Bought MacAir 2 weeks ago. Loaded Parallels; Windows 7 Pro; Office 10. Created a ss but defaults to Office 11 making it impossible to save on an external drive, but worst is my external drive now asks to be formatted (losing all my personal files)

As stated above. So despite attempting to run a parallel windows system it seems like everything's defaulted to Apple. I've tried uninstalling Office 2011 (trash), but then I can't use save an Office 2010 file without it. So, I have to reverse that. Not sure whether I should uninstall the whole lot and try again.
But I have an even worse problem: My external hard drive (Samsung) will not now work and it contains all my personal and work files, but more importantly all my tax files that I need as a Brit expat. It now asks me to format the drive on the Mac or my work PC. Presumably this will mean I lose all my data.
I'm totally underwhelmed and now wished I had never bought the computer because it will cause me huge problems if I have lost my data.

Step 6: Here is where I need help/advice – can I remove the Bootcamp partition on my internal drive now?
To answer my own question in Step 6 above, no, or at least I haven't found a way yet...
Here's what I've done so far:
Used the Bootcamp Assistant to remove the bootcamp partition on my internal drive.
Booted the system with the option (alt) key pressed down and now there was NO Windows drive to choose.
Therefore I used the Bootcamp Assistant to install Windows back onto my internal drive (including installing Bootcamp drivers in the Windows environment). This time I chose the minimum partition of 20GB for the Windows installation on the internal drive.
Booted into the new Windows on the internal drive and installed the drivers for my Thunderbolt drive.
Restarted with the option (alt) key pressed down, chose the Windows drive, but Windows Boot Manager still didn't pop up to allow me to choose the Windows installation on the external Thunderbolt drive.
Booted from the Windows DVD and chose Repair.
Restarted with the option (alt) key pressed down, chose the Windows drive, and now Windows Boot Manager finally popped up, which allowed me to choose the Windows installation on the external Thunderbolt drive again, phew!
So, I can run Windows 7 from the external Thunderbolt drive, but I have to use 20GB of my internal drive for a Windows installation I'll never use. Not the best solution, but at least I've saved 30GB of space compared to my previous Bootcamp partition - and I now have enough space to install the Windows 7 software I need on the external Thunderbolt drive...

Similar Messages

  • Hi. My iPad has pb with his own light. Like all the lights for the screen don t work... You have like shadow on one edge. I bought two weeks ago! Thanks for answering

    Hi. My iPad has pb with his own light. Like all the lights for the screen don t work... You have like shadow on one edge. I bought two weeks ago! Thanks for answering

    Make an appointment with the Genius Bar at your Apple Store.  If they determine there is an issue with your iPad, it will be replaced.

  • Was trying to update to latest version; i uninstall to download new version because it wasn't letting me update. Now it wouldn't open at all because "The file"iTunes.Library.itl"cannot be read because it was created by a newer version of iTunes".:( ?

    I Was trying to update to the latest version; i uninstall to download new version because it wasn't letting me update. Now it wouldn't open at all because "The file"iTunes.Library.itl"cannot be read because it was created by a newer version of iTunes".:(  How do i go back to last install or make this new version works?

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • My computer crashed losing all my music files.all my music is stored on my i phone and i pod how do i get my music back on my computer from my devices?

    My computer crashed losing all my music files there stored on my i phone and ipod how do i get them back on my computer?

    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • HP Officejet Pro 8610 bought 2 weeks ago. giving vertical lines while printing.

    Dear Sir,
    I bought new officejet pro8610 . 2 weeks ago. its giving vertical lines on printing any document from printer. scanner is absolutely fine just problem while printing and copying. i clear printhead few times. 
    i just check that when i am printing any paper from windows photo viewer,there are lines like this.
    but when i copy the same image in Ms Word 2007 and print it from there. the paper is clean without lines. its strange. while i have anyother printer HP Laserjet Color CP1025 attached with same computer . i print the same image from CP1025 from Windows Photo viewer, its clean from there without lines. can any one help me out from this issue

    Dear Sir,
    I bought new officejet pro8610 . 2 weeks ago. its giving vertical lines on printing any document from printer. scanner is absolutely fine just problem while printing and copying. i clear printhead few times. 
    i just check that when i am printing any paper from windows photo viewer,there are lines like this.
    but when i copy the same image in Ms Word 2007 and print it from there. the paper is clean without lines. its strange. while i have anyother printer HP Laserjet Color CP1025 attached with same computer . i print the same image from CP1025 from Windows Photo viewer, its clean from there without lines. can any one help me out from this issue

  • HT1766 I have bought an Iphone 5s weeks ago. Although I am very happy with the devcie, I must say the restoring process and accessing my music in itunes is driving me nuts. I have bought it weeks ago, since then the phone has been in constant restoring. H

    I am very frustrated. I decided to cancel the restoring process and I can't still access my music because is loading iTunes Match.... this has been going on now for weeks, where i ahve turned off the data mobile and stick to wifi.... Nothing seems to work. Any help mroe than appreciate it.

    Hi
    You should ask your relative to physically take the iPhone to the store rather than shipping it because as diesel vdub has said:
    "No Apple store will accept an iPhone shipped to them"
    All you have to do is safely pack and ship your iPhone from the Philppines to your California-based relative.
    HTH?
    Tony

  • Hi. I was given an iPod with hundreds of songs.  Now I have created my own iTunes account on my computer.  Is there any way of adding my iTunes to my existing iPad (someone else's iTunes account) without losing all of the songs already on my iPod?

    Hi there.  I was given an iPod loaded with hundreds of songs.  I have created an iTunes account on my computer. Is it possible to add the songs from my own iTunes account onto my iPod, which was created by someone else using their iTunes account, without losing all the songs on my iPod.  Probably a stupid question, but I am one of the "older" generation .... Thanks

    The The person who gave yo the iPod did not have the right/licence to also give you the media on the iPod. If you use it yo are stealing.
    Go to Settings>General>Reset>Erase all Content end Settings and set the iPod up with your media.

  • I have iPhone 4S 32g Sprint,already cancelled a week ago.My question is,can I use at-t or t-mobile for a cheaper plan.any suggestion would do appreciated,by the way my phone has micro sd card.Have a nice evening to all the apple user's

    I have iPhone 4S 32g Sprint,already cancelled week ago....My Question is if I can use any carrier like at-t or T-mobile for a cheaper plan....By the way my phone has a micro sd,any suggestions would appreciated,have a nice evening to all the apple user's & thank's....

    I strongly recommend against switching to tmobile. They seem cheaper up front, but their "unlimited" data cuts you off at a certain point. They will even send you messages saying that you "went over your limit." Not only that but they sneak in fees, charges, and services that were never agreed upon making your bill more expensive. And forget ever trying to change your contract. They'll change it for you, but what they don't tell you is that they are roping you into another 2 year contract from that point on. No paperwork, no signatures, no nothing. They just screw you.
    But other than that, yes you can unlock your iphone and use it with them. Though I wouldn't if I were you.

  • Mac Air new-bought one week ago- doesn't recognize my IPhone 4 even after the upgrade to IOS 7!!

    Hi everyone, I bought a Mac Air 11" one week ago, so it's super new. When I connect my IPhone 4, now updated to IOS 7, it doesn't recognize it, it doen't charge it and the vibration goes like crazy! Sometimes it appears that there's the lock that forbids it, but I've always used it and I never had problems.. also cause the Ipad is locked as well and there are no problems!
    Has anyone had the same problem??
    thanks!

    chiarafromtv wrote:
    You mean like the information on Itunes? That's 11.1 (126) 164 bit..
    Yes. Thank you.
    chiarafromtv wrote:
    . the Mac has USB3, the IPhone, that's a 4, has the USB2.. could it be the problem?
    No. USB 3 is Backwards compatible with USB 2 and even USB 1...
    chiarafromtv wrote:
    When I connect my IPhone 4, now updated to IOS 7, it doesn't recognize it, it doen't charge it and the vibration goes like crazy!
    More than likely an issue with your phone.
    Perhaps a Visit to an Apple Store or  AASP (Authorized Apple Service Provider) is required.
    The fact that the vibration goes like crazy  is suggestive of an issue.

  • Dear all, Since a week ago I observe that when I press the button for my macbook air to start a nap, first the screen turns to black but I can see the arrow (pointer). And only after few seconds the arrow and the screen really shut down.

    Dear all, Since a week ago I observe that when I press the button for my macbook air to start a nap, first the screen turns to black (although I can see it is stil on) and I can see the arrow (pointer). Only after 15 seconds the arrow and the screen really shut down. It did not occur before, as a matter of fact it was instantaneous. What could be the problem?

    Note the time in your Mac's menu bar or some other accurate timepiece. Then, press the button to put the MBA to sleep. Wait until the cursor disappears and for all indications that the Mac appears to be asleep.
    Then, wake the Mac the way you normally wake it.
    Then, find the Console app - it is in your Utilities folder and looks like this
    You can find it by selecting Utilities from the Finder's Go menu.
    Open Console.
    If the log list column on the left is not already displayed, show the log list by selecting Show Log List from Console's View menu.
    Locate system.log in the list and select it. Many date and time-stamped entries will appear, hundreds of them, and you must find the entries relevant to your Mac's sleep problem. To do that type the words sleep cause in the Filter field at the upper left of the Console window:
    That will cause all log entries to be hidden, except for the entries containing those words. The last entry in the list will correspond to the last time you woke the Mac. It will have a time stamp in the form hh:mm:ss later than the time you noted in the Mac's menu bar prior to putting it to sleep.
    Make note of that exact time in hours, minutes, and seconds.
    Next: Clear the filter field by clicking the x in the above screenshot. It should then look like this:
    All previously displayed log entries will reappear.
    Next: Find the log entry that corresponds exactly to the time you noted in hours, minutes, and seconds containing the words "previous sleep cause". You may have to scroll up or down a considerable distance. When you find that line, select it and drag your cursor up and prior to the entry corresponding to the approximate time you noted before putting the Mac to sleep. This will result in a selection of perhaps 50 to 100 lines or so.
    One or more of them, along with their time stamps, may reveal the reason for the fifteen second delay.
    Copy and paste those log entries in a reply.
    Most of the entries will be cryptic but will contain information you might consider personal such as your Mac's name. If you do not want that information to appear, delete or obscure it when posting your reply. Leave enough information so that the entries can be deciphered.

  • HT201441 I bought an iphone 4*at*t from a craigslist ad. The seller did not restore the phone and when I tried to do it manually it locked the phone and is now asking for the login info. I contacted the seller and he is not responding. What do i do?

    The seller did not restore the phone and when I tried to do it manually it locked the phone and is now asking for the login info in order to do anything with the phone. I contacted the seller and he is not responding. What do i do?

    he knows his ID , if he did all whats in the link he can get his password back ?
    how can i make him call applecare ? is there a way to speak to them from jordan ??
    i have been trying to reach any1 in apple so they can communicate and help my friend (us) to make him remember it .
    am not asking for the password or trying to get into the phone without using it , and i can take my money back though i need to help my friend as well since now he cant use it as well.
    thanks kil

  • HP printer stopped printing wirelessly, available driver from apple will not download. Now What? No printer at all!

    HP 6500A Plus wireless printer quit printing wirelessly but still printed wired. The printer connects to the wireless router (linksys EA6100),  I am running OS X Lion. Decided to see if needed updated software for printer. Went to HP website and downloaded full version driver for this printer/fax/scanner. I set up the printer for wireless printing, it connected to wireless network, but the macbook does not find the printer on the network. Discovered that if I setup wireless connection again from printer touchscreen and re-added printer to the printer list on my macbook pro, then I could print one document. To print again I had to go through that process again. Have downloaded and installed this driver several times now over course of a week.
    Today I decided to download just printer driver. Went to HP website, driver is available and HP actually has you use the apple software update to pull this one. Apple Software Update says software is available for this printer, I also confirmed that on a list of available software on apple website, but while it is downloading it stops and gives me a message that software is not available. Now I can not even print wired. I have tried process several times. What do I do now?  I have a scanner and fax, but no printer!!

    I am sorry for the delay in answering.  TWC email sometimes takes several days to get to me.
    I am embarrassed to say that I did not read closely the message that was provided when I clicked on Control Clicked / Open.  I did go back and continue the process and thought I had installed the update.  The end message stated that the installation was successful, but I could not find the scanner anywhere, even with intense searching.  I have reinstalled it twice again with no scanner installed.  I did find files in the Saved Application State but they take only a few KBs of space and the software should have taken 22.4 MBs.
    I have messages now posted in two different HP Communities and will continue to try that route to help, but right now it looks dismal.  If you have any more explanations or advice I would love hearing from you.  Could the Trovi component cause this problem?  I thought I was rid of it but I don't really know what to look for other than not having it take over my home page - which it has not done recently.
    I really appreciate your help, and I take your advice to heart about not using the older CD and I will not attempt to revert to Snow Leopard.  I am really afraid it would mess up iPhoto  and that would be devastating. 

  • Itunes store account for an iphone my friend created an account also in the same computer for an ipod and now it the ipod keeps getting all my personal data from my iphone how can i that  both devices sync in the pc

    hi , can any one help me with a problem ,,, i own an iphone 4 and creates my account in itunes months later my friend bought an ipod and created an account also but created in my pc and  now both get sync in the same pc and all my personal data from the iphone 4 keeps getting copy and the ipod gets it and have acces to my personal data and apps gets my mail etc , can any one help me with this issue?
    thnk you

    Sorry to hear of your problem, but any hardware in a computer can fail - that includes the hard drive, the logic board, etc, etc. Fortunately, it usually doesn't happen that soon; however, I've read of hard drives failing within 6 months.
    So, since you did not purchase the extended Applecare Protection Plan (3 years coverage), you will need to make a decision to repair or sell it as is. I would always purchase 3 year coverage for an all in one or a laptop because repairs are expensive and at least I'd be covered for 3 years.
    We can't speculate on whether there should be a recall or not; these forums are for user to user assistance with technical problems. In your case, there is nothing we can help with since you've already gotten a diagnosis.

  • The battery of my iPhone, which I just bought two weeks ago, seems to be too short.

    I just bought this iPhone about two weeks in Regant Street apple store in London. At the beginning, I didn't pay too much attention to the battery time. However, I found there seems to be some problems about the battery time. Especially, I compared my iPhone with my friend's. I realized that my iPhone battery time is too much shorter than that of my friend's.
    So I come here to ask for some help to see whether there are some way or software to check my battery is normal or not?
    I studying in Oxford in which there is not an apple retail store, and I am preparing for the exam. After the exam, I gotta go back to China for the summer vocation at the end of May. So I may not have too much time. How long will it take if the iPhone need to be fixed?
    Can I enjoyed the customer service in China? If that possible can I change a new iPhone or not?

    " How long will it take if the iPhone need to be fixed?"
    If the iphone is defective then they will swap it out on the spot.
    "Can I enjoyed the customer service in China?"
    Probably not.

  • Lightroom 5,7 bought 4 weeks ago - now update free of charge ?

    Dear all ... have bought LR 5.7 via Amazon , March 18 and heard about a new version ... my question where I can get the update free of charge ... thanks Stephan

    Try Do I qualify for a free upgrade?

Maybe you are looking for

  • Safari 6.0.3 crashes on open in 10.7.5 (upgraded from 10.6.8)

    Folks, I'm heading to the genius bar, but failing that they find a solution I'm posting this here as well. I recently updated my 10.6.8 system to 10.7.5 via a standard USB upgrade stick from Apple. The update seemed successful... until I attempted to

  • BLOB used to store image in 9i is causing problem

    Hi all, I have an application developed in Oracle Developer 6i. One of the forms captures the snaps of the applicants, the datatype being used BLOB. It works fine with Oracle 8i (8.1.5).When tested with Oracle 9i (release 2), the same form gives mess

  • Getting a request value in JSF

    Hi all if I have a request parameter that I'd normally get like request.getParameter("myform.firstname"); how do you do this with getValue()?

  • Samsung SE-506 no longer functions after Yosemite update

    I have a late 2013 MBP, was using Toast Titanium 11 for covering iMovie projects to burn onto Blu rays, with a Samsung SE-506.  For the majority, had no issues, and successfully completed several projects - both to BR and DVD.  After updating OS to Y

  • " couldn't scan for wireless networks ".. No WiFi :(

    Hello .. I have an Iphone 4S and it was connecting to wifi normally .. but lately it's not .. whenever i try to search for networks .. i get nothing .. even if i tried  to enter the network name I get a message " couldn't scan for wireless networks "