BPM :Doesn't support sync messages Exception CX_WAPI_DEF_PROPERTY_NOT_FOUND

Hi ,
I am facing error while creating BPM Scenario ,...,
This is first BPM scenario in Current landscape
Synch-async Bridge
File - ECC(Sync) - File
But I am Getting following error ....
What could be possible reasons....
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">SYNCHONOUS_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>The process does not support the given synchronous interface or does not
support synchronous messages Exception CX_WAPI_DEF_PROPERTY_NOT_FOUND occurred (program:
SAPMHTTP, include: , line: 0).</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>

Hi - I am getting the same error on my async/sync bridge scenario:
"The process does not support the given synchronous interface or does not support synchronous messages An exception has occurred."
viewable in sxi_monitor. My scenario is JMS->PI->RFC (then response back). Can you expand please more fully on what you did to solve your issue?
Regards,
Keith

Similar Messages

Can't send- doesn't support authentication: Road Runner

Hello all,
I have a new Mac Book Pro and it won't accept the settings I am entering in Mail.
Mail automatically set up the first Road Runner (RR) account no problem and retrieved old mail from server but it wouldn't let me send mail or get mail soon after that.
I am getting "doesn't support authentication" message and have changed that setting with no luck. Also message of can't connect to SMTP server.
Anyone know if I should check SSL, which authentication I should check,
in prefs> acct> the 2nd line of info RR Pop is greyed out.
I know my passwords are right I copied them over from other 2 computers on my network that are getting mail and sending just fine. But who wants to use a G4 imac and iBook:)
Obviously I have a setting wrong.
thanks,
Al

Hi,
What Authentication are you using on this SMTP? If not already, try using None, and removing Password and Username from SMTP setup for at least one test. Most Roadrunner SMTP are authenticated by reference to the IP address of your Modem, and using a separate authentication of the SMTP results in failure.
Mail Preferences/Accounts/Account Information, then click on the arrows beside the name of the SMTP in the section on Outgoing Server. After you click on the arrows, choose Edit Server List. Then if the SMTP is set up with the correct name, etc, click on the Advance Tab, use Custom Port with Port 25, None as authentication, and do not enter any Username and Password. Under authentication of None, the name of the SMTP will not have your Username appended.
Let us know, but Roadrunner can vary from area to area on this, but this is the way it seems to always work.
Ernie

BPM Fault Message Exception error !

Hi here is what I am doing
Sync webservice-->Sync webservice call using ccBPM.
This is what I defined in the BPM
1.)Sync rec
2.)Block with Exception handler.
3.) Sync send inside the Block with Fault exception defined.
I defined fault messages for the interface. The Interface works fine when there is no exception but when there is a Fault exception I get the following error in SXMB_MONI_BPE "No exception defined for fault message Faultmessage urn:XXXXX:XXXXXXX ". Exception 8999, Error type 2, Area SWF_XI_ADAPTER Message 81. Variable1 Faultmessage and Variable2 the namespace".
I rechecked my BPM and could see the Fault Exception defined for the Sync send step and it has an exception defined for it too.
I checked SXI_CACHE and the return code is 00.
We are running on PI7 SP13. Did any one face this kind of problem .

Hi there,
I have the exact issue in PI 7.1. Have any of you guys could resolve it? Can you please share your responses.
Thanks.
Anshul

Iv'e got this error message : "protocol doesn't support output"

When i execute my applet the part of code below give's me thi error message: "protocol doesn't support output". This part of the code save's a vector(of string) into a data file. I'm able to load the file but i can't put info in it. Helppppppppp:
That's the method where tje problem is :
private void saveVector()
Evenement Ev;
try{
// THE ERROR IS PROBABLY IN THE 2 NEXT LINES!
Dos = new DataOutputStream(new BufferedOutputStream( new URL(this.getCodeBase(), FichierEvenement).openConnection().getOutputStream()));
for ( int i = 0; i <= VecEvenement.size();i++ )
Ev = (Evenement) VecEvenement.elementAt(i);
String Ligne = Ev.getDateEvent().trim().concat("|")+ Ev.getTitre().trim().concat("|") + Ev.getLieu().trim().concat("|") + Ev.getDesc().trim().concat("|") + Ev.getPers().trim().concat("|")+ Ev.getAdresse().trim().concat("|");
Dos.writeUTF(Ligne);
Dos.close();
catch (Exception e) {
LErr.setText(e.getMessage());
}

http://java.sun.com/docs/books/tutorial/networking/urls/readingWriting.html
As is noted in this part of the tutorial, a URL may simply not support output:
"Next, the program creates the URL object--the URL for the backwards script on java.sun.com--opens a URLConnection, and sets the connection so that it can write to it:
URL url = new URL("http://java.sun.com/cgi-bin/backwards");
URLConnection c = url.openConnection();
c.setDoOutput(true);
The program then creates an output stream on the connection and opens a PrintWriter on it:
PrintWriter out = new PrintWriter(c.getOutputStream());
If the URL does not support output, getOutputStream method throws an UnknownServiceException. If the URL does support output, then this method returns an output stream that is connected to the standard input stream of the URL on the server side--the client's output is the server's input. "
Sorry I can't be of more help.

Sun Java System Messaging Server doesn't support some ISO 8859 charsets

Hello,
I couldn't find any link to report bugs on the Sun Java System Messaging Server, so i guess i'll report it here:
Sun Java System Messaging Server currently doesn't support the ISO 8859-13 charset, which is the standard charset in the Baltic states. When a person recieves an email in that charset, every non-ASCII character in the message becomes absolutely unreadable when displayed in this webmail application.
This has been tested with this version of the product:
X-Mailer: Sun Java(tm) System Messenger Express 6.1 HotFix 0.01 (built Jun 24 2004)
Furthermore, you can test the case by yourself using this link: http://www.lietuvybe.org/testas/. You can enter your e-mail address there to get a few sample messages in Baltic and Cyrillic charsets. You will see that the Sun Java System Messaging Server passes all those tests except this particular one. So, it's a very nice product. :)
It would be very very very cool if Sun would fix this small, but very important issue.
regards,
Rimas Kudelis

Hey! :)
I am feeling some bad vibes, here.Hey, sorry, I didn't want you to think it's personal. I didn't really mean to hurt you or whatever. You are trying to help and I do appreciate that. I really do.
The reason i'm a bit sad is about the policy of others:
First, i am not a provider of that webmail service i'm talking about. A big Lithuanian company is. Personally, I rarely use webmail apps at all, and even when i do, i use an app i internationalized myself. :). Meanwhile, i install Horde IMP as a webmail application for my small servers, and i'm satisfied with it.
The problem i described is literally not my problem. It's a problem of that big Lithuanian company mentioned above (and the users of its webmail system). I suppose this company does have that account already and, furthermore, they are the ones who should post to this forum or file a support request., and they are the ones who should be worried about that bug. However, reality differs. In reality, big companies in Lithuania don't care about correctness of their webmail apps too much. However, there are a few maniacs like me who do. We test their webmail apps, we contact them and describe them their problems and ask them to fix those problems. Sometimes, they do that, but in most cases we either don't get a reply at all, or we get something like "we'll take a look at it later". For example, lately, we had an issue with one of the most popular webmail providers in Lithuania skipping a MIME-version header. Fixing this issue is just a single line of code. However, we had to push them annoyingly for kinda few months until they finally fixed it.
That was the first aspect.
The second is that i don't really like to create hundreds of accounts for myself just to ocasionally report bugs like this one. If only Sun would let me to simply file a bug, and forget that, i would gladly do it. But no, i have to find a deeply hiden support page, then fill a form, create myself an account and a password, then log on, then fill some misterious support request... Do I have to do that for a company that won't even consider thanking me? I think that's too much. Furthermore, every party on the net enforces it's own username and password restrictions. That sucks too. I wish i could just log on as "rq" everywhere like this forum, using the same password i could easily remember. However, i have to use "rq", "er-ku" or "erku" or "rq@something" as my username on different platforms, and sometimes even my (long enough) password is not accepted. It's hard to track such accounts, and in most cases like this one, i don't really want to have an account at all, as i'm just passing by.
To summarize the post: I'm NOT a licenced user, and all I wanted was to file a bug, which affects licenced users and ordinary people.
How do i remove my account from this forum now? :)

MAC OSX 10.4.11 I finally succumbed to the constant irritating messages telling me that I didn't have the latest version. My old version and all my bookmarks have been deleted my Mac says it doesn't support Firefox! How can I recuperate my old settings?

MAC OSX 10.4.11 I succumbed to the constant messages telling me that I didn't have the latest version, despite being happy with the one I had. My old version and all my bookmarks have been deleted and now my Mac says it doesn't support Firefox!!!!! How can I recuperate my old settings? in English

Firefox 4 versions and later '''do not run on a PowerPC Mac''' (like yours) and require '''at least OS X 10.5 and an Intel Mac'''.
The latest supported version for your os is '''3.6.27''' , you can download it from:
http://www.mozilla.org/en-US/firefox/all-older.html
1. Download a 3.6.27 copy of the Firefox from the above link
2. Trash the current Firefox application to do a clean (re-)install.
3. Install the new version that you have downloaded(3.6.27)
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so probably you won't lose your bookmarks or other personal data, if you don't already ''totally'' uninstall firefox(user data and settings like bookmarks, extensions, etc. located here: ~Library/Application Support/Firefox so you must uninstall it separately, to totally uninstall firefox).
see also : [https://support.mozilla.org/en-US/kb/Installing%20Firefox%20on%20Mac Installing Firefox on Mac]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

TS4002 Can you tell me if the smtp settings have changed recently? I use me/ICloud mail with Outlook and can not receive emails but outgoing emails are no longer working. Error message is: Authentication failed because Outlook doesn't support any of the

I am able to receive messages on my IMac using Outlook but am unable to send. I've had no trouble in the past but began receiving the following messages today.
5.7.8 Bad username or password (Authentication failed).
Authentication failed because Outlook doesn't support any of the available authentication methods.
I am able to send messages using this account on my IPhone and IPad so the IMac is the only place I am having issues. Any advice?

Here are the correct settings. They have never changed since iCloud debuted a year ago.
Server information
IMAP (Incoming Mail Server) information:
Server name: imap.mail.me.com
SSL Required: Yes
Port: 993
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
SMTP (outgoing mail server) information:
Server name: smtp.mail.me.com
SSL Required: Yes
Port: 587
SMTP Authentication Required: Yes
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
Note: If you receive errors using SSL, try using TLS instead. SSL is required for both IMAP and SMTP connection with iCloud. POP is not supported by iCloud.

2011 MacBook Pro, 64 bit i7 quad core, upgraded to Lion OSx, Bootcamp installed with Windows 7, wanting to install Windows 8 (don't ask), tried downloading/installing bootcamp 5.0.5033, error message something similar to bootcamp doesn't support this Win

2011 MacBook Pro, 64 bit i7 quad core, upgraded to Lion OSx, Bootcamp installed with Windows 7, wanting to install Windows 8 (don't ask), tried downloading/installing bootcamp 5.0.5033 (both on the mac/windows partitions (actually using a parallel to run Windows)), error message something similar to bootcamp doesn't support this Windows
So the question is am I doing something wrong? Should I just try and install windows 8 through my windows 7 partition and see if I can use the bootcamp 5.05033. Or do I solely have to use the bootcamp to install Windows 8? I'm not too familiar with bootcamp and how it runs.

if you're using parallels and full bootcamp then you're making it 100% more troublesome for youself then it needs to be
bootcamp is running windows directly on the hardware this give full memory and cpu and 3d video game power
running windows in parallels is running a virtual machine where one can't run powerful games and the like but one can have it in a window and change fast between osx and windows
parallels as the only virutal machine (as far as I know) support not have the operating system as a file on the osx harddisk but can access a bootcamp parition as virtual machine but without the benefits bootcamps provides
it's a service parallels provide for those who want both to play games in normal bootcamp and sometimes use windows in a virutal machine
just install it like a normal virtual machine and you need not worry about bootcamp drivers and the likes
plus it would mean that the windows part would be a part of the timemachine bacup of osx
which it is not when it's in bootcamp

I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera. I have a Nikon 5100 DSLR Camera. It always displayed

I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera. I have a Nikon 5100 DSLR Camera. It always displayed them in the past. How can I get it to display these photos in Bridge and open them in RAW?

Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7 Update
Benjamin

Just got a Nikon D610 and CS5 for Mac can't open the images -- message says installed version of camera raw doesn't support the camera. Downloaded the Raw 6.2 update for Mac, but installation failed. Now what?

just got a Nikon D610 and CS5 for Mac can't open the images -- message says installed version of camera raw doesn't support the camera. Downloaded the Raw 6.2 update for Mac, but installation failed. Now what?

The D610 didn't get out-of-the-box RAW support until Photoshop CC.
You can either upgrade to CC or use the DNG Converter to convert and open your DNGs in CS5.

Apple TV error message HDMI doesn't support HDCP

Apple TV error message HDMI doesn't support HDCP

I ran into this problem and I re-started the Apple TV by holding down the Menu+Down arrow buttons, restarting my television and now i can watch everything.

I've received a message that says that the new version doesn't support AVG . This is real ?

I've received a message (from Firefox) that says that the new version doesn't support AVG . This is real ?

Actually the message stated that the version of the AVG extension you have did not support Firefox 7.0.1 or whatever version you were using at time.

HT1386 How do I sync my iphone 5s with my imac because it is only 10.6.8 and doesn't support icloud. Apple tell me that my beautiful imac is vintage and I should ditch it!!!! Where is their eco conscience. I have been using mac for years and years now

Does anyone know how to sync my iphone 5S with my imac 10.6.8 - which doesn't support icloud and can't be updated to do so.
Apple tell me that it is a vintage computer now and I must throw it away and buy a new one. Where is their social/eco conscience ...
we are living in hard times trying to survive and trying to keep our businesses healthy. Now is not the time to buy a new computer.
What is Apple playing at??????

You plug the phone into your computer and go to the Info Tab for the device in iTunes. Select what you want to sync. You should not attempt to sync with both iCloud and the local contacts on the Mac.
Are you having some kind of problem doing this?

Since upgrading to LION, stuffit doesn't work (get message Power Pc apps no longer supported) So, how to I unzip RAR files now?!?

since upgrading to LION, stuffit doesn't work (get message Power Pc apps no longer supported) So, how do I unzip .RAR files now?!?

Use the current version of Stuffit Expander.
(63916)

I have cs5 and when I try to download a raw file from my Nikon 810 an error message says this versioln of raw doesn't support this camera model. Yet I just updated cs5 online.

I have CS5 and when I try to download a raw file from my Nikon 810 I get an error message saying this version of raw doesn't support this camera model. Yet I just updated CS5 online.

I do not use lightroom and I have a subscription so I can open all supported RAW formats. You will need DNG file for Your Camera's NEF files for use in Photoshop ACR version. You can open your NEF files in LR it seems so you could do all your raw conversion with Lightroom and save out Tiff files for processing in Photoshop. I do use lightroom for I do not need its library. Lightroom does not support layered files so lightroom is of no value to me. ACR UI is all I need having a second interface to Adobe Raw Conversion Engine would more annoyance than value to me.

BPM :Doesn't support sync messages Exception CX_WAPI_DEF_PROPERTY_NOT_FOUND

Similar Messages

Maybe you are looking for