"Bottom" Setting not sticking in print calibration

Is anyone else noticing that in the print dialog if you have set the Bottom calibration it won't "stick" for long? In my case it ends up reverting to zero across sessions.
And I wonder why iPhoto can print to my HP printer/paper without calibration but Aperture overprints?

In the Print dialog there is a Calibrate button. This opens up a small dialog where you can enter offsets for top, bottom, left, right. There is also a button to print a test page which prints guides so you can determine the proper offsets. On my machine I can enter offsets for all 4 edges and all except the entry in the Bottom field stick (are remembered).
I'm on 10.4.11 as my profile says I'm using the HP drivers built in (but these offsets are in Aperture, not in the printer driver dialog).

Similar Messages

Windows 7 Thinkvantage Access Connections 5.41 does not stick to printer default

hi
i have installed windows 7 on 3 lenovo laptops (x60s, x61, t500) and installed AC 5.41 but and have configured them with 5 profiles each with their own default printer preferences but for some reason when i toggle from 1 profile to another the default printer setting does not change accordingly
this is really annoying as i have managed to print documents to the wrong printer a couple of times and it seems to be accross the board on all my windows 7 installations
is this happening to anyone else?
cheers

no i haven't
i have now deployed 5 thinkpads (x200 with lenovo windows 7 installation disk) and 4 X61 and T500's with my own windows build and downloaded all the thinkvantage software using system update (had to manually upgrade to 5.42 as system update did not pick up on the updates)
the printer default sometimes swaps over but often it just defaults to the original ms windows xps writer and not the the one i had specified.
very frustrating, luckily a lot of my users do not switch locations very often and only print from 1 location but i have some laptop roll outs planned for users who do use this printer default settings a lot and i will get some stick for this.

Scroll Direction setting not sticking

I have a iMac running Mountain Lion. I prefer not using the "Scroll direction: natural" so I removed the check within the Mouse System Preferences. I exit out of System Preferences, open any browser (Safari, Firefox or Chrome) and the check in "Scroll direction: natural" reappears. I have tried removing the check and rebooting but unfortunately the check in "Scroll direction: natural" reappears each time.
Any ideas how to fix this
Thanks

Nancy,
Are you still running 10.6.2?
If you are run this update:
Mac OS X 10.6.8 Update Combo v1.1

I reset my iPhone 5s yesterday because my fingerprint bottom is not working. It says that failed every time I was trying to put my print... Now that I reset my phone the fingerprint pass code do not appear in the setting.

I reset my iPhone 5s yesterday because my fingerprint bottom is not working. It says that failed every time I was trying to put my print... Now that I reset my phone the fingerprint pass code do not appear in the setting.

Hi Emilemny,
Welcome to Apple Support Communities.
The TouchID settings will not be available until you create a passcode, see the article linked below for more information.
iPhone 5s: Using Touch ID
http://support.apple.com/kb/HT5883
You can set up Touch ID in iOS Setup Assistant or by tapping Settings > Touch ID & Passcode. To set up Touch ID, you must first set a passcode. Touch ID is designed to minimize the input of your passcode, but you need a passcode for additional security validation, such as enrolling new fingerprints.
-Jason

Trying to print a jpeg (not a photograph). No matter what setting i select, it prints in landscape. How do I get portrait printing?

Trying to print a jpeg (not a photograph) in Elements 12. No matter what setting i select, it prints in landscape. How do I get it to print in portrait?
Second question. What is the fastest way to change the number setting (0 to 12) for an existing photo so that the file size is smaller?

kkbadobe wrote:
Trying to print a jpeg (not a photograph) in Elements 12. No matter what setting i select, it prints in landscape. How do I get it to print in portrait?
Second question. What is the fastest way to change the number setting (0 to 12) for an existing photo so that the file size is smaller?
Go to File>print in Editor. In the dialog that comes up, you should see "Page Setup". Select "Portrait".
This assumes that the file is in portrait orientation as well, before sending it to the printer.
As for question #2, I am unaware of a numeric sequence such as you would like in this program. You can alter file size via File>save for web, however.

[svn:osmf:] 14871: Fixing anchoring 'right' and 'bottom' properties not being applied on items that don't have a width/ height and position set.

Revision: 14871
Revision: 14871
Author:   [email protected]
Date:     2010-03-19 01:05:54 -0700 (Fri, 19 Mar 2010)
Log Message:
Fixing anchoring 'right' and 'bottom' properties not being applied on items that don't have a width/height and position set.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/layout/LayoutRenderer.as

If you're just doing it in a back and forth or spiral fashion, you don't need to check whether a square's been filled in. You just go from a start point to an end point. Those points and the squares in between are determined by simple arithmetic.
If you're doing it randomly, I wouldn't use the GUI elements themselves. I'd have, for example, and array of booleans that tells whether each square has been filled in.

Energy saver settings do not stick when set in system preferences

For some reason when I restore the default settings for the energy saver settings, the settings go back to a custom setting I set months prior of Display Sleep at 1 minute.
Here is what I am doing:
Going to "System Preferences"
Going to "Energy Saver"
Pressing the button "Restore Defaults"
Everything goes back to the default settings of Computer Sleep of 10 minutes and Display Sleep of 10 minutes and I close the window out.
Problem happens: A bit later I come back to my iMac and wake it up, the setting is back to 1 minute of Display Sleep (which I did months ago, I no longer want that).
I have even locked the setting to prevent further changes. Which locks the settings in place like it should I believe. However, once the iMac sleeps and I wake it up in a couple of hours it switches back to the old setting I made months ago, 1 minute of Display Sleep, which I no longer want.
Thanks in advance for any assistance!

i have the opposite problem... i would like to use custom Energy Saver settings but they will not "stick." instead they keep returning to the default settings. i followed the advice on this thread, thinking it might solve my problem too. but it did not. any suggestions?
i had one hunch - that it might have something to do with the file of same name but with ~orig at the end (see image below). should i remove the other file as well?
thanks!

PCI-6023E Boards calibrated at NI are not updated & listed in print calibrated document

PCI-6023E boards calibrated at NI are not updated in my devices- print calibration records.
Lee Bohot
713-254-4825
[email protected]

I am refering to the NI website-MyNI/My Registered Products/On-line Calibration Certificates. When I enter a PCI-6023E serial number that has been recalibrated in Jan. '03 by NI, the web site says the device is out of calibration, but I have received a new calibration data sheet for the latest calibration. Will this new calibration be reflected in the web site?
Thank you,
Lee Bohot
Lee Bohot
713-254-4825
[email protected]

My computer does not see my printer

Hi: I am having a problem with my HP Photosmart 4500 printer. My computer does not see it. I have a USB connected to it, have uninstalled and installed the software two time, dowloaded the latest update and nothing. Add to that, I can not connect it by WIFI. WIFI on the printer is on but again, it's no where on any of the screens. The only variable I can think of that has changed has been the router I got recently from AT&T. Everything else works with the WIFI but no computer. I'm running 10.7.5. I have read the install instructions and nothing seems to be working. The one thing I do get from the HP install disc is a message reading the printer isn't recognized but there are no updates in support. OK, what am I missing here?

Try these steps to uninstall the current software using the HP scrubber and then reinstall using the current HP driver available through Apple.
To do so, perform the following steps:
1. Go to Applications/Hewlett Packard/ and then click on “HP Uninstaller”
2. Next click “Continue”
3. Highlight the device on the left pane.
4. Press and hold control+alt+command on the keyboard simultaneously while you click on “Uninstall”.
5. After you do this, you will see a pop up that asks you if you want to uninstall all HP software. Please note, that in doing this, it will remove any other HP printers that you also have installed.
6. Click “continue” and wait for the program to finish.
7. After it completes, reboot your computer.
Once the computer is back on, do the following steps:
WARNING: This is will delete all of your printers.
1. Go into “System Preferences” and then select either “Print & Scan” or "Print & Fax".
2. Right click (or control + click) on the rectangle listing your printers and then select “Reset Printing System”.
After you have reset the printing system, let's make sure you have the most recent HP driver package installed.
You can do this two ways. First, check for any available HP Update's by clicking the Apple icon and then Software Update. If there are any updates available, they should show up here. However, if the printer is connected by USB, it will not show any available updates. The other option is downloading the drivers from Apple's website.
You can download it here: http://support.apple.com/downloads/DL907/en_US/HPPrinterDrivers2.14.dmg
Once you have downloaded the driver package and completed the installation, you will want to plug your printer back in (if you were using a USB connection). After the printer is plugged back in, go into your print settings under System Preferences > Print & Scan. To add the printer, click the plus sign. You should see your printer listed here. If not, click "Add Printer or Scanner." Click the name of your printer and then click "Use:” box. Make sure that says the name of your printer and not AirPrint. If you are using the printer wirelessly, make sure that the printer "Kind:" is set to Bonjour or Bonjour Multifunction. Click "Add" down in the bottom right hand corner.
This will add your printer back using the most recent HP print driver available through Apple. Let me know if this helps resolve your issue or not. If it doesn't, let me know I will see what else I can do.
Best of luck,
Kyle

How to set up department ID printing on Canon IR Advanced C2020

We have a few Mac users (ranging from Leopard to Lion) that need to be able to print to our network printers. When I set them up to print to the Toshiba network printers I get the option of "Print Mode" in the printer options and then I can add their department ID so they can print. However on our Canon printers (IR Advanced C2020) that option doesn't exist and I can't send any print jobs through. I've downloaded and installed the UFR II v2.30 drivers and added the copier successfully. Is this option not available with this style of printer? Am I spinning my tires trying to get this to work?

The UFR2 driver does support Dept ID printing, providing you have the Mac's printing directly to the C2020. I have added some screen captures for the UFR2 driver to an iR C3380, the same applies to the new ADVANCE C2020.
If you have a document to print, let's say a PDF in Preview, and open the print dialog, you should have a Special Features menu as shown.
If you press the Printer Info button under the copiers picture, this will communicate with the copier and determine that Department ID Management is enabled, as shown. Note also the coins and calculater icon in the bottom left of the copier image.
OK this window which will return you to the Special Features above. But now you will have Job Accounting check box, which will be ticked.
If you press the Settings button, highlighted above with the red box, this will present a window where you can enter the department ID and password for this user, and also select whether you want the ID pop-up window when you print, so that you can change the ID/password if needed.
You are now ready to print to the C2020.

Single user is not able to print PDF files.

I have the following situation at our organisation for one of our users.
Printer:
Kyocera FS1030D
Kyocera KM-C3225
I have one user that is not able to print any PDF files in our network. (User Chris)
Printing a Word document or Notepad works fine.
To be specific:
The user is mainly using Windows 7 Pro 64 bits.
We also have a Citrix environment.
When this user is trying to print a PDF file we follow the following steps:
Open any PDF file.
Go to: File -> Print -> Select the printer to use.
Hit Print button.
Now the pop up comes up loading the PDF file to be printed. (The percentage bar)
After this bar disappears nothing happens.
The print que does not show on the bottom right hand of the screen.
If you open the printer que there is no document that needs to be printed.
We tested printing a PDF file on a different computer with user account Chris, but no success.
We tested printing a PDF file on the same computer with another user account, success.
We tested printing a PDF file in our Citrix environment (still on Chris his pc), success.
So as a wrap up: Printing with another user account works fine. The issue seems to be located in the user profile, but is not specific to a single computer.
We tested the following.
Print as Image setting.
Remove the print drivers and reinstalled them.
Renamed the Windows folders where the drivers are installed.
Removed Adobe Acrobat version 9 and installed version 10.
Any suggestions are welcome.

Hi Bill@VT,
Thanks for your reply. I have checked and the current installed version is 10.1.4. I tried updating but I get the message that the there are no new updates available.
Also I tried to find a 64 bits download but unfortunately I cannot find a 64 Bits install file.

AX not able to print; host is "busy"

I have a new Airport Express connected via Ethernet to a router. The AX is configured in bridge mode because the router is handling NAT etc.
I have a printer connected to the AX, I connect wirelessly to the AX and can see and set up the printer. However, when I try to print, I get a "host busy" error. If I delete the printer and try to set it up again, sometimes it doesn't show up.
Through the Airport Setup Assistant, I can see the Airport but can't read the configuration. A hard-reset will let me re-configure it and set up the printer, but I'm not able to print.
I tried to to update the firmware (currently 7.2.1) but it just spins endlessly trying to find the firmware.
Can anyone help?

Check under "Additional information" near the bottom here (the AirPrint knowledge base article):
HT4356

MAX settings do not stick

Hi - I'm trying to use FTDI drivers to simulate a COM port from an USB connection. Most WinXP SP2 or 3 machines have no problem, but I have one machine where having run MAX to ensure correct port operation, on quit and relaunch MAX shows a port conflict. This can be cleared with the available controls, but recurs the next time MAX is started. The settings do not stick. The subsystem (a TTi QL355TP power supply) does not see the communication either on this machine, and is OK on the others.
Environment: LV 8.2.1, MAX 4.1 or 4.2.1 . Would prefer not to upgrade LV to more recent version at this stage. LV 8.2.1 re-installed.
Any help or nudges much appreciated.

Thanks for reply. I can't obtain a screenshot at the moment, but the MAX display is a standard diagnostic I've seen on other occasions. Select a COM port in 'Configuration', and the "Port Settings' tab at the bottom has 'Conflict' added. The screen area above shows two columns of 'Settings', one from MS Windows, the other from MAX. These columns disagree in (for example) speed or flow control. Pressing 'Validate' aligns the two, 'conflict' disappears, 'Save' at top of screen appears to save correctly, and everything's fine. Except that the application this setting relies on still has a communication problem, and if you restart MAX the screen display resets to how I described above!
Re-install or repair of NI software does not fix it, nor does re-install of USB drivers. A corrupt data file on this machine would fit the observed evidence - are you able to point me to all the files that MAX may write? A corrupt MS Windows Registry entry might do it also, I guess. Do you know of any tools for checking or fixing such problems? The problem was triggered by a clumsy cleanup of installed NI software that was aborted partway through. The system is installed with a customer making a clean install of everything difficult and we are right at the point of having to write an unattractive workaround that uses a lower level serial interface to allow us to use NI Spy to eke out the required functionality.
Any help appreciated.

Adobe PDF Converter Advanced Options not sticking

I am having trouble getting decent quality pdfs printed from autocad - specifically of materials that are themselves pdf's placed into autocad. The information is typical pdf vectors - I can snap to the linework inside the documents, but when I actually plot them I am getting fuzzy rasters.
I am trying to fiddle with the setting in the plotter properties and nested a few menus in are some settings called Adobe PDF Converter Advanced Options - there I can change DPI, ICM intent and Posctrcipt options...the problem is the settings don't stick. I change something, and then go back in to the menus and they are exactly as I first found them.
there are two problems here - one, printing pdfs of pdfs not producing very good quality, and two, having trouble getting settings to stay set...

I pretty much agree. However, print quality can be a big one. I use 300 dpi and many folks recommend 600 dpi. The 1200 dpi is way beyond what is normally needed. One place where the 1200 is a major problem is in preparation of slides in PDF. If you have line drawing with color lines of 1 pixel, they will be 1200 dpi. Imagine the problems when displaying on a 96 dpi monitor, a factor of more than 12 fewer pixels. A 1 pixel yellow line is almost unreadable because of the way that the line is sampled for display. If 300 dpi is used for print quality, then there is no problem. I found this one out the hard way.
Most of the other settings you would leave alone, or change someplace else.
In your sample DOC file from another post, your A4 came out as letter for me. The paper set in the DOC file is A4. My default in Acrobat is letter. Thus, WORD does NOT override the printer setting. You have to set the paper in the printer separately, similar to putting the proper paper in the printer.
I am still struggling with all the differences you are trying to point out on your other post. There are differences, but I am not totally sure of the reason. You might want to look at a page audit under the PDF optimize to see were teh resources are being used.

PSE 9 Preferences:Saving Files will not stick

MacOSX 10.6, Photoshop Elements 9 - I have tried (lots of times) to set the Append File Extension: preference to Always and to check Use Lower Case. It will not stick. The next time I go into Preferences it is back to Never and the check box is unchecked. My other preference changes all seem to be saved correctly. Why does this one not save?

Let me start this with....in OS 9.2.2 I am able to delete files that are not needed from the system folder. For some odd reason when I try this in 10.3.9 it murders my system...needless to say I have printer extensions, scanner estensions,modem stuff and other not needed things living in there.
Recently I did nothing like that but also had to forcequit a program to only find that everything I opened ...might open once then it would tell me that there was an error---spit the number out---and the program would not open.
I had to do an install/archive then update to 10.3.9 again in order to gain the use of my computer and programs.
You may need to do the same thing...it is llike the cleam install of OS 9, where it replaces the system folder and stores your things into a "safe folder" to return when done. Some items may need to be manually moved and lke my printer/scanner, it needed to be reinstalled.
Insert the install cd and boot to it. Use the disk utility to repair the hd (go under the file menu I think), then choose the install and archive option (click the option button to find it). See if that helps.
Edited by MaryW cause she can't type...LOL

"Bottom" Setting not sticking in print calibration

Similar Messages

Maybe you are looking for