BP - Employee relationships to an org unit and changes

Dear Colleagues of CRM,
The scenario pertains to an employee and its relationship to an org unit to which it is assigned. Once an employee is assigned to an org unit, a relationship too gets created with the Employee as BP. This relationship has the contact info that was available in the BP master data at that point of time.
Later on, if the employee is transferred and hence assigned to another org unit, the assignment in the org unit is changed to the new org unit. On the new org unit assignment, a new relationship gets created with the BP. However, the earlier relationship doesn't get deleted when the earlier assignment to the org unit was deleted. If I attempt to delete the relationship in the BP, it doesn't allow and prompts to u201Cu2026.Change through the HR mastersu201D.  The HR master though has nothing of the contact details vis-à-vis this relationship.
The existence of this initial relationship is causing error in all my dependent programs / activities which pick up the contact details of this employee and hence trigger emails etc.
Request solution as to how do I remove this u2018oldu2019 and irrelevant relationship from the BP. It may be noted that the subsequent changes of assignment u2013 deletions in particular u2013 are deleting the relationship too but the initial one exists all throughout.
Seek your kind advise to resolve the matter .
Regards,
Tariq

Contact SAP they have given two custom reports to check and repair BUT050 entries when we have similar issue.
Regards,
Rajesh.

Similar Messages

  • Employee works for 4 org units and want to distribute the cost to 4 cost ce

    Hi Experts,
    I am in the implementation phase, requirement gathering.
    I have scenerio where, Employee works for 4 org units and want to distribute the cost to 4 different cost centers.
    so that I can be able to find the exact cost occured for each Org unit.
    Please let me know how to map this in SAP?
    P oints will be rewarded fully
    Kindly dont post if you are not sure of your solution friends.
    Thanks
    Jay

    Hello,
    Infotype 0027 is the standard solution for multiple reporting / multi tasking in SAP.
    but also check which org unit he will be primarily assigned.
    Regards

  • Creation of Relationship between an Org Unit and ROSTER

    Hi All,
    I have Done All the Back end Settings For Roster.However when i am trying to Create relationship between Roster and an Org unit,there is no avaibility Of Rosters.Can Someone Please Guide me Out.
    Thanks,
    Punam

    HI,
    There are standard  relationship for Rosters (91 ,92 ,93 and 94),
    but befor doing all the configuration you have to activate switch for roster
    Go to transaction SHDG
    Choose the path Application Components-> payroll->India->India public sector.
    Click on change Global fields Icon and add the value as u2018Xu2019 for data element u201CPIN_SW_INPSu201D.
    Activate the entry
    Warm Regards,
    Kapil Kaushal

  • How we will create relationship with org unit and task catalog

    HI Experts
    How we can create relationship between Org unit and Task Catalog in Organisation management once we grouped all the tasks in one group.
    For Example we have one org unit under that we have 3 depts those will consider as org units only.under 3 depts we have professor,Lecturer,Reader as jobs and positions also.If we create Professor tasks in task catalog which all the tasks will be assigned to positions as well.
    If it is Org unit and Task catalog how we can create relationship.
    Thanks
    Rajji

    Hi,
    Please try.
      DATA: lt_hrp1001 TYPE STANDARD TABLE OF P1001.
      DATA: lw_hrp1001        TYPE p1001.
      lw_hrp1001-mandt = sy-mandt.
      lw_hrp1001-plvar = parent_pos-plvar.
      lw_hrp1001-otype = parent_pos-otype.
      lw_hrp1001-objid = other_pos.
      lw_hrp1001-istat = parent_pos-istat.
      lw_hrp1001-begda = sy-datum.
      lw_hrp1001-endda = lc_endda.
      lw_hrp1001-infty = '1001'.
      lw_hrp1001-aedtm = sy-datum.
      lw_hrp1001-uname = sy-uname.
      lw_hrp1001-rsign = codes.
      lw_hrp1001-relat = relats.
      lw_hrp1001-sclas = lc_sclas.
      lw_hrp1001-sobid = cord_pos.
      append lw_hrp1001 to lt_hrp1001.
          CALL FUNCTION 'RH_INSERT_INFTY'
            EXPORTING
              fcode               = 'INSE'
              vtask               = 'S'
              commit_flg          = 'X'
            TABLES
              innnn               = lt_hrp1001
            EXCEPTIONS
              no_authorization    = 1
              error_during_insert = 2
              repid_form_initial  = 3
              corr_exit           = 4
              begda_greater_endda = 5
              OTHERS              = 6.
    Hope this helps.
    regards,
    Xiang Li

  • Org Unit and Cost Center not displaying in 0001 with A012 relationship

    Hi Guru's,
    Kindly help me in this regard ,
    Whenever i hire a person to a position which has an A012 relationship (Chief Position) then Org Units and Cost centres are not getting displayed in IT0001 .
    But when i hire a person in the same org unit with A003 relationship ; both Org units and Costcentres are getting displayed
    I have used an LSMW for uploading relationships and objects and i have also run integration reports for the same but still i am not able to display org unit and cost centre in it0001 when i hire a person with A012 relationship .
    Kindly Help

    both great advice, also, check this link:
    http://help.sap.com/saphelp_45b/helpdata/en/14/d22fe48435d111950d0060b03c6b76/content.htm
    within this information there are various reports to run, which help recon OM and PA integration.  it will help you find your data problem and then fix the data for you if you follow step by step.
    best regards,
    michael

  • Mismatch between Employee Org Unit and HRP1001

    Hi,
    I am facing one peculiar issue. The Org Assignment for a person is showing a set of Position, Job and Org Unit. But when I check the HRP1001 table for that position, the OU Relation shown is different.
    On prodding, user told me that, they have deleted the relations table completely and renamed Org units and loaded fresh relations (O-O, O-S).
    My understanding is: PA0001 will pickup the relationship from HRP1001.
    Please correct me if I am wrong and how do I rectify this issue,
    Thanks & Regards,
    Vijay

    HI,
    Look out for RHINTE Reports ( RHINTE00 -40) REports.
    ( T code - SA38) - RHINTE00... )
    For more details on RHINTE reports look for existing posts on SDN.
    Thanks & Regards,
    Param

  • How to copy the  positions and their relationships of one org.unit to other

    f there about 20 organization units among which 6 org.units have same positions and same relationships ,i know that we can create one org.units and their relationships among 6 similar org.units and then copy the same position and relationships to other 5 org.units as well instead of individually creating positions and assigning relationships to them  which results in wasting a quality time.but i dont know how to copy it? so please help me by informing me in details how to copy the positions n their relationships to other org units.

    Hi.
    This may sound like a bit of a pain in the *** but why not save the channel strip settings into your own folder then that way you can open them up in other songs and you have some channel strips to try out when you cant find anything else to fit. Plus its fun to open up lots of different audio onto the tracks and see what the effects sound like, Brian Eno style.....
    Hope this helps

  • How to extract an employee reporting hierarchy per org unit in spreadsheet

    Hi Guys,
    Can any one advise if there's a standard report I can use to see employee's  reporting hierachy in spreadsheetformat ?
    Report must have per org unit positions with their  related positions :'reports to' A002  relationship between two positions in a specific org unit and person's name/employee number occuping the positions.
    I tried creating joint table but battling to undestand how I can have the two related positions info in the infoset.
    Current standard report give me only positions with reports to relationship but haven't found report showing me positions with reports to relationship and their related position.

    Have you tried using logical database PCH? That gives flexibility to create this kind of report. Create an infoset in SQ02 and an Adhoc Query in SQ01 based on PCH Logical Database. You will need the relationship subtype 'A002' and related object type 'P' on selection screen.
    Edited by: Shafiq Rehman on Feb 6, 2008 4:23 PM

  • Need to get employees belonging to this org unit + its lower level org Unit

    Hi ,
        We have a requirment where in which we need to get all the employees belongs to a perticular in an     
        organization UNIT and its lower level org units.IS tehr any FM to find the same.
       i.e if we input org unit then it should return all the employees belonging to this org unit + its lower level 
        org unit(B002 relation ship)
       Any inputs are appreciated..
    Regards,
    Zareena.

    Hi Zareena,
    This is wht i understood in org management...
    evaluation path is the relation between two entities,
    entities may be
    job(C)
    position(S)
    Employee(P)
    Org Unit(O)
    O - O is line mangaer,
    S - O belongs to,
    P - S is owner of.
    i think if u observe O - O is line manger.. means in with same position
    S - O means that position belongs to the Org Unit
    P - S means the employee has that Position.
    All these type of relations will me maintained in the Infotype 1001 with the raltionships.
    All object types will be maintained in the Infotype 1000.
    Regards,
    Sreenivasulu Nallani.
    Award points if helpful..

  • % distribution of all the employees in a particular org unit

    Hello To all,
    I am working in Objective Setting and Assessments, I am having a one reporting requirment where I need to show % distribution of all the employees in a particular org unit. I kept 0ORGUNIT in row and Keyfigure 1ROWCOUNT in column,
    I have created a formula for % distribution of all the employees -> %GT " No. fo Records"
    I am bit confused that weather i should take %GT or %CT, %RT
    Wt is difference between that formulas.
    Kindly suggest
    Thanks
    Shalini

    Hi Shalini,
    %CT gives the share of the result, for example in a Regios if you have 10 employees then for each row it gives the employee share for that Region.
    %GT gives the share of the result from the Grand Total, for example if you have 10 regions then it caluculates each row it gives the employee share from all the Regions Grand Total.
    %RT gives the share from the Report Result for each employee.
    In your case you need to use the %GT, then for each region result area it gives % of distribution of all the employees.
    Hope this helps.
    Veerendra.

  • Managing Org  units and Master Data in project structure

    How are Org units and Master data managed at the project structure? What would be the appropriate place holders for them in the structure. Should we manage it at the top of the project structure or within the  business scenarios/processes. On what basis should we decide this? How would this impact in case of a global template rollout?
    Please share your experiences regarding this.
    Thanks.
    Mike

    any talented  guy do this way.
    i think  that ur working  in E2E project work
    before  singoff ur business process u should give to ur users  master data templets..they collect for  masterdatas in before realization phase...that time  u should know  how many specifications is there and  in spections how  many in quantitative and how many qualitative u will indentify. if any query let me  back.
    Edited by: Lakshmiananda prasad on Oct 6, 2009 11:48 AM

  • Transport of org.units and structure

    Hi all
    I know there is a possibility to transport org.units and its structure (PPOMA_BBP). There are some settings to do in table T77S0 (key = TRSP.CORR) and 2 reports RHMOVE30 and/or RHMOVE50 to be used depending on the setting done in T77S0.
    It is also required to configure ALE distribution model with IDoc type HRMD_A.
    My question is: what do I have to include in the filter? What are the relevant info types to be replicated via ALE?
    We're on SRM 4.0 with SRM Server 5.0 SP08. We don't have HR module in SAP R/3 in use.
    Thanks anyone for some help regarding this one!
    Kind regards,
    Renaud

    Hi Renaud ,
    Yr business card does not carry ID.
    PL. mail me to have a detailed doc on yr question.
    [email protected]
    BR
    Dinesh

  • Org. unit and associated material groups download from Org. structure

    Hi,
    I want to download the material groups and associated material groups(Defined in External attributes) from organisation structure.
    Please suggest how to do it.
    Best regards,
    Sambit

    Hi. There's a point. You said you wanted to download a list so I presumed you wanted all the org units and all the material groups assigned to them.
    If you only want to do it 1 org unit at a time the function will work perfectly.
    I f you do want to see all I have had another thought actually.
    You could run program RHOMATTRIBUTES_REPLACE.
    This allows you to replace 1 attribute with another, but if you do not press the "change" button it works as a good report on attributes.
    If you just put in attibute PRCAT and then Old Value = Logical System of backend and New Value = Logical system of backend and tick substring then execute, it will show you all the org units and all the material groups.
    Just be careful not to press the replace button on the output, that would actually change data.
    Regards,
    Dave.

  • Creation org unit and subarea

    create  a org unit and a sub area

    Please describe your issue in detail.
    Create org-unit: PPOC_OLD
    Create sub-area: IMG--> Enterprise structure --> Definition --> Human Resourece Management --> Create Personnel Area/Subarea.

  • Is it possible to get a report showing Org Units and Number of Positions.

    Dear SAP Gurus,
    I am looking for a report about org units and no.of positions held by this org unit.
    eg :
    CEO(35)
      Department(35)
      ACS (5)                         ABC(30)                  
    AC1(2)  AC2(3)       AB1(10)  AB2(20)      
    The numbers in the brackets are all no. of positions under that org unit.
    I Hope you understand my request.
    Thanks

    S_AHR_61016512
    S_AHR_61016513
    and check the tcode SAP1 in that OM module reprots

Maybe you are looking for