BP created with category Person and BP Role Consumer is not replicated

Hello Gurus,
I have created a BP with Category Person and BP Role Consumer but after saving my BP is not getting
replicated to ERP, though in the Clasification Tab i could see consumer is being selected and the Account
group 0170 - Consumer showing up. 
I have also checked in PIDE transaction in ERP system this Account group has clasification E which is Consumer.person,and as numbe range is assigned to this Account group 
i have checked in middleware there is an error message which says "BP XXXX doesnt not exist as customer,change not possible" and aslo one more message which says "no classification is assigned to BP"
any customizing is missing in CRM system, or only customiaing required is in ERP only?
Thanks and Regards
chandu

Hi,
With respect to your question on below link.
Re: BP created with category Person and BP Role Consumer is not replicated
Please find the below path in ECC
SPRO>Logistic General>Business Partner>Customer>Define Account Groups and Field Selection for Customers.
Select 0170 Consumer account grp and click on details. You will see the Number range in General Data.
Copy that number range and goto below path and check if the number range is internal or external.
SPRO>Logistic General>Business Partner>Customer>Define and Assign Customer Number ranges. The popup will appear and select Define Number ranges for customer master. Click on display intervals. You will see the number range is mainatined internal or external.
Hope this helps.
Regards,
Chandrakant
Edited by: Chandrakant A on Dec 15, 2009 7:41 PM

Similar Messages

  • BAPI "BAPI_POSRVAPS_GETLIST2" not extracting Orders with category BC and BD

    Hi,
    I am using a BAPI  "BAPI_POSRVAPS_GETLIST2"  to extract the receipts and requirement elements from live cache, however I found that this BAPI does not extract orders with category BC and BD (Stock transfer reservation).
    Can you kindly let me know whether this is correct ? BC and BD does not fall in receipt or requirement category ?
    If yes then which BAPI should I use to extract orders with BC and BD category ?
    Thanks & Regards,
    Rohit

    Hi Rohit,
      The categories BC & BD are coming under reciepts & requirements only and i guess should be retrived by standard BAPI.
    Please try using BAPI BAPI_POSRVAPS_GETLIST3.
    and also mention correct 'locationproducts' as mentioned in the below thread.
    Purchase order data for ATP category BH and BI not retrieved
    Initially plese try to retrieve the details by 'Order number' to make sure the BAPI is working fine. Later you can do it by locproducts and ATP category.
    Hope it helps.
    Regards,
    Deepthi

  • I dropped the phone, but not light ! I tried to start it with the restoration and upgrading but I do not , what can I do

    I dropped the phone, but not light ! I tried to start it with the restoration and upgrading but I do not , what can I do ?

    If you dropped the device and cannot get it to start up, then you have probably damaged it to the point it needs to be looked at by Apple or your Authorized Apple Service Provider, whomever handles service in your location. User damage is not covered under warranty, so be prepared to pay.

  • I have a problem with my bluetooth and Wi-Fi, it seems not to connect and just keep searching

    i have a problem with my bluetooth and Wi-Fi, it seems not to connect and just keep searching

    Hello there, charles.
    The following Knowledge Base article offers up some great information and links in regards to things that can interfere with both Bluetooth and Wi-Fi:
    Wi-Fi and Bluetooth: Potential sources of wireless interference
    http://support.apple.com/kb/ht1365
    Additionally the following articles offer specific steps for each:
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    and
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I have a macbook pro with mountain lion and now so I can not synchronize my outlook calendar office 2011 for mac with ical and, therefore, with icloude. Can anyone help?

    I have a macbook pro with mountain lion and now so I can not synchronize my outlook calendar office 2011 for mac with ical and, therefore, with icloude. Can anyone help?

    http://support.apple.com/kb/HT5922
    If you want to mirror your desktop, see:
    http://support.apple.com/kb/HT5404
    Regards.

  • Macbook 13.3 with new battery and new magsafe adaptor will not charge above 80% no indicator light on charger display states "not charging" while attached to charger

    macbook 13.3 with new battery and new magsafe adaptor will not charge above 80% no indicator light on charger, display states "not charging" while attached to charger

    rgregoryadams wrote:
    macbook 13.3 with new battery and new magsafe adaptor will not charge above 80% no indicator light on charger, display states "not charging" while attached to charger
    You'll want to reset your SMC (System Management Controller). Instructions are simple:
    http://support.apple.com/kb/ht3964

  • Required to create PI category CS11 and how make it working in co60.

    There is a requirement to proess instruction category "CS11". That is PI category to display BOM level by level.
    What kind of setting need to be done.
    I could see from the existing PI category, within PI category there are list of several characteristics available.
    My query is how to create PI CHARACTERISTIC
    and how to assign these characteristics in the PI category while we create PI CATEGORY.
    and also how to assign the characteristics value.
    Someone, please tell me the entire procedure
    to create the CS11 PI category and make it working by assigning this control recipe destination, and finally make it working in
    CO60 to display and process cs11 transaction.

    Hi,
    To debug it on production, can you check on the hot-deployment area of Spaces apps to validate the shared library reference is updated in weblogic.xml is picked up:
    WebCenter_Domain_Home/servers/WC_Spaces/tmp/_WL_user/webcenter_11.1.1.4.0/<depl_prefix>/war/WEB-INF/weblogic.xml
    - Substitute respective depl_prefix with latest hot deployment folder created inside WebCenter_Domain_Home/servers/WC_Spaces/tmp/_WL_user/webcenter_11.1.1.4.0 directory for your instance.
    Cross verify the shared library reference for the ADF taskflow is reflected in the weblogic.xml for the Spaces server to reflect it.
    I hope it helps
    Thanks,
    Pramod

  • I've been using FCP 7 on my iMac for quite some time with great success.  Lately I created a new project and the browser window does not format properly (it's O.K. for previously created projects). The effects window is also not displaying properly.

    Help! My browser window is suddenly not formatting properly. (losing browser formatting, glitch, bug)  I'm using FCP 7 on an iMac with OS X 10.8.5 and have been successfully doing so for a couple of years.  I fear my Final Cut Pro is corrupt and I have to re-install. Anyone ever see this problem? Old projects display and behave fine in the browser, but any new project I create, totally loses the formatting in the browser and the browser also does not display the "effects" window properly anymore. (see below)

    YOU ARE A LIFE SAVER!  I reinstalled the program and everything. THANK YOU! THANK YOU! MY HERO!!!

  • How do i save a calender i have created with the photo and the dates saved on separate pages?

    how do i save a calender i have created in photoshop with the photo and the dates saved as two separate pages?  when i save as pdf or jpeg they are authomatically saving 1 pg with the photo and dates on one page.  This is causing problems when i print.

    Hi there, in case your printer cannot print very large, you can also crop down two versions and print them as separate documents.
    1) Create a guide where you would like to split the pages by clicking on the ruler (hit command R if they are not showing) and dragging to the desired area.
    Creating the guide will make it so you can be precise in the way you split up your page, and so that no part of the image will be repeated or lost.
    2) Select the Crop Tool and fit the crop area to the top half of your calendar, using the guide you've just made to snap to the right spot. Hit return to finalize the crop.
    3) Go to File > Save As. Name the file something like calendar_top and select the desired file format. Hit "Save."
    4) Once you get back to your calendar file, Go to the History panel and select "Drag Guide." This will take you back to the step before you cropped the image.
    5) Repeat the steps as before for the bottom half of the calendar, once again using the guide to help you make your crop area.
    So then you would just print each of the two pages individually. The images will not be contained within one document, but if you have Acrobat you could combine the files.
    I hope this helps!

  • Editing a Web Photo Album Created With Dreamweaver CS3 and Fireworks CS3

    I created a web photo album with DW CS3 and FW CS3. I want to
    add and delete some of the photos in the collection. So far, the
    only way I have been able to do this is to recreate the whole thing
    from scratch with all the correct pictures in the target folder. Is
    there an easier way?

    I could be wrong (we only test Adobe widgets for the quality
    of their output
    code, not for features, or lack of features) but recreation,
    as Patty said,
    might be the only way. If you have a development budget, you
    might want to
    take a look at some commercial tools that would have the
    features and
    capabilities you want or need.
    Al Sparber - PVII
    http://www.projectseven.com
    Fully Automated Menu Systems | Galleries | Widgets
    Lightshow Magic: the new wave...
    "AmateurWebMaster" <[email protected]> wrote
    in message
    news:g6kf6v$o1l$[email protected]..
    >I created a web photo album with DW CS3 and FW CS3. I
    want to add and
    >delete
    > some of the photos in the collection. So far, the only
    way I have been
    > able to
    > do this is to recreate the whole thing from scratch with
    all the correct
    > pictures in the target folder. Is there an easier way?
    >

  • Rtf Templates created with BI Publisher 11.1.1.3.0 not working in APEX

    I created templates using BI Publisher v10 Desktop that I used to create Report Layouts in APEX and everything worked just fine. However, I've upgraded to BIP 11.1.1.3.0 Desktop and the rtf templates don't work. I suspect that the problem is with the graphs.
    Is there something in my APEX environment that needs to be upgraded or modified to be compatible with the BIP v11 templates? Are templates created with BIP v11 compatible with APEX Reporting?

    I'm having a similar issue with 11.1.1.3.0
    My RTF templated uploaded to APEX correctly, and seems to load and generate ok. The OUTSIDE formatting on the report (title, etc) all seem to show fine, but the actual repeating data block doesn't show any of the data or columns or boxes..... Just the column headers.
    VERY FRUSTRATING......

  • BEx Analyzer with GUI 720 and MS Office 2010 does not work

    I have recently installed SAP GUI 720 with BEx addon (7 and 3.x) on a computer with Office 2010 and Windows 7.
    All BEx components work fine except Analyzer 7.
    When starting Analyzer 7 nothing happens.
    I have tried instead starting transaction RRMX from a BI system but this generates a short dump.
    Does anyone have an idea about what could be the problem?
    <<text removed>>
    Best regards,
    Didrik
    Edited by: Matt on Sep 22, 2010 8:17 AM

    Hello Didrik von Essen,
    guess its issue with Excel Addins.  i rectified the same issue by enabling the excel addins.go to Application wizard. and change the  please find the screenshot . let me know if it works

  • Issue with Home Address and Phone of ESS(data not getting saved)

    Hi Everyone,
    We have a issue with ESS HomeAddress and Phone.  when we edit and save data, its showing a message that data is saved.  but the data is not getting updated in the backend and the view also is showing old data only.  Pleas help us, if anyone came across this type of issue.
    Thanks & Regards,
    Ravi

    Please check the fields you are editing are not marked as unused in
    V_T588M
    V_T588MFPROPS
    V_T588MFPROPC
    Best wishes
    Stuart

  • With 'Mail v8' and 'Yosemite' accounts settings are not saved and I keep having to check the "SSL" box

    With 'Mail v8' and 'Yosemite' 'mail' "account settings" are not saved and I keep having to check the "SSL" box. This has only occurred since upgrade to Yosemite?
    Any help would be appreciated as this is so frustrating!!

    Update to 3.6.16 has fixed this problem.

  • Personas and PFCG Roles

    Hello community,
    I am working with a team to help deploy Personas for our production systems.  I was wondering if there was a way to provide access through PFCG roles in SAP?  I know about the admin transaction and how to give access there, but we are trying to make gaining access to personas an automated process.  Could there be a way to automically give access to everyone in SAP without ever having to look at the /persos/admin_ui transaction?
    If both answers are no, here is one more thought: Could personas access be given through automatic user provisoning in IDM?

    hi terrance,
    Using PFCG roles, you can create groups (under mass Group Maintenance) and then provide PERSONAS authorization to that group.
    For sync-up of users in that role on regular basis, check Tamas reply above.
    Best Regards,
    Sushant
    Sorry, my update over assigning personas role directly to a group was incorrect.
    Message was edited by: Sushant Priyadarshi

Maybe you are looking for

  • Help: the header and footer in the dreamweaver are doubled

    http://coolsite04.businesscatalyst.com/ this is my site how can i fix it. i'm using the basic template

  • External keyboard questions

    I want to buy an external keyboard for use when I'm not traveling. I am considering the Apple Wireless Pro keyboard and would welcome any opinions about that one or any others (wireless OR wired) you like or dislike. Another question is about mice/tr

  • How do I fix the screen?! D;

    My ipod touch 4th gen. screen went completely dark but it is still on and I can barely use it if I hold it at a certain angle...

  • Cumulative Balance & P/L Reports

    I have to create two sets of reports on cumulative balance and P/L based on my general ledger cube. How would i do that. Which Key figures should i use for each of them. I need to have them with a month-to date, quater to date and year to date looks.

  • Pictures disappear when placed on the map

    Anyone else put photos on the map and then have them disappear? Then when you go to the project they were in they are gone from there as well. The numbers on the right side of the project say they are there but any view you use is blank. If you use a