BPMN supported version in BPM Studio 10.3.1

Hi all,
can someone tell me what's is the BPMN version supported in BPM studio version 10.3.1 ?
strangely enough i've not been able to find this info
thanks
-BR
J.

Hi,
Oracle BPM 10g supports BPMN 1.1. Although BPMN 2.0 is expected to be finalized this summer, it is not out yet.
Things added in Oracle BPM 10g to enhance BPMN support included:
1. improved graphics on icons
2. renamed activities to adhere to the standard (Split-N -> Multiple, Notification Wait -> Message Wait, Nofication -> Send Message)
3. new activities (Timer and Or Split)
4. improved horizontal roles
Up for debate on their usefulness, but about the only BPMN feature that is missing is the concept of Pools.
Hope this helps,
Dan

Similar Messages

Sun Studio (12,1) is unable to find a supported version of the Netbeans IDE

Hi all,
We're working on upgrading both the hardware and software on our application currently, and part of this involves upgrading our compiler to Sun Studio 12.1. I downloaded
SunStudio12u1-SunOS-SPARC-pkgs-ML.tar.bz2
from the Sun website and we installed it into the following location on our server:
/opt/compiler/sunstudio12.1
I successfully compiled all my code using the compiler, however, when I try to launch the debugger by typing ./sunstudio in the 'bin' directory, I get the following error:
{opt/compiler/sunstudio12.1/bin}./sunstudio
Sun Studio is unable to find a supported version of the NetBeans IDE.
Sun Studio requires a NetBeans IDE version 6.5.1 with NetBeans C/C++ module (cnd
2) enabled.
Sun Studio looks for a valid NetBeans IDE installation in the following order:
1) Location specified with --netbeanshome command line option
2) At /opt/compiler/sunstudio12.1/netbeans
I have seen references to executing 'prepare_system' on forums while I was trying to investigate this, but when our sys admin folks try to execute the command, it does not work (command not found). They've mentioned that they expected a prepare_system script in the directory where we untarred the downloaded sun studio tarfile, but it is not there:
drwxrwxr-x 4 59001 staff 1024 Aug 20 2009 .
drwxr-xr-x 3 yu12 lifecad 1024 Jul 2 09:48 ..
drwxrwxr-x 4 59001 staff 1024 Aug 17 2009 LEGAL
-rw-rw-r-- 1 59001 staff 3985 Aug 19 2009 SS12u1_README-pkgs.txt
-rw-r--r-- 1 59001 staff 5598 Aug 20 2009 SS12u1_README-pkgs_ja.html
-rw-r--r-- 1 59001 staff 4155 Aug 20 2009 SS12u1_README-pkgs_zh.html
-rwxrwxr-x 1 59001 staff 517979136 Aug 6 2009 SunStudio12u1-SunOS-SPARC-pkgs.sh
-rwxrwxr-x 1 59001 staff 11814 Aug 6 2009 install_patches.sh
drwxrwxr-x 5 59001 staff 96 Aug 17 2009 patches
I can see a netbeans directory was created as part of the install, but I'm not sure why sun studio thinks netbeans is not available (afraid my knowledge about netbeans is practically non existent):
{opt/compiler/sunstudio12.1/netbeans}ls -l
total 6062
drwxr-x--- 2 root root 512 Apr 5 11:14 bin
drwxr-x--- 7 root root 512 Apr 5 11:14 cnd2
-rw-rw-r-- 1 root root 5254 Mar 5 2009 CREDITS_ja.html
-rw-rw-r-- 1 root root 5175 Mar 5 2009 CREDITS_pt_BR.html
-rw-rw-r-- 1 root root 4908 Mar 5 2009 CREDITS_zh_CN.html
-rw-rw-r-- 1 root root 5434 Mar 5 2009 CREDITS.html
-rw-rw-r-- 1 root root 1717 Mar 5 2009 DISTRIBUTION.txt
-rw-rw-r-- 1 root root 0 Aug 6 2009 dummy
drwxr-x--- 2 root root 512 Apr 5 11:14 etc
drwxr-x--- 7 root root 512 Apr 5 11:14 gsf1
drwxr-x--- 6 root root 512 Apr 5 11:14 ide10
-rw-rw-r-- 1 root root 1845 Mar 5 2009 LEGALNOTICE.txt
-rw-rw-r-- 1 root root 64275 Mar 5 2009 LICENSE.txt
-rw-rw-r-- 1 root root 37141 Mar 5 2009 moduleCluster.properties
drwxr-x--- 7 root root 512 Apr 5 11:14 nb6.5
-rw-rw-r-- 1 root root 15822 Mar 5 2009 netbeans.css
drwxr-x--- 8 root root 512 Apr 5 11:14 platform9
-rw-rw-r-- 1 root root 6141 Mar 5 2009 README_ja.html
-rw-rw-r-- 1 root root 5692 Mar 5 2009 README_pt_BR.html
-rw-rw-r-- 1 root root 5122 Mar 5 2009 README_zh_CN.html
-rw-rw-r-- 1 root root 5155 Mar 5 2009 README.html
-rw-rw-r-- 1 root root 2913280 Mar 5 2009 THIRDPARTYLICENSE.txt
drwxr-x--- 5 root root 512 Apr 5 11:14 websvccommon1
Our server details are:
{opt/compiler}uname -a
SunOS a03714 5.10 Generic_142900-03 sun4v sparc SUNW,T5440
Any advice appreciated on how to get the debugger working. Ideally, I'd prefer not to uninstall / reinstall if at all possible as we're about to start system testing our executables, and I think a reinstall would require more unit teting and delays to our project (yikes!). But any input would be appreciated here.
Thanks,
Brendan.

Hi David,
First off - thanks for the response. I do have some follow up questions if you don't mind though:
1. When you say the install is corrupted, do you suspect
- the file I downloaded from the website either was corrupted, or was not the correct file for my platform
- the procedure used to install the software was incorrect
- something else
2. Is there a logfile that the sun studio install creates which would indicate an error during the installation procedure? I'm sure our admins who performed the install would have shouted if an error was logged... but on the offchance that the installation does not 'shout loudly' for some errors, I'd like to see a log of the error. At a minimum, I'd expect it to say why the install failed, and what we need to modify to ensure a successful install next time 'round.
3. I successfully compiled my code using the C compiler from the install. My unit tests also look good... does this suggest that the install was at least a partial success, and would you suspect that my recompiled executables are reliable, despite the fact that I cannot launch the IDE?
4. Today, one of our admins telnetted to our unix server - not via exceed by the way, but he did try the following test:
- set his display env variable (he knew he would not get a display however)
- executed the sunstudio script
He did not get the netbeans error, and the process appeared to be running (as I mentioned, without a display) until he killed it. I've asked if they can repeat the test using an exceed session. I thought there may be something on his $PATH that I did not have - unfortunately this was not the case (although, he may have access as 'root' to something that I require to launch the IDE). My question is, would you expect this behaviour if the install was corrupted?
Let me know what you think.
Thanks,
Brendan.

OBPM BPM Studio support for SOAP 1.2 based Proxy services (OSB)

Hi,
I tried to import proxy services from OSB (as external resource). The proxy service is based on the SOAP 1.2 WSDL standard. When BPM studio introspective SOAP1.2 based proxy services, it is givng the following warninigs. Bacause of this i am unable to create a service object. Please help.
Regards,
Pandu
Introspecting...
downloading /sbresource?PROXY/RoutingAndMessagingService/proxy/OnRampService
parsing /sbresource?PROXY/RoutingAndMessagingService/proxy/OnRampService
[Warning] unknown tag 'header' from 'http://schemas.xmlsoap.org/wsdl/soap12/'.
[Warning] unknown tag 'header' from 'http://schemas.xmlsoap.org/wsdl/soap12/'.
checking /sbresource?PROXY/RoutingAndMessagingService/proxy/OnRampService
parsing http://localhost:7002/sbresource?PROXY%2FRoutingAndMessagingService%2Fproxy%2FOnRampService%3ASCHEMA%2FSchemas%2Finternal%2Fwsdlmessages%2Futilityservices%2Froutingandmessagingservice%2FRoute
analyzing http://localhost:7002/sbresource?PROXY%2FRoutingAndMessagingService%2Fproxy%2FOnRampService%3ASCHEMA%2FSchemas%2Finternal%2Fwsdlmessages%2Futilityservices%2Froutingandmessagingservice%2FRoute
parsing http://localhost:7002/sbresource?PROXY%2FRoutingAndMessagingService%2Fproxy%2FOnRampService%3ASCHEMA%2FSchemas%2Finternal%2Fwsdlheaders%2FHeaderSchema
analyzing http://localhost:7002/sbresource?PROXY%2FRoutingAndMessagingService%2Fproxy%2FOnRampService%3ASCHEMA%2FSchemas%2Finternal%2Fwsdlheaders%2FHeaderSchema
parsing http://localhost:7002/sbresource?PROXY%2FRoutingAndMessagingService%2Fproxy%2FOnRampService%3ASCHEMA%2FSchemas%2Finternal%2Fwsdltypes%2Fcommon%2FHeaderTypes
analyzing http://localhost:7002/sbresource?PROXY%2FRoutingAndMessagingService%2Fproxy%2FOnRampService%3ASCHEMA%2FSchemas%2Finternal%2Fwsdltypes%2Fcommon%2FHeaderTypes
parsing http://localhost:7002/sbresource?PROXY%2FRoutingAndMessagingService%2Fproxy%2FOnRampService%3ASCHEMA%2FSchemas%2Finternal%2Fwsdltypes%2Fcommon%2FSimpleTypes
analyzing http://localhost:7002/sbresource?PROXY%2FRoutingAndMessagingService%2Fproxy%2FOnRampService%3ASCHEMA%2FSchemas%2Finternal%2Fwsdltypes%2Fcommon%2FSimpleTypes
http://www.michaelpage.com/wsdltypes/common/SimpleTypesv1.0 compiled
http://www.michaelpage.com/wsdltypes/common/HeaderTypesv1.0 compiled
http://www.michaelpage.com/wsdlheaders/Headerv1.0 compiled
http://www.michaelpage.com/wsdlmessages/utilityservices/Routev1.0 compiled
[Warning] The binding 'OnRampServiceSOAP' with type 's2:OnRampServicePort'is unsupported. Components will not be generaded for this binding..
'http://www.michaelpage.com/wsdl/utilityservices/routingandmessagingservice/OnRampServicev1.0/' was parsed.
Analyzing dependecies for module 'WS.OnRampService'...
Analyzing dependecies for module 'WS.OnRampService'...
Analyzing Components
Storing Instrospected Types
Introspection completed. Errors: 0, Warnings: 3.

Pandu,
OBPM 10g doesn't support SOAP 1.2 binding.
Edited by: 4dyomi on Nov 20, 2009 11:41 AM
Edited by: 4dyomi on Nov 20, 2009 11:42 AM

Sun Studio is unable to find a supported version of the NetBeans IDE at the

I'm following the system install instructions in the Grid Compute Utility guide, Appendix A "Building a Local Development Environment" and am getting stuck on step 4, installing sunstudio. I'm running Solaris 5.10 on x86 and can run netbeans IDE without problem. Here is some info, I'm not sure what other system info is relevant:
bash-3.00# which netbeans
/opt/netbeans-5.5.1/bin/netbeans
bash-3.00# which sunstudio
/usr/bin/sunstudio
bash-3.00# sunstudio
Validating NetBeans IDE at: "/opt/SUNWspro/../netbeans-5.5.1"
Sun Studio is unable to find a supported version of the NetBeans IDE at the specified location.
Sun Studio requires a NetBeans IDE version 5.5.1 with NetBeans C/C++ Development Pack version 5.5.1
installed. Sun Studio looks for a valid NetBeans IDE installation in the following order:
1) Location specified with --netbeanshome command line option
2) At /opt/netbeans-5.5.1 location, if exists
3) At /opt/SUNWspro/../netbeans-5.5.1 location, if exists
4) At /opt/SUNWspro/../../netbeans-5.5.1 location, if exists
Please run the System Preparation Tool (prepare_system), if available, to set up your environment.
Any help!?

Did you install NetBeans separately or let Sun Studio installer do it? The latter usually results in working configuration.
I think that NetBeans installation simply doesn't have c++ pack; you can install one following usual NetBeans modules installation path and then re-try starting Sun Studio.
Another option is to uninstall NetBeans and re-install Sun Studio using its installer, which should set up NetBeans properly.

Sun Studio is unable to find a supported version of Java ...?

Gentlemen I need your assistance, I'm trying to install SunStudio, and I get this error.
# /opt/sun/sunstudioceres/bin/sunstudio
Sun Studio is unable to find a supported version of Java.
Sun Studio supports Java version 1.5.0_03 and newer and looks for a valid Java installation in the following order:
1) Location specified with --jdkhome command line option
2) In PATH environment variable
3) At /usr/jdk/latest location, if exists
4) At /usr/java location, if exists
5) At /usr location, if exists.
I'm using FC9, and I have installed the following in Java
# rpm -qa | grep java
libgtk-java-2.8.7-2.fc6.i386
sun-javadb-demo-10.4.1-3.1.i386
cairo-java-1.0.5-3.fc6.i386
sun-javadb-common-10.4.1-3.1.i386
java_cup-0.10-0.k.6jpp.2.i386
libgconf-java-2.12.4-5.fc6.i386
sun-javadb-core-10.4.1-3.1.i386
java-1.4.2-gcj-compat-devel-1.4.2.0-40jpp.110.i386
libvte-java-0.12.1-5.fc6.i386
sun-javadb-javadoc-10.4.1-3.1.i386
libgnome-java-2.12.4-3.fc6.i386
sun-javadb-client-10.4.1-3.1.i386
gcc-java-4.3.0-8.i386
libglade-java-2.12.5-3.fc6.i386
glib-java-0.2.6-3.fc6.i386
java-1.5.0-gcj-1.5.0.0-21.fc9.i386
sun-javadb-docs-10.4.1-3.1.i386
Can somebody help me to see what I'm missing, and how can I point to the right direction?

You have GNU Java 1.5.0. In order to use IDE and Performance Analyzer you need to install SUN Java 1.6.0.
[http://developers.sun.com/sunstudio/downloads/ssx/express_November2008.html|http://developers.sun.com/sunstudio/downloads/ssx/express_November2008.html] :
The Sun Studio package installer, IDE, and Performance Analyzer require Java SE Development Kit (JDK) 6 Update 3 or higher, which can be downloaded from the [Java SE Downloads site|http://java.sun.com/javase/downloads/?intcmp=1281] if the required version is not available on your target platform.

LabVIEW DSP Test Integration Toolkit support for Code Composer Studio version 4

Hi,
I came to know about the LabVIEW DSP Test Integration Toolkit support for Code Composer Studio from the link http://zone.ni.com/devzone/cda/tut/p/id/5839. I would like to know if this works with Code Composer Studio version 4 also. I am using CCSv4 with TMS320C6748 board. If not, can you please tell me if NI has brought out any software that helps in real time data exchange between CCSv4 and Labview?
Regards,
Debarati.

Debarati,
I did some more research into your issue and found out that unfortunately, NI no longer officially supports the DSP Test Integration Toolkit as seen here: http://zone.ni.com/devzone/cda/tut/p/id/5839
I also see that you located our example VI here http://zone.ni.com/devzone/cda/epd/p/id/4311 and that the VI asked you for a .pjt file that you could not locate in CCSv4. Being that we no longer support the DSP Test Integration Toolkit, your next course of action would be to contact TI and inquire what .pjt file corresponds to in the newest version of CCS. I hope TI can be of more help to you with this issue since, as I said before, we no longer support this toolkit.
My apologies,
Larry H
Applications Engineer
National Instruments

Remote JDBC Problem with Oracle BPM Studio

Hi all, i am facing the Remote JDBC Problem with Oracle BPM Studio.
When i configure a Remote JDBC Connection for SQL in BPM Studio, it prompt me an error.
The SQL Connection is configured as following :
External Resource:
Name : MyDS
Type : SQL Database
Supported Types : Remote JDBC
Details:
Database Type : BPM's Oracle Driver Version:10, 11
J2EE : WLS
Lookup Name : MyAppDS
Configuration for "WLS"
Name : WLS
Type : J2EE Application Server
Supported Types : GENERIC_J2EE
Details:
Initial Context Factory : weblogic.jndi.WLInitialContextFactory
URL : t3://localhost:7001
But, when i try to connect to the Database by using this configuration, I will get an Exception.
An exception occurred while getting a resource from a connector.
Detail:The connector [[ MyDS : SQL : REMOTE_JDBC ]] caused an exception when getting a resource.
Caused by: An exception occurred while getting a resource from a connector.
Detail:The connector [[ WLS : J2EE : J2EE ]] caused an exception when getting a resource.
Caused by: javax.naming.NoInitialContextException: Cannot instantiate class: weblogic.jndi.WLInitialContextFactory [[ Root exception is java.lang.ClassNotFoundException: weblogic.jndi.WLInitialContextFactory ]]
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:657)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
     at javax.naming.InitialContext.init(InitialContext.java:223)
     at javax.naming.InitialContext.<init>(InitialContext.java:197)
     at fuego.jndi.FaultTolerantContext.createContext(FaultTolerantContext.java:726)
     at fuego.jndi.FaultTolerantContext.<init>(FaultTolerantContext.java:79)
     at fuego.connector.impl.GenericJ2EEConnector.createInitialContext(GenericJ2EEConnector.java:177)
     at fuego.connector.impl.GenericJ2EEConnector.createStandaloneContext(GenericJ2EEConnector.java:98)
     at fuego.connector.impl.BaseJ2EEConnector.getResource(BaseJ2EEConnector.java:92)
     at fuego.connector.impl.BaseJ2EEConnector.getResource(BaseJ2EEConnector.java:76)
     at fuego.connector.J2EEHelper.getReadOnlyContext(J2EEHelper.java:86)
     ... 12 more
Edited by: user2262377 on Jun 22, 2009 4:01 PM

I guess the weblogic.jar is not included in the studio.
So, i added weblogic.jar (Weblogic 10.3) and wlclient.jar (Weblogic 10.3)
It is working in my simple java code. But, still not working in BPM Studio.
The error logs:
An exception occurred while getting a resource from a connector.
Detail:The connector [OFT_APP_DS:SQL:REMOTE_JDBC] caused an exception when getting a resource.
Caused by: java.lang.Object cannot be cast to java.io.Serializable
fuego.connector.ConnectorException: An exception occurred while getting a resource from a connector.
Detail:The connector [OFT_APP_DS:SQL:REMOTE_JDBC] caused an exception when getting a resource.
     at fuego.connector.ConnectorException.exceptionOnGetResource(ConnectorException.java:88)
     at fuego.connector.JDBCHelper.getReadOnlyConnection(JDBCHelper.java:93)
     at fuego.sqlintrospector.BrowserPanel.connect(BrowserPanel.java:395)
     at fuego.sqlintrospector.BrowserPanel.populateTree(BrowserPanel.java:200)
     at fuego.ui.wizards.ui.CheckTreeBrowser$1.construct(CheckTreeBrowser.java:63)
     at fuego.ui.SwingWorker$2.run(SwingWorker.java:39)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.ClassCastException: java.lang.Object cannot be cast to java.io.Serializable
     at weblogic.iiop.IIOPOutputStream.writeAny(IIOPOutputStream.java:1588)
     at weblogic.iiop.IIOPOutputStream.writeObject(IIOPOutputStream.java:2231)
     at weblogic.utils.io.ObjectStreamClass.writeFields(ObjectStreamClass.java:413)
     at weblogic.corba.utils.ValueHandlerImpl.writeValueData(ValueHandlerImpl.java:235)
     at weblogic.corba.utils.ValueHandlerImpl.writeValueData(ValueHandlerImpl.java:225)
     at weblogic.corba.utils.ValueHandlerImpl.writeValue(ValueHandlerImpl.java:182)
     at weblogic.iiop.IIOPOutputStream.write_value(IIOPOutputStream.java:1963)
     at weblogic.iiop.IIOPOutputStream.write_value(IIOPOutputStream.java:2001)
     at weblogic.iiop.IIOPOutputStream.writeObject(IIOPOutputStream.java:2266)
     at weblogic.jdbc.common.internal.RmiDataSource_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
     at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
     at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

BPM Studio and 64bit OS (Win7)

Hello,
I'm experiencing problems with UI while running BPM Studio on 64bit OS (Win7 Ult).
I know that installation file is for Win 32bit, but certification matrix says Vista x64 is supported (Win7 not, but dont see too big difference).
Problems are with user interface - some stuff does not display, some does not refresh, cant import "easly" projects, etc...
I've also tried to add '-d32' parameter in eclipse.ini or force running Java 32-bit (exclipe.exe -vm ...)
Rgds,
Waldemar Thiel
ps. I wish to try avoid installing BPM Studio in Windows XP Mode...

this seems to be related to eclipse-display driver issues. i've experienced this problem on a thinkpad x201. tried everything, even reinstall win7. this bug can be found in eclipse bugzilla and has been resolved in eclipse version higher than whats used in studio. i raised an sr in oracle metalink, but they did not even understand the problem - despite the links to eclipse bugzilla i sent to them. i got around by installing on a thinkpad t410, also win7/64 it's working there.
solution for this bug: oracle update studio to higher eclipse version.
Edited by: pbirri on Jan 7, 2012 4:04 PM
Edited by: pbirri on Jan 7, 2012 4:06 PM

NullPointerException when compiling an imported .vdx file in BPM Studio

After importing a .vdx (Visio) file containing BPMN 1.2 symbols into BPM studio, I tried to build the project and JDeveloper reported the following cryptic error:
Oct 17, 2012 9:40:26 AM oracle.mds
NOTIFICATION: PManager instance is created without multitenancy support as JVM flag "oracle.multitenant.enabled" is not set to enable multitenancy support.
Oct 17, 2012 9:40:26 AM oracle.fabric.common.wsdl.SchemaManager isIncrementalBuildSupported
INFO: XMLSchema incremental build enabled.
java.lang.NullPointerException
     at oracle.bpm.project.compile.process.ProcessChecker.updateNextDefault(ProcessChecker.java:648)
     at oracle.bpm.project.compile.process.ProcessChecker.updateNextActivityLevel(ProcessChecker.java:562)
     at oracle.bpm.project.compile.process.ProcessChecker.updateNextActivityLevel(ProcessChecker.java:602)
     at oracle.bpm.project.compile.process.ProcessChecker.updateNextActivityLevel(ProcessChecker.java:602)
     at oracle.bpm.project.compile.process.ProcessChecker.updateNextActivityLevel(ProcessChecker.java:602)
     at oracle.bpm.project.compile.process.ProcessChecker.updateNextActivityLevel(ProcessChecker.java:602)
     at oracle.bpm.project.compile.process.ProcessChecker.updateNextActivityLevel(ProcessChecker.java:602)
     at oracle.bpm.project.compile.process.ProcessChecker.setLevelForFlow(ProcessChecker.java:453)
     at oracle.bpm.project.compile.process.ProcessChecker.setNodeContainerActivityLevels(ProcessChecker.java:475)
     at oracle.bpm.project.compile.process.ProcessChecker.checkFlow(ProcessChecker.java:289)
     at oracle.bpm.project.compile.process.ProcessChecker.check(ProcessChecker.java:101)
     at oracle.bpm.project.compiler.ProcessCompiler.compile(ProcessCompiler.java:59)
     at oracle.bpm.project.compiler.ProcessCompiler.compile(ProcessCompiler.java:24)
     at oracle.bpm.project.compiler.ProjectCompiler.compileProjectObject(ProjectCompiler.java:512)
     at oracle.bpm.project.compiler.ProjectCompiler.compileModels(ProjectCompiler.java:288)
     at oracle.bpm.project.compiler.ProjectCompiler.compile(ProjectCompiler.java:177)
     at oracle.bpm.fusion.sca.validator.BPMNComponentValidator.isValidBpmProject(BPMNComponentValidator.java:64)
     at oracle.bpm.fusion.sca.validator.BPMNComponentValidator.validate(BPMNComponentValidator.java:104)
     at oracle.bpm.fusion.sca.validator.BPMNComponentValidator.validate(BPMNComponentValidator.java:82)
     at oracle.soa.scac.bpmn.BPMNComponentValidator.validate(BPMNComponentValidator.java:56)
     at oracle.soa.scac.ValidateComposite.validateComponentTypeServicesReferences(ValidateComposite.java:1038)
     at oracle.soa.scac.ValidateComposite.doValidation0(ValidateComposite.java:502)
     at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:481)
     at oracle.soa.scac.ValidateComposite.run0(ValidateComposite.java:206)
     at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:187)
     at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:179)
My .vdx file -> https://dl.dropbox.com/u/22482565/Drawing1.vdx
My generated .bpmn file -> https://dl.dropbox.com/u/22482565/Drawing10_1111_Default.bpmn
I have no idea why this is happening before, but I noticed that when I changed the *<exclusiveGateway gatewayDirection="Diverging"* to *<exclusiveGateway gatewayDirection="Unspecified"* in the .bpmn file, it works fine. Does this mean there is a defect with the way that BPM Studio imports the .vdx file?

Hi,
i'm having exactly the same problem
Error importing a BizAgi xpdl file into JDeveloper 1.6
I think its a problem with the importer because if you create an simple process with an exclusive gateway the bpmn generated has the atribute with a value of unspecified.

Problems to invoke a secure Web service from Oracle BPM Studio 10.3

Hi all
I'm trying to consume a web service through HTTPS protoloco Oracle BPM Studio v10.3, but I get the following error: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target.
Some help!!
Thanks

Without going into any technical discussion about the code, my first question is what JDK version was used to create this which was imported into the form? Understand that Forms 10 runs on JDK 1.4.2, so if you used any newer JDK version, likely there will be problems.

Error in jdevelper 11g when opening a project exported from bpm studio 10.3

Hello I hope someone can help me with this error, thanks in advance.
I installed soa suite 11G (including ps2) but when i open a project exported from bpm studio 10.3 i have the following error.
"An unexpected severe error has ocurred in jdeveloper"
Performing action JDeveloper Forum[ from oracle.ide.log.MessagePage ]
Performing action About[ from oracle.ide.log.MessagePage ]
Invoking command: [ from oracle.ide.log.MessagePage ]
Performing action Open...[ from oracle.ide.log.MessagePage ]
Performing action Open...[ from oracle.bpm.fusion.ui.editor.FusionEditor ]
Performing action Open...[ from oracle.ide.ceditor.CodeEditor ]
Performing action Close All[ from oracle.ide.ceditor.CodeEditor ]
Performing action Import...[ from oracle.ide.navigator.ApplicationNavigatorWindow ]
Jul 15, 2010 1:36:03 PM oracle.bpm.project.io.serializers.model.bpmn.BPMN20Loader load
SEVERE: unexpected element (uri:"http://www.wfmc.org/2004/XPDL2.0alpha", local:"Package"). Expected elements are <{http://xmlns.oracle.com/bpm/OracleExtensions}Annotations>,<{http://xmlns.oracle.com/bpm/OracleExtensions}AttributeExpression>,<{http://xmlns.oracle.com/bpm/OracleExtensions}BooleanFeature>,
......................... .... >
javax.xml.bind.UnmarshalException: unexpected element (uri:"http://www.wfmc.org/2004/XPDL2.0alpha", local:"Package"). Expected elements are <{http://xmlns.oracle.com/bpm/OracleExtensions}Annotations>,<{http://xmlns.oracle.com/bpm/OracleExtensions}AttributeExpression>,<{http://xmlns.oracle.com/bpm/OracleExtensions}BooleanFeature>,
<{http://www.omg.org/bpmn20}userTask>

Hi,
I have the same error. Please if you have the solution or any workaround, i 'll very appreciate if you post it here
Thanks in advance!

SQL Server 2008 R2: which version of Visual Studio do I need to keep database projects and SSIS projects in the same solution

I need to build a solution containing a database project and an integration services project for SQL Server 2008R2. Apparently, the subset of Visual Studio tools that comes with SQL Server 2008R2 does not include database projects and does not have
Team Foundation Server support. Because of those limitations, I am trying to determine which version of Visual Studio will allow me to:
1. Build a single solution that includes both a database project and an Integration Services project
2. For the database project, be able to import a database schema from an existing SQL Server 2008 R2 database, do schema compares and update the project from the database and vice versa
3. For the Integration Services project, be able to deploy the packages to SQL Server Integration Services on SQL Server 2008 R2 (that is, to the msdb database).
4. Use Team Foundation Server for source control of the whole solution, including both project types.

Hi G Britton,
To build a solution containing a database project and an integration services project for SQL Server 2008 R2 and use Team Foundation Server for source control.
You can choose to install Visual Studio 2008.
And as you want to utilize Schema compare and/or Data compare functionalities in Visual Studio, you will need to install the
Visual Studio Team System 2008 Database Edition or Visual Studio Team System 2008 Team Suite.
In addition, for Visual Studio issues, I would like to recommend you post the question in the
Visual
Studio forums to get better support.
Reference:
Team Foundation Version Control
Compare and Synchronize Database Schemas
Interoperability and Coexistence (Integration Services)
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Problem while configuring OSB External Resource in BPM Studio

Hi
I have just started using the BPM Studio 10.1.3. I want to invoke my Oracle Service Bus proxy services from one of the activities in the BPM Process flow.
I created an external resource of type Oracle Service Bus and while trying to catalogue the OSB Component I found that only my WSDL Web Service proxy services with http transport protocol are available to be catalogued. I couldnt find the proxy services of the type Messaging Service, Any SOAP Service, Any XML Service created on Oracle Service Bus.
Am I missing anything in the configuration or is it that BPM Studio does not support these protocols(jms,mq etc).
Also, in the Studio Reference there is a mention of Oracle BPM(native) transport that BPM supports for cataloguing OSB Components apart from http and https.
What is this protocol and how and where can i configure the same to help me catalogue the other OSB proxies?

Hi
I have just started using the BPM Studio 10.1.3. I want to invoke my Oracle Service Bus proxy services from one of the activities in the BPM Process flow.
I created an external resource of type Oracle Service Bus and while trying to catalogue the OSB Component I found that only my WSDL Web Service proxy services with http transport protocol are available to be catalogued. I couldnt find the proxy services of the type Messaging Service, Any SOAP Service, Any XML Service created on Oracle Service Bus.
Am I missing anything in the configuration or is it that BPM Studio does not support these protocols(jms,mq etc).
Also, in the Studio Reference there is a mention of Oracle BPM(native) transport that BPM supports for cataloguing OSB Components apart from http and https.
What is this protocol and how and where can i configure the same to help me catalogue the other OSB proxies?

Remote JDBC problem while setting up it with BPM Studio 10.3

Hi
I am trying to use the Remote JDBC for SQL Connection to Database with Oracle BPM Studio.
When i configure a Remote JDBC Connection for SQL in BPM Studio, it prompt me an error.
Step 1: Create a new external resource
Name: erJavaLibrary
Type: Java Class Library
Jar libraries: weblogic.jar
     wlclient.jar
Step 2: Create a new external resource
Name: erWebLogic
Type: J2EE Application Server type
Initial Context Factory: weblogic.jndi.WLInitialContextFactory
URL: http://192.168.1.32:7001
Principal: weblogic
Credentials: *******
Step 3: Create a new external resource
Name: erSQLjdb
Type: SQL database
Supported Types : Remote JDBC
Database Type : BPM MS SQL Server 2005
J2EE : erWebLogic
Lookup Name : TestBPMDS
Step 4: Creating a new catalog modulo for database component
Select Catalog Component, and then select SQL
Specify which configuration: erSQLjdbc
Exception error:
weblogic/security/subject/AbstractSubject
Caused by: weblogic.security.subject.AbstractSubject
java.lang.NoClassDefFoundError: weblogic/security/subject/AbstractSubject
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at fuego.jndi.FaultTolerantContext.createContext(FaultTolerantContext.java:726)
at fuego.jndi.FaultTolerantContext.<init>(FaultTolerantContext.java:79)
at fuego.connector.impl.GenericJ2EEConnector.createInitialContext(GenericJ2EEConnector.java:177)
at fuego.connector.impl.GenericJ2EEConnector.createStandaloneContext(GenericJ2EEConnector.java:98)
at fuego.connector.impl.BaseJ2EEConnector.getResource(BaseJ2EEConnector.java:92)
at fuego.connector.impl.BaseJ2EEConnector.getResource(BaseJ2EEConnector.java:76)
at fuego.connector.J2EEHelper.getReadOnlyContext(J2EEHelper.java:86)
at fuego.connector.impl.BaseRemoteConnector.getContext(BaseRemoteConnector.java:99)
at fuego.connector.impl.BaseRemoteConnector.getReferencedObject(BaseRemoteConnector.java:114)
at fuego.connector.impl.BaseRemoteConnector.getReferencedObject(BaseRemoteConnector.java:107)
at fuego.connector.impl.RemoteJDBCConnector.getConnection(RemoteJDBCConnector.java:75)
at fuego.connector.impl.RemoteJDBCConnector.getResource(RemoteJDBCConnector.java:145)
at fuego.connector.impl.RemoteJDBCConnector.getResource(RemoteJDBCConnector.java:129)
at fuego.connector.JDBCHelper.getReadOnlyConnection(JDBCHelper.java:90)
at fuego.sqlintrospector.BrowserPanel.connect(BrowserPanel.java:395)
at fuego.sqlintrospector.BrowserPanel.populateTree(BrowserPanel.java:200)
at fuego.ui.wizards.ui.CheckTreeBrowser$1.construct(CheckTreeBrowser.java:63)
at fuego.ui.SwingWorker$2.run(SwingWorker.java:39)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.ClassNotFoundException: weblogic.security.subject.AbstractSubject
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
... 24 more

Solution procedure:
1. Create the wlfullclient.jar file in weblogic environment:
It is documented in: http://download.oracle.com/docs/cd/E12839_01/web.1111/e13717/jarbuilder.htm#BABCGHFH
2. Add the wlfullclient.jar file as external resource.
3. Create the Remote JDBC data source configuration

Problem printing PDF from BPM Studio ?

I'm using JasperReports to try to print a PDF from BPM Studio 10.3.2
I have tried many ways but always get the same problem:
Caused by: com.lowagie.text.pdf.PdfWriter.setRgbTransparencyBlending(Z)V
Caused by: java.lang.NoSuchMethodError: com.lowagie.text.pdf.PdfWriter.setRgbTransparencyBlending(Z)V
I added all the needed jars as external resources and catalog them as Java components.
Anyone dealed with this issue before?
Thanks in advance!
/Patricio
ps: sorry for my english, but isn't my native language.

Actually, Word 2013 supports opening of PDF files and creating Word documents from same. The problem is that for anything other than very simple PDF files, the conversion is wonky at best!
The popup mentioned by “bannerman” is definitely not an Adobe Reader message, but possibly an annotation of something generated by JavaScript.
- Dov

BPMN supported version in BPM Studio 10.3.1

Similar Messages

Maybe you are looking for