BP view disappears when confirm BP in Identification screen in UTIL_IC role

Hi Experts,
As I confirm the BP in identification screen (UTIL_IC role) the BP view disappears while the Technical master data view is there on the screen , even the search results.
Steps in detail:
1. Login with UTIL_IC role.
2. Search for the Business Partner in Identification screen.
I get the search result and see the technical master data view but BP view is no more there , its all blank.
What could be the reason. I checked with the component IUICMD, DetailAccount view. It is all perfect as expected. I also checked with the view configuration and I do have entry for
Page: DETAILACCOUNT
config key: Default
component usage: Default
Object Type: Default
Object Subtype: Default.
My concern is that if something is missing in view configration at least default configuration should appear, how could it be blank.
please let me know if any solution.
Regards,
Rahul

Hello Rahul.
Check if DO_PREPARE_OUTPUT is redefined in your system for DetailAccount view. If so do you pass iv_first_time to super-class method?[ Here is the thread|Contact Person Standard address data disappears on enter(first time)BP_CONT; where similar issue was discussed.

Similar Messages

Design view disappears when I uncheck Restrict Page Occurrence

Dear Adobe Forms Experts,
I have an Adobe print form with two master pages: one mailing address page that should only occur once, as the first page, and then the main page, which can occur many times. I have been asked to make the mailing page conditional, based on the company code of the invoice. I followed a very useful discussion on SCN explaining how to do this with a HIDEPAGE global variable, wrapping all the fields on the page in a subform, and doing some FormCalc scripting for the subform.
I was able to get the page to print as blank when the HIDEPAGE flag was set, but so far I have been unable to get the mailing page to go away altogether.
I noticed that on the mailing page the "Restrict Page Occurrence" checkbox was checked, and the Min count was set to 1. Well, I thought, that could explain it; I'll just uncheck the "Restrict page Occurrence" checkbox, and all will be right with the world!
Wrong! When I uncheck that checkbox, the Design View for my mailing master page disappears, and the mailing page never prints, regardless of the state of my HIDEPAGE global variable! When I recheck the checkbox, the design view reappears, and the mailing page goes back to printing a blank page when my HIDEPAGE flag is set.
What in the world is going on here?! What am I doing wrong?
Cheers,
TerryB
P.S. I am using Adobe LiveCycle Designer 9.0, and I believe the form was originally created using 9.0

First off, in case anybody reading this in the future has any doubt, I will confirm that this discussion has morphed into the well-worn discussion on how to conditionally hide a page.
Pavan,
    I am now working on a copy of the original form, so I have the freedom to do whatever I want. First off, thank you for the suggestion of right-clicking on the "data" very-top-level node in the hierarchy view, and selecting "Insert subform". That did the trick for adding the missing design view for my mailing page.
    I am now trying to reduce things to their simplest form, to reduce the number of places I could be going wrong. The mailing master page now contains nothing but a content area (which appears to be required). The design view for my mailing page now contains only two objects: the "D_HIDE_PAGE" flag, (bound to the global field in the interface, where I have put the code to conditionally set the flag), and a subform called "Show_Hide", which is set to "flowed". The flag field is wrapped in the Show_Hide subform. I added the following FormCalc code to the Initialize, form:ready, and layout:ready events of the Show_Hide subform:
if ($.D_HIDE_PAGE == "X")
then
$.presence = "hidden"
endif
    When I do a print preview on the form for an invoice that does not set the flag, I see the label for my flag field on the mailing page. When I do a print preview for an invoice that DOES set the flag, I get a completely blank mailing page--but the blank page is NOT being suppressed!
    Just for grins I also tried adding the same FormCalc code to the same 3 events of the top-level subform of the design view (the one I added by right-clicking on the "data" node in the hierarchy view; I called this subform "MAIL_DESIGN"). Same results as before.
    I believe I've followed all the steps laid out in the many SCN discussions on this topic--but obviously I am still missing something. Any clues where I may have gone wrong?
Cheers,
TerryB

BUSINESS LAYER VIEW DISAPPEAR WHEN CREATED

I've created a new Business Layer View but it doesn't exist

Hi....
Same problem I'm facing also, All Business Layer, Data Foundation & Connection folder is disappear,
these folders & files is available in workspace folder but not showing in IDT Local Project Window
I tried to find out on internet but I did not get any reference, even uninstalled Business Object & install in my PC, still same problem,
we are using Business Object 4.1 (Client/Server) both side
Operating System Client : Windows 7
please see attached file
if anyone knows solution please share it, my all work stopped
Regards
Ali

Bookmarks toolbar Firefox 10.0.2/OSX 10.6.8 - gone. View Toolbars Bookmarks Toolbar - checked. Dragging URL's to bookmarks toolbar area no longer works. Gray area appears/disappears when checked/unchecked but will not show any or accept new bookmarks.

My bookmarks toolbar in Firefox 10.0.2 Mac OSX 10.6.8 suddenly disappeared. View>Toolbars>Bookmarks Toolbar is checked. Dragging URL's to the bookmarks toolbar area no longer works. The gray area appears and disappears when checking/unchecking under View/Toolbars menu, but will not show any or accept addition of bookmarks.

Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
*Open the Customize window via "View > Toolbars > Customize"
*Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
*If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
*If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
*http://kb.mozillazine.org/Toolbar_customization
*https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing

I have a spark textinput, this textinput is stuck and wont disappear when poping or pushing to a new view any idea ?

i have a spark textinput, this textinput is stuck and wont disappear when popping or pushing to a new view any idea ? also sometime this textinput and when scrolling is stuck in a certain x-y position and do not move with scroll
below is my code:
<s:BorderContainer borderVisible="false" backgroundImage="@Embed(source='../assets/BGNotifications.jpg')" backgroundImageFillMode="scale" width="100%" height="100%">
    <s:Scroller id="homeScroller" y="0" pageScrollingEnabled="false" name="homeScroller" height="100%" width="100%" horizontalScrollPolicy="off" verticalScrollPolicy="on" skinClass="Skins.HMobileScrollbar" >
        <s:VGroup width="100%" horizontalAlign="center" verticalAlign="top" gap="0">
            <s:VGroup horizontalAlign="center" paddingTop="45" paddingLeft="10" width="85%" height="100%" verticalAlign="top" gap="0">
                <s:TextInput id="txtUsername" width="{278 * txtRatio}" height="{40 * txtRatio}" borderVisible="false" color="#575757" focusColor="#C42828" textAlign="left" fontStyle="normal" maxChars="200" styleName="{MystyleAccordingToWidth}TextBox{resourceManager.getString('resources','ImageP ath')}" ></s:TextInput>
            </s:VGroup>
        </s:VGroup>
    </s:Scroller>
</s:BorderContainer>

Hi, it sounds like you are running into a known issue with a mobile app using the spark textinput (assuming its mobile as you are referring to piping and pushing views)
The kind folks over at Flexicious have provided a solution to this problem
http://blog.flexicious.com/post/Scrolling-Issues-With-TextInput-for-Flex-Air-Mobile-Native -StageText.aspx

Acrobat Pro Ver 9 for Win 7 the menu bar (File, Edit, View, Document etc) Disappears when I move the Window

Lately in Acrobat Pro Ver 9 for Win 7 the menu bar (File, Edit, View, Document etc) disappears when I move the window . . only happens when I have a pdf file open . . everything worked fine until a few days ago . . F9 fixes the problem until I move the window again . . I realize my version is old so I tried tried downloading XI reader and having the same issue . . any help would be appreciated

Hi Ernestprinter,
Check if you have multiple Java versions installed on your computer.
Try clean boot http://support.microsoft.com/kb/929135
Also i would suggest uninstall security software and install it back.
Currently you may use F9 key to restore Menu bar.
Regards,
Ajlan Huda.

Folio images disappear when viewed in content viewer

Hi, I am currently having a problem with most of the pdf images in the folio disappearing when viewed in content viewer on the iPad.
I'm using Adobe CS5.5 in layouting the folio.
Does anyone know how to fix this problem? Thanks.

If the images are visible when previewing through Folio Preview option, try reinstalling Folio producer tools and Folio builder Panel and reinstall Adobe content viewer. That might fix this.

How do I stop a notify icon appearing multiple times... then disappear when mouse hovers over them

Hi,
[Re-posted
from Outlook Dev Forum]
I have an Outlook addin which makes use of a System.Windows.Forms.NotifyIcon to display update message without requiring the user to click Okay to dismiss them...etc.
I declare and create it in the addin class (so not in start up or any other event) as:
Public WithEvents notifyIcon As New System.Windows.Forms.NotifyIcon
Then throughout in my code if I need to display a message I use notifyIcon.ShowBalloonTip. This works great, and I run it off the main thread as well as a syncing background worker thread. The problem is that when I go down and expand the
system tray, there are often many clones of the icon I use, which then disappear when I hover my mouse over them.
I understand this isn't an uncommon problem, and it happens also with new email icons in the system tray. However, is there any way I can prevent this from happening, or best practices I need to abide by?
In the Shutdown event I use:
If notifyIcon IsNot Nothing Then
notifyIcon.Visible = False
notifyIcon.Dispose()
End If
Any help would be much appreciated, since I can't seem to find any definitive info elsewhere online.
Thanks!
Tom
Note: I don't actually use a windows form with the notifyIcon, I just declare it as above... not sure if that affects anything?

Would this be the same as using the Application_Quit event for the Outlook addin? Since I've
seen that in Outlook 2010 onwards it doesn't call the Shutdown event now anymore, so you need to use the Quit event of the application to do any tidy up. Maybe that is why the icons are remaining.
Thanks,
Tom
Hello,
Wyck has shared a nice example with a form event, and for outlook 2010, we could deal with that notifyIcon inside application quit event.
Based on the document below you shared, it seems that you have found the reason, if that issue still exists, please feel free to let us know.
https://msdn.microsoft.com/en-us/library/office/ee720183(v=office.14).aspx
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

"Month View" Disappears

I've seen some posts on this before... anyone have any thoughts?
iCal works fine under the "Day" and "Week" views, but when I hit "Month View" it disappears from the screen. The program is still open, it just doesn't show anything. I have to switch the view back to Day or Week in order to see anything in iCal after that. My version is 2.0.5 (1069)
Thanks.

I also have a similar issue. I can view the previous month's month view and the next month's month view but this month shows month view as blank. If I then select week view, I get all my calendars. If I then click back on month view, iCal appears to freeze with a blank screen. However, just clicking on week view recovers and I can see my calendars again! Any ideas what's happened to iCal?
I've got iCal v3.0.4 (1263).
I'm also using M$ Office 2008 but I do not use Entourage and have never even started it up. I've seen some suggestions that Office 2008 has some impact.
Rgds,
Guy

I was using open office spreadsheet today and inadvertantly clicked on a menu item that caused the Apple toolbar to disappear when I am in open office. How do I get it back at the top of my screen? I am currently using OS 10 Lion.

I was using open office spreadsheet today and inadvertantly clicked on a menu item that caused the Apple toolbar to disappear when I am in open office. How do I get it back at the top of my screen? I am currently using OS 10 Lion.

Click on the Menu bar and go to View . Or, hover over where the Menu bar shiuld be and click on it when it appears. Try quitting and relaunching Finder.

Why does the tab bar on my iPad 2 disappear when I swipe down? How can I lock it in place?

Why does the tab bar on my iPad 2 using IO8 disappear when I swip down? Its annoying. I have to tap the top of the screen to view my open tabs.
why did Apple switch the position of the bookmarks icon and the favorites icon. Now I tap the wrong one.

There isn't a setting to stop the tab bar automatically hiding (or I haven't found one), and as to why the icons were moved I don't think that Apple have said. If you want to leave feedback for Apple then you can do so here : http://www.apple.com/feedback/ipad.html

How come my safari windows disappear when I close my laptop and open again? The safari windows I wanted to keep running for the next time I open my laptop disappeared. Why? Help me.

How come my safari windows disappear when I close my laptop and open again? The safari windows I wanted to keep running for the next time I open my laptop disappeared. Why? Help me.

Important note, do NOT sleep your macbook Air with headphones attached until this is resolved.
Ive done a good best of testing on same to confirm not to do that
also if you have the APP "BOOM" installed........ remove it

Question why has my balance on my itune account have totally disappeared when I have only been using it for less than a year? had still fair bit of money in it too. around $60

Question why has my balance on my itune account have totally disappeared when I have only been using it for less than a year? had still fair bit of money in it too. around $60

First, make sure you're logged into the iTunes Store using the account ID and password you set up, or used, when you redeemed your card/gift. If you are, try signing out of the account and back in.
If you're sure you are using the correct account and that you're signing in to the iTunes Store, and signing out and back in doesn't help, go to the Purchase History and review your purchases to make sure that you should indeed have a balance left. iTunes doesn't always refresh the balance it shows, so it's possible you spent the money and it just wasn't being reflected in the display. This display error can usually be corrected by logging out of the iTunes Store and then back in.
If you confirm that you should have balance left but the iTunes Store isn't showing it correctly, send a message to the iTunes Store customer service department through the contact form you'll find by selecting the most applicable section of their Support page (select the Contact Support link and follow the instructions) and explain the problem to them.
Good luck.

SQL 2012 sp1 EE setup disappears when installing Setup Support files ( Error: sqm does not have active session)

HI Folks,
WIndows : 2008 R2
SQL : 2012 sp1 EE
Setup disappears when installing setup support files On passiive node ( 2 node cluster), sql is runing on active node without any issue
Error : SQM does not active session ( In summary detail txt file)
blog is suggesting . Save the following in a .reg file and merge to populate the registry: (
here i am confusing how to save and where to save , how to merge and how to populate)
http://blogs.msdn.com/b/sqljourney/archive/2012/05/07/sql-2008-2008-r2-setup-disappears-fails-when-installing-setup-support-files.aspx
Can you share your views, if you need any information for clarification. pls let us know for resolution.
Thanks in Advance.

Sorry but there is already released SP2 for SQL Server 2012. Start installation on the passive node first
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Table number xrefs disappear when roundtripping the XML doc back to FM

I'm using FM 7.2p158 running on Windows XP on a Dell Optiplex GX520 with 1GB RAM. I've converted my legacy FM docs to structured FM, but my (CALS-formatted) table number xrefs disappear when I roundtrip the XML docs back to FM. How can I remedy this?
Initially, I used my own conventions to name the table part elements as I have about 10-15 specific table types and I used those Table Tag names as table elements names (Invisible2, Invisible4, StepTable, ...), so I had 10-15 elements that were true "is fm table element" types in the EDD, DTD, and R/W rules. The table number xrefs worked as they should after roundtripping FM-XML-FM and the tables' shading, ruling, and Table Tags were correct.
I consulted our XSLT developer for proper browser display of the XML files, and he suggested that I should use the CALS table model. I studied the Struct Dev Gd, then I searched this forum for postings on CALS tables and related topics and used suggestions offered by many of you good folks to create an EDD, DTD, and R/W rules to that end.
I've run some tests using many iterations of my files (both CALS and non-CALS types) to roundtrip the FM files, but I cannot get the xrefs of the table number from the CALS-version table title element to display when I roundtrip the XML doc and open it in FM. I get this:
-- In the XML doc text opened in FM, instead of "Table 1-1" for the xref, it leaves a blank space (although the source numbered table title is there).
-- In the Structure View of the same XML doc, I see the following:
- The CROSSREF element text says WHITESPACE.
- Both the CROSSREF element and its source element continue to have the (matching) "Idref" and "Id" number displayed in this view.
- The Idref attribute is disconnected from the CROSSREF element.
- The "table" element is disconnected from its container element (TableAnchor).
Once I apply the File/Import/Element Definitions command in the XML doc in FM, the XML becomes valid and both the CROSSREF Idref attribute and the table element are reconnected, but my xref of the table number is still WHITESPACE.
The XML-converted doc source text reads:
If you're using WebDrive, you will want to use the options shown
in [CROSSREF Idref = "BEHJCAJB" format = "Table Number"/] on the [IndexEntry
type = "Index" text = "WebDrive options"/]WebDrive control panel.[/Para]
[TableAnchor]
[table tabstyle = "Expressroom2" cols = "2"
colwidths = "2.198in 3.500in" colsep = "1" rowsep = "1"
frame = "all"]
[title Id = "BEHJCAJB"][?FM MARKER [Cross-Ref] 86302: TableTitle: Table 1-1
WebDrive control panel options?]WebDrive login values[/title]
[tgroup cols = "2" colsep = "1" rowsep = "1"]
[colspec colnum = "1" colname = "1" colwidth = "2.198in"]
[/colspec][colspec colnum = "2" colname = "2" colwidth = "3.500in"]
[/colspec][thead]
[row rowsep = "1"]
[entry colname = "1"][CellHeading]Field[/CellHeading][/entry]
[entry colname = "2"][CellHeading]Value[/CellHeading][/entry]
[/row]
[/thead]
But when I open the same XML-converted doc back in FM, I get the following:
"If you're using WebDrive, you will want to use the options shown in on the WebDrive control panel."
The CROSSREF Idref "BEHJCAJB" is [WHITESPACE] in the Structure View, so it's a blank space within the actual text in FM.
I have excerpts from my EDD, DTD, and R/W rules that I can post, but would make this even more lengthy. (Sorry about the current length.) What do I need to change to make the xrefs work when I roundtrip the files?
[I don't know whether it makes any difference or not, but I have changed the element names since I originally used a conversion table (to structure my legacy FM files); however, I persisted those element name changes throughout the EDD, DTD, and R/W rules files.]

I'm using FM 7.2p158 running on Windows XP on a Dell Optiplex GX520 with 1GB RAM. I've converted my legacy FM docs to structured FM, but my (CALS-formatted) table number xrefs disappear when I roundtrip the XML docs back to FM. How can I remedy this?
Initially, I used my own conventions to name the table part elements as I have about 10-15 specific table types and I used those Table Tag names as table elements names (Invisible2, Invisible4, StepTable, ...), so I had 10-15 elements that were true "is fm table element" types in the EDD, DTD, and R/W rules. The table number xrefs worked as they should after roundtripping FM-XML-FM and the tables' shading, ruling, and Table Tags were correct.
I consulted our XSLT developer for proper browser display of the XML files, and he suggested that I should use the CALS table model. I studied the Struct Dev Gd, then I searched this forum for postings on CALS tables and related topics and used suggestions offered by many of you good folks to create an EDD, DTD, and R/W rules to that end.
I've run some tests using many iterations of my files (both CALS and non-CALS types) to roundtrip the FM files, but I cannot get the xrefs of the table number from the CALS-version table title element to display when I roundtrip the XML doc and open it in FM. I get this:
-- In the XML doc text opened in FM, instead of "Table 1-1" for the xref, it leaves a blank space (although the source numbered table title is there).
-- In the Structure View of the same XML doc, I see the following:
- The CROSSREF element text says WHITESPACE.
- Both the CROSSREF element and its source element continue to have the (matching) "Idref" and "Id" number displayed in this view.
- The Idref attribute is disconnected from the CROSSREF element.
- The "table" element is disconnected from its container element (TableAnchor).
Once I apply the File/Import/Element Definitions command in the XML doc in FM, the XML becomes valid and both the CROSSREF Idref attribute and the table element are reconnected, but my xref of the table number is still WHITESPACE.
The XML-converted doc source text reads:
If you're using WebDrive, you will want to use the options shown
in [CROSSREF Idref = "BEHJCAJB" format = "Table Number"/] on the [IndexEntry
type = "Index" text = "WebDrive options"/]WebDrive control panel.[/Para]
[TableAnchor]
[table tabstyle = "Expressroom2" cols = "2"
colwidths = "2.198in 3.500in" colsep = "1" rowsep = "1"
frame = "all"]
[title Id = "BEHJCAJB"][?FM MARKER [Cross-Ref] 86302: TableTitle: Table 1-1
WebDrive control panel options?]WebDrive login values[/title]
[tgroup cols = "2" colsep = "1" rowsep = "1"]
[colspec colnum = "1" colname = "1" colwidth = "2.198in"]
[/colspec][colspec colnum = "2" colname = "2" colwidth = "3.500in"]
[/colspec][thead]
[row rowsep = "1"]
[entry colname = "1"][CellHeading]Field[/CellHeading][/entry]
[entry colname = "2"][CellHeading]Value[/CellHeading][/entry]
[/row]
[/thead]
But when I open the same XML-converted doc back in FM, I get the following:
"If you're using WebDrive, you will want to use the options shown in on the WebDrive control panel."
The CROSSREF Idref "BEHJCAJB" is [WHITESPACE] in the Structure View, so it's a blank space within the actual text in FM.
I have excerpts from my EDD, DTD, and R/W rules that I can post, but would make this even more lengthy. (Sorry about the current length.) What do I need to change to make the xrefs work when I roundtrip the files?
[I don't know whether it makes any difference or not, but I have changed the element names since I originally used a conversion table (to structure my legacy FM files); however, I persisted those element name changes throughout the EDD, DTD, and R/W rules files.]

BP view disappears when confirm BP in Identification screen in UTIL_IC role

Similar Messages

Maybe you are looking for