BPM process query integrating with EP

Hello,
Our present finance process where in we are using lotus notes for approvals workflow.
--> user login to lotus notes fill the form and clicks submit and this triggers approval workflow's in lotusnotes and after approvals it generates a form and the form details will be filled in SAP ECC.
We are going for SAP BPM for approval workflows to phase out lotusnotes.
we will design the financial form in Enterprise portal when the user submits it comes to BPM where the workflow triggers and the form will be generated that is adobe form.
My question :
Do we integrate EP 7.0 and BPM through UWL
i have gone through this document is this the correct procedure for connecting EP and BPM https://cw.sdn.sap.com/cw/docs/DOC-107512
How do we integrate BPM and adobe forms
Regards,
Madhu

Used visual composer!1

Similar Messages

ALBPM 5.7 BPM process admin issues with Oracle 11g RAC as directory service

Hi,
Setup ALBPM 5.7 enterprise for weblogic.
BPM Engine deployed on weblogic cluster.
BPM process admin (web console) deployed on tomcat.
BPM process admin uses WEB-INF/directory.properties for directory configuration.
things were fine with oracle SID,
directory.default.url=oracle://<db_host>:1521/schema=diruser,sid=BPMDB { with this, login to process admin was working fine}
But clueless, on how to configure RAC as the directory service in the above directory.properties file. Since this is a old version, no directory.xml in the installation.
Connection string:
(DESCRIPTION =
(LOAD_BALANCE = on)
(FAILOVER = on)
(ADDRESS = (PROTOCOL = TCP)(HOST = DB_HOST1)(PORT=1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = DB_HOST2)(PORT=1521))
(CONNECT_DATA =
(SERVICE_NAME = BPMDB)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
Please help how to use service name (above connection string) in directory.properties, to be able to login to process admin successfully.
Thanks in advance,
Swamy

Using admin center, able to get the string to be used in directory.properties.
FYI, the string looks like below,
directory.default.url=oracle://customURL:0/schema=bpmdirectory,customURL=jdbc:oracle:thin:@(DESCRIPTION = (LOAD_BALANCE = on)(FAILOVER = on)(ADDRESS = (PROTOCOL = TCP)(HOST = DB_HOST1)(PORT=1521))(ADDRESS = (PROTOCOL = TCP)(HOST = DB_HOST2)(PORT=1521)) (CONNECT_DATA = (SERVICE_NAME = BPMDB.DOMAIN.COM) (FAILOVER_MODE = (TYPE = SELECT) (METHOD = BASIC))))

Start BPM Process from ABAP with another User as GUEST

Hi all,
i would like to start the BPM Process by a webservice. It works if the user GUEST has the role BPM_SuperAdmin.
My question is: How can i chance this user, who call the webservice starting the process. The user, who starts the process by calling the webservice should be my own user instead of GUEST.
Thanks in advance.
Regards,
Christoph

the last reply is regarding the configuration at consumer side.
of course you have to configure at the service provider side to enable the logon ticket as acceptable authentication method.
I checked at my side, i found the the service for triggering bpm is already configured to use id/pwd and logon ticket as authentication method.
you can check in this way,
CE nwa-> SOA Management->Application and Scenario Communication-->Single Service Administration
find your service, if you haven't assign any profile to your service, there will be only one configuration generate by system
you can edit this configuration.
go to configuration tab, select the endpoint, select security tab in the bottom tab list.
change the setting there.
Edited by: John Wu on Sep 10, 2010 7:29 PM

Quality Center 11 (ALM) Query - Integration with Subversion and Jenkins

Hi OHPCPaT Forum,
Are there any restrictions to enabling the QC integration with Subversion and Jenkins when the QC server is a SaaS cloud instance? Is there any additional config I should be aware of?
Thanks in anticipation

Hi,
Yes all the users are facing the issue. Please find more details for the issue.
Currently we are upgrading Quality Center 10.0 to 11.0 with HP Enterprise Integration module for SAP applications. The project successfully upgraded from QC 10.0 to 11.0 but there are some error popup for the project for which Application Module and Enterprise Integration for SAP applications Version 2.6 was enabled
Quality Center Details:
HP Application Lifecycle Management 11.00
ALM patch level: 07
Quality Center 11.00 Enterprise Edition
Component     Build
OTA Client     11.0.0.6051
User Interface     11.0.0.6051
WebGate Client     11.0.0.6051
Test Run Scheduler     11.0.0.6051
Execution Flow     11.0.0.6051
Site Administration Client     11.0.0.6051
Extension Version
Enterprise Integration for SAP applications     2.6.0.3232
Sprinter     11.0.0.6051
Application Model     2.6.0.917
Installation Steps followed:-
1.Installed HP ALM
2.Installed Patch Service Pack 2 (Patch 2,3,4)
3.Installed Patch 6
4.Installed Patch 7
5.Installed the Extensions HP Enterprise Integration module for SAP applications using Extension Deployment Tool by following the steps provided in the Addin Page
6.Created new project in HP ALM
7.Login to the project (no issue)
8.Enabled the Project Extensions
9.Login to the project (able to access the project but error message is popup when we access Test plan and Defect module)
Note: There is no error when we access the project for which the HP Enterprise Integration module for SAP applications EI not enabled. QC 11.0 is not integrated with any tools.
Let me know is there any step we missed or we need to do any manual steps we need to do before enabling EI

BPM work spaces integration with Web-Center work spaces

Hi ,
I have a requirement of Integrating BPM work space with WEB-CENTER SPACES.
Can any one suggest me how to integrate....?
Thanks & Regards
PRAMILA PADAM

Ok, Figured out the issue,
Values in the OAF_AXF_CMD_PARAMS table was not matching with the actual attributes on the OAF pages. The four values
Entity Name, Primary Key, View Object and Attributes are to be entered for each page where we are intending to have the MA button.
Thanks,
Rajiv.

How to debug a BPM process

Like NetBeans how to debug a BPM process in Jdeveloper with breakpoint,step by step?

As per Shay's inputs, can you post the question in BPM forums?
Business Process Management Suite
Thanks,
Navaneeth

How to debug a BPM process In Jdeveloper10g or Jdeveloper11g

Like NetBeans how to debug a BPM process in Jdeveloper with breakpoint,step by step?

As per Shay's inputs, can you post the question in BPM forums?
Business Process Management Suite
Thanks,
Navaneeth

Ale master data scenario integration with non sap syetem i.e seebeyound

hi
we have a business process scenario integrating with non sap system (i.e seebeyound)
action code      itemnumber    plant code
a(add)          material1     plant 2
d(delete)       material 3    plant 6
etc
we have upto one million materials assigned to 300 plants
we have to send all the above data to non-sap system (see beyound)
should we go for a custom idoc and setup the rfc configuration for the two sytems.
or can you please help how to go for this scaneriao

this is not one time.it is on daily basis.
please look at this scenario.what i need is how should i go for ale/idoc scenario for this one
Business case for Heiler Part/Plant Interface:
A key function of the Heiler PBC tool is to provide users a choice
between a "Global Catalog View" (e.g. all parts in the catalog) or a
"Local Catalog View" (e.g. the subset of parts in the catalog that have
a Material Master established for the user's plant in SAP). The "Local
Catalog View" is the default condition and encourages users to procure
parts that are on contract for their plant and potentially already
stocked as an inventory item at their plant. Parts that are not in a
user's "Local Catalog View" can only be procured as a spot buy purchase
order, requiring processing by a buyer.
The new Part/Plant interface is required in order for the Heiler PBC
tool to provide this "Local Catalog View" function. The Heiler
Part/Plant table will document what plants in SAP have a Material Master
record established for each part. SAP will maintain the Heiler
Part/Plant table using this interface. When a user performs a part
search in the Heiler PBC tool, the Part/Plant table determines if a part
is included in the user's "Local Catalog View".

Problem integrating BPM Process Spaces with Webcenter Spaces PS5

Good Day!
I have currently installed a fresh build of Webcenter 11.1.1.6 stack in a single domain which contains:
1.)     UCM
2.)     Spaces
3.)     SOA with BPM
After configuring process-portal-install.properties, I have run the ant –f install.xml command which will integrate Process Spaces into Webcenter Spaces.
The problem currently I am facing is that after seeing the process spaces link in Webcenter Spaces, I am also being redirected to internal problem and seeing the logs, I have something like:
[2012-06-11T16:28:43.918-07:00] [WC_Spaces] [ERROR] [] [oracle.webcenter.webcenterapp.internal.view.webapp] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 81caeefafba8cb1a:-15b44550:137ddb9ada0:-8000-000000000000022e,0] [APP: webcenter#11.1.1.4.0] [[
oracle.adf.controller.ControllerException: ADFC-06002: unhandled exception
at oracle.adfinternal.controller.util.Utils.createAndLogControllerException(Utils.java:208)
at oracle.adfinternal.controller.engine.ControlFlowEngine.handleException(ControlFlowEngine.java:640)
at oracle.adfinternal.controller.engine.ControlFlowEngine.invokeTaskFlow(ControlFlowEngine.java:235)
at oracle.adfinternal.controller.state.ChildViewPortContextImpl.invokeTaskFlow(ChildViewPortContextImpl.java:104)
at oracle.adfinternal.controller.state.ControllerState.createChildViewPort(ControllerState.java:1387)
at oracle.adfinternal.controller.ControllerContextImpl.createChildViewPort(ControllerContextImpl.java:78)
at oracle.adf.controller.internal.binding.DCTaskFlowBinding.createRegionViewPortContext(DCTaskFlowBinding.java:474)
at oracle.adf.controller.internal.binding.DCTaskFlowBinding.getViewPort(DCTaskFlowBinding.java:392)
at oracle.adf.controller.internal.binding.TaskFlowRegionModel.doProcessBeginRegion(TaskFlowRegionModel.java:164)
at oracle.adf.controller.internal.binding.TaskFlowRegionModel.processBeginRegion(TaskFlowRegionModel.java:112)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.doRegionRefresh(TaskFlowRegionController.java:241)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:119)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3204)
at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2876)
at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.prepareModel(PageLifecycleImpl.java:115)
at oracle.adf.controller.faces.lifecycle.FacesPageLifecycle.prepareModel(FacesPageLifecycle.java:359)
Caused by: oracle.adf.controller.ControllerException: ADFC-02001: The ADF Controller cannot find '/WEB-INF/processApplicationsTaskflow.xml'.
at oracle.adfinternal.controller.metadata.provider.MdsMetadataResourceProvider.getMetadataObjects(MdsMetadataResourceProvider.java:473)
at oracle.adfinternal.controller.metadata.provider.MdsMetadataResourceProvider.loadUnmutalbeMetadataResources(MdsMetadataResourceProvider.java:372)
at oracle.adfinternal.controller.metadata.provider.MdsMetadataResourceProvider.getResources(MdsMetadataResourceProvider.java:183)
at oracle.adf.controller.internal.metadata.MetadataService.getTaskFlowDefinition(MetadataService.java:239)
at oracle.adfinternal.controller.activity.TaskFlowCallActivityLogic.findTaskFlowDefinition(TaskFlowCallActivityLogic.java:1072)
at oracle.adfinternal.controller.activity.TaskFlowCallActivityLogic.invokeTaskFlow(TaskFlowCallActivityLogic.java:224)
at oracle.adfinternal.controller.engine.ControlFlowEngine.invokeTaskFlow(ControlFlowEngine.java:217)
... 92 more
Caused by: oracle.mds.core.MetadataNotFoundException: MDS-00013: no metadata found for metadata object "/WEB-INF/processApplicationsTaskflow.xml"
at oracle.mds.core.MetadataObject.getBaseMO(MetadataObject.java:1331)
at oracle.mds.core.MDSSession.getBaseMO(MDSSession.java:3200)
at oracle.mds.core.MDSSession.getMetadataObject(MDSSession.java:1190)
at oracle.mds.core.MOResolver.getMetadataObjects(MOResolver.java:218)
at oracle.adfinternal.controller.metadata.provider.MdsMetadataResourceProvider.getMetadataObjects(MdsMetadataResourceProvider.java:421)
... 98 more
I would like to ask if there is a support link or solution to this problem I am facing such that I may able to see BPM Process Spaces in Webcenter Spaces.

Hi Jeff,
Its looking that BPM was not correctly configured for some reason, exact root cause could not be pinpointed. You can try following two things:-
1. Run the following ant command and restart the Admin and managed servers
ant -f install.xml post-install -DpiArgs -importGSOnly
2. If Oracle BPM and WebCenter have been configured in different domains, configure Trusted Domain Credentials in both the Oracle BPM and WebCenter domains.
http://docs.oracle.com/cd/E23943_01/web.1111/e13707/domain.htm#SECMG404
If issue is still there, you can open the SR with Oracle and also have a look on following bug that is released on 24-May-2012.
Bug 13894890 : [SUP] ERROR NO METADATA FOUND FOR METADATA OBJECT "/WEB-INF/PROCESSAPPLICATIONST
Regards,
Imran

Dynamic Filename in BPM process (SOAP with attachm. and PayloadSwapBean)

Hello together
I have the following BPM process:
1. IDoc=>WebServiceRequest
2. WebServiceResponse (payload) => IDoc
3. WebServiceResponse (attachment) => File
XI receivs an IDoc an map it to an WebService. The Webservice is called by XI and we receive the WebServiceResponse including a PDF attachment.
The challenge is to store the PDF attachment with a dynamic filename from the payload of WebServiceResponse.
We use the PayloadSwapBean to change the payload to the PDF attachment. But then we are not able to access the required information on the original WebService-XML-Response via variable substitution.
Is there a solution in the standard or have we to use a custom adapter module?
Thx
manuku

Hi Jayasimha,
We can do this by "Adapter Specific Message Properties" of ur comunication channels.
1.If u want to keep the output filename same as input filename, no need to use the UDF. only the 'adapter specific parameters' in both sender n receiver file adapter will do that.
In case if u want to get the filename inside our mapping we have to create a user defined function
which will return the filename and map it to one of our XML tags. 2nd point gives solution 4 that:
2. If u want to generate an output file taking some input from the payload,then u hav to use the UDF.There u hav to populate the name.
Pretty much.... if you set an attribute from the sender side, for example, you can use a UDF and access the particular attribute sent and use it in the mapping. In another example, where no attributes are sent from the sender, you can still actually set a particular attribute, say a filename derived from the payload, using a UDF, and enable the receiver attribute to use it. That's where the UDFs come in - either to get or set particular adapter specific message attributes.
This will be a very helpful blog which solves ur query:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Regards,
Vinod.

BPM integration with BRM

Hi All,
I am looking for a blog for complete scenario which includes business rules used in BPM,that is ,complete STEP BY STEP blog for BPM integration with BRM.Searched a lot but finding either BPM or BRM or BRM already created without mentioning steps and imported in BPM process.
Can you help me with a complete blog for BPM integration with BRM STEP BY STEP blog?
Thanks in advance

Hi,
Please check if the below articles are useful
http://scn.sap.com/thread/3446620
http://scn.sap.com/docs/DOC-47066
http://scn.sap.com/docs/DOC-4588
Regards,
Sriram

BPM integration with BRM step by step

Hi All,
I am looking for a blog for complete scenario which includes business rules used in BPM,that is ,complete STEP BY STEP blog for BPM integration with BRM.Searched a lot but finding either BPM or BRM or BRM already created without mentioning steps and imported in BPM process.
Can you help me with a complete blog for BPM integration with BRM STEP BY STEP blog?
Thanks in advance

Hi,
Please check if the below articles are useful
http://scn.sap.com/thread/3446620
http://scn.sap.com/docs/DOC-47066
http://scn.sap.com/docs/DOC-4588
Regards,
Sriram

BPM Payload bind to adf query panel with table

hi guys,
i have a requirement to process all result row in the table to my bpm process.
i have a bpm taskflow and already defined the payload xml.
in the taskflow UI, i hv a adf query panel with table from a criteria View object.
how can i bind the search result to the bpm payload ?
i tried to bind it directly, but it turns out error.
or do you hv a better approach to this requirement, so i can add/remove row in table dynamically ?
i use bpm 11.1.1.6
thanks before.

Could you give some more details ?
Do you require that all the rows in the ADF based results table are passed on to the BPM payload ?

Integration with Process Manufacturing

We are looking at upgrading Financials and Process Manufacturing to R11i early next year. Currently we use i2's Rhythm Factory Planner but are interested in the APS developments.
Which APS modules are available for use with OPM? Also where can I get an indicication of the cost per module?

I've got this info from Oracle. Hope this helps. OPM is integrated with APS now.
1. It uses the advanced planning engine and global ATP.
2. Demand Planning integration is in the works.
3. Manufacturing Scheduling is purely a discrete option and not needed for
OPM.
The pricing of APS for OPM is the same as the standard APS and is priced by Cost of Goods Sold. You may get the price details from your local Oracle sales.

BW Authorizations - Query variable with processing mode as "customer exit"

Hi,
Iam new to BW authorizations and have not yet worked on customer exit before. I was going through the documentation at various sites but I could not get the end to end description on how the query process( when using a variable for an InfoObject) works in case of customer exit.
Let's assume that I am using a query variable with processing mode as "customer exit" and at the exit I write some code to extract user's authorizations from a z table. if this is the case, then when an end user runs a query,how will the the system know what value needs to be filled in the variable for the requesting user. Are the user details also sent to the code along with the query variable? If so how. If I mis-understood the process then forgive me and let me know the correct process.

Hi!
welcome to SDN!
customer exit variables need programing by user. so if you create a customer exit variable, you got to right a program which extracts values into this variable. we can do what ever we want in program, SAP will not deal anything ´with customer exits.
with regards
ashwin
PS n: Assigning point to the helpful answers is the way of saying thanks in SDN. you can assign points by clicking on the appropriate radio button displayed next to the answers for your question. yellow for 2, green for 6 points(2)and blue for 10 points and to close the question and marked as problem solved. closing the threads which has a solution will help the members to deal with open issues with out wasting time on problems which has a solution and also to the people who encounter the same porblem in future. This is just to give you information as you are a new user.

BPM process query integrating with EP

Similar Messages

Maybe you are looking for