BPC 7.0 NW cubes data

Q1>What are the BPC consolidation dependant  setting required in FICO?
Q2>BPC 7.0 NW needs to collect the data from BW. The corresponding R/3 implemented is 4.7 version. If the bw data need to be supplied to BPC legal as well as management consolidaiton which is the ideal BW cubes data can be used?

Hi ManiIyer,
Following are some suggestion that you may utilize.
--> Utilize standard BI Extractors and Infocubes or You may create, copy  BI Infocubes or custom extractors.
--> Design BPC consolidation application based on your requirement. You need to setup consolidation environment in BPC.
--> Load data into BI infocubes using sap BI ETL
--> Move data from BI infocubes to BPC Cubes using BPC stabdard  Packages
--> You can define custom packages based on your requirement too
You need to do all consolidation configuration set up needed in SAP BPC by utilization of SAP BPC consolidation Procedures and SAP BPC requirements.
It is totally different when compared with SEM BCS but it it has so many features.
-Sreekanth

Similar Messages

  • BPC 7.5 will extract data from flat file or directly from cube

    Hi,
        i have a doubt plz give me a solution.
    1) previously our BPC 7.0 team extracted data from BI 7.0 through flat file, but now they have upgraded to BPC 7.5 i want to know whether BPC 7.5  will extract directly from our BW infocube or not.
    2) please let me know how data extracted from BPC 7.5.
    Thanks and Regards
            Satish

    Hi,
    If your import file has duplicate record in it then the Status of your DM package for import ends with warning, where all the records in your file might have got accepted but only one last data rows amoung the duplicate rows might have got submitted to the system.
    The duplicate records will be rejected and you can see the list of duplicate records as well in the DM package status report.
    Like Nilanjan said you can use Append DM Pacakge to submit all duplicate records aswell into the system. But here the problem is it appends the data in flat file with data available in the system.
    Say you have 100 for account1 in the system and you run Append DM Package having values duplicate values for account1 say 100 and 200. So after the Append Package execution you will have 100100200= 400 for account1.
    So for Append DM package to work in the same way as import, run clear package before executing the Append package.
    Hope this helps,
    Regards,
    G.Vijaya Kumar

  • BPC 10.0 NW - Journal data when clearing the data

    Hej Gurus,
    I have a quite simple question:
    When a journal i created and posted in the system, the journal is stored in a specific table for the model, and the data is stored in the cube. What is going to happen with the journals, if we clear the cube for all data, both journal and non-journal data. Will the journals still be posted in the journal table?
    The reason is, we have some scattered bad data that we would like to have cleared, and we want to know, if we can delete all data and import everything again without the journal postings are gone.
    Best regards,
    Mikkel Kristensen

    Hi Mikkel
    Journal stored in Journal Table along with BP Cube. Any point of time you want to delete due to Bad data. First you have to Unpost Journals that means No Effect in Journals or No Financials update. Then you can clear BPC Cube data.
    When you are ready for Journals  just simply Post from Unpost Journals. This process will ensure your data integrity.
    Otherwise you will have to face again bad data issue.
    In Short :
    When you decide to Delete Data from Cube:
    1. Unpost Journals from Post
    2. Delete Data from BPC Cube( from Backend)
    3,  Re-load Transactional Data
    4. Post Journals from Unpost
    Hope this will help you
    Thanks
    Venkat

  • Short dump while displaying cube data in production

    Hi Folks,
    I'm getting a short dump while displaying cube data in production, please suggest
    Thanks and Regards
    Santhosh

    Hi Santosh,
    I'd suggest to follow as per SAP Note: 568768 - Analysis of SQL Errors causing Shortdumps or Error messages. The Note contains precise steps to analyze such an ABAP dump.
    cheers
    m./

  • Objects are not referenced in cube data source view. Large model.

    Looking at large model. 100+ measure groups, 200+ dimensions, one cube. Deployed to multiple customers in production as a part of custom developed software.
    in data tools 2010 I'm looking at the cube on sql 2008, sql 2008 R2 (EE, DE).
    In the cube data source diagram we observe 50+ objects that do not have any links to them or from them.
    1)
    Some of these I was unable to find in DMV's of the cube at all, it turns out they are present in the Data source that is in Data Source Views section.
    How did these end/could end up in the cube data source model? they are not available in dimension usage window at all.
    2) Others do not have any links from them or to them in cube’s data source diagram, however the dimension usage clearly shows these objects are part of relationships 
    both regular and many to many depending on the object in question.
    We are trying to identify what objects we can ‘trim’ from the model. I’m not sure what am I looking at in this case: data tools have a trouble interpreting diagram for 200+ dimensions and
    100+ measure groups (it is a large existing model) and this artifact should not be used to decide what in dimensions is obsolete and can be decommissioned.
    We are looking at cube that has over 40 NxM just to one fact not counting regular relationships.
    Am I looking at a feature or maybe an issue with the model itself that somehow has developed in the particular cube.
    It is not something I came across before.
    thanks

    Hi，
    According to your description, you are designing a large SQL Server Analysis Services cube, the problem is that you are unable view the relationship in the data source
    view diagram, right?
    In your description, you said that you can see the relationships in Dimension Usage window. In your scenario, can you see the relationship under the Tables pane when expanding
    a table's Relationships folder?
    General, the relationships will be defined automatic if the relationships were defined in your data source of the cube. And the dimension relationships between cube dimensions
    and measure groups in the cube are defined manually in Dimension Usage. In your scenario, you can define relationship manually in the data source view, please refer to the link below to see the details.
    http://technet.microsoft.com/en-us/library/ms178448.aspx
    Regards,
    Charlie Liao
    TechNet Community Support

  • BPC Error while loading master data from SAP BW

    Hello Guru,
    I have NW BPC 7.5 installed on BW server. Currently i have started to work on one application where i have to load master data first. I am loading master data for cost center.
    I looked into the process chain "BPC: Import BW InfoObject master data" and i found that few processes are  in GREEN color and few are in RED color (Display). is that correct or not ? then as per some of the thread i went to "BPC: Convert BW infoObject master data" --> SOURCE_TYPE = IP  and added one parameter "FORMULA_FILE_NO". Then i saved this process chain and activated it.
    I created transformation file in BPC and it got created successfully but while i try to load packages it throws me error.
    Q. Do i need to have entire process chain with all processes in GREEN to have the master data in BPC ?
    Q. Do i need to activate any BADI's for this or not ?
    I appreciate your help in advance. I trie

    Hello Guru,
    Currently i am getting below error while loading costcenter master data from BW to BPC.
    Task name MASTER DATA SOURCE:
    Record count: 189
    Task name TEXT SOURCE:
    Record count: 189
    Task name CONVERT:
    No 1 Round:
    Info provider  is not available
    Application: ZRB_SALES_CMB Package status: ERROR
    Anybody can tell me, if i have missed anything ???
    Regards,
    BI NEW
    Edited by: BI  NEW on Feb 23, 2011 12:25 PM

  • How to do reconcilization of ODS data and CUBE data

    Hi All,
    How to do reconciliation of ODS data and CUBE data,I know how to do reconciliation of R/3  data and BW data.
    Regards.
    hari

    Hi,
    create a multicube based on your ODS and cube, identify commen characteristics and perform the key figure selections; create then a query showing both information from the cube and ODS with perhaps some formula showing differences between key figures.
    hope this helps...
    Olivier.

  • How can I  extract non-cumulative cube data to another cubes ?

    Dear Expert,
             I copied inventory cube 0ic_c03 to  a new cube : ZIC_C03  , then I loaded the data of 0ic_c03 to the new cube ZIC_C03 . 
    the loading was sucessful, but  the result of  report of the ZIC_C03 was not correct. After looking into the problem, I found out
    the new cube can successfully extract data related with "Goods movement" & "Revaluation", yet the extract of "Open Balance" does not seems to work.
             I have read through Note:375098, in which I could not find (InfoObject 0RECORDTP) in my start routine as mentioned in the solution
    ,and the note was not mentioned valid for BW 3.5 release.
             How can I  extract non-cumulative cube data to another cubes correctly in BW3.5 release SP20? 
       Thanks !

    Hi,
    Check Routines in Update rules wether same code is wrriten in  new cube
    cheers,
    Satya

  • Error occured while writing cube data

    Hi all,
    I was working around with the manage ownership section. When i tried to change [PCON] or [POWN] values and save it, I get an error message saying "Error occurred while writing cube data". After doing some googling I found out that this was because [PCON] and [POWN] are system accounts and hence we cannot submit data to it.
    Is there any way how I can resolve this issue? I have 2-3 entities which have minority and do not have 100% ownership/consolidation. Please help me out in this matter.
    Regards,
    Ramith

    It should work, check if this helps. Page 133 http://docs.oracle.com/cd/E12825_01/epm.111/hfm_user.pdf

  • Error occurred while writing cube data - PCon

    Hi,
    Could you help me? I have created new application, but when I try to enter and save PCon values, I get a message: "Error occurred while writing cube data.". What could be the reason? I was able to update other data forms.
    Thank you in advance

    It should work, check if this helps. Page 133 http://docs.oracle.com/cd/E12825_01/epm.111/hfm_user.pdf

  • Check cube data

    I have web query that i want to run. It's asking for certain variables eg : date.
    How can i check cube data to see what valid dates have been posted in the cube?
    so then I can put this in for the variable date ?
    thanks

    Hello MaGic,
    How r u ?
    Manage the Cube and check 0CALDAY (date) and then give the parameters.
    Best Regards....
    Sankar Kumar
    +91 98403 47141

  • How to make cube data avilable for reporting

    Hello,
    I have loaded data in to info cube from flat file, and created a query using BEx Analyzer. that query does not return results and gives an error msg "No Applicable Data Found".
    Padmanabha Rao had a same problem. In his thread, expert is recommending to check whether the data is available for Reporting by Rt clicking Infocube -> Manage -> Requests tab. Ideally, you'll be able see an indicator(Query icon) if it's available for reporting.
    My cube data is not available for reporting, how can I make it available for reporting?
    Regards,
    Tejas.

    Normally when the data gets loaded to cube, it will be available for reporting unlike DSO where you need to activate the data to make it available for reporting. There could be many reasons why the data is not available for reporting;
    1. May be there is aggregrates created on the cube and the data never been rolled up to the aggregates. If you see a summation sign next to the cube then there is aggregates created on the cube and you need to fill the aggregates first before you can have the data available for reporting in the cube. To do that, manage ->rollup and start, that will fill the aggregates.
    2. If there is any request in the cube which is still red, then any request after that won't be available for reporting until you either delete the red request.
    If the problem still persist, then I would just delete all the data from the cube and reload the data again.
    thanks.
    Wond

  • Record count is double in the Fact tables when compared to Cube data!

    Hello BW Gurus,
    I have 2 question to be answered!
    1. I have a cube which consist of 3 years of data. Due to some bad data in it, I have dropped the cube data completely from fact and dim tables and did an init. from ODS. the load failed due to "No SID found for value '2000000000000000000000010' of characteristic 0MAT_PLANT". I have run a RSRV test to find if there is any inconsistency in SID's for 0MAT_PLANT but everything looks great. Considering the time span in mind to finish the load I have removed that record from PSA and re-pushed the data from PSA which was successful, however I wanted to know if anyone has come across such kind of error.
    2. The load finished successfully in the cube but the performance of the cube was very bad coz my cube request shows only 3.5 million records but when I checked in the fact table it was showing double i.e. 7 million records, which is because I deleted the failed init. request and re-pushed the data from PSA. can anyone suggest me how to overcome this I mean how to bring back my fact table records to 3.5 million?
    please advise me and thanks so much!
    Swathi.

    hi Swathi,
    1. for 0mat_plant no sid, beside rsrv, you can try rsd1, infoobject maintenance, there is menu (about 3rd from left) 'fill sid ...'.
    for infocube update, please make sure you 'delete data',
    'fact and dim...'. check again if fact table counts 0 records then you can update from ods with 'initialize'. or if you go by psa then delete data both infocube and ods (from ods to cube should sufficient).
    2. for performance, check in infocube -> manage -> performance, make sure index and statistic is green. you can create index there, also refresh the statistic.
    hope this helps.

  • How to export the single cube data from SAP repository

    Hi ,
    I have a requirement to export the single cube data ( there was so many cubes in the SAP repository) as an XML file or a .csv file or a flat file.
    And also looking for how to do cube quering?
    Thanks in advance ,
    Ramakrishna Thota

    HI RK,
    1. You can use Open Hub service to export data into CSV or File Format.
    2. You can also use RSCRM_REPORT transaction to export data in to File, for this you need to create query first.
    3. You can also use APD to generate file of your cube data.
    thanks
    Ramesh Babu

  • Role of text & hirarhies of info object property in cube data model & Bex

    Hi,
    Info object have properties : first > attribute can be either display or navigational which are as charatristics(dimension's) display property and as in navigational folder res. in cube > display data model, in display attribute can we see same as like data modle while navigational attribute will serve as charateristics of res dimension. ( in BI 7.0 )
    where is the text and hirirchey property of info object in cube data model and bex analyzer?
    Best regards,
    Dushaynt.

    hi,
    follow this link. it will help.
    http://help.sap.com/saphelp_bw33/helpdata/en/ad/6b023b6069d22ee10000000a11402f/frameset.htm

Maybe you are looking for