BPC 7.1 Administration Client cannot be started

Hi All,
I am trying to start action "manage application sets" on administration client for BPC 7.0 Patch 7 but the client stay invisible.
the last thing that I can see is the client starts to download some files (step 1).
After this it gets invisible, all that I can find is the activ process OSoftAdminMain.exe.
I get no error, nothing.
Last thing that I tested is to execute BPC Client Diagnostic for Administration client features. There I got some errors:
[Files]
  BPC Administration Folder:C:\Programme\BPC\
  File: C:\Programme\BPC\Ev4AdminClient.dll
    Status:File not found
    Reinstall BPC Administration client.
  File: C:\Programme\BPC\Ev4Logon.dll
    Status:File not found
    Reinstall BPC for Office client.
  File: C:\Programme\BPC\Ev4Share.dll
    Status:File not found
    Reinstall BPC for Office client.
  File: C:\Programme\BPC\Ev4AdminForLaunch.xla
    Status:File not found
    Reinstall BPC Administration client.
  File: C:\Programme\BPC\Ev4Admin.xla
    Status:File not found
    Reinstall BPC Administration client.
  File: C:\Programme\BPC\Ev4UpdateAdm.exe
    File Version:7.0.0.107
    Status:OK
  File: C:\Programme\BPC\UnZip32.DLL
    Status:File not found
    Reinstall BPC Administration client.
  File: C:\Programme\BPC\Ev4ResCltAdm.dll
    Status:File not found
The missed files I also cannot find on the application server.
That could be a problem?
Before installing of Patch 7 I could start all action on admin client.
Please help me on this.
Thank you,
Vadim

Hi,
no, unfortunately it does not work.
I reinstalled the BPC client, but it is the same.
The only exception: the client diagnostic tool shows no errors any more::
03.05.2010  10:33:22
Diagnostic forBPC Administration client features.
Your computer is ready to install BPC for Office client features.
[System Information]
Local System Name:XXXX
IP Address:10.1..**
Current User Name:xxxx
  BPCServer Name (IP Address):sapbpc..:8081
Diagnostic Program Version:7.0.0.113
CPU:586
Total Physical Memory:2.097.152 KB
Available Physical Memory:2.097.152 KB
Total Virtual Memory:2.097.024 KB
Available Virtual Memory:1.875.448 KB
Free Disk space (C Drive):179.740 MB
Windows Directory:C:\WINDOWS\
Windows System Directory:C:\WINDOWS\system32\
  Language
    System default language:English
    User default language:GERMAN
Prerequisite software
  Microsoft Windows
    Windows Version:Windows XP
    Windows Build Number:2600
    Windows Service Pack:Service Pack 3
  Internet Explorer Version
    Required:6.0 or higher
    Currently:8.0.6001.18702
    Status:OK
  Microsoft Excel Version
    Required:Excel 2000(9.0) or higher
    Currently:Microsoft Excel 2005
    Status:OK
  Microsoft XML Version
    Required:8.10.8308.0 or higher
    Currently:8.100.1051.0
    Status:OK
  Microsoft .Net Framework Version
    Required:1.1.4322
    Status:OK
End of file
Regards,
Vadim

Similar Messages

  • BI Administration tool cannot be started

    I installed the BI 11g software on Windows XP - When trying to run the BI administration tool, it tries to open, then it closes immediately without givin any errors.

    Hi,
    What XP edition you are running? Do you have SP2 installed?
    Installing Oracle Bi Administration Tool On A Windows7 Client [ID 1179563.1]
    Try to start the same tool from the command prompt and see if you get any errors.
    Thanks,
    Hussein

  • Application cannot be started for WebDynpro Content Administrator

    <b></b>
    Hello Dear Friends,
    It's very Urgebt for me Plz....,
    We are on EP6.0 SP14 and implementing  ESS using WebDynpro for this we uploaded patch ESS & XSS Components
    firsttime in EP6.0 SP9 after we upgraded to SP14 here we faced some problems and undeployed the deployed components ESS&XSS the undeployment is sucessfully done after we are trying to logon into WebDynpro Content Administrator its giving the following Error Messgage.
    <b>
    SAP J2EE Engine/6.40
    503   Service Unavailable
    Application cannot be started.
    Details: 
    com.sap.engine.services.deploy.container.ExceptionInfo: Container metamodelrepository is not active at the moment and it is not possible to startApp sap.com/com.sap.security.core.admin.</b>
    Could u plz help me on this issue..,
    Thanks in advance and waiting for reply...........
    Sreedhar G

    Hi,
    check the status of J2EE engine.
    Check if it works after restarting J2EE engine.
    Regards,
    Ashutosh

  • Remote desktop administrator software failed to start

    I just upgraded to the new ARD client and now I cannot start Remote Desktop Administrator. It says "The Remote Desktop Administrator software failed to start due to an unexpected error. The remote desktop software may not be installed correctly or the computer may require a restart."
    Again, this happened after I install the ARD client update just released by Apple on my MBP 10.5.8.
    I need to get ARD Administrator back up and running. How?

    This is the most feedback I've ever gotten to any post.
    After much trial and error here is the solution I came up with:
    1. follow the instructions in the following link. Most importantly, make sure you follow the instructions on removing the 10.2 clients. I know that's not what we're dealing with here but it is necessary:
    http://support.apple.com/kb/HT2577?viewlocale=en_US
    2. Put the remote desktop Admin app in the trash and empty the trash.
    3. Download and install the ARD 3.2.2 client via the following link:
    http://www.apple.com/downloads/macosx/apple/application_updates/appleremotedeskt op322client.html
    4. Reinstall the remote desktop administrative software in the Applications directory. (Actually, what I did was zip the ARD admin app, then trashed the non-zipped app and emptied the trash, then unzipped my zipped ARD Admin app and made sure the app was in the Applications directory. Didn't need to mess with the CD this way.)
    5. Download and install the ARD Admin 3.3 update. It should now recognize that ARD Admin is installed on the computer and update it.
    6. Try to launch the Admin app. It should work now.
    I believe these are all the steps. After this I ran software update and it said I had no software to update. It looks as though the ARD Admin updater also updates the client software.

  • BPC 7.0 NW Client Install Error

    Hi Expert:
    Now I met some problem in install BPC 7.0 NW Client.
    At the first time, I ask me to provide the XceedZip.dll, however I do not have. So I just cancel the install process.
    Then, I download the lastest version XceedZip.dll and put it into the corresponding folder.
    At the second time, I told me "OSoftDMClientTools.DMTools found in registy.Please refer to administrator before install". I think this is caused by cancelling the install process.
    How should I do to solve this problem?
    Thank you
    Regards,
    Louis Lu

    Hi,
    one way is to manually delete the key in registry. Open the registry table by click start, run then type u201Cregeditu201D
    In the menu Edit, click find then type u201Cosoftaddinu201D
    Then you can delete those keys.
    Then it should be possible to do the client installation again.
    regards,
    Sreedhar

  • Logon of user in client failed when starting a step

    Hi All,
    I have a question. (Might be simple to many).
    <b>Logon of user in client failed when starting a step.</b>
    Some of my scheduled jobs are getting cancelled due to the above error. It has been noted that the user corresponding to that job has been locked.
    Can anybody suggest how to change the user of a Background Job (without deleting and re-creating the same).
    Thanks and Regards
    Devanand

    Hi
    You cannot change the owner of the job once it is in released status.
    Better, create the job with same varient by an existing user and delete the cancelled job.
    regards,
    Vinodh.

  • Windows 7 pro client cannot access folders on server 2003 domain server

    I added a windows 7 64 bit client to a server 2003 32 bit domain 3 weeks ago and file sharing was working fine until today, 5/4/12. Now, when trying to access shared folders that reside on the server,
    I get the following "access denied" message:
    […folder…] is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
    The user name could not be found.
    Strangely enough...
    The windows 7 client
    can open shared folders that reside on the XP clients in the domain
    All the XP clients in the domain can access the server 2003 folders
    All the XP clients and the server 2003 machine can access shared folders and printers on the windows 7 client.
    The windows 7 client can ping the server 2003 machine and vice versa
    I can “see” the server in my network list, but when I click on it, I get the same “access denied” message listed above.
    So... the only problem is that the windows 7 client cannot access folders that reside on the windows server 2003 machine. There must be some sharing setting that got changed
    by a recent windows update.
    Here is what I have done/verified so far on the windows 7 client:
    In advanced sharing settings for Home/Work, Public and Domain profiles:
    network discovery is enabled
    file and print sharing is enabled
    use user accounts and passwords to connect to other computers is selected (I also tried allowing windows to manage homegroup connections instead, but the problem remained.)
    40 -56 bit encryption is enabled
    In “gpedit.msc” Local Policies/Security Settings:
    enabled the following policies:
    Network access: Allow anonymous SID/name translation
    Network access: Let Everyone permissions apply to anonymous users
    disabled the following policies:
    Network access: Restrict anonymous access to Named Pipes and Shares
    Network access: Do not allow anonymous enumeration of SAM accounts
    Network access: Do not allow anonymous enumeration of SAM accounts and shares
    What am I missing? Are there policies on the server that need to be adjusted?
    Please help! My business is crippled if I cannot access server files from this workstation. Thank you in advance.

    As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous
    steps should be helpful for many similar scenarios.  <o:p></o:p>
    If the issue still persists and you want to return to this question, please reply this post directly so we will be notified to follow it up. You
    can also choose to unmark the answer as you wish.  <o:p></o:p>
    In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar
    problems.  <o:p></o:p>
    Thanks!<o:p></o:p>
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • Either there is no default mail client of the current mail client cannot fulfill the messaging request-----error Outlook 2010

    I've tried EVERYTHING suggested in this link (http://blog.timolthof.com/outlook-no-default-mail-client-error/) and everything google and bing and still this message keeps popping up.  Now when I do a windows search for email, I'm not able to view
    the email due to this message.
    For the record, I am running W7 Ultimate x64 and connected via Excange Server.  I do have another system that is running Office 2010 with none of these problems so I don't know if it's related to Exchange though the searches I've done don't allude
    to that.
    What's up?

    Hi,
    I understand that when you tried to open Outlook 2010 beta on the Windows 7 64-bit computer, you encountered the following error:
    "Either there is not default mail client of the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and
    set it as the default mail client."
    You have checked the settings under the registry subkey: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Clients\Mail\Microsoft Outlook
    I understand the inconvenience you have encountered and appreciate the time and effort you spent on this issue. Please be assured that I
    will try my best to help you.
    Now let’s troubleshoot the issue by the suggestions below. Please check the results after each suggestion until the problem is resolved.
    Suggestion 1: manually set Outlook 2010 as the default e-mail client on Windows 7:
    ===================
    1.      
    Click Start.
    2.      
    Type "default programs" in the
    Search box.
    3.      
    Click Default Programs under
    Programs in the search results.
    4.      
    Now click Set your default programs.
    5.      
    Highlight Microsoft Outlook on the left.
    6.      
    Click Set this program as default.
    7.      
    Click OK.
    Suggestion 2: Start the Outlook program in safe mode
    ==============
    1.      
    Click Start, point to All Programs, and then point to
    Microsoft Office.
    2.      
     Press and hold the CTRL key, and then click the Outlook program you want to start.
    If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Outlook program, we can try
    to disable them. Normally, you could do the following to disable the conflict add-ins in your Outlook program:
    Disable add-ins
    Click
    File menu, click Options > 
    Add-in, click Go button in the Manage:
    Com-in Add.
    Check if there are any add-ins,
    clear the checkbox to disable them.
    Close the Office program and
    restart it.
    Add one check back each time to the list of Add-In,
    restart the Office program, and repeat the above procedure. Once the issue reappears again, we can determine which add-in causes this problem and then disable it.
    Suggestion 3: Test the issue with a new Windows user account
    ==============
    We can follow the steps in the articles to create a new user account to test the issue. If the problem does not occur in the new user account, some settings
    in the old account are corrupted. We can copy the main user files from the old account to the new account, delete the old account, and then continue using the new account.
    For the detailed steps on how to create a new user account and copy data from the old account to the new account, you can refer to the following articles:
    For Windows Vista/Windows 7:
    http://windows.microsoft.com/en-us/windows-vista/Create-a-user-account
    http://windows.microsoft.com/en-us/windows-vista/Fix-a-corrupted-user-profile
    Please take your time to try the suggestions and let me know the results at your earliest convenience. . If anything is unclear or if there
    is anything I can do for you, please feel free to let me know.
    Sally Tang

  • Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run ...

    Lync 2013 generates repeated messages stating “Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mail client.”. Events that
    seem to generate messages is disconnecting and re-connecting to a network but it also happens randomly and the messages will stack up during a working day. Everything seem to work OK but it is an annoyance.  The computer is upgraded (uninstalled first)
    from Office 2013 ProPlus to Office 365 ProPlus. Outlook (Desktop) is default mail client. 64-bit Windows 8.1 Enterprise, 64-bit Office (both before upgrade and after).  
    (Links removed to remediations I've tried)
    Made no difference what so ever and the messages continue. What's next? 
    I posted the above to the Office 2013 forum (unfortunately I'm not allowed yet to post a link to that posting) but due to the fact that the computer affected by this is a networked domain computer I've been redirected to this group instead.  I
    was asked some additional questions ing the other forum regarding the problem: 
    Are you able to send mails from other applications like Word or Excel?
    NO
    Is the PC connected to any Domain/Server? YES
    Is this an issue with one PC only. NO - affects all computers that once had Office 2013 Pro Plus installed and now has Office 365 Pro Plus (Originally I posted this question in the Office 365 community but was directed to first the Office
    2013 forum and now this forum)
    Right click on any file and Click on Send to-> Mail Recipient and check if you are able to send mails using Outlook.
    NO
    Also check if the Lync add-in is enabled in Outlook.
    Start Outlook
    Click the File tab.
    Go to Options.
    Click Add-ins.
    Check if the Lync add-in is enabled. YES
    My last posting in the other forum contained the following additional information regarding our problem: 
    As far as we can see installing 32-bit Office 365 Pro Plus using click to run makes no difference. 
    We do not send any mails from Lync, Lync is however the process that generates the message most frequently (as Lync seem to react upon network events).
    Other processes that have Outlook plugins may also be the parent of the message popup (third party applications). 
    Yes the Lync add-in is enabled. Lync functionality in/from Outlook seem unaffected. 
    It is not possible to send emails from other applications (explorer, word, excel etc.) ie. right clicking and send to generates the messages and
    a follow up error message concerning lack of MAPI enabled e-mail. 

    Hi,
    I'm marking the reply as answer as there has been no update for a couple of days.
    If you come back to find it doesn't work for you, please reply to us and unmark the answer.
    Best Regards,
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • New 2012 R2 domain - xp clients cannot join or print

    I just migrated a 2003  domain to 2012 R2.   Things were working ok & then XP clients became AD stupid.
    Steps I took:
    Added a VM 2012 R2 DC to the domain.  Server had DNS installed.  Ran dcdiag & bpa and resolved any issues. 
    About a week later I moved all roles over to the VM DC.
    Tore down one of the NT2003 DCs (not VM) and rebuit it as a 2012 R2 DC w/DNS.  Ran dcdiag & bpa and resolved any issues.   Had problems with DNS scavenging removing some static records.  readded records & made sure the  "Delete
    record when it becomes stale" was unchecked on all static records (all fwd & rev zones).
    Moved all roles from the VM DC to the hardware DC.
    After a week I tore down the 2nd (& last) nt2003 DC (not VM) and rebuilt it as a 2012 R2 DC w/DNS.  Ran dcdiag/bpa and fixed any issues.  Also ran it on the other DCs.
    Removed the VM 2012 R2 DC from the domain (demote, remove features, remove from domain, power off, delete VM).
    Everything seems to be working fine.  dcdiags look clean, event logs seem good.
    Bump forest/domain to 2012 R2 native.
    Then, a few days later,  it goes bad.  I (after hours) install all accumulated updates on both DCs.  Reboot both.
    Next AM a user calls.  Her thin client cannot connect to the terminal services server.  DNS has deleted its dns record, even though the delete when stale was unchecked.  :|  So I readd the static record and turn off scavenging. 
    Problem solved.
    Next call s from a XP user (we have XP, Win 7, and thin clients).  She cannot print.  Printers show "cannot connect".  Try various things to no avail.  Check Win 7 boxes and they're working fine & printers are connected. 
    Note that the XP & Win7 boxes all pull their DHCP address from the same dhcp server/scope.
    Review error logs and run dcdiag.  There are several somewhat esoteric errors.  After several hours or tail chasing I decide to take a more scorched earth tack.  I demote the 2nd DC and remove AD & DNS from it. After demotion and role
    removal I check AD and it still shows the DC.  I remove the now just a server from the domain.  Clean up DNS & AD removing all traces.  This takes a while as I have to run variuos scripts (tahnk you google) to ensure AD is clean.
    Run dcdiag and resolve issues.  Even a detailed dcdiag comes out clean.  Replication tests show the old server is now forgotten.
    Check XP boxes and they still show printers as "cannot connect".
    Remove a XP PC from the domain.  Try to rejoin and I get a error.  Rename it and still get the error.  I can ping, nslookup, etc and they return the correct IP.
    I've tried the simple change the join a domain in system properties.  That gives a somewht non descript error.  The network identification wizard seemed to find the domain but didn't work.  As it was trying to find the PC in AD, I went ahead
    and added it via AD users& Computer console.  Run the wizard and it tells me it found the record in AD.  It then says "a domain controller for the domain [ourdomain] could not be contacted."  !?  Yet the prior screen it told
    me it had found the record for the PC on the DC.
    nslookup for ourdomain.local as well as dcname.ourdomain.local resolve correctly.  Tried chenging the PC to static - no change.  Rename the old win 2012 R2 dc (now just a server outside the domain), reboot, and the try to rejoin the domain. 
    Works flawlessly.
    BTW - We're running tcpip w/o netbios over tcpip.
    So basically my XP boxes cannot use AD printers and cannot join the domain.  IDK if they're picking up gp updates (I'll check in the AM), but I suspect they're not.
    Short of buying a truckload of Win 7 licenses and reloading OSs, what can I do to fix this?
    Details on the XP box error (fyi - I did a record to record comparison to a Win 2008 domain's SRV records and they look identical (except, fo course, the domain& server names)) :
    The domain name [ourdomain] might be a NetBIOS domain name.  If this is the case, verify that the domain name is properly registered with WINS.
    If you are certain that the name is not a NetBIOS domain name, then the following information can help you troubleshoot your DNS configuration.
    The following error occurred when DNS was queried for the service location (SRV) resource record used to locate a domain controller for domain [ourdomain]:
    The error was: "DNS name does not exist."
    (error code 0x0000232B RCODE_NAME_ERROR)
    The query was for the SRV record for _ldap._tcp.dc._msdcs.[ourdomain]
    Common causes of this error include the following:
    - The DNS SRV record is not registered in DNS.
    - One or more of the following zones do not include delegation to its child zone:
    [ourdomain]
    . (the root zone)
    For information about correcting this problem, click Help.
    dcdiag /test:dns results
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = Domctl1
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\DOMCTL1
          Starting test: Connectivity
             ......................... DOMCTL1 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\DOMCTL1
          Starting test: DNS
             DNS Tests are running and not hung. Please wait a few minutes...
             ......................... DOMCTL1 passed test DNS
       Running partition tests on : DomainDnsZones
       Running partition tests on : ForestDnsZones
       Running partition tests on : Schema
       Running partition tests on : Configuration
       Running partition tests on : [ourdomain]
       Running enterprise tests on : [ourdomain].local
          Starting test: DNS
             Test results for domain controllers:
                DC: Domctl1.[ourdomain].local
                Domain: [ourdomain].local
                   TEST: Dynamic update (Dyn)
                      Warning: Failed to delete the test record dcdiag-test-record in zone [ourdomain].local
                   Domctl1                      PASS PASS PASS PASS WARN PASS n/a
             ......................... [ourdomain].local passed test DNS

    I see the following errors:
    "TCP/IP failed to establish an outgoing connection because the selected local endpoint was recently used to connect to the same remote endpoint. This error typically occurs when outgoing
    connections are opened and closed at a high rate, causing all available local ports to be used and forcing TCP/IP to reuse a local port for an outgoing connection. To minimize the risk of data corruption, the TCP/IP standard requires a minimum time period
    to elapse between successive connections from a given local endpoint to a given remote endpoint."
    Please read that: http://social.technet.microsoft.com/Forums/windowsserver/en-US/d770e9fd-53a2-4ae9-99b3-2754c4564592/tcpip-connection-issue-on-windows-server-2008-sp2?forum=winserverPN
    "DCOM was unable to communicate with the computer 8.8.8.8 using any of the configured protocols; requested by PID      b70 (C:\Windows\system32\dcdiag.exe)."
    As you can see, it is pointing to 8.8.8.8. You need to make sure that public DNS servers are configured as forwarders and not in IP setting of your DCs. Better if you could use your ISP DNS servers as public ones instead of 8.8.8.8.
    Please read this Wiki article for recommendations about IP settings: http://social.technet.microsoft.com/wiki/contents/articles/18513.active-directory-replication-issues-basic-troubleshooting-steps-single-ad-domain-in-a-single-ad-forest.aspx
    "               TEST: Dynamic update (Dyn)
                      Test record dcdiag-test-record added successfully in zone [ourdomain].local
                      Warning: Failed to delete the test record dcdiag-test-record in zone [ourdomain].local
                      [Error details: 9505 (Type: Win32 - Description: Unsecured DNS packet.)]
    Here, you need to make sure that only secure DNS updates are allowed if you would like to secure dynamic updates. This is detailed in here:http://social.technet.microsoft.com/wiki/contents/articles/21984.how-to-secure-dns-updates-on-microsoft-dns-servers.aspx
    This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
    Get Active Directory User Last Logon
    Create an Active Directory test domain similar to the production one
    Management of test accounts in an Active Directory production domain - Part I
    Management of test accounts in an Active Directory production domain - Part II
    Management of test accounts in an Active Directory production domain - Part III
    Reset Active Directory user password

  • Trying to install iCloud on Win7 get error message either no default mail client or current mail client cannot fulfill messaging request.   How fix?

    Trying to install iCloud on Win7 get error message either no default mail client or current mail client cannot fulfill messaging request.   How fix?

    Outlook 2013.  Under Start Up Options, I have checked "Make Outlook the default program for E-mail, Contacts, and Calendar".

  • Either there is no default mail client or the current mail client cannot fulfill the messaging request" error message when you send e-mail from Office 2010 in Outlook

    Hi,
    If save and send as attachment used in MS Office 2010 then outlook 2010 displays error "Either
    there is no default mail client of the current mail client cannot fulfill the messaging request-----error Outlook 2010"
    Windows 7 32 bit Enterprise edition and Offoce Professional plus 2010 32 bit is installed in the machine.
    I have followed the below troubleshooting steps but still getting the same error.
    Method 1:
    Followed the  Microsoft fix
    http://support.microsoft.com/kb/813745
    1. On the Windows taskbar, click
    Start > Run.
    2. In the Open box, type the following text:
    3. regedit
    4. Press Enter.
    5. Go to the following registry key:
    6. HKEY_LOCAL_MACHINE\SOFTWARE\Clients\Mail
    7. In the right pane, right-click
    the following registry value:
    8. PreFirstRun
    9. Click Delete
    10. Click Start, and then click Run.
    11. In the Open box, type regedit, and then pressENTER.
    12. InRegistry Editor, locate the followingsubkey in the registry:
    13. HKEY_LOCAL_MACHINE\Software\Clients\Mail\Microsoft Outlook
    14. Select thesubkey, and then pressDELETE.
    15. Click
    Yes.
    Method 2:
    Repaired Office
    Method 3:
    fixmapi.exe. Mapi32.dll
    Method 4:
    Created the below registry key HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Offlce\15.0\Outlook
    Create the following String value if it does not exist: Bitness Set the String value for Bitness to the following if it is not already set to x86
    Method 5:
    Compared the installed applications
    Uninstalled the below program :Microsfot Visuall C++ 2008 Redistributable - x86 - KB2467175" and installed "Microsfot Visuall C++ 2008 Redistributable - x86  - 9.0.21022"
    Please help to solve the issue.
    Regards,
    Boopathi S

    Hi,
    Do you mean Send as Attachment button under File>Save & Send>Sending Using E-mail
    in Office applications, like Excel or Word?
    Is this an issue that come up recently? Have you ever made any changes to your system?
    If you have installed multiple e-mail programs on the same computer, please try to make Outlook the default mail client and then try again:
    http://office.microsoft.com/en-us/outlook-help/make-outlook-the-default-program-for-email-messages-contacts-and-calendar-HP010355552.aspx
    http://support.microsoft.com/kb/223877
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • The Remote Desktop administrator software failed to start due to an unexpected error...

    Hi all...
    Suddenly, I'm getting this error message when I try to open ARD. It was working a week ago and I'm not aware of changing anything. Any advice?
    This is the 3.6.1 version of the ARD admin and I have the 3.6.2 Client installed (that was the way it was before, too, when it was working).
    Note: I did try a fix from the forums that was posted in 2009, which required deleting the ARDAgent from the RemoteManagement folder in System/Core Services... and then reinstalling again using the Apple ARD Admin download for same. It worked for one run of the program, then the error came back.
    What do you guys think?

    bcvanbelle wrote:
    Updated from 10.5.1 to 10.5.2. System seemed slow at first, noticeable keyboard lag and otherwise sluggish. Noticed that Remote Desktop no longer worked. Installed Graphics update. No more typing lag and speedier performance. Remote Desktop still dead.
    Error message:
    The Remote Desktop Administrator software failed to start due an unexpected error.
    Hmphf.
    You may have to reinstall the Remote Desktop SW. See if that helps.
    I don't think it's a coincidence that this update "fixed" the Remote Desktop SUID warning, and it also removed the potential update from my computer which I had placed on "Ignore" since I did not need it and did not need the warning, either. So there is a connection between this update and the Remote Desktop SW.

  • Administration client port

    Hi all!!
    What port does the administration client use to connect the server?
    thx to all
    Giovanni

    If you have Domain1 where you have the BPC server and Domain2 where some users needs access then you need the follow rights between domains:
    1. Domain2 must be able to access servers from Domain1
    2. Installation user for BPC from Domain1 must be able to browse the users from Domain2
    If you have trust relationship between domains then these two conditions are fine.
    If not then you have to check the two points mentioned before.
    Regards
    Sorin Radulescu

  • SAP BPC 10.0 Web Client Blank Screen after login

    Hi ALL,
    We are using SAP BPC 10.0 Web Client with Adobe Flash Player 13.0.0.214 with IE 9.0 on Windows 7.0.
    We face strange error where on only on certain PC, the BPC web client working.. On other getting Blank/Blank Screen after login (with "movie not loaded" on the adobe flash player).. Both PCs are having the same setting.
    Even one of PC which previously working, starting this week suddenly getting the same error.. I have created OSS message and got feedback with also share this problem on this forum.
    I have done several actions as mentioned on several SAP notes )1624267, 1664889, 1681147, 1694871, 1752971, 1798336, 1804221, 1806371, 1811218, 1820505, 1918631, 1968584), but still no luck..
    If you have the same issue, kindly share..
    Thanks and regards,
    Hery

    Yes .. Compatibility View also checked.. in several PCs, it is working well. both failed and working PCs have the same setting.
    Just found another weird: in one working PC, 2 different windows local-admin users login to the same PC for BPC-web and getting different result (1 Ok ; 1 failed) ..seems it is related with the user profile and login-domain servers (we have multiple login-domain servers with load balancing mechanism).
    Thanks and regards,
    Hery

Maybe you are looking for