BPM: Retrieving info utilizing a JDBC in my BPM process
I receive an IDOC from R/3 which I want to evaluate and send to a third party system(RNIF adapter). Upon receiving the message I transform the data and then attempt to send the required fields through a JDBC adapter to retrieve needed information from a SQL database. This information will then be used to determine what leg of the BPM process it will travel.
My issue is how to configure the send step for connecting to the SQL database using a JDBC adapter.
Mode: Synchronous
Interface: mi_read_sql_abstract
Request_Messsage: cwf_select
Response Message: cwf_info
Receiver From: Send Context
How do I setup the Receiver Determination and Receiver Agreement in the Directory so the process can connect to the database and send the response message? Both, cwf_select and cwf_info, point to Message Interfaces that are defined as Abstract Asynchronous.
Thanks,
Audra
Audra,
Receiver determination :
Sender Service :BPM
Sender Interface: Synchronous interface
Configured receivers : target business system[SQL]
Interface Determination:
Sender Service : BPM
Sender Interface :Synch interface
Receiver service:target business system[SQL]
Inbound Interface :Synch interface
Receiver agreement:
Sender Service : BPM
receiver servcie:target business system[SQL]
receiver interface:Synch interface
receiver communication channel : receiver jdbc adapter
Best Regards,
raj.
Similar Messages
-
Can BPM communicate with FTP and JDBC Adpater??
Hello All Experts,
I have seen a scenario FILE TO RFC TO FILE using BPM, where BPM (integration process) is having a Synchronous communication with RFC and then sends the response to FILE.
SO i just want to ask, can i use other adpater(FIle or JDBC) in BPM for synchronus communication
Plz help.
Thanks and regards,
Vanita JainRaj,
Let me explain my scenario clearly...
I just want to transfer a selected records from database to other system as a file and once that file is gets created than only i have to update the file-name field in database otherwise not. because there may be case when file is not gets created on other system.
so i had created a BPM which receives a records from JDBC adpater asynchronously and then send it to other system for file creation synchronously and then BPM sends a response to JDBC adapter for file name update.
But my scenario is not working, as you said FTP adpater can't be use for synchronous communication.
as Abhishek said i can use Transport acknowledgement option,but am not aware of how to implement this.
Plz help and give example(if possible) ........if you can.
Regards,
Vanita -
Displaying BPM Song Info on 2nd Generation nano
Is there a way to see the iTunes BPM column info on the 2nd G nano?
As far as I know, you can't.
-
Best program for mac to retrieve info off an old Hard drive?
What is the best program for mac to retrieve info off an old Hard drive? I have the raw Hard drive in an enclosure and plugged in, but it will not read files...any past experiences? I have been looking at Data Rescue 4 and Recuva thru wondershare. Anything helps.
thanxVolume is too much for disk utility
-
one of my calendars disappeared off both my desktop and iphone. how do i retrieve info. that was on calendar? help!!!
Hi skjcm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/TS3999
Cheers,
- Judy -
BPM Idoc collection without calling the mapping in BPM
Hi Expert,
I have an IDOC to file scenario in which source side I have to collect multiple IDOC and map it to a single file .I am achieving it through BPM . at present I am using one multimapping and calling this mapping in the BPM under transformation step its working fine but due to some constraint , Now I want to achieve it using BPM but without calling the Mapping in the BPM i.e I don't want to use Transformation step in the BPM. Is it possible ????
Regards,
SaurabhHi Saurabh,
If that is the case it is preferable to collect the IDocs in ECC and then send them to XI at one go.
Cheers !
Lokesh -
Hi
We're planning to upgrade our SOA/BPM 11.1.1.6.7 to SOA/BPM 11.1.1.7. I've gone through the certification matrix xls for 11g and also the certification on MOS.
Here is the list of current softwares we have on 11.1.1.6.7 and the required ones for 11.1.1.7. I've few questions in the 4th column. Can anyone help me with those?
Software
Current Release on 11.1.1.6
Supported/Required Release for 11.1.1.7
Comments
Upgrade Installers for 11.1.1.7
n/a
n/a
Do we need to apply the latest bundle patch manually after the upgrade in 11.1.1.7?
Oracle WebLogic Server
10.3.6
10.3.5, 10.3.6
10.3.6.0 is already supported. But we need following patches on top of 10.3.6 for Case Management UI to be runnable from BPM workspace:
Patch 14791221: SU Patch [HLJ3]: TRACKING BUG TO ISSUE WLS PATCH FOR BUG 14642695.
Patch 17190939: SU Patch [HQM5]: TRACKING BUG TO ISSUE WLS PATCH FOR BUG 17052278.
Patch 14526899: SU Patch [KMQW]: TRACKING BUG TO ISSUE WLS PATCH FOR BUG 14306399
Are there any critical patches needed on top of this before proceeding with SOA upgrade?
Oracle Database
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Oracle Database 10.2.0.4+ and later
No Upgrade needed. Just need to run the upgrade installer to upgrade the schemas.
Oracle JDK/JRockit
jrockit-jdk1.6.0_33-R28.2.4-4.1.0
Oracle JRockit: 6u37 R28.3+,6u37 R28.2.5+
Oracle jrockit-jdk1.6.0_45-R28.2.7-4.1.0-linux-x64 available for download.
Are there upgrade installers available to upgrade from 1.6.0_33-R28.2.4.4.1.0 to 1.6.0_45-R28.2.7-4.1.0 JRockit? Or Do we need to have a fresh installation of 1.6.0_45-R28.2.7-4.1.0 before proceeding to run SOA upgrade installer for 11.1.1.7? Can you clarify?
Based on my experience with case management with Sun JDK earlier, Sun JDK 1.7.0_* was required to run case management from BPM workspace. Is JRockit version 1.6.0_45-R28.2.7-4.1.0 compatible enough to run case management in 11.1.1.7?
Thanks,
JahangirAs this is not a FMW Certification issue, I have moved your thread to the SOA Suite Communities to assist you further.
Thanks,
Lisa Fedynich -
How to configure bpm composer and access the projects present in bpm mds re
To access the bpm composer I performed the below mentioned steps: - Installed the standalone weblogic server with soa server configured
- Invoked the bpm composer using the url : http://machine:soa_port/bpm/composer
- Used weblogic and weblogic1 as username and password.
Please let me know whether I am following the correct approach as I am not able to see any options in bpm composer like open project etc, the project menu appears but there are no projects visible.The answer couldn't help us much. I will give you the steps we have followed in detail
We have created a sample customizable BPEL process by selecting a Customizable checkbox in Jdev.
Then,The sample BPEL process is deployed to SOA server from JDeveloper. We could see the deployed BPM process in EM console.
Also the MDS repositories required for customization too are present in EM.
Then We tried accessing the BPM Composer to do some customization on the sample BPEL process deployed. We are able to login to the BPM composer using "weblogic" user.
But the composer displays only the welcome page. There are no other links enabled.
Please let us know How to make a BPEL process customizable using BPM composer.
Also there is an another SOA Composer. When this composer is mainly used?
There is another BPM Workspace console. But we could not login to this using "Weblogic" user though we are able to login in EM, SOA and BPM composer.
Why the login failed uisng "weblogic" user here?What for this console is used? -
BPM - Crate new Transactio - Error when call another BPM
Hi,
I have an XI application with BPMs and the XI with SP8.
The fist BPM has transformations and send steps and calls the second BPM.
In the DEV environment we are applying SP12, now it's possible to disable the option "Create New Transaction" for Send and Transformation.
I need to disable this option because, my application woks with bad performance and use 100% of the workprocess all the time.
So, when I disabled this option, "Send Stets" whose call another BPMs didn't work fine. The transformations steps and send steps to R/3 worked fine.
Does anybody know why send step to another BPM doesn't work when call another's BPMs?
Best Regards,
FernandoInteresting issue. Have never tried it personally and currently working on a SP 16 XI 3.0 system else would have given this a shot.
If you do get an updates on this issue, pl let us know
Regards
Bhavesh -
JDBC Sender channel not processing the messages
Hello,
From yesterday onwards JDBC Sender channel not processing the messages. In CC monitoring it is showing in Green Led and status is functioning. Cahnnel is polling for messages to DB server as per polling interval. But it is not processing the msg's. Under Processing detials for cluster node it is showing only "Processing Started" for each polling interval.
I have done the check in DB server by executing the query in the channel, whether there are any records are exisitng or not. There are 1000+ records.
Previously the parameter "Disconnect from DB after processing each message" was not set. I have set the parameter and activated in Productiion. Still the messages are not processing by channel
What was the problem? How to rectify with this.
Cheers
VeeraCheck in the Visual Admin >Cluster> "LOCKING ADAPTER"
we get a option of Display Locks .Check for an entry with
NAME : $XIDBAD.JDBC2XI
reset the locks and restart the CC ,now it works fine.
Note 1083488 - XI FTP/JDBC sender channel stop polling indefinitely(04/04S) -
Modification of info object to correct the error in process chain.
Hi Gurus,
I'm facing some problem as mentioned below.
I'm loading data by using 5 info packages. Out of these 5 only one info package data has loaded properly the remaining 4 info packages are showing red status in process chain. Even though monitor status is green. When i checked the process chain it is showing error that duplicate data records.
I did analysis and i came to know that due to info object data type the info object Material number and Material group are showing same values. Now I need to correct the data type for those info objects. I've loaded these directly to info cube and to ODS object.
Now can anybody tell me the solution how do we go about to change the data type from Numc to Char. If we change how does it affect in cube as well as in ODS. How do we correct these type of errors when we are in Production system.
Thanks in advance....
Amarnathhi Ravi,
Thanks for your help.
Thanks & regards,
Amarnath.
Message was edited by:
amarnath Reddy -
Async-Sync Bridge without BPM for SOAP WS and JDBC
I heard you can now have async-sync communication outside of BPM by utilizing adapter modules?
My scenarios are:
proxy (async) -> SOAP WS (sync)
proxy (async) -> JDBC (sync)
I will like to capture the synchronous responses in XI and perform some basic error handling.
I read h[File - RFC - File without a BPM - Possible from SP 19.|File - RFC - File without a BPM - Possible from SP 19.] and the release notes for 2004s SP19 and there is no reference to JDBC or SOAP.
tiaHi Megha,
Plz do refer the below links u will get an idea:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a05b2347-01e7-2910-ceac-c45577e574e0
Sync/Async communication in Adapter without BPM (SP19)
Sync/Async communication in JMS adapter without BPM (SP19)
Async/Sync Communication using JMS adapter without BPM (SP 19)
Async/Sync Communication using JMS adapter without BPM (SP 19)
also try this
Sync/Async communication in JMS adapter without BPM (SP19)
File - RFC - File without a BPM - Possible from SP 19.
Collecting IDocs without using BPM
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5059f110-0d01-0010-7c8b-fdc983be70c0
Have a look
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5059f110-0d01-0010-7c8b-fdc983be70c0
HTTP to RFC - A Starter Kit
Sync/Async communication in JMS adapter without BPM (SP19)
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
Do refer this thread:
JDBC Async-Sync bridge does not work
Reward if found useful
Regards,
Vinod. -
Problem in Idoc to JDBC scenario(uses BPM)
Hi
I have a IDoc to JDBC scenario which also uses BPM.
The JDBC adapter has to execute a Stored procedure on Sybase database.
I work on XI3.0 SP14.
When I am sending IDoc to XI it is failing in CALL adapter step.
The error message is "Unable to convert sender service TruckLiftAccountUpdate to an ALE logical system".
However this scenario is working in Production with same settings.But it is not working in Quality and it is giving the above error.
Can any one help me in this.
Thanks in advance.
KPThanks for your quick reply..
All the settings are in place.
Here the Idoc is coming to BPM and BPM cant able to execute the stored procedure.and we are getting the error from BPM to target system.
Here error is unable to convert the sender service(from BPM service) to ALE
logical system.
same settings are there in Production but it is not working in QA.
Thanks in adavnce,
KP -
Error Handling in JDBC Adaptor - Without BPM
Hi friends,
My problem is like this. Scenario is File -> Xi -> JDBC.
here i didn't used BPM at all.
My interface is working fine.
right now i am not doing any error handling for 'Primary key violation, refrential intigrity etc.. '.
if this type errors encountered i going to adapter monitoring and looking out the issue.
Now the client requirment is
whenever this type of errors occured Client should be notified Via email along with error description.
Is there anyway to do this ?Hi Suresh,
You can setup the Alerting framework of XI to trigger alerts. Alert rules can be set to raise alerts in case of JDBC Adapter Errors.
Check these links....
http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Thanks & Regards,
Renjith
An addition to what i just said...You have to be on SP14 for this...
Message was edited by: Renjith Andrews -
How to retrieve info from a MacOs Standard floppy?
How can I retrieve information from a MacOs Standard formatted floppy disk on Snow Lion?
I have this collection of old floppy disks that were formatted as MacOs Standard format back in the days. They do hold some files which I'd like to backup on a backup drive.
But, Snow Lion does not read MacOs Standard formatted disks apparently.
So, does anyone know how to retrieve information from MacOs Standard formatted floppy disks?
Thank you!This what I see in ML with my old SmartDisk VST (model# FDUSB-M) floppy drive:
Interesting observations:
1. I was able to add and remove files to the disk.
2. I was not able to erase the disk with Disk Utility. It returned an error.
3. Disk Utility did not offer the HFS+ format option, only FAT32 and ExFAT.
4. I could only find 1 floppy in my house so it could be partially defective.
Maybe you are looking for
-
How exactly do "most" Flex developers do this nowadays? I'm coming from Flex 3 with a lot of experience in Flex Builder 3, where "Design View" and doing basic visual customizations were a no-brainer. Does anyone even use Design View anymore? (Plea
-
Hi Gurus, What is the Difference Between Leading Ledger and Non-Leading Ledger conecpt in New Gl concept. regards JK
-
Error installing Power Query - Wrong edition of MS Office
Hello Support, I am trying to install power query but it shows an error msg. I have checked everything but still shows an error msg. 1) windows 8.1 - 64 bit 2) office 2013 - 32 bit (home and small business) I had downloaded power query 32 bit but whi
-
Requirement: Sales target Every month a new sales target is given to each customer for promoting the sales. This sales target is based on customer and material group. In below example represents the sales target of A.V international customer. Ex: c
-
I receive the below error when imprting an .eex file .... please help C:\Documents and Settings\skarnam\Desktop\WFS Fixed Assets BA.eex:Access is denied trying to modify the Business Area with identifier 'WFS_Fixed_Assets' C:\Documents and Settings\s