BPEL 10g console - Activities tab
Hi
The activities tab in the BPEL 10g console has a column called Due and this column has the value of 'no date' for most of the faulted instances and for some instances it has the date timestamp of the when the instance faulted.
My query is, Is this column populated based on
i) the type of fault
ii) the type of the bpel process itself ( sync/async)
iii) the action specified in the fault policy.
Also we are currently on 10.1.3.4.0 and noticed there is no 'Created' column in the Activities tab which shows the creation date.
Please can someone shed some light on missing dates in the 'due' column and the why the 'created' column is missing and is there any simple way to add any columns to the Activities tab.
Thanks
Ash
There are post installation steps for the upgrade to 10.1.3.3 from 10.1.3.0, these steps create few new tables. These steps are documented in the readme.html available with the patch download.
See the section Section 6.2, "Run Upgrade Script on Patched Oracle Application Server 10g Release 3 (10.1.3.1.0)".
These scripts create some new tables, the problem you are facing is because of these steps not being executed.
Sash
http://tech-sash.blogspot.com
Similar Messages
-
Automatic resubmission of BPEL process in activities tab
Hi ,
As part of exception handling solution , when there is a PL error we have configured the fault policy to send the BPEL to activities tab.
In some situations there can be hundreds of BPEL process entering the activities tab. Is there an API or means to resubmit them automatically rather than doing it manualy?
ThanksHi Vikas,
try with the UDML, you can copy and paste all the element object inside the Presentation Layer and paste in a text file like this, this is the UDML script to create a column inside the Presentation Layer:
DECLARE FOLDER ATTRIBUTE "Subject Area".."- Client"."Client" AS "Client" UPGRADE ID 2150873025 LOGICAL ATTRIBUTE "Business Model"."Client"."Client"
*DESCRIPTION {My client description}*
PRIVILEGES ( READ);
As you can see in the script the DESCRITPION. So if you write the descritpion for all you object and write the script inside a txt file (script.txt), then you can run this command to apply the change (in your case the DESCRIPTION) ath the Repository.
<OBIEE_HOME>\OracleBI\Server\bin\nQUDMLExec.exe -UAdministrator -P Administrator -I script.txt -B original_rpd.rpd -O modified_rpd.rpd
Probably you have to build a system to automate the generation of the UDML script.
I hope it helps.
Regards,
Gianluca -
To Retry activities that failed and are shown in Activities tab
I have a custom fault management policy defined and whenever I encounter an error in a BPEL process, it gets displayed in the "Activities" tab. Now, only an "admin" user can select one instance and "retry" it. However, I want the non-admin users to be able to do it. Is there a way to achieve this functionality?
Hi
Please check the following setting once again in spro > sales and distribution > baisc function > partner determination > For customer master
1. check for partner determination procedure AG , if you have created a new one then please check whether it is there in the list.
2.Select the AG and then check for whether the partner function has been made mandatory in the procedure or not.
tick mark SP, BP,SH,PY , since Sold to party should not be allowed to change so mark it as Not Modifable
3. partner determination procedure assingment for the account group. AG should be assinged to your account group
4. Account Group Function assingment - Make sure your all the partner function SP,BP.PY.SH has been assinged to the Account group here.
Thanks
RB -
Some questions regarding BPEL 10g to 11g migration.
Hi All
I have the following queries,
1.Is it mandatory to load xsd's , wsdl's , XREF , DVM into MDS ? or is it allright to keep them in file system ? currently we have a number of xsd's and wsdl's inside each of our 10g project > bpel subfolder. If they need to be deployed to MDS , then which files in 11g will need to be modified to use the new 'oramds:/apps/..... ' reference ?
do they get automatically loaded into MDS when a Composite is deployed on WLS or do they have to be deployed separately using ant-sca-deploy?
2. Should we modify fault-bindings.xml , DefaultPolicy.xml before or after upgrading the 10g project ? I understand that their references in composite.xml also need changing.
3.
a.Is it mandatory to modify the 10g dbadapter.rar contents (convert oc4j-ra.xml to weblogic-ra.xml ) and deploy the rar on 11g ?
b.or can we manually create data sources,outbound connection pools> jndi factories etc and redeploy the dbadapter on 11g so that its weblogic-ra.xml gets updated with the data sources,jndi that we manually created ?
want to know if 'a' and 'b' do the same thing ,so mutually exclusive OR both need to be done .
same question for JMSAdapter.rar, aqadapter.rar
4. When upgrading BPEL 10g to 11g using Jdeveloper, should all the data sources used by the project be created on Jdeveloper ?
5. Is it necessary to copy properties from 10g domain.xml t0 11g bpel-config.xml,soa-infra-config.xml ?
6. Should external webservices used by BPEL be up and running , while upgrading from 10g to 11g in jdeveloper , OR only during deployment to wls? if they are needed during upgrading how to link to them from jdeveloper ?
7. Do BPEL 11g projects needs to be deployed on WLS only as a SAR or are any other formats allowed ?
Thanks in anticipationHi,
Please find the links where you can find the most of the answers for your questions.
http://www.slideshare.net/oracle_imc_team/oracle-soa-suite-upgrade-10g-to-11g
Oracle soa 10g to 11g migration
Thaknks -
Connect MQ V6.0 from MQ adapter over SSL in BPEL 10g
Hi All,
I'm trying to connect to a remote MQ using MQ Adapter from my BPEL(10g) process. I'm able to deploy the process successfully after adding the jars file in server.xml.
My process is a poller one it just dequeue the message upon any message arrival.
But its not picking up the message in spite of having numerous message in queue,in log its showing ,
Failed to create QueueManager.
+[ManagedConnectionImpl] Error while creating QueueManager: "MQW1". [Caused by: CC=2;RC=2397;AMQ9641: Remote CipherSpec error for channel 'JAVA.BSS_VSS.CLIENT'. [3=JAVA.BSS_VSS.CLIENT]]+
Refer WebSphere MQ Reference Manual for Reason Code 2,397 and fix the cause of the error. Contact oracle support if error is not fixable.
+[Caused by: CC=2;RC=2397;AMQ9641: *Remote CipherSpec error for channel* 'JAVA.BSS_VSS.CLIENT'. [3=JAVA.BSS_VSS.CLIENT]]+
+; nested exception is:+
+ ORABPEL-12511+
I've got the SSL Cipher suite =SSL_RSA_WITH_3DES_EDE_CBC_SHA from client but don't know where to set that property.
Would anyone let me know the procedures of invoking MQ over SSL in BPEL 10g.
Thanks in Advance,
ShreekantaI'm looking for exact property need to be set for SSL in Oracle MQ adapter.
It would be very helpful if Oracle have some standard docs. -
Regarding process activities tab in GP
Hi all,
Iam creating a GP process by using callable as portal iview when i am initiating the process iam able to call the respective object but in the iview it is showing the procees activities tab .Is there any way to customize it if so please help me with the solution .
Edited by: vamsi krishna on Jun 17, 2008 10:49 AMHi Vamsi,
Your issue can be solved in NW CE EHP1 where you can hide virtually all panels at the runtime.
If you are using NW 7.0 , you can use the SingleTaskUI, which can be accessed through a URL taken from the GP API.
In the GP API, the class GPActionInstance has the method generateNavigationTargetForSingleTaskUI, which generates a String URL that you can use to navigate to the Single Task of the current action. The Single Task UI view shows only the Content part of the GP Runtime (only the action UI).
Hope this will work....award if useful. -
Oracle SOA B2B 10g Console Issue
Hi All,
I'm trying to create a Business Action in Oracle SOA B2B 10g Console but getting below error, please suggest.
Error
An error occured when creating the business action
Erroe -: AIP-11052: Writing following objects: Document Type failed due to following constraint violation:
DOCUMENTTPE. CAN NOT UPDATE UNVERSIONABLE OBJECT IN A VALIDATED CONFIGURATION
Using Custom Document over Generic exchange protocol to create a business action.
Note: Tried by bouncing server once, even though getting same error.
Regards,
Jagadesh.Jagadesh,
Oracle 10g version is very old release of Oracle B2B. In the 11g or 12c release, it has been enhanced with many features, optimised, integrated with SOA and it is very easy to use.
Hence it is highly advised to install the later version of 11g or 12c.
This link might help you - https://blogs.oracle.com/oracleb2bgurus/entry/what_it_takes_to_migrate_an_ex
Incase if there is any issue in production environment of 10g, you might not get the support if you file any SR.
Regards, -
Perform XOR operation in BPEL 10g
How can we perform bitwise xor operation in transformations in BPEL 10g.
As a part of requirement, i need to add xor operation.
Can anyone help on this.
Thanks
PhaniHow can we perform bitwise xor operation in transformations in BPEL 10g.
As a part of requirement, i need to add xor operation.
Can anyone help on this.
Thanks
Phani -
Dehydration - BPEL 10g vs BPEL 11g
Hi,
Could you please share information around differences in Dehydration Mechanism in BPEL 10g and BPEL 11g (wrt to functioning, schema, and other imp parameters)?
Thanks & Regards,
chaitanyaI will answer my question. I killed the migrating Java process and the migrating wizard will report failure of migrating the .jpr file. Actually, the only thing missing in the migrated .jpr file is deployment profile which I can generate from deployment menu. And I can deploy the migrated process. This works as a workaround.
-
Invoke BPEL 10g process by Java client code deployed in WebLogic 10.3.3
Hi,
I have a problem with the use of JNDI factory While invoking BPEL 10g process using client code deployed in WebLogic 10.3.3.
Should it be "com.evermind.server.rmi.RMIInitialContextFactory" or "weblogic.jndi.WLInitialContextFactory"?
(Should the JNDI factory follows the container of BPEL server or the container of client code?)BPEL server from SOA Suite (10.1.3.3.1)
Client code which invokes the BPEL process deployed in WebLogic 10.3.3 -
My portlist.ini file has the following entries
$ cat portlist.ini
iSQL*Plus HTTP port number =5560
Enterprise Manager Console HTTP Port (CSI01DRW) = 5500
Enterprise Manager Agent Port (CSI01DRW) = 1830
Enterprise Manager Console HTTP Port (CSI01DRW) = 5500
Enterprise Manager Agent Port (CSI01DRW) = 1830
but I am not able to access my OEM 10g console from the web browser.
My OS is SunOS 5.10
Does any one have any solutions for this problem.Check to make sure if dbconsole is running
emctl status dbconsole -
Sensor logs on BPEL Console Sensor tab
Hi
I have BAM Sensrs in BPEL process at various activities. The data is published to BAM DO. How to check the logs, payload any details related . The sensor tabl in the BPEL COnsole...Does that show any details....bcoz I dont see anything there....
Guide where to look the excuted sensors payload and whether it executed succefully or errored out..
The only place where I go and look now is domain.log in BPEL and BAm Server log.This is a known bug.
I think it is resolved in SP3.
Regards
Ingo -
Bpel control console opens very slow (10.1.3.4)
Hi
I have Oracle SOA Suite 10.13.4 (+ MLR #7 patch) installed at HP-UX itanium server. From the past two days, bpel console takes too much time open on almost every page. Few days before this problem started i had changed the JVM settings by increasing the count to 2 (from em cosole) for improving performance, but that made bpel console very slow. So i decided to revert back the JVM settings and made JJVM to 1 again for oc4j_soa and then restarted the server. Bt even now the bpel cosnsole takes ages to open (almost a minute) for every page of console.
The AS control cosole and web service manager console works fine and this issue is with bpel console only.
There is no load on server at present.
Please let me know how i can trace out the root cause for this issue. Is there any way i can increase logging level for the bpel console application and where i can view that log ?
Thanks.Please ask your DBA to check how ur Dehydration repository is behaving. Worth checking ORABPEL and ORAESB schemas.
To me, you might need to purge instances and related data. But please check with DBA first.
Also, while opening BPEL Console, monitor Memory/CPU on Application server and DB server.
They may give some hint.
You can also use tool like JRMC, JUnit etc to see the JVM usage.
regds,
www.ibiztrack.com -
Open project Activities tab by direct URL in P6 8.1 Web Access
Hello!
I'm trying to access project workspace in P6 Web Access v 8.1 by direct URL from another HTTP resource.
But P6 redirects me to another dialog (for choosing project from the list) if project is not opened before by clicking command Open from menu.
Does anyone know how to prevent the opening of a project selection dialog and go directly to the page of the project activities?
Now im using this format of URL:
http://primavera:7777/p6/action/pm/activities?projectId=1000&wbsId=20000&ProjectName=null&checkTabs=trueI face similar issue and as work around i copied the user profile and created new user.
It works fine with new user profile.
I think it happens sometimes we check new tab before loading previous one and because of that user profile get corrupt. -
Handling multiple database with 10g CONSOLE
Hello list,
How do we handle multiple databases with 10g Enterprise Console?
We are running Oracle 10.1.0.2.0 on Windows 2003 server. I have one database setup but I need to install more databases and am having difficulty accessing and managing the second database. thanks for your input.may be you can try the following:
1) create a file named new_target.xml with the following:
<Target TYPE="oracle_database" NAME="DBAPV9.WORLD" DISPLAY_NAME="DBAPV9">
<Property NAME="OracleHome" VALUE="/opt/oracle/app/oraadm9i/product/9.2.0.4"/>
<Property NAME="UserName" VALUE="sys" ENCRYPTED="FALSE"/>
<Property NAME="password" VALUE="thepassword" ENCRYPTED="FALSE"/>
<Property NAME="Role" VALUE="sysdba"/>
<Property NAME="MachineName" VALUE="machine.domain"/>
<Property NAME="Port" VALUE="1521"/>
<Property NAME="SID" VALUE="DBAPV9"/>
</Target>
replace as appropriate
2) Execute emctl config agent addtarget new_target.xml
3) Execute emctl stop dbconsole
4) Execute emctl start dbconsole
Maybe you are looking for
-
I am using a 4s with ios 7.1.2 and recently any app I am trying to use or load will not work and I get error message the app is not compatible with my iPhone; however, the requirements in every case indicate they are compatible with 4s and ios 6 and
-
Vendor Database - Need Transaction code
Hi All, Last week i have posted a query with regard to pulling the Vendor Database (Need : Vendor Code / Description/ Address 1/ Postal Code / Payment Type ) Few experts have suggested me to use S_ALR_87012086 T-Code, however the problem is we dont h
-
Time changes made in iPhoto not showing in Photos
I've scanned a lot of physical family photos from when I was a child into iPhoto and changed the dates so they show in iPhoto on the correct day. So Xmas day 2000 showed up on 25 December 2000 as you would expect. Since importing into the new Ph
-
CLASSIC don't works as under 10.3.9!
I have made a new install of Mac OS 9.2.2 and 10.4.5 on two seperate partitions onto my G4 AGP Graphics("Sawtooth") with 466 MHz and HD 20 GB. After I started Classic it seems to start like every time, but at the end of the starting process nothing h
-
Does anyone have any info on MacKeeper?
Hi, I was prompted to install MacKeeper prior to shutting down last night, but now I'm questioning if this is actually an "Apple" program or is someone trying to phish my system? Does anyone have any information on this? Thank you!