Mac OS crashes randomly when I connect my external Samsung Syncmaster 204b monitor to my Macbook Pro when running Windows 7 x64 under Bootcamp. The external monitor turns yellow and the Macbook LCD turns gray and I'm forced to do a hard-reboot. Windows does detect the monitor and I can see it with it's correct name under Windows Display Properties.
Everything works fine when I run the monitor under Mac OS 10.6.4.
I'm running Windows 7 x64 on a mid-2010 Macbook Pro 13". I have all of the latest updates installed for Windows and am using Bootcamp 3.1.
Has anyone encountered a similar issue or have any ideas how this may be resolved?
Thanks, -Scott
Message was edited by: Scott Cullen

Ok, I think this problem has been resolved, so I'll post the solution in case others with the Samsung Syncmaster 204B have the same problem. The answer was erasing the PRAM by holding Option-Command-P-R at boot up (http://support.apple.com/kb/ht1379).
This is what I think happened:
An update in Windows Update is available for the Syncmaster 204B, but wasn't visible when I first connected the Syncmaster. I wasn't able to see the update until I rebooted with the Syncmaster connected (after several crashes). After seeing the update in Windows Update under 'Optional Updates", called "Samsung - Display- 204T/204Ts/204B, Syncmaster Magic CX20Ts(digital)", I installed it, but bootcamp Windows continued to crash randomly after attaching the Syncmaster via both Mini Display Port-to-DVI and Mini Display Port-to-VGA. Sometimes it crashed after a few minutes, sometimes an hour, the same as before I installed the update.
I was convinced that it was a compatibility problem between Windows 7 x64, the Syncmaster 204B and the MacBook Pro 13" Mid-2010 hardware since this problem only happened when booting into bootcamp Windows 7 x64 (everything worked fine in Mac OS), but now that doesn't seem to be the case. I think the update fixed the problem, but after installing the update some of the of the original incompatible display settings remained resident in the Mac's PRAM. Erasing the PRAM cleared these settings and allowed the new updated settings to be loaded instead, fixing the crash issue.
-Scott

My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.

My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
Will not show up in safe mode, will not show when started from Windows 7 DVD.
I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
Can see the PC volume from Mac side with files.
I've looked at all the online solutions so far and have tried most of them without success. Please help!
Specs:
2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,2
Processor Name:          Intel Core 2 Duo
Processor Speed:          3.06 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP52.008E.B05
SMC Version (system):          1.42f4
Serial Number (system):          7302300GANE
Hardware UUID:          B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
Sudden Motion Sensor:
State:          Enabled

EDIT: RESOLVED
For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
Specifically, the posts by Dunsany and valkyr did the trick. I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally. I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again. I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time. Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black. I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
Hope this helps someone else!

Bootcamp - Windows 8.1 - Mac Pro (Late 2013) -- ATI Driver Crash

Hi All,
I have a open case with Apple as well on this but i can not seem to locate any information on this issue on the web at all.
Case: 601052633
Basically, we received a new Late 2013 Mac Pro, and out of the box proceeded to install bootcamp and windows 8.1.
After the install and the bootcamp drivers are installed the screen starts to display lines and the ATi drivers eventually crash.
If we uninstall the ATI drivers the screen is returned to normal and windows uses the generic drivers, however the graphics performance is degraded.
If we install the latest ATI drivers (downloaded directly from the ATI webpage) the display issues reoccur.
If left to run its path the screen becomes unreadble and eventually the system bluescreens.
To recap all the things I have done:
Straight out of the box we started the boot camp install. We use the latest Windows 8.1 Media.
Once the process is completed the PC reboots as normal and we install windows on the “BOOTCAMP” partition.
Windows installs without issue and when the bootcamp drivers window pop’s up it starts its install. At the “Chipset” drivers install the window starts to flicker, this appears to be normal but afterwards the screen shows “lines” on it. (these lines can be seen on image below)
Once windows is booted the lines remain and progressively gets worse. Image below shows the ATI Criver crash and the blue screen. This takes 2-5 seconds. And depends on how much you move on the screen.
Screen capture (shown Below) shows the issues, even with screen capture the issue is recorded.
If we uninstall the ATI display drivers the issue disappears.
Process of tests:
Install Bootcamp windows 8.1 on Mac pro 2013 out of the box – Issue recorded
Remove Bootcamp and update firmware on Mac.
Install Bootcamp windows 8.1 on Mac Pro 2013 – Same issue.
Updated ATI Drivers using ATI drivers off ATI website – Same issue
Uninstalled ATI Drivers – 2 Generic Microsoft video cards detected – issue removed but video performance degraded.
Updated Bootcamp Drivers – ATI drivers reinstalled – Issue returned
Removed bootcamp, restored system to factory settings via web install.
Installed Bootcamp windows 8 on Mac Pro 2013 – Same issues
Removed bootcamp restored System to default
Tried installing windows 7 – not supported
Installed Windows 8.1 and ran screen captures and diagnostics.
We have also tried using different display ports, Different display adaptors, Different monitors.
Mac OS is not affected.
Note Mac is “out of the box”, Windows is a next next next install. No changes or software is installed.
Any support would be appreciated.
Cheers
Steffen.
It Manager.

I had this exact same issue and had been hunting it down since i first received my Mac Pro back in May 2014. I researched the problem all over the place but I have no idea why i did not find this post, or in fact why Apple techs did not find this post either.
Bottom line: In my case I have pretty much proved this was a problem with the AMD FirePro D300 video card/s. They basically can't cope with Windows graphics needs.
I have a new Mac with D500 cards, and now the problem is almost completely gone. I can recreate if i run certain situations and a screen saver. Upon refresh, there is a chance the card will crash, but showing a slightly different outcome.
Having read the prior posts, the D700 may also have the same issue??
Longer story and background: I am not exactly an expert, but i did try many different things and probably spent in excess of 200 hours onto tech support and installing, reinstalling, trying different monitors, trying different software. Eventually i was so frustrated and in tears with this issue.
The major problem over all this time was the constant response from Apple that this was not an Apple issue since the Mac OS was not showing any issues.
I was at the time a new Mac convert, my brother had purchased the 'awesome' machine for me as a birthday gift, with the goal that we could play a specific game together. My disappointment in Apples inability to recognize or even attempt to recognize that this was related to the hardware in the Mac itself was constant and ongoing.
My final visit to the Apple store to again visit the 'Genius' bar came up yet again with the most senior tech in the store telling me that there were no problems identified with the hardware and that this was not their issue. Totally frustrating. I was rather hoping, in the good tradition of true geeks, that this would have been a challenge to hunt down. I was pretty sure they trusted me that this was not a standard Windows issue, and thus was hoping they would switch out individual pieces of components (video cards being my first choice) to see if that the problem repeated. Nope, didn't want to do it.
My response was to threaten with legal action - not something i enjoyed doing, plus that i would NEVER buy an Apple product again. Since I was a new business client, this may have had an impact.
This wonderful Manager at the store agreed that he wanted to take the hardware out of the equation and see if I still had the issue. So he, amazingly, agreed to refund in full for the machine and I could order a new one.
As i was convinced this was hardware related, since I had the Quad core, D300's, 12 gig machine and my brother had the top of the range six processor, D500s, 16gig memory machine which did NOT have this issue, running identical software, when i reordered the Mac Pro, I bumped it up to the D500s (still Quad core) and 16gig of memory (also had the 1TB drive partitioned 40/60 in bootcamps favor).
I tentatively installed windows after a couple of days of normal Apple usage (software updates included).
I then hammered the system with the same software and installs.
Its been up and running for perhaps 2-3 weeks now, and I have not seen the issue at all, other then when i had screen saver running and 4 instances of the game running (Everquest for those of you who are interested - but the software is almost irrelevant, since i have had this issue using internet explorer or Chrome).
So.. I urge Apple to review this issue with the D300s and either remove them from the configuration options or resolve the issue. One of the powerful selling things for this wonderful machine is its ability to run Windows in native mode. I like it because I also want to get into App Development, so the dual option boot option is just what i wanted.
Responding to us poor Windows installers with 'not my problem' simply isn't good enough and should never have been something i had heard.
All good now, I am happy with the end result, but I would like Apple to recognize this IS AN ISSUE THEY NEED TO ADDRESS.
I apologize if my technical knowledge is not a strong as it might need to be in relaying this information to you guys, but hopefully it all makes sense.
Paul

I need help transferring Bootcamp (Windows XP) from my old Macbook Pro to the new one. How do I make bootable clone of Bootcamp?

Hi I just got a new MacBook Pro I need help transferring Bootcamp (Windows XP) from my old Macbook Pro to my new Macbook Pro Mac OS X 10.7.4 2.6 Ghz Intel Core 17. How do I make bootable clone of Bootcamp?

you can't just move XP even if you took the hard drive and have Windows boot and function.
Apparently there are Windows tools to sanitize the OS and strip all the motherboard drivers and services.
Time to get a supported OS. Don't want to pay, then use 8 for the time until it goes on sale.
There are no drivers for even Vista on 2011 and later Macs.

Bootcamp Windows 7 (64) Drivers

Similar Messages

Maybe you are looking for