[BPELConsole] How to use "Retry / Abort / Rethrow / Replay / ... " actions?

Hi !
In my BPELConsole, in the "Activities" tab, I have a list with all my instances.
Bellow the list, I have an "action" list :
Retry / Abort / Rethrow / Replay / Continue
!http://www.monsterup.com/upload/1246883167511.png!
The problem is, I don't know how to select an item from the list !
When I click on "select all", nothing is selected, even if I have "failed" or "waiting" items.
I never see checkboxes or something like that...
Can anybody tell me what I've done wrong ?
How can I have a scenario replayed ?
Is there something to add in my BPEL file ?
Thank you in advance.

This is part of the fault handling framework. You can choose actions when a message ends up in the recovery area or fault handling framework. It is too much to explain here, I point to the documentation:
http://www.oracle.com/technology/products/ias/bpel/pdf/10133technotes.pdf
Marc

Similar Messages

How to use a back button in action pages?

Hi all,
I have created a user login page,home page and user profile page.
If the user provide correct username and password in the login page he will be taken to home page.
In the home page he will be having his username and a link to view his profile.
When the user click on the link "My Profile(user profile)" he wil be taken to that page.
In my profile page the user can edit only his firstname,lastname and password .
On the user profile page i have placed a Back Button(using javascript: on onclick event i have used history.back()) to go back to home page after editing his profile.
If the user edit his profile for n-number of times then atlast if he wants to go back to home page-then he wil cilck the back button.
Now the problem occurs like the back button not going to home page and it simply going back with the edited history.
How to use a back button in action pages; without repeating the actions done on the page; how to redirect to the users home page?
I simply used the hyperlink in userprofile page to go to home page but when i click onit it is displaying blank home page.
I'm using hibernate orm mapping; cflogin and cflogout tags.
Any help appreciated,
Chandru P

chandrup wrote:
Hi Dan,
Dan Bracuk wrote:
Use an anchor tag.
I simply used the hyperlink(<a href="home.cfm">Home</a>) in userprofile page to go to home page but when i click onit it is displaying blank home page.
I can see your problem. You may use javascript:history.go(-1), javascript:history.go(-2), ..., to go back one page, two pages, and so on. But how does one go back an arbitrary n pages? The link href="home.cfm" isn't a good solution for the browser. It makes a new call to the server which, as you may have discovered, can overwrite all the changes made at the browser.
You should use the Javascript variable history.length. If you open n links in succession, starting from page0.cfm, then the browser holds the value of history.length as n. So, experiment with something like
<a href="javascript:history.go(-history.length)">Go home</a>
or
<a href="javascript:history.go(-history.length+1)">Go home</a>

How to use the cases in button action?

Hi Experts,
I want to get a prompt message if the field is empty.I got it but at the same time if the field is filled I want the other action to be performed that is to call a BAPI and give me output.How can I give two events for the same action.
How to use the cases in button action?
So, please guide me.Urgent need
Regards
Nutan

Hi Nutan,
if I understand you, then you have a simple validation. Therefore you can use the validation functionality of VC for your components. An alternative could be by writing a new ABAP RFC function module like:
BAPI Input parameters as input and BAPI output parameters as output and an additional return code or string for a message:
IF I_FIELD IS INITIAL.
E_RETURN_CODE = "THE FIELD IS EMPTY."
ELSE.
CALL FUNCTION <YOUR_BAPI>
<BAPI PARAMETERS>
ENDIF.
I hope that helps.
Best Regards,
Marcel

How to use fscommand or equivilant in action script 3

Hello every one,
I am new to action script 3, I want to burn my flash
projector file on a CD so that when it plays it opens in full
screen mode with movie size set to 100% and no scaling allowed. I
use to do it with FScommand in previous versions but it doesn't
work in flashcs3. Can someone help this poor soul how to use it in
actionscript3.
Thanks in advance.

do a search for fscommand in the Flash CS3 help and look for
a file heading called AS2.0 Migration Once you find that file, do a
search for fscommand again inside the document.

How to use Javascript to invoke an action?

Hi,
Normally if I want to invoke a controller's action with a submit button I can use the action="#{MyController.method}" part of my JSF h:commandButton. But if I'm submitting a form through Javascript,
document.getElementById("myForm").submit();
how do I cause the same action to be run on the server side?
Hope this question makes sense. Thanks, - Dave

This is the way I do it it works for aj4:commandLink
Here is my commandLink
<a4j:commandLink>
style="display:none"
accesskey="C" action="#{manageCenter.cancel}" id="cancel_cmd" reRender="manageCenter" value="#{msg.button_CANCEL}"
oncomplete="submitOurForm()"
>
</a4j:commandLink>And Here is the Javascript function to fire the event
      * Crossbrowser function to simulate click event on a component
        fireEventClick:function(elem){
              if(typeof(elem) == "string"){
                      elem = document.getElementById ( elem );
              if(null == elem){
                   console.info("fireEventClick:Passed element is null");
                  return;
             if(document.createEvent){
                 var e = document.createEvent('MouseEvents');
                 e.initMouseEvent('click', /* Event type */
                 true, /* Can bubble */
                 true, /* Cancelable */
                 document.defaultView, /* View */
                 1, /* Mouse clicks */
                 0, /* Screen x */
                 0, /* Screen y */
                 0, /* Client x */
                 0, /* Client y */
                 false, /* Ctrl */
                 false, /* Alt */
                 false, /* Shift */
                 false, /* Meta */
                 0, /* Button */
                 null); /* Related target */
                 elem.dispatchEvent(e);
              }else{//IE Specific
                 elem.click();
          }So now from javascript we can simply fire the action like so and when it return we can fire our submit
fireEventClick("cancel_cmd");Hope this helps

How to use default cftree icons in action script?

How do you reference the default cftree node icons from an
action script? I found this information in the flex documentation
but I can't figure out how to reference the icons from my
<cfformitem type="script">. Is this possible?
http://www.flex2doc.com/projects/framework/asdoc/mx/controls/Tree.html
defaultLeafIcon="TreeNodeIcon in assets.swf"
disclosureOpenIcon="TreeDisclosureOpen in assets.swf"
folderClosedIcon="TreeFolderClosed in assets.swf"
folderOpenIcon="TreeFolderOpen in assets.swf"

CROSS-POSTED to: ColdFusion and Flash Integration

Fault Policies using retry and java hadler

Hi,
I am using fault policies to handle a remote and binding faults.Whenever i get a fault i want to retry for 5 times and then call a java handler, which will insert the error into queue.
I have written the fault policies and java handler.But the problem is for each retry it is going to Java handler and pushing the message to queue.
Here is my Fault policies file.
<?xml version="1.0" encoding="UTF-8"?>
<faultPolicies xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<faultPolicy version="2.0.1" id="FaultHandling-faultpolicy">
<Conditions>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:remoteFault">
<condition>
<action ref="ora-retry"/>
</condition>
</faultName>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:bindingFault">
<condition>
<action ref="ora-retry"/>
</condition>
</faultName>
<faultName xmlns:bpelx="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
name="bpws:selectionFailure">
<condition>
<action ref="ora-retry"/>
</condition>
</faultName>
</Conditions>
<Actions>
<Action id="ora-terminate">
<abort/>
</Action>
<Action id="ora-replay-scope">
<replayScope/>
</Action>
<Action id="ora-retry">
<retry>
<retryCount>7</retryCount>
<retryInterval>2</retryInterval>
<retryFailureAction ref="ora-java"/>
</retry>
</Action>
<Action id="ora-java">
<javaAction className="faultpolicies.MyFaultHandler"
defaultAction="ora-human-intervention"
propertySet="customLogProps">
</javaAction>
</Action>
<Action id="ora-rethrow-fault">
<rethrowFault/>
</Action>
<Action id="ora-human-intervention">
<humanIntervention/>
</Action>
</Actions>
</faultPolicy>
</faultPolicies>
Pls guide me what should be done..
Thanks.

There is no point in retry on binding fault, rather you can raise it as exception and catch it in sepcific catch block or catch all will handle it.
Ideally this particular instance will be faulted and if required you can customize to send a mail with fault string to developer or support person or dba
This type of fault need human intervension to fix this code or it could be data issue.
- It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts).
Thanks,
Vijay

HT1414 i lost all my data and contacts on my iphone, is any method to get them back into my phone , i think they all in my itune stored but not sure how to use it !!!

hi ,i lost all my data and contacts on my iphone, is any chance to get them back into my phone , i think they all in my itune stored but not sure how to use it !!!
plz replay if you know how resolve this problem thanks

Hello evanfromvic
If you have a back up in iTunes, you can restore from that back up. The article below will assist with getting that backup restored.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Java mapping how to use com.sap.tc.logging

Hi I would like to know how to use logging within a java mapping.
I know i have to use theese classes : Location, Category, ConsoleLog but i dont know how.
1) How to load the P1, P2, P3 and P4 tags in the Error tag of the SOAP header watched in SXMB_MONI
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">STREAM_TRANSFORMATION_EX</SAP:Code>
<SAP:P1>SwissMedical/Interfaces/IFI002/LiquidacionMapping~</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Java mapping of application triggered an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
2) How to load and activate log in the DIAGNOSTIC tag of the SOAP Header.
- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:TraceLevel>Information</SAP:TraceLevel>
<SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
Thanks!!

As already suggested, you can display custom messages using AbstractTrace.
trace = (AbstractTrace)param.get( StreamTransformationConstants.MAPPING_TRACE );
trace.addInfo("G1-CYCLE is missing");
For more on coding front refer:
http://help.sap.com/javadocs/NW04/current/pi/com/sap/aii/mapping/api/StreamTransformation.html
To get this trace seen in MONI, set parameter TRACE_LEVEL in SXMB_ADM to 2.

Need Expert's Advice - How to use LabView Efficiently and to increase Readability

My application is fairly complex. It is a real world testing applications that simultaneously controls 16 servo motors running various stress testing routines asynchronously and all at the same time. The application includes queues, state machines, sub VI's, dynamically launched VI's, subpanels, semaphores, XML files, ini files, global variables, shared variables, physical analog and digital interfaces and industrial networking. Just about every technique and trick that LabView 2010 has to offer and the kitchen sink as well.
Still I am not happy with the productivity that LabVIEW 2010 has provided, nor the readability of my final product.
Sometimes there are too many wires. Much of my state machines have a dozen or more wires just going from input to output, doing nothing, just because one or two states in the machine need that variable in some state. Yeah, I could spend alot of time bundling and unbundling and rebundling those values, but I don't think that would improve things much.
We have had a long discussion about the use or misuse of Local variables in this forum and I don't want to repeat that here. I use them sparingly where I think it is relatively safe to do so. I also have a bug whenever I try and copy some code that contains one or more local variables. On Pasting the code with local variables, the result is something other than what I expected, I am not sure what. I have to undo the paste and rebuild the code one object at a time.
I am also having trouble using trouble using Variable Property Nodes. When I cut and paste them, they often loose their reference object and I have to go back into the code and redo the Link To on each one. That wastes alot of time and effort.
Creating subVIs is often not appropriate when the code makes many references to objects on the Front Panel. Some simple code will turn into a bunch of object references and dereferences which also tends to take alot of work to clean up and often does not help overall readability in many cases. I use subVIs when appropriate, but because of the interface overhead, not as often as I would like to. My application already has over 150 sub VIs.
The LabView Clean Up Diagram function often works poorly. It leaves way too much empty space between objects, making my diagrams 3 to 4 24" screens wide. That is way too much and difficult to navigate effectively. The Clean Up function puts objects in strange places relative to other objects used nearby. It does a poor job routing wires and often makes deciphering diagrams more difficult rather than easier.
My troubleshooting strategies don't work well for large diagrams and complex applications. The diagrams are so complex that execution highlighting may take 20 minutes for a single pass. Probes help, but breakpoint aren't of much use, because single stepping afterwards often takes you to somewhere else in the same diagram. I can't follow the logic well doing this.
Using structures, I may have Case structures nested 5 to 10 levels deep inside some Event Structure inside a While Loop. Difficult to work with and not very readable.
All and all, I can make it work, but I am not happy about the end result.
I am hoping to benefit from some expert advice from those that are experienced in producing large complex applications efficiently, debugging efficiently and producing readable diagrams that they are proud of.
Can anyone offer their advice on how best to use the LabView features to achieve these results in complex applications? I hope that you can help show me the light.

I'm not an expert but I'm charged out as one at work.
I am off today so I'll share some thoughts that may help or possibly inspire others to chime. I have tried to continually improve my code in those areas and would greatly welcome others sharing their approaches and insights.
Note:
I do refactoring services to help customers with this situation. What I will write does not represent what we do in a code review since our final delverable is a complete final design and that is beyond the scope of this reply.
I'll comment on your points.
dbaechtel wrote:
My application is fairly complex. ...
While watching Olympic figure skating competion slow-motion replays, I learned how the subtleties of how the launching skate is planted while entering a jump can make the difference between a good jump and a bad one.
In software, we plant our foot when we turn from the design to the development. I have to admit that there where a couple of times when I moved from design to development too early and found myself in a situation like you have described.
How to know when design is done?
Waterfall says "cross every 't' and dot every 'i' " while Agile says "code now worry about design latter" and Bottom-up "says "demo working why bother designing" (Please feel free to coment on these over-simplifications gang).
My answer is not much more helpful for those new to LabVIEW.
My design work is done when my design diagrams are more complicated than the LabVIEW diagrm they describe.
dbaechtel wrote:
simultaneously controls 16 servo motors running various stress testing routines asynchronously and all at the same time. The application includes ...and the kitchen sink as well.
Have you posted any design documents you have? These will help greatly in letting us understand your application. More on diagrams latter.
Anytime I see multiple "variations on a theme", I think LVOOP (LabVIEW OOP ) . I'll spare you the LVOOP sales pitch but will testify that once you get your first class cloned off and running as a sibling (or child) you'll appreciate how nice it is to be able to use LVOOP.
Discalimer:
If you don't already have an OOP frame of mind, the learning curve will be steep.
dbaechtel wrote:
Still I am not happy with the productivity that LabVIEW 2010 has provided, nor the readability of my final product.
Sometimes there are too many wires....going from input to output, doing nothing,... spend alot of time bundling and unbundling and rebundling those values, but I don't think that would improve things much.
Full disclaimer:
I used to be of the same opinion and even used performance arguements to make my point. I have since, changed my mind.
Let me illustrate (hopefully). This link (if it works for you, use lefthand pane to navigate hierachy) shows an app I wrote from about 10 years ago when I was in my early days of routing wires. Even the "Main" VI started to suffer from too many wires as this preview from that links shows.
Clustering related data values using Type Definitions is the first method I would would urge. This makes it easier to find the VIs that use the Type def via the browse relationships>>>callers. If I implement my code correctly, any problem I believe is associated with a particualr piece of data that is a Type def has to be in one of the VIs that use that type def therefore easier to maintain.
When I wrote "related data" I am refering data normalization rules (which my wife knows and I picked-up from her and I claim no expertise in this area) where only values that are used together are grouped. E.G. Cluster named File contains "Path" and "Refnum" but not "PhaseOfMoon". This works out nicely with first creating sub-VI since all of the data related to file operations are right there whe I need it and it leads into the next concept ...
When I look at a value in a shift register on the diagram taking up space that is only used in a small sub-set of states, I concider using an Action Engine . This moves the wire from the current diagram into the Action Engine (AE), and cleans up the diagram. The AE brings with it built-in protection so provided I keep all of the opearations related to the the Type def inside the AE I am protected when I start using multiple threads that need at that data (trust me, it may not make a difference now but end users are clever). So that extra wire is effective encapsualted and abstracted away from the diagram you are looking at.
But I said earlier that I would not sell LVOOP so I'll show you what LVOOP based LV apps look like to contrast what I was doing ten years ago in that earlier link. This is what the top level VI looks like.
And this is the Analysis mode of that app.
I suspose I should not mention that LVOOP has wizards that automatically create the sub-VI (accessors) that bundle/unbundle the clusters, should I?
Continuing...
dbaechtel wrote:
We have had a long discussion about the use or misuse of Local variables...I also have a bug whenever I try and copy some code...
If you can simplify the code and duplicat ethe bug. please do so. We can get it logged and fixed.
dbaechtel wrote:
I am also having trouble using trouble using Variable Property Nodes....
That sounds like a usage issue. Posting code to illustrate the process will et us take a shot at figuring out what is happening.
dbaechtel wrote:
Creating subVIs is often not appropriate... My application already has over 150 sub VIs.
"Back in the day..." LV would not even try to create a sub-VI that involved controls/indicators. I use sub-VIs to maintain a common GUI often but I do it on purpose and when I find myself creating a sub-VI that involves a control/indicator, I hit ctrl-z immediately!
I figure a way around it (AE ?) and then do the sub-VI.
Judging by your brief explanation and assuming you do a LVOOP implementation, I would estimate that app need 750-1500 VIs.
dbaechtel wrote:
The LabView Clean Up Diagram function often works poorly....
THe clean-up works fine for how I use it. After throwing together "scratch code" and debugging the "rats nest" I'll hit clean-up as a first step. It guess good enough on simple digrams and in some cases inspires me to structure the diagram in a different way that I may not have thought about. If I don't like, ctrl-z.
Good deisgn and modualr implementaion led to smaller diagrams that just don't need thrre screens.
dbaechtel wrote:
My troubleshooting strategies don't work well for large diagrams and complex applications....Can anyone offer their advice on how best to use the LabView features to achieve these results in complex applications? I hope that you can help show me the light.
Smaller diagrams single step faster since the sub-VI run full speed. I cringe thinking about a 3-screen diagram with multiple probes open ( shivver!).
Re: Nestested structres
Sub-VIs (wink, wink, nudge, nudge)
If it works you have prven the concept is possible. That is the first step in an application.
I hope that gives you some ideas.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How to use Sql Loader in Unix Environmant

Hi All,
Can anyone explain me please how to use sql Loader in unix environment.
Actually i have one control file i want to run that file in Unix how can i achive please explain me
Thank's

Hi Kuljeet,
Thank you for your replay
I just put my control file into the Unix Environmant that's fime
and when i trying to entering the following cmd in Unix environment i am getting this error
sqlldr username/password@string control='unix_pathname'i am not sure about the path name my question is
1) Do i need to give the Local file Path Or Unix Path
This is the error in Sql Loader:
SQL*Loader: Release 10.2.0.4.0 - Production on Mon Sep 24 13:14:23 2012
Copyright (c) 1982, 2007, Oracle. All rights reserved.
SQL*Loader-500: Unable to open file (/bx167a/riskbatch/rdwdbat/sample_upl.upl)
SQL*Loader-553: file not found
SQL*Loader-509: System error: No such file or directory
Could you please correct me
Thank's

How to use "Oracle Real Application Testing"

I am analyzing if/how my employer can make best use of "Oracle Real Application Testing". I therefore read various documentation and articles as well as the relevant sections in the "Oracle® Database PL/SQL Packages and Types Reference". However, there is one conceptual question which I could not yet answer from this documentation.
From what I understood there are (at least) two possible approaches to capture and replay SQL workload:
1) Capture the workload into a STS (SQL Tuning Set) using DBMS_SQLTUNE. Replay the workload before/after changes made to the system using DBMS_SQLPA. DBMS_SQLPA can be further used to compare the before/after execution and to generate comparison reports thereof.
2) Capture the workload into OS files (and optionally into a SQL Tuning Set in addition to that) using DBMS_WORKLOAD_CAPTURE. Replay the workload using DBMS_WORKLOAD_REPLAY. DBMS_WORKLOAD_REPLAY can be further used to compare different replay runs and generate reports thereof.
Now my questions are:
{noformat}(i){noformat} Is the overview I sketched above correct or did I misunderstand/miss important points?
(ii) What is the conceptual difference between the two approaches depicted in (1) and (2) above / what is the intended use for each of them?
(iii) What is the difference between the information that DBMS_WORKLOAD_CAPTURE writes in the corresponding OS files and the information that is stored in a STS? From what I understand, both store information related to SQL execution during a certain period, including the impact of each SQL on the entire workload. Are the two just different formats to store the data (within and outside of the database) or is there any different information stored in them?

Here you have books related to that theme:
http://otn.oracle.com/pls/db92/db92.docindex?remark=homepage
Joel Pérez

How to use a non-Oracle database?

Oracle Lite is used as the database per default. Technical
notes describe how to use Oracle 9i. I'm more interested in using more light-weight RDBMSes like HSQLDB for example. It is been said that Oracle BPEL supports Oracle, Oracle Lite, DB2, SQL Server and Pointbase. Now how to configure Oracle BPEL to use each of the non-Oracle datbases listed above?

I've managed to setup the PM to use Pointbase rather than the default Oracle Lite. Along the way, several questions came up:
1. Since the directory system\database\scripts already provides DDL scripts for Pointbase, creating the tables of a Pointbase database was easy. However, I wonder why you don't support HSQL. After all, OC4J supports HSQL data sources (see database-schemas\hypersonic.xml). Are there any features required by Oracle BPEL that are not provided by HSQL? If not, can we just use the Pointbase DDL scripts for HSQL?
2. Editing the data-sources.xml file also wasn't a big deal although templates for Pointbase were missing. BTW, my XML editor reports the data-sources.xml file to be invalid: "Document cannot be stand-alone because default-value attribute 'connection-retry-interval' is not explicitly assigned.
3. The changes in StartOraBPEL.bat were:
- Comment out running kill_olite.bat and start_olite.bat
- Start the Pointbase server (rather than Oracle Lite)
4. The needed changes in obsetenv.bat were not that obvious: It was required to add the Pointbase libs to the BOOT_LIB classpath. Otherwise the Pointbase driver cannot be loaded. To be on the safe side, I've also added the Pointbase libs to the MY_CLASSPATH classpath but I'm not sure if that is really required. Is it?
5. Finally, it would be good if shutting down the Pointbase server could be done in a similar fashion as that is configured for Oracle Lite. Apparently, some sort of hooking is used. Now how to setup a shutdown hook for a Pointbase server?

When & how to use default settings option in job scheduling with BO 4.1

Hi,
With BO 4.1 we got new features and one of them is "Default Settings" option in the job scheduling. While scheduling a report in CMC we are getting below attached screen. I want to know when and how to use this option? while scheduling job on queries.
Please guide me to, thanks in advance.
Regards,
Mithun Pati.

Hi Mithun,
Below thread may give you clear idea.
The Purpose of the default settings is to have customized default settings for the enterprise. These settings would apply to any user who has access to Info view and wants to schedule a report. For example you can setup default values for "From" section of email so any scheduled reports use those settings. Similarly another setting we have defaulted is the number of retires involved and the seconds for each retry. Business Objects will not send out a failure emails unless the last retry has failed. The default settings should only be modified by an admin.
Purpose of Default Settings when scheduling a WebI report?

Tektronix AFG 3022: How to use both channel with VISA

Hi all!
I am trying to control the AFG with LabView using the NI VISA driver. There are several given VIs I can use, but I don´t know how to use both channels at the same time correctly. I attached a VI I made.
Problems are:
-Sometimes it works, sometimes random errors occur.
-The waveform generation doesn´t start at the same time.
-To stop the waveform generation I used the "initialize VI" because I found no better one. Else the generation goes on and on, even though the task was terminated in LabView.
-How can I trigger the AFG with my NI 6259 in LabView?
I hope someone has some good ideas helping me out...
Best regards
Yopp
Attachments:
AWG_out_pulse_2ch.vi ‏36 KB

Hi Benjamin,
thanks for the replay. You helped me out very good! I had the Visa driver. I downloaded the driver in your link and it´s way better (more functionality) than the one I used. I now have a configuration, which is working. But there are two things I still doen´t know:
- How can I put out a trigger signal on the NI 6259. Am I doing this over the normal daqmx VIs? (I, by now, didn´t have the time to try it myself, maybe someone can give me a hint. Saves time...)
- I want to create two signals on the AFG that are the same, but one is inverted. At the AFG it is no problem (output menu-> invert on/off). This function doesn´t seem to be available in the driver. Is there a possibilty to modify the driver and create a VI with that functionality? Can anyone do this for me or explain to me what I need to do it myself and how to do it?
Best regards
Yopp

[BPELConsole] How to use "Retry / Abort / Rethrow / Replay / ... " actions?

Similar Messages

Maybe you are looking for