BP ID in HR - Hiring for an existing BP ID
Greetings,
How could we hire an Employee using an existing BP ID that had been created thru a different system (CM or CRM)?
Is there a BAdi that could be implemented to check for duplicate and allows us to use an existing BP ID?
Thank you very much for your help!
Kind Regards,
Ahmat Acyl
Hi
I did the same before i post this, but the system shows message that central person already exists for thi.
I think we need to maintain some relation ship here. and could you please let me know that where extactly the BP data will stores in the system.
thanks
Satish
Similar Messages
-
I have bought an used Iphone 5. I dont have the password for the existing login id of the old owner. How do i use the phone and change the log in id?
Unfortunatly the only way that you can get it off is to get the old user to input the password. You may need to contact that old user and see if he can put the old password in. hope this helps.
-
Error while Installing the Java Add-In for an Existing ABAP System
Hi all,
I need help, i am Installing the Java Add-In for an Existing ABAP System
SAPInst stops on the first installation step: "Central Services Instance (SCS) Java Add-In", the step is "Install common system files" on the following sub-steps:
These are the last few lines on the sapinst.log.
INFO 2009-05-21 12:35:12
Execute step createAccounts of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
INFO 2009-05-21 12:35:18
Execute step setUserEnvironment of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
INFO 2009-05-21 12:35:19
Execute step InstallJDBCDriver of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_JDBCDriver_DB4|ind|ind|ind|ind|4|0.
INFO 2009-05-21 12:35:19
Creating directory V:\sapmnt\BIQ\jdbc.
INFO 2009-05-21 12:35:19
Creating directory V:\sapmnt\BIQ\jdbc\tbx.
INFO 2009-05-21 12:35:21
Copied file 'V:/QIBM/ProdData/HTTP/Public/jt400/lib/jt400.jar' to 'V:/sapmnt/BIQ/jdbc/tbx/jt400.jar'.
INFO 2009-05-21 12:35:22
Execute step updateNtPatchDlls of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
INFO 2009-05-21 12:35:23
Execute step sCreateSystemOS4 of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
ERROR 2009-05-21 12:35:42
MOS-02001 Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
ERROR 2009-05-21 12:35:42
MOS-02001 Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
ERROR 2009-05-21 12:35:42
FCO-00011 The step sCreateSystemOS4 with step key |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0|sCreateSystemOS4 was executed with status ERROR .
Thanks in advance for any help.
Kiran ChebroluHi,
Hope this note would solve your issue, please read carefully and validate with your issue
Note 1032019 - Java Add-In: Error when you create the SCS instance
below notes give your suffice information.
Note 883948 - NW 7.00(2004s): Inst.Add.Java Usage Types/Software Units
Note 1268493 - NW 7.01/BS 7: Inst.Add.Java Usage Types/Software Units
Note 1025789 - RUNR3CMD generates CPF0006
regards
nag -
Reg creation of new Tcode for d existing Tcode
Hi ,
i need to create new Tcode for d existing Tcode. For Ex. for abap editor Tcode is SE38.for dis i want to create a new Tcode like Z_se38.how can i do it.Plz explain me clearly.very urgent
Thanks in Advancehi,
how to create a a T-code of that
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm38 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Rgds
Anversha -
New company code configuaration is added for the existing company
Hi Guru's
New Company Code is to configure for the existing company. Already we 20 company codes.
Now Business users want new code for the country australia.
Please let me know what are the steps to configure the new company code.
I appreciate your help and coperation.
Regards
JennyHi jenneyc,
1.1 Define and Assign Company Code
1.1.3 Assign Company Code to Controlling Area
1.1.4 Create new plant
1.1.5 Define and Assign Sales Organization
1.1.5.1 Copy Sales Organization
1.1.5.2 Change name and address of Sales Organization
1.1.5.3 Assign Sales Organization to Company Code
1.1.5.4 Assign Sales Organization ‑ Distribution Channel ‑ to Plant
1.1.6 Delete Purchasing Organization assignment to Company Code
1.1.7 Define Variants for Open Posting Periods
1.1.8 Open and Close Posting Periods
1.1.9 Assign Posting Period Variants to Company Code
1.1.10 Create Number Ranges for document posting for company code
1.1.11 Asset Accounting - Specify Number Assignment Across Company Codes
1.1.12 Creation of House Bank and Bank accounts
1.1.12.1 Define House Banks
1.1.12.2 Define Lockboxes for House Banks
1.1.12.3 Define Posting Data
1.1.12.4 Set Up Payment Methods per Company Code for Payment Transactions
1.1.12.5 Set Up Bank Determination for Payment Transactions
1.1.12.6 Create Check Lots
1.1.12.7 Create Program Variants for RFFOUS_C
Along with above we need to do LSMW for GL a/c company code data have to upload, and foreign currency Configuration require...!
I hope this info will helpful to you..!
Rds,
ANil -
i bought a new computer and would like to use it for my existing iphone. the iphone is registered on my boyfriends computer as of now. i dont want to lose all of my data in the process. how would i go about doing this?
Copy the iTunes library from your boyfriend's computer to your computer. Then when you sync you won't lose anything.
-
Installing Java Add-In for an existing ABAP System -Error SQL compatibility
Hello gurus,
We have a system and it has only the ABAP instance! So my goal is install the JAVA iinstance. In this momment I´m reading the section "4.4.2 Installing the Java Add-In for an Existing ABAP System (Optional)" in installation guide "SAP ERP 6.0 SR3" (ABAP+JAVA). So, I want to install the JAVA instance which is the Java Add-In for an existing ABAP system!
So what I did was followed that instructions on that section in guide!
As you certainly know this process has three sequential phases:
1) Central Services Instance (SCS) Java Add-In
2) Database Instance Java Add-In
3) Central Instance Java Add-In
The first phase - Central Services Instance (SCS) Java Add-In - it already finished with success, but I´m faccing with a weird error in second phase Database Instance Java Add-In when I entered all required input parameters, SAPinst shows an error that says:
The database PRD has the wrong compatibility level. The database used for the installation of an SAP system must have compatibility level: 80 for MS SQL Server 2000 90 for MS SQL Server 2005 SOLUTION: See the MS SQL Server documentation on how to set the compatibility level for a database.
I don´t know what´s happen, in fact my database is an SQL Server 2008 (100), but I already change it at management studio, the compatibility level to MS SQL Server 2005, but still the error remains!!! I also tried to ran again the sapinst process, I restarted it but it still show me this error!!
Can you tell me why and how can I solve this problem?
Best regards,
João Dimas - PortugalHello Sunny,
I still have this error... I don´t know what do to more for this situation!
I found one not which report this error of compatibility - Note 1152240 - Setting Up Microsoft SQL Server 2008 (R2) - in chapter "VII TROUBLESHOOTING" which said to follow the instructions in chapter III - "Installing SAP systems based on SAP NetWeaver 7.0 SR3".
When I read this last chapter (III) it tell us to do:
If you want to install an SAP system based on SAP NetWeaver 7.0 SR3 on SQL Server 2008, you cannot use the Installation Master and Kernel DVD that you received from SAP or downloaded from SAP Service Marketplace. Instead, you have to do the following:
Patch your runtime libraries by applying the procedure that is described in note 684106 for your release and machine architecture.
Use a modified Installation Master DVD
For more information, see section "VI PROCEDURES" -> "Creating a modified Installation Master DVD".
Use a modified Kernel DVD
For more information, see section "VI PROCEDURES" -> "Creating a modified Kernel DVD".
I did everything that is said in the note (except the "Creating a modified Kernel DVD") because I can not access to the note 1480785 (it say: "The requested SAP Note is either in reworking or is released internally only")
Can you help me... can you guide me... please!?
Best regards,
João Dimas - Portugal -
Installing the Java Add-In for an existing abap system
Hi, Currently we are Installing the Java Add-In for an existing abap system.
Following the steps (Installation guide):
1) We sucessfully installed the Central Services Instance (SCS)
2) We sucessfully Installed the Database Instamce Java Add-In
Our problem comes in the third step
3) Central Instance Java Add-In
When the system prompts me the SAP System Identification (Select the central instance of your local host).
I have a combo with two values: DVEBMGS00 of SAP System DEV and DVEBMGS00 of SAP System DEV
(The same value)
I chose anyone, and click next.
The system send me an Input error and says "Caught EKdException in Module call: single select return more than on row"
Any help is appreciated, and I will reward points if helpful.
RegardsI followed an advice made for a sap consultant, and delete some profile files.
I had the following files
DEFAULT.1.PFL
DEFAULT.2.PFL
DEFAULT.BAK
DEFAULT.PFL
DEV_DVEMGS00_bsomtymx005
DEV_DVEMGS00_bsomtymx005.BAK
DEV_SCS01_bsomtymx005
START_DVEBMGS00_BSOMTYMX0
START_DVEBMGS00_bsomtymx005
START_SCS01_bsomtymx005
after to delete the files, I have the following files
DEFAULT.BAK
DEFAULT.PFL
DEV_DVEMGS00_bsomtymx005
DEV_SCS01_bsomtymx005
START_DVEBMGS00_bsomtymx005
START_SCS01_bsomtymx005
Then, I restarted the installation, and the sapinst allow me to continue with the installation.
I really do not know if the installation will be sucessful, but this issue is solved.
Thanks shanji, I was working in another tasks, but with your help, I will try to resolve again this problem, and found the solution. -
Legacy data transfer for new depreciation area for already existing assets
Hi all,
I am doing legacy data transfer for New deprecaition area for already existing assets through AS92.
I like to give Ordinay depreciation posted amount for the current FY for these assets in AS92, but i find this field is not editable inAS92.
Please guide me to upload the Posted deprecaiton amount (for current FY) for these assets. I have assets both which are acquired in Last FY year and also this FY year.
Regards,
SrinivasHI,
I have to migrate Posted dpereciation for new depreciation for nearly 3000 assets, In transaction 147, where i need give Acquituion value aslo, please note these are not new assets, these are prior year assets wiht opeing balances. If we use 147 system will take it is current acquition.
Please note my transter date is 28.02.2010, I have already run AFAB for this company cdoe Feb 2010 for other depreciation areas.
Now i am trying to update Opening APC Cost and Opening Accumulated deprecation for these assets and also posted depreciation for this FY.
Where in AS92, i am able to update Opeing APC Cost and Opeing Acc Dep succsfully for new dep area for already existingassets, bu Posted deprecation field is not editable.
Please guide me how to update posted deprecation for new deprecaition area in AS92 or some other way for already existing assets.
REgards,
Srinivas -
How can I create index(uniqie index) for a existed table?
Hi guys,
I want to create a index for a existed table, it should be unique index. I did it using se11, "indexes," and select the radio button "unqiue index", of course the fields as well. But when I activate it, I get a waring and therefore can not create this index. But if I select radio button "non-uniqe index", it works.
However I have to reate a unqiue index.
How can I do it?
Thanks in advance
Regards,
LiyingHI Wang
You can create your index via SE11, enter the table name, click change, choose Go To, Indexes. Here create your index with the key fields that you want. To use the index, your select statement WHERE clause, you must have the key fields of the index in the order that they appear in the index. The "optimizer" will choose the index depending on your fields of the WHERE clause.
One thing to remember is that when you create indexes for tables, the update or insert of these tables may have a slower response then before, I for one have never seen a big problem as of yet.
this Document may help u on primary and secondary indexes :
http://jdc.joy.com/helpdata/EN/cf/21eb20446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb47446011d189700000e8322d00/content.htm
If it helps Reward the points
Regards,
Rk
Message was edited by:
Rk Pasupuleti -
We are going through with an upgrade/migration to SSRS 2012 and moving everything to a different domain. We have about 200 active subscriptions running, the reports are being delivered to a file share. What is the correct way, in bulk, to change
the OwnerId, the Path and the FileShare Username password credentials for these subscriptions? I see these values are being stored in Subscriptions > ExtensionSettings. I see that the file share path and Owner wouldn't be a problem to change,
but since I see the file share credentials are encrypted I would not be able change them directly in ExtensionSettings. Anyone know the proper way to change the Owner ID, Path and file share credentials for my existing subscriptions without having to
change each one of them manually in the report manager?
Note: Reporting Services Native upgrade from SSRS 2005 to SSRS 2012.
Thanks in advance.Hi Cygnus46,
Based on my understanding, you want to change the Owner ID, Path and file share credentials for all existing subscriptions.
In Reporting Services, the subscription information are stored in the Report Server database. In your scenario, you can go to report server database and run the query to list all the subscriptions, then modify the owner and fileshare paths in the subscriptions
table. For more information, please refer to this article: Tip: Change the Owner of SQL Reporting Services Subscription. If you want to change
the file share credentials for subscriptions, you can run the query provided by
wiperzeus from this similar thread:
Windows File Share Delivery/ SSRS 2008 R2.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support -
Function module for checking existance of rfc destination?
hi all,
is their any function module for checking existance of rfc destination?
regards
deepakHi,
check teh table 'RFCDES'.
reward if helpful.
Regards,
nagaraj -
Does JavaCC grammar file for JDOQuery exist? Antlr?
Does a JavaCC (java compiler compiler) grammar file for JDOQuery exist? This
grammar file is used as input to JavaCC to create a parser which would
verify JDOQuery setFilter input among other things. I would be interested of
a similar solution using Antlr. If you can shed some light on this issue,
please notify me ASAP.
Thanks in advance to all those who might reply
Richard BrousseauOn Mon, 17 Feb 2003 11:26:51 -0600, Richard Brousseau wrote:
Does a JavaCC (java compiler compiler) grammar file for JDOQuery exist?The JDO spec only includes the JDOQL grammar in BNF. I think the JDO
reference implementation available from Sun uses antlr, though, so you
might check there. -
Is it possible to change out of the box Callout content (change DOM elements) for already existing library using some javascript API?
API ?Hi,
We can use CSS and jQuery to achieve it.
Please add the following code into the Content Editor Web Part.
<style type="text/css">
.js-callout-content{
display:none;
.js-callout-mainElement span{
display:none;
.js-callout-mainElement{
border-width:0px;
</style>
<script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
<script type="text/javascript">
$(function () {
$("a[title='Open Menu']").click(function(){
setTimeout(function(){
$(".js-callout-body .js-callout-bodySection").eq(0).html("<span>Test</span>");
$(".js-callout-mainElement span").show();
$(".js-callout-content").show();
$(".js-callout-mainElement").css("border-width","1px");
},1000);
</script>
Result:
Best Regards
Dennis Guo
TechNet Community Support
Maybe you are looking for
-
What kind of longevity can I expect from the SSD in a new MacBook Pro with Retina Display?
Hi all, I recently ordered a new MacBook Pro with the Retina Display. This will be both my first computer and my first Mac that uses a SSD as the primary storage device. As the title of this post suggests, what I would like to know is what sort of li
-
On the Z key, the little scissor clip underneath on the right hand side has two little pointy bits which connect to the key, the top one of these has broken off and the key is barely hanging on, if pushed on the right side of the key, it pops up. I t
-
Auto-kick off MaxL script after Oracle GL data load?
Hi guys, this question will involve 2 different modules: Hyperion and Oracle GL. My client has their accounting department updating Oracle GL on a daily basis. My end-user client would like to write a script to automatically kick off the existing Max
-
How to unlock the request for a report and add the same query to new reques
hi, how to unlock the request for a and add the same query to new reques
-
:-( Same thread in several forum // Post title not explicit !
Hi forum users, Please, do not post several times your question. Please, put an explicit title ! ( Please refer to the chart // rules ) Regards, Erwan