Bounce Message processing question

When a message from our Notes mail server gets sent to the Ironport for outbound delivery, and the recipient email address is incorrect, does the delivery failures message generated by the Ironport to our Notes user bypass outbound content filters and outbound mail policies or will it be processed by them?
Ironport C160, AsyncOS 7.1.5-017
Thanks,

Thanks for the response. I thought that might be the case, but couldn't find any verification.
Ken

Similar Messages

Small question on message processing

What is numberRetries,retryInterval,persistDuration and timeout during message processing.What are the default values.

Hi,
PFB details:
xiadapter.inbound.numberRetries.default --> Default: 3
xiadapter.inbound.retryInterval.default --> Default: 300000
xiadapter.inbound.persistDuration.default --> Default: 2592000000
xiadapter.inbound.timeout.default --> Default: 180000
Refer:
Properties for Service SAP XI Adapter: XI - Configuration of Usage Type Process Integration (PI) - SAP Library
Regards,
Azhar

Bounce messages not delivered in users mailbox

When a Undelivered Mail message arrives in our Groupwise system it disappears somewhere in the dark, and is not delivered to the user.
The only thing we notice is that the "From" field is empty but all other fields are filled with correct data.
Answer from our ISP :
"E-mail that is being bounced back should have an empty (null) return
address so that bounces are never created for a bounce and therefore you
can't get messages bouncing back and forth forever."
Non delivery report - Wikipedia, the free encyclopedia
Bounce Address Tag Validation - Wikipedia, the free encyclopedia
Are we missing a setting somewhere ??
Jan Hoetink
Isendoorn College
Warnsveld
The Netherlands

In article <[email protected]>, Janhoetink
wrote:
> When a Undelivered Mail message arrives
>
normally that is done during the SMTP connection, where the sending
server is told with an SMTP 'error' that the user doesn't exist.
That you are receiving a separate message indicates that some SMTP
routing/relaying is going on.
Perhaps a bit about your environment would be useful.
- Does GWIA talk directly out or is it pointed to a relay?
- Version of GWIA and the OS it is running on.
- Where are you catching the message that gave you the detail you
described?
> It disappears somewhere in the dark, and is not delivered to the
> user.
Very likely just updates the status of the sent item. At least that is
where I would expect it to have been processed and seen in the
properties of the sent message in question.
Andy Konecny
KonecnyConsulting.ca in Toronto
Andy's Profile: http://forums.novell.com/member.php?userid=75037

Message processing failed if we receive attachments via E-Mail

Dear ladies and gentlemen,
we have follow proccess:
We get some e-mails with an attachment. The E-Mail pick up the messages and send it to an RFC Channel.
I changed the payload via the localejbs/AF_Modules/PayloadSwapBean :
localejbs/AF_Modules/PayloadSwapBean Local Enterprise Bean TRANSFORM
and the module configuration looks follow:
TRANSFORM swap.keyName payload-name
TRANSOFRM swap.keyValue MailAttachment-1
it looks good and the payload would be swapped okay, and the mapping is also okay.
But if we push the message to the RFC Adapter I get follow error message back:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
So now my question: If is possible, that the adapter try to send also the Body of this E-Mail to the target system ? Because the
Message ID is the ID from the payload of the E-Mail Body.
It is possible to keep away the E-Mail Body from the payload?
Because we need only the attachment. Or if I I have to setup via Bean anything in the RFC Adapter ?
Thanks
Kind reagards
Stephan Kohler
P.S. The PI System is an PI 7.1, the target system would be an R/3 4.6. I haven't any success with the RFC Adatper version 7.10 or 6.40

> Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
>
Is your attachment an XML? Is this XML structure is same as what you mapping source is? If that is the case, it should be okay. Is this interface working for non-mail sender? You might want to re-import the RFC structure in to PI again.
VJ

"up and running no message processing until now"

Hi,
I am doing a multiline scenario with File Content Conversion. In Adapter Monitor, Message is processed in the sender CC and in the Receiver CC it shows "up and running no message processing until now"
Whats mean by this ?. What is the status of my message ? Where I can monitor the message send from sender communication to the Receiver communication channel (If not in SXMB_MONI ?)
Thanks,
Ram

hi,
check adapter message monitor:
http://hostname:portnumber/MessagingSystem/monitor/monitor.jsp
you should see all message over there
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

RUN OPERATING SYSTEM COMMAND BEFORE MESSAGE PROCESSING

hi.
just i want to know what is the purpose of run operating system command before message processing,after message processing under file sender adapter.
waiting for your great answer.
bye.
regards.
seeta ram.

Hello Seeta,
let me see if I give it using a simple scenario that I implamented : i nedd to transfer a very large file from one server to the other by XI.
to save space and network traffic I use an OS command before picking up the file to run a zip command to zip the file.
after I transfer the file to the target server I run another OS command after the transfer to unzip the file.
now to your second question:
the before Os command on the target server is used mostly for checks (make sure there isn't a file by that name or backing up existing data)
and the after sender OS command is usualy for backing up or erasing existing files (cause it is done only after the first part was finished succesfully).
Uri Lifshitz.
p.s.
there was a blog obout this titled "XI as a huge file mover"
and you can see a description and my scripts at https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/03/additionaltipsforusingXIasahugefiletransfer%28withbatchscripts%29&

Message split questions

Hi Guys!
First I need a confirmation for following assumption:
To create multiple messages of same type (without BPM) I set the inbound interface to 0..unbounded in the if-mapping and I also set the target message to 0..unbounded in the message mapping. If I want to create one message per let's say "ITEM", I map ITEM to the root node of the target message and there will be one message per ITEM. Is that right?
Then I have a question concerning the processing order:
Are the messages processed in the order they appear in the message mapping?
Last question:
Does the message split within the if-/ message mapping also work with synchronous processes and with jdbc adapter?
Thanks in advance!
Karsten

Karsten:
In anwsering your first question, it is 1:N multi-mapping scenario, noticed that your target message is just single type.
1. In your message mapping, go to "message" tab, change your target message to 0:unbounded
2. In you Interface mapping, change to inbound interface to 0:unbounded, mapping program need to be specify your message mapping
3. In your message mapping, you want each 'ITEM" in your source message to generate each target message:
you need to map: ITEM ---> Target_Message_Type.
Hope this answer your first question as well.
Liang

Create .txt empty file After Message Processing Command Line Linux command

Hi All,
An empty .txt file has to be created in FTP location(FTP loc c:\xyz\Customer20082910.txt) only after the .dat file has been created(FTP loc c:\xyz\Customer20082910.dat)
Note:.dat has the actual data and .txt is an empty file and is created only after .dat is created
I know that .txt empty file can be created using the After Message Processing Command Line...
But confused which command to be given such that it will be created in the FTP location(c:\xyz\Customer20082910.txt)
Can any one please give the Linux command for it...
Regards,
Sridhar

Hi Aamir,
Thanks for the suggestion, I will ask my client to create a shell script at FTP server...
And one more question,
This is reverse side , now the .dat file is to be picked only if .txt exists at the FTP server (scenario File > XI>SAP) (earlier was SAP>XI>File)..
So please can you suggest for this also...
How can i check for the .txt and pick corresponding .dat file...
i had posted question long back
Need to pick .TXT file only if .CTL file is available
Regards,
Sridhar

No Message processing Untill now

Hello All,
I have done new server installation and doing File to File Scenario .while doing this scenario file was picked but my error is "no message are available in the SXI_MONI".I checked Adapter Monitoring Source Communaction channal was green status and Up and running: Last message processing started reciver communaction channel also green status but Up and running - no message processing until now.finely i did not get out file in the reciver adapater.so pls gudie me .
regards,

Hi Venkatesham Neela
You have all the rights to post your question in a separate Thread and that will help everyone including yourself. You encorached in to my thread and now I couldnot send the Points to Michal karkawickz.
Thanks Michal for your help.

How to change bounce message for spam tagged email?

Hello,
I'm checking outgoing email messages for spam. I will send bounce to email sender (user from my domain) if message is tagged as positive or suspected spam. ok, I can set it, but how can I change text in bounce message?
default bounce if mail is tagged as spam is:
Your message did not reach some or all of the intended recipients.
Subject: FW: something
Sent: 7/12/2009 8:33 PM
The following recipient(s) could not be reached:
[email protected] on 7/12/2009 8:35 PM
The e-mail system was unable to deliver the message, but did not report a specific reason. Check the address and try again. If it still fails, contact your system administrator.
<smtp.domain.com #5.0.0 smtp; 5.x.0 - Message bounced by administrator (delivery attempts: 0)>
^^ but there is no information for the sender that message is not possible deliver, because is tagged as spam.
Is it possible to change this default message?
(AsyncOS: v6.5.2-101)
martin

You are correct that it doesn't appear that the Positive Spam or Suspect Spam setting doesn't appear to give you any leeway on using a different bounce profile/message to whomever you bounce it back to.
You may want to consider this workaround.
1. In the Action, change it to "Deliver"
2. In the Advanced section of both the Positive and Suspect spam, there is a section labeled "Add Custom Header". Add a custom header like the following:
X-Internal-Spam-Message: true
3. Then, since this message will still go through the outgoing content filters, you can create an outgoing content filter that looks for the "X-Internal-Spam-Message" header. If that header exist, then the outgoing content filter will match. For the action, you may need to use the "notify()" action and notify the original sender that it could not get delivered since it was detected to be spam. There is an option to attach the original message. The reason you need to use the notify() instead of the bounce() is because bounce doesn't currently have the option to specify which bounce profile to use.
You can only specify a different bounce profile in the "Mail Policies > Destination Controls".
Let me know if you have any question.

Mail on success or error in message processing

Hi experts
I need to configure a scenario
1. Receive idoc from an SAP system
2. Convert the Idoc into File and Place it in the NFS File directory.
3. On success of the message, I need to mail to SAP Owner regarding the success of the message.
4. On error as well , i need the error details to the SAP Owner.
I had configued all the basic steps in IR. I had struck with the BPM part.
Please suggest with the steps in the BPM.
Thnz

hi Mohamed,
For sending the mail on success or error in message processing you need to go to the runtime workbench and configure the scenario for mail alerts.
You need to create the alert rules for the success scenario and the failure scenario.
While creating the rules you can specify the message id's to which the mail should be sent.
Please refer to the below link for more clarification.
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Kindly search SDN also as there are several threads in the forum answering the same question.
Regards,
Alpa.

Stateful message processing for async scenario

Dear all,
my async scenarios:
1. RFC -> PI -> File
2. File -> PI -> RFC
Following facts:
- The second message is a response to the first one. Both message are separted and async.
- Scenario 2 can be send some hours after Scenario1.
- A response should only be send if a specified field in the message of first scenario is filled.
For example: Message in scenario has a field <ResponseNeeded>YES</ResponseNeeded>
This field does only exist in message of scenario 1.
- Both message have an ID field (e.g. <ID>4711</ID>) which can be used to identified the
corresponding message.
Questions:
- Is it possible to use stateful message processing for this scenario? Or do I need BMP + Correlation?
- A service interface with pattern "stateful" can only be used synchronously. So is it
possible to use this stateful for async message processing at least?
I would assume that I will need a BPM that sends the messsage and keep alive until a
response will be sends with same ID. After this I would check message of scenario1 and
send (or even not) the message of scenario2 to receiver depending on <ResponseNeeded>.
Thanks in advanced.
Chris

Hi Chris,
Although BPM is possible here, I would not recommend you to use one here for the reason,
>>Scenario 2 can be send some hours after Scenario1.
This means you are keeping a process alive for so long which is not a good thing to do.
You could end up with a lot of open/live process instances.
Having said that, if you still wish to go ahead with BPM, the steps would be
1. Receive async (RFC req) - start process, correlation based on ID.
2. Switch step (Evaluate ResponseNeeded)
branch 1(True): a. Send asynch step - File
b. Receive async - File correlation - ID.
c. Send async - RFC call.
branch 2(false) a. Send async -File
3. Stop process.
Regards
Jai

Message Aggregator Question

I have an instance where I need 2 sender file adapters to send XI 2 different files (layouts are different). XI then needs to combine and map the messages from these two files into a single IDoc for each combined message. I know in a multi-mapping I can do it either with a BPM or without. When "aggregating" messages I know I can do it with a BPM. My question is does anyone know of a blog that exists where someone has accomplished this without the need of a BPM (and if there are any good blogs which cover how to aggregate with a BPM that would be helpful as well).
Thanks!

Shaun,
As you can see here, [Multi-Mappings|http://help.sap.com/saphelp_nw70/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/content.htm], you can not do the Message-Merge (n:1) mapping w/o BPM.
Using the BPM, you can refer to the pattern
BpmPatternCollectMultiIf - [Collecting and Bundling Messages - Multiple Interfaces|http://help.sap.com/saphelp_nw70/helpdata/en/0e/56373f7853494fe10000000a114084/content.htm]
I suggest that you schedule your sender adapters at around same time..so that the BPM doesn't have to wait too long to process them. If you can not ensure that, then you can use [Event-Driven Message Processing|http://help.sap.com/saphelp_nw70/helpdata/en/7a/00143f011f4b2ee10000000a114084/content.htm] to wait for both the files to be picked up before they are sent to BPM.
praveen

How to Run Operating System Command Before/After Message Processing SAP PI

Hi,
We are trying to execute multiple commands via "Operating System Command Before/After Message Processing".
When we use single command say for example cp or mv (copy or move) the commands get executed fine.
eg: cp %F /var/opt/data/outbound/Test/Dummy.txt
/this works fine/
when we club commands together or try to redirect the outputs of commands, none of the commands get executed.
eg:
cp %F /var/opt/data/outbound/Test/Dummy.txt ; rm %F
or
wc -l %F > /var/opt/data/outbound/Test/Dummy.txt
Is it possible to execute multiple commands or redirect the output of commands without using a shell script? The PI server we are working on iis hosted on UNIX environment.

Hi Harleen,
try like this
cp %F /var/opt/data/outbound/Test/Dummy.txt ; rm %F
instead of semicolon try this
(1) &
command1 & command2
Execute Command1 and then execute Command2
(2) &&
command1 && command2
Runs the command2 only when command1 doesn't Complete successfully
(3) ||
command1 || command2
Runs the second command if the first command had an error
(4) ()
(command1 || command2) || (command3 & command4)
Defines the order in which commands are to be executed
Regards
Suraj

Getting Err : An error occurred in the message processing program.

Hi, Im wrking with Smartforms.
I have assigned output type LD00 ,with driver prgrm name and Smf name.
after that executing with VL03N , its giving error .
Output could not be issued
Message no. VL086
Diagnosis
An error occurred in the message processing program.
Procedure
Contact your system administrator.
...Actually i have orginal prgrm (zsmf_Orginal) there i had to do some modifications , so after copying that same form into another form(zsmf_Duplicate), i made some changes there, both form are executing in T code SMARTFORMS, but while testing with VL03N , its showing above mentioned err.
Plz have eye on it.
<removed by moderator>
Regards
vivek.
Edited by: vivekd358 on Jul 10, 2010 7:35 AM
Edited by: Thomas Zloch on Jul 12, 2010 11:35 AM

closed

Bounce Message processing question

Similar Messages

Maybe you are looking for