BPM can't be executed successfully.

Hi all:
       I am trying to implement a two-files to one file senario via pi BPM in which a fork with two branches is used. the sender files would be picked. and there would be a receiver on the receiver floder . but the files could only be picked , no file found in the receiver floder. There are two XML messages for two files after it executed as SXMB_MONI shows, it is found in message one in the workflow log that the fork branch in green for the file1 has recieved the file1 but it couldn't go through in another branch . In another message , it shows that file2 received, but it couldn't go through the branch for file one.
       Could you please tell me where the error is ?
     Thank you very much!!!

Fork is used when you want to do 1 file to 2 files scenarios
VJ, fork can also be used when you want to configure 2 filed to 1 file scenario as required here.
In your case the files are not properly recognized by the correlation instances of BPM. You may try to delete all the earlier open BPM instances (if the server is not production) using transaction SWWL for all previous dates. Also delete the queue entries from smq2. Then run the scenario again. Also check if your transformation step is working properly.
Regards,
Prateek

Similar Messages

Webdynrpo application can't be executed successfully

I created a demo webdynrpo program and applicaiton ,but when i run the webdynpro applicaiton ,i get below error.
I don't know why i got this.
Could some one tell me what's the reason? and how to fix it?
Thanks you very much.

Hi Ram,
Thanks for your help. But it doesn't work.
Today, this issue is resovled finally.
It need to do some configuration for the URL . For details ,pls find the help link:
Fully Qualified Domain Names (FQDN) - Developing, Configuring, and Adapting Applications - SAP Library
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm

How to know weather SP is executed successfully?

I call stored procedures from JDBC, how do I know that the sp is
executed successfully or not. If I know the status, then I can
do commit or rollback.
Please help.
Thanks,
Tony
null

hi,
Iam not getting any application error or any IDE error.
the problem is example, i have a jsp named 1.jsp, in this jsp iam including some 2.jsp using <jsp:include "2.jsp" flush="true"> after that i have some code in 1.jsp.
The problem is that 2.jsp is not at all there, so how can i know 2.jsp is invalid jsp.
My requiremnt is iam not hard coding name as 2.jsp ,if user entres some wrong jsp name,how can i know that jps is not a valid 1.
thanks,

How can I include a success message in a drag and drop interaction - I don't see this option in the Actions on success options, and cannot figure it out?

How can I include a success message in a drag and drop interaction - I don't see this option in the Actions on success options, and cannot figure it out?

I suspected you used the eye icon on the timeline to hide the message, but that one has no impact whatsoever on the published version. It is only meant to be used for editing reasons on the stage, to hide objects temporarily on a crowded stage. It is confusing, certainly in CP8 where for both instances the same eye icon is used. In previous versions the Properties panel had a checkbox for 'Show in Output', which was IMO much clearer than this eye icon. But of course, that is only my personal opinion.

(HELP~) Most applications can not be executed

Hi, after updating my OSX 10.6.4, most applications (such as iTunes, iPhoto, Pages, Firefox... etc.) can not be executed. They always shows that the application can not be executed on this OS, even I had checked my MAC HD.
However, when I swith to bootcamp OS (Windows XP sp3), everything goes fine.
How can I fix it?
Thank you all.

Create a new User go to System Preferences > Accounts > "+" (make it an admin acct) and test the apps in this new account, if they work the problem is isolated to your User and not systemwide.
If the issue is limited to your user account try starting up Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
If your apps functions correctly that way, go to System Preferences >> Accounts >> Login Items, and remove them. Boot normally and test. If not go to/Users/yourname/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving/Users/yourname/Library/Fonts to your desktop and restarting.
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
If the issue is systemwide then, you may be able to repair this with the The 10.6.4 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
-mj

Cannot find stored procedure in Programmability despite being executed successfully

Hi
I have created a Stored Procedure in SQL Server which is parsed and executed successfully but when I check it in Programmabilty-> Stored Procedures I cannot find it. After refreshing the whole database and also restarting SQL Server, the problem is occuring.
Help with a solution.
The Stored Procedure is
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'Issues') AND type in (N'U'))
BEGIN
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'DeleteIssue') AND type in (N'P', N'PC'))
BEGIN
DROP PROCEDURE DeleteIssue
END
EXEC sp_executesql @statement = N'CREATE PROCEDURE DeleteIssue
@issueId INT
AS
BEGIN
DELETE
FROM
Issues
WHERE
IssueId = @issueId
END
END
Thanks and Regards
Sarthak

May be you are checking in the wrong database or the conditions to create the SP is not met(Issues
table doesn't not exist in the db). What is the output from this query?
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'Issues') AND type in (N'U'))
BEGIN
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'DeleteIssue') AND type in (N'P', N'PC'))
BEGIN
DROP PROCEDURE DeleteIssue
END
EXEC sp_executesql @statement = N'CREATE PROCEDURE DeleteIssue
@issueId INT
AS
BEGIN
DELETE
FROM
Issues
WHERE
IssueId = @issueId
END
END
ELSE
BEGIN
print'ISSUE doesnt exist'
end
Satheesh
My Blog |
How to ask questions in technical forum

How can java programs execute automatically when it connects to network

Good Day dears...
How can java programs execute automatically when it connects to network.
Thanks in Advance friends Shackir

884924 wrote:
Good Day dears...
How can java programs execute automatically when it connects to network.What is "it"? That is, execute when what connects to the network?
Your computer? If that's what you mean, this is not a Java question. It's an OS operational/administrative question. Executing any program, whether written in Java or not, based on some system event has to do with that system, not with the program. If it's possible to do this, you'd do it exactly the same way for a Java program as you would for any other program.
Or is "it" the program itself? If this is what you mean, then it's a nonsensical question. For the program to connect to the network and detect that it has connected to the network, it must already be executing, so asking how to execute it at that point is meaningless.
Finally, I'll point out that "connecting to the network" is a pretty meaningless phrase. Or rather, it has so many potentially valid meanings that it's impossible to know which one you're referring to when you use that phrase. And I'd be willing to bet you don't have a clear picture of that yourself.

How can I add multiple, successive destinations in "Maps" such as on a delivery trip with several stops ?

How can I add multiple, successive destinations in"Maps" such as on a delivery trip with multiple stops and so needing driving directions i.e. set up a route ?

Maps help:
Mark a location with a pin
You can drop a pin on a location to get directions or help you find it again.
Open Maps
On your map, go to the location you want to mark with a pin.
Choose View > Drop Pin. If the pin isn’t exactly where you want it, put the pointer on it and hold down the button until the pin “hops.” Drag the pin into place, then release the button.
To see information about a location, click its pin, then click the Info button. To close the Info window, click outside of it.
To remove a pin, select it, then choose View > Clear Pin.
Get directions
Using Maps, you can get directions to help you navigate on foot or behind the wheel. Once you've decided where you're going, click the Share button to send your map and directions to your iPhone. (Your iPhone must have iOS 7 and be signed into the same iCloud account as your Mac.)
Open Maps
Do one of the following:
Click Directions to open the directions sidebar, then enter the starting and ending locations.
On the map, click a pin to display its info banner, click the info button to see more info, then choose “Get Directions.” (If your starting location doesn't have a pin, you can Control-click or tap it with two fingers, then choose Drop Pin.)
Click either the car (driving directions) or person (walking directions).
If multiple routes appear on the map, click the one you want to take.
To zoom in on a turn, click it in the directions sidebar.
To close or reopen the directions sidebar, click Directions in the toolbar.

I can't sync calenders successfully

Please help. I can't sync calenders successfully. I'm using Outlook on XP and syncing to iPhone via USB with no problems. Now have a lovely shiny new i Pad and am trying to sync that with the i phone over i Cloud. I seem to be ending up with either multiple calenders, or some showing on one device and not the other.
It is proving extremely frustrating!
I would like just on calenders synced over the three devices. I don't need one called calender and another called work etc etc.
Any input gratefully received..

Hi burro!
What exactly appears to be happening when you try syncing games to your iPod?
Do you get any error messages? If so, please quote what it says, and when it happens.
As a basic iPod-game-syncing troubleshooting step, is your iPod a Fifth Generation iPod? If it is not, then sorry, it won't be able to play these games from the iTunes Store.
If you're not sure about your iPod model, see if this article helps you determine that:
Identifying iPod models
If you do have a Fifth Gen, then is its firmware upgraded to at least 1.2? (Preferrably, you would want the iPod's firmware to be updated to 1.2.1, which is the latest version, since that update fixed some problems that 1.2 brought on).
Also, if you are getting a message that says something like "you are not authorized to transfer games", then you'll need to authorize your computer.
To do that, from the "Store" menu in iTunes, click on "Authorize computer...", and follow the steps from there.
For general iPod games troubleshooting, see this article:
Troubleshooting iPod games
-Kylene

Scenario File to RFC (BAPI): BAPI not executed successful

Hi Dear Friends!
At execution of asynchronous Scenario File to RFC (BAPI BAPI_ACC_DOCUMENT_POST)
I have the following error in RWB Communication Channel (RFC receiver):
- Error: 2007-07-25 11:08:25 EEST: Message processed for interface BAPI_ACC_DOCUMENT_POST:
com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message
to remote system:com.sap.aii.af.rfc.core.client.RfcClientBapiException:
BAPI not executed successful
Simultaniously Test Configuration was executed successfully. And mapping is good.
But I don't any message in target system in sxmb_moni (formed by BAPI).
In XI system I see in sxmb_moni:
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface mi_sender*</Trace>
<Trace level="1" type="T">select interface namespace urn:file:to:bapi</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface *</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
Please help me understand my error.
With the best regards,
Natalia Maslova

Hi, Dear Friends! Thanks for support!
My settings of
Connection between systems:
DX7 01 (client 001) - XI Integration Server and DE2 13 (client 200) - target system.
Phisically both systems are in one server: 10.20.30.24 (srv24)
Business system DE2_200 has Communication Channel: cc_bapi_r, its settings (in Integration Builder Configuration):
Adapter Type: RFC
Receiver
Transport Protocol: RFC
Message Protocol: RFC (RFC XML)
Adapter Engine: Integration Server
RFC Client Parameter:
RFC Server Type: SAP System
Application Server: 10.20.30.24
System Number: 13
Authentication Mode: Use Logon Data for SAP System
Logon User: n_maslova
Logon Password: *******=*******
Logon Language: EN
Logon Client: 200
Maximum Connections: 1
x Advanced Mode
x Send 'Confirm Transaction'
x Commit Handling for Single BAPI Calls
x BAPI Advances Mode
Successful RETURN-TYPE Values: 0
As I understand these settings are the settings of RFC-destination for target system DE2 13 (200) from XI (DX7 01 001).
In SLD, Business system DE2_200 is defined as:
Integration:
Role: Application System
Related Integration Server: DX7_001
Technical System: DE2 on srv24
Client: 200 of DE2
Logical System Name: DE1CLNT200
In target system DE2 13 (200) with the help of transaction sm59 I created
RFC-destination DX7_001 of type H:
Technical setting parameters:
Target Host: 10.20.30.24
Prefix Path: /sap/xi/engine/?type=entry
Service Number: 8001
Registration and Safe:
SSL: Non active.
SSL: client certificate: DFAULT SSL-client
Enter to system:
Language: EN
Client: 001
User: PIAPPLUSER
Status PW: saved
Password: ********
After that in this system DE2 13 (200) with the help of transaction sxmb_adm I set in Integration Engine -> Configuration -> Configurate Integration Engine
(Change Global Configuration Data):
Role of Business System: Application System
Related Integr. Server: dest://DX7_001
Best regards,
Natalia

REP-50159: Executed successfully but there were some errors when distribt

Hi,
i get this error(REP-50159: Executed successfully but there were some errors when distribute the output)
when i distribute output using following url.
http://myserver.com:7778/reports/rwservlet?server=rep_myserver_oracleas2+report=D:\Reports\emp.rdf+userid=abc/xyz@mydb+desformat=pdf+DESTYPE=mail+DESNAME="[email protected]"+FROM="[email protected]"
I am working on ORA AS 10g(10.1.2.0.2),Windows Server 2003
Please mark out suggestions.
Regards,
IK

@Inol ...yea i have configrd the mail server(smtp) properties in report server,when the destype is file, the url works fine.i.e generate the file on specified location.
but using destype mail, it fails, whether i use the url, or use the even driven api procedure..
Running the procedure its the debugged out put with error...
* WELCOME TO EVENT-BASED-REPORTING API *
* API-Version : 9i *
* (C) Oracle Corporation, 2000 - 2002 *
* Debugging turned ON **************************
*** Length of Paramlist : 1
OK : Parameter added : GATEWAY=http://myserver.com:7778/reports/rwservlet
*** Length of Paramlist : 2
OK : Parameter added : SERVER=rep_myserver_oracleas2
*** Length of Paramlist : 3
OK : Parameter added : REPORT=D:\Reports\emp.rdf
*** Length of Paramlist : 4
OK : Parameter added : USERID=abc/xyz@mydb
*** Length of Paramlist : 5
OK : Parameter added : DESTYPE=mail
*** Length of Paramlist : 6
OK : Parameter added : DESFORMAT=PDF
*** Length of Paramlist : 7
OK : Parameter added : [email protected]
Starting run_report: building url
*** Building URL (RUN_REPORT)
OK : URL built :
http://myserver.com:7778/reports/rwservlet?SERVER=rep_myserver_oracleas2&REPO
RT=D%3A%CReports%5Cemp.rdf&USERID=abc%2Fxyz%40mydb&DESTYPE=mail&D
ESFORMAT=PDF&DESNAME=khan.emran84%40gmail.com&statusformat=xml
*** Submitting HTTP Request
*** using URL
:http://myserver.com:7778/reports/rwservlet?SERVER=rep_myserver_oracleas2&REP
ORT=D%3A%5CReports%5Cemp.rdf&USERID=abc%2Fxyz%40mydb&DESTYPE=mail&
DESFORMAT=PDF&DESNAME=khan.emran84%40gmail.com&statusformat=xml
OK : Request submitted - Return stream : <?xml version = '1.0' encoding =
'ISO-8859-1' standalone = 'yes'?>
<serverQueues>
<error code="50159"
component="REP" message="Executed successfully but there were some errors when
distribute the output"/>
<
OK : Request submitted - Length of stream : 229
*** XML-Parsed - Following Structure discovered :
*** Checking elements!
serverQueues ()
*** Checking attributes!
error
*** Checking attributes!
__code = 50159
__component = REP
__message = Executed successfully but there were some errors when distribute the
output
*** Finished Parsing XML
Getting value for element: job
Getting value for element: error
*** Requesting value for Attribute error.component [REP]
Getting value for element: error
*** Requesting value for Attribute error.code [50159]
Getting value for element: error
*** Requesting value for Attribute error.message [Executed successfully but
there were some errors when distribute the output]
REP-50159:Executed successfully but there were some errors when distribute the
output
declare
ERROR at line 1:
ORA-20999:
ORA-06512: at "NRSP.SRW", line 264
ORA-06512: at "NRSP.SRW", line 799
ORA-06512: at line 15
--- i am stuck here...
-- Googled the error but in vain.....

I can't open any 60p .mov files in quicktime. Footage was shot on a JVC GY HM150 which is supposed to record in native fcp format. Any ideas how I can open these files successfully?

I can't open any 60p .mov files in quicktime or FCP5. Sometimes in QT the audio plays but not the video. Footage was shot on a JVC GY HM150 which is supposed to record in native fcp format. Any ideas how I can open these files successfully?

Get ClipWrap2 and convert to an editable format for your version of FCP5.
Probably DVCProHD will work
x

REP-50159: Executed successfully but there were some errors when distribute

HI All,
I am using Oracle 10g Rel2 application server on linux environment. I am calling oracle reports from forms i am getting REP-50159: Executed successfully but there were some errors when distribute error.
I am using Destype :PRINTER and Desname:Printername. Please help us in resloving this issue.
Thanks & Regards,
Ram

Try editing rwlpr.sh in $ORACLEHOME/bin and change the lines (at around line 172) from
if [ ! -x $PRNCMDPATH ]
then
searchcommand $CMD
fi
to
if [ -z $PRNCMDPATH ]
then
searchcommand $CMD
fi
It worked for me :-)

How to trap Duplicate command executed successfully.

Hi,
I have attaced observer to document for listening protocol IID_ICOMMANDMGR for trapping command kDuplicateCmdBoss. When I perform duplicate from "Option + Drag" the kDuplicateCmdBoss command gets executed before duplicating the item.
The documentation for kDuplicateCmdBoss says that "The page items in the command's item list are duplicated if the command is prepared successfully." But How to find the command is executed successfully.
Please help me.
Thanks,
Praveen

For tracing drag action on layout, I have used following
Class
        kBscDNDLayoutSourceHelperBoss,
        kInvalidClass,
            IID_IK2SERVICEPROVIDER,        kLayoutDDSrcHelperProviderImpl,
            IID_IDRAGDROPSOURCECONTENTHELPER,    kBscDNDLayoutDragSourceImpl,
and the implementation class BscDNDLayoutDragSource id derived from CDragDropSource, In which currently I am overriding only WillDrag method as below.
bool16 BscDNDLayoutDragSource::WillDrag(IEvent* e) const
    CAlert::InformationAlert("drag started");
    return kFalse;
The alert is displayed but after that InDesign got crashed. Thus I checked it by returning false still InDesign get crash.
Any hint might solve my problem .
Please help.
Regards,
Praveen

How can I remove Firefox successfully and allow hyperlinks to work?

I need to clear space on my PC and wish to remove Firefox. I tried this but then could not open any hyperlinks from e-mails in Outlook. I tried various options suggested on the Outlook help page but to no avail. How can I remove Firefox successfully and allow hyperlinks to work?

Have you tried resetting your Default Browser back to IE, thru the Control Panel > Add / Remove Programs?

BPM can't be executed successfully.

Similar Messages

Maybe you are looking for