Brake instructions in two or more lines

Hello:
Do you know how to brake a huge instruction line in two or
more lines?
thank you

You can either hit ctrl-enter when the cursor is at the place
where you
want to put the break, or use the "\" character

Similar Messages

  • Join two or more lines at intersect

    Hi all,
    New to the forums and really only asking here as I haven't been able to find an answer anywhere on the web.
    I am trying to neatly join a 1pt horizontal line and 1pt 45° degree angle line together neatly at the point where they intersect using a single step, see screenshot:
    From this:
    To this:
    Currently the only way of doing this is by adjusting the length of the lines by eye and trying to get them to overlap so that none of the end cap corners protrude which is time consuming...
    I found a script which appears to extrude lines on their current "trajectory" until they collide and then joins them together, see below for example:
    From this:
    To this:
    This would be a perfectly workable option however the script (found at http://illustrator.hilfdirselbst.ch/dokuwiki/skripte/javascript/collision) doesn;t appear to work with CS6 ...
    Your help on this would be greatly appreciated as I have a 68 page brochure to ammend which uses this line style extensively throughout.
    Cheers,
    Patrick

    Patrick,
    Presuming you wish to do it with the help of Illy, Smart Guides being your friends, you can do it in a few simple steps: ShiftClickDrag each of the end Anchor Points (Smart Guides asy intsect/anchor when you are there) and Join.

  • Combine two or more pdf as one pdf from command line

    Hi,
    I have to combine two or more pdf file as one pdf file from command line.
    Is it possible.
    Thanks,
    Ansaf.

    Acrobat has a rich SDK, but not using the command line - declared obsolete by Adobe several decades ago (but taking a long time to die). To be fair, implementing thousands of APIs via command line would make for a rather complicated command line. Use OLE. BUT NOT ON A SERVER!!

  • How can I use more lines to show a field of a row in a report?

    How can I use more lines to show a field of a row in a report? Table A have two columns: (c1 number(5),c2 varchar2(1000)).When I show the table on a report,the column c2 show itself in one row.So the width of html page is very wide.How can I split the field c2 to many lines?
    Thanks for any help.

    I was wondering if an answer was found for this one.
    I have the same problem using the default "Look 4" template for the region. I have found in the CSS file where it is defined and it specifies "nowrap" in the style, which is why the long value is not being split over multiple lines.
    So, my question is, without modifying or creating templates, is there a way to override the "nowrap" attribute from within the item definition? e.g. in the Column Attributes.Column Formatting.CSS Style field. I had some success changing the display properties, such as background colour and font size but I can't seen to override the nowrap attribute!

  • FEBA - How to post two or more transactions at the same time?

    Hi,
        one of our banks sends the statemets with many lines that belongs to the same transaction. We have to post partially one line, and afterwards the other line. Any of you know how to post two lines at the same time from the bank statement?
    Thank you in advance,
    Miguel

    Hi,
    I'm sorry for replying so late.
    The solution I reached was to change the a few things in the standard.
    Now I have a new "context menu item". I select two or more transactions and I right-click the mouse. I select that "context menu item" and the next part of the code adds the total amount of the transactions to look for the correct post for the first transaction. Once posted automatically, the next transaction is posted automatically by the system.
    I hope you understand my English. I've problem with technical FI terms.
    Here you are the code:
    First I added a new contextual menu item:
    CL_FEBAN_ALV_GRID=============CCIMP
    call method e_object->add_function
        EXPORTING
            fcode = 'BS_POST_ITEMS'
            text = text-002.
    *{ INSERT DHTK904078 1
    *--> Miguel Estu00E9vez - 16/06/2008
    * RIPI 24/04/2008 - Conciliaciones
    * Permitir conciliar mu00E1s de un apunte a la vez
        call method e_object->add_function
            EXPORTING
                fcode = 'ZBS_POST_ITEMS'
                text = text-Z02.
    *<-- Miguel Estu00E9vez - 16/06/2008
    *} INSERT
        call method e_object->add_function
            EXPORTING
                fcode = 'BS_KILL_ADVICE'
                text = text-004.
    CL_FEBAN_ALV_GRID=============CCIMP
    when 'BS_POST_ITEMS'.
        call method cl_feban_propagator=>raise_event
            EXPORTING
                i_event = 'POST_ITEMS'
                i_ref_to_item = l_ref_to_item.
    *{ INSERT DHTK904078 2
    *--> Miguel Estu00E9vez - 16/06/2008
    * RIPI 24/04/2008 - Conciliaciones
    * Permitir conciliar mu00E1s de un apunte a la vez
        when 'ZBS_POST_ITEMS'.
            call method cl_feban_propagator=>raise_event
                EXPORTING
                    i_event = 'ZPOST_ITEMS'
                    i_ref_to_item = l_ref_to_item.
    *<-- Miguel Estu00E9vez - 16/06/2008
    *} INSERT
        when 'BS_LOCK_ITEMS'.
            call method cl_feban_propagator=>raise_event
                EXPORTING
                    i_event = 'LOCK_ITEMS'
                    i_ref_to_item = l_ref_to_item.
    CL_FEBAN_PROPAGATOR===========CM001
        when 'POST_ITEMS'.
            raise event post_items
                exporting i_ref_to_item = i_ref_to_item.
    *{ INSERT DHTK904078 1
    *--> Miguel Estu00E9vez - 16/06/2008
    * RIPI 24/04/2008 - Conciliaciones
    * Permitir conciliar mu00E1s de un apunte a la vez
        when 'ZPOST_ITEMS'.
            data: zvalor(1) value '' .
                export zvalor from 'X' to memory ID 'ZFEBA01'.
                raise event post_items
                    exporting i_ref_to_item = i_ref_to_item.
    *<-- Miguel Estu00E9vez - 16/06/2008
    *} INSERT
        when 'LOCK_ITEMS'.
            raise event lock_items
                exporting i_ref_to_item = i_ref_to_item.
    Now, I proceed to calculate the total amount of the selected transactions to look for the correct one to post.
    LNEW_FEBAF01
    *     user parameter
            l_feban_position type c.
            field-symbols: <items> type item_tab_type.
    *{ INSERT DHTK904077 1
    *--> Miguel Estu00E9vez - 16/06/2008
    * RIPI 24/04/2008 - Conciliaciones
    * Permitir conciliar mu00E1s de un apunte a la vez
        data: zvalor(1) value '',
            zkwbtr type kwbtr,
            kwb type kwbtr.
        import zvalor to zvalor from memory ID 'ZFEBA01'.
        if ( zvalor is not initial ).
            if not i_ref_to_item is initial.
                assign i_ref_to_item->* to <items>.
                loop at <items> into h_item.
                    select single kwbtr
                        into kwb
                        from febep
                        where kukey = h_item-kukey and
                            esnum = h_item-esnum.
                            zkwbtr = zkwbtr + kwb.
                endloop.
            endif.
            export zkwbtr from zkwbtr to memory ID 'ZKWBTR'.
        endif.
    *<-- Miguel Estu00E9vez - 16/06/2008
    *} INSERT
        refresh g_picked_items.
        if not i_ref_to_item is initial.
            assign i_ref_to_item->* to <items>.
            loop at <items> into h_item.
                move-corresponding h_item to h_picked_items.
                append h_picked_items to g_picked_items.
            endloop.
        endif.
        submit rfebbu00 and return
            user sy-uname
            with anwnd = r_doc->*-anwnd
            with s_kukey in s_kukey
            with s_esnum in s_esnum
            with buber = g_posting_area
            with mregel = '1'
            with function = 'C'
            with mode = g_mode
            with p_bupro = g_bupro.
    *{ INSERT DHTK904077 2
    *--> Miguel Estu00E9vez - 17/06/2008
    * RIPI 24/04/2008 - Conciliaciones
    * Permitir conciliar mu00E1s de un apunte a la vez
        if ( zkwbtr is not initial ).
            select single kwbtr
                into kwb
                from febep
                where kukey = h_kukey-low and
                    esnum = h_esnum-low.
                    zkwbtr = zkwbtr - kwb.
            export zkwbtr from zkwbtr to memory ID 'ZKWBTR'.
        endif.
    *<-- Miguel Estu00E9vez - 17/06/2008
    *} INSERT
        refresh s_kukey.
        refresh s_esnum.
        clear h_kukey.
        clear h_esnum.
    endloop. "loop over all picked items
    call function 'CUSTOMIZED_MESSAGE'
        EXPORTING
            i_arbgb = 'NEW_FEBA'
            i_dtype = '-'
            i_msgnr = '110'.
    RFEBBU00
    * original transaction currency provided and posting area = 2.
            ftclear-selvon = febep-fwbtr. "INSERT - mpEURO
        ENDIF. "INSERT - mpEURO
        CONDENSE ftclear-selvon NO-GAPS.
    *{ INSERT DHTK903977 1
    *--> Miguel Estu00E9vez - 16/06/2008
    * RIPI 24/04/2008 - Conciliaciones
    * Permitir conciliar mu00E1s de un apunte a la vez
        data: zkwbtr type kwbtr.
        import zkwbtr to zkwbtr from memory ID 'ZKWBTR'.
        if ( zkwbtr is not initial ).
            ftclear-selvon = zkwbtr.
            clear zkwbtr.
        endif.
    *<-- Miguel Estu00E9vez - 16/06/2008
    *} INSERT
    APPEND ftclear.
    ** Begin of comment C5053248
    * perform druck_buzei_ftclear using ftclear-agkon.

  • How sharing an audio stream in two or more Ip telephones?

    Hi everybody.
    I wonder if you can make a call in which two or more people can listen to the conversation without using the functionality of the conference or the contact center, in other words, two or more IP phones have the functionality to take the call and listen to the conversation.
    analog lines similar to accounts in which a line with several phones and all phones that are connected to it can hear the conversation.
    I hope you understand me
    regards

    Hi Mauro,
    You can use "Shared Lines" with Barge
    Look for "Single Button Barge"  to simplify the user experience.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_5_1/ccmfeat/fsbarge.html#wp1034920
    Cheers!
    Rob
    "When it comes to luck you make your own  " 
    - Springsteen

  • Problem-Solution: Help! I'm seeing my iCloud account two or more times in Notes and Contacts!

    Problem: Help! I’m seeing my iCloud account two or more times in Notes and Contacts!
    Solution:
    Open [System Preferences] >
    Open [iCloud] >
    Uncheck [Contacts] for each duplicate iCloud you see in Contacts. ex. My iCloud Account is listed three times = uncheck Contacts twice. The checkbox next to Contacts will fill back in again automatically.
    Uncheck [Notes] for each duplicate iCloud account you see in Notes. (same instructions for Contacts; repeat the steps for each duplicate account)
    Why is this happening?
    It has to do with iCloud Keychain. If you set up iCloud keychain on more than one Mac, it appears to duplicate the iCloud account in each respective application once per Mac. (ex. 2 Macs = 1 Duplicate). The good news is that the above fix appears to be permanent and does not reoccur.

    Minor addition:
    I’m setting up a new Mac—how can I avoid this?
    Turn on iCloud in System Preferences (SP)
    When asked if you wish to set up Mail, Contacts, Calendar, Find my Mac, et al., uncheck all boxes, and click Next.
    Check the “Keychain” box first, then check all other boxes except Contacts and Notes.
    Within a few minutes, these boxes will check themselves.

  • How do I combine two or more pictures into one?

    How do I combine two or more pictures into one?

    I found out how to do what I wanted and I'm giving my steps in hopes that it might help someone else.  I wanted to put several photos from a file onto a new blank image.  This is what I did.
    1.  Create a blank page.    File/New/ Blank File.   Put in the size.  I used 8x10.
    2.  Bring the photo  you want to use into Elements as you always do. It will list along the top next to the blank sheet.
    3.  Choose SELECT (top of screen)/ Select All.
    4.  Choose Edit/Copy   or Command "C"
    5.  Click on the Blank File.   Chose Edit/Paste  or Command "V"
    6.  Click on Image/ Transform or Command "T".  There should be a dotted line around your pasted image.  You can then move and adjust the image to how you want it.  When finished, press the check-mark on lower right of photo.
    7.   Repeat this with all the photos you want on the new blank file.
    8.  You will see on lower right of Elements,  the background layer and as many layers as you have photos.  These layers need to be permanently placed on the background layer. Go to Layers and press Merge Visible.  This will merge all layers to the background.
    9.  Save as and you are done.

  • Choose from List in A matrix for choosing two or more rows at same time

    Hi Friends,
    Actually I m using choose from list to select Items in a row, i can select Two or more rows from the List but while clicking choose it is taking only one value.
    The no of rows are not activated tat i m choosing from list.
    Thanks in advance
    Vivek

    Hi.
    Here is a [link|https://forums.sdn.sap.com/click.jspa?searchID=12829558&messageID=5584893] where are you can find on of my example on CFL on matrix column.
    I think, you need to made some changes in code from these lines...
        Dim oDataTable As SAPbouiCOM.DataTable
        oDataTable = oCFLEvento.SelectedObjects
        for ...
        end for
    Reply if this guideline was usefull for you.
    Bye

  • Error in Muse : Object UID:U6875 has two (or more) owners: U3633 and U3165

    I encoured this error when I wanted to save my work on a Muse site:
    "Object UID:U6875 has two (or more) owners: U3633 and U3165"
    I just want to tell that  since I have upgraded Muse in 2014.3, I had lost all my add ons, and followed the instructions about uninstall and re-install them, but nothing happened, and I have re-install them manually.
    I'am working on a very important project and this failure is a very great problem for me.
    Thank' for help !

    When you launch Muse, is it prompting you as to whether or not you want to "recover unsaved changes?"
    Have you made a large number of changes to your file since the first time you encountered this error? If not, say "No" to recovery. You'll lose all the changes you've made since the last time the file saved without any error, but from there you'll be back up and running. (The problem that triggers this error is in the unsaved changes in the Muse temp files. The underlying cause of this error has been fixed in 2014.3.1, but if your attempting to recover changes made using 2014.3.0 you'll continue to encounter this error.)
    If you've made a large number of changes, you can send us your .muse file and the "Recovery" folder found in:
    Mac: "~/Library/Preferences/com.adobe.AdobeMuseCC.2014.3/Local Store" (copy and paste into the Go > Go To Folder dialog in the Finder)
    Windows: "%appdata%/com.adobe.AdobeMuseCC.2014.3/Local Store" (copy and paste into a file explorer window)
    In both cases above, include everything between the quotes (including the tilde ~ on the Mac) in the copy/paste, but not the quotes themselves.
    We can attempt to fold your unsaved changes into your .muse file, repair the damage that's part of the Recovery data, and return the file to you. Depending on the scope of the changes and the damage, it may take a few days.
    You could send the files to [email protected] along with a link to this thread. If the files are larger than 20Mb you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc. (If you use a service, please include your return e-mail address in the body of the message, since not all services include it in the sharing invite they send.)

  • Hi, iTunes 11.1 don't tell me the duration of two or more tracks from the same album, which iTunes 10. did. How come? It is possible that the new version lacks such a possibility? Thanks

    Hi, thanks to whoever will be able to respond - which the Apple assistance on line in Italy could not do, after minutes of conversation!
    The point is that I cannot see anymore the total duration of two or more audio tracks selected from the same CD, but only the duration of the whole CD.
    With the previous version of iTunes this was very easy, as I simply clicked on the tracks the interested me and I suddenly had the total time.
    It makes no sense that Apple provides a new version which lacks one of the endless options of the program, therefore I hope it's only my faul in not being able to understand what to do. Otherwise, please tell me how can I downgrade and go back to iTunes 10....
    Paul Meadow

    Press CTRL+/
    tt2

  • When do we need two or more sales organization

    Hi Experts,
    In our Enterprise Structure, what factors decide that we need two or more sales organisations. What business requirement makes the decesion of this, any examples may really help.
    Increase of master data is fine but what is the actual reason behind having to restrict with simple org structure ??
    Pre- Thanks
    Denish

    I don't think you need more than one sales area for one country under one company code.
    B'coz most of the things can be handled through or can be differentiated on the bases of Sales Area.
    To add further, its just a virtual organisation entity without any legal boundness.
    All sales related rule regulation for one country should be perferably under umberalla.
    More that one sales org without a valid purpose will just add to complexity of the enterprise structure (simple the better)
    So I don't is any specific requirement of having more than one sales organiation for one country under one company code.
    Untill you need:
    - reporting in more than one Statistics currency.
    - different Sales organisation calendar
    Regards
    JP
    One question for our fellow respondents:
    Whether
    - pricing
    - payment terms
    - target customers/customer base
    - Product line
    - area of operations
    is enhancing the sales org is the only alternative or will add to the complexity?

  • Is it possible to query an Item with two or more conditions in OOB Update List Item WF Step

    In SharePoint Designer 2010, in Workflows, is it possible to give more then one condition when querying items? Let me explain, it is fairly easy to drop Update item in this list step, and say, for example, Update item with ID X. However, if is it possible
    to do something along this lines with OOB steps, Update an item in this list where Title is Equal to "abc" and Modify date no older then 3 days.
    Update: Workflow is started when the item is added to the list. What I would like is to update some fields on this item depending on information in this item and in external list. For example
    Current Item Field 1 has value "abc"
    Current Item Field 2 has value "123"
    Current Item Field 3 has value "456"
    External List has Item with value in Field 1 "123"
    External List has Item with value in Field 2 "abc"
    External List has Item with value in Field 3 "xyz"
    Update Current Item Field 3 with value "xyz"
    In short I would need following query - Update Current_Item_Field_3 with value from External_List_Field_3 where Field 1 is equal to Current_Item_Field_2 and Field 2 is equal to Current_Item_Field_1

    Hi,
    From your description, I understand you want to update list item with workflow based on two or more conditions.
    To resolve your issue, you need to use “If current item field equals value” condition. Use this condition to compare a field in the current item that the list or reusable list workflow is currently running on to a value. Values can be static text, dynamic
    strings, and lookups to variables, context information, or other SharePoint fields. And you can learn more about each condition by referring to the article:
    https://support.office.com/en-in/article/Workflow-conditions-in-SharePoint-Designer-2010-A-quick-reference-guide-d8e33ac7-9336-487f-a60b-388c4ea497ff?ui=en-US&rs=en-IN&ad=IN
    I assume your External List is called “ListB”, and Current List is called “ListA”, You can follow the steps below:
    1. Add “If current item field equals value" for condition that ListB Field2 equals to ListA Field1, then set the second condition “ListB Field1 equal to ListA Field2” as the “Find the List Item” in the “Lookup for Single line of text”
    as the screenshot below:
    2. Add “Update List Item” as the screenshot below for updating Current_Item_Field_3 with value from External_List_Field_3. In addition, you should set “Find the List Item” in “Lookup for Single line of text” same to the “Find the List Item” in step 1:
    In addition, if you have more conditions, you could add “If current item field equals value” condition, and you should set each “Find the List Item” in “Lookup for Single line of text” same to the “Find the List Item” in step 1.
    Regards,
    Rebecca Tu
    TechNet Community Support

  • My ipod has two thin black lines running across the screen. What causes this, and is there a fix?

    Suddenly, my Classic ipod got two narrow, black lines runnings horizontally across the screen.  Will thes eventually go away or is the screen damaged?
    Thanks!

    You can work through the remaining five 5 R's of troubleshooting.
    http://www.apple.com/support/ipod/five_rs/
    It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
    Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
    http://www.apple.com/support/ipod/service/prices/
    Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity.  A third party service will actually replace the damage part for a little less.  Google "iPod screen repair" and you should get a number of results to work with.
    B-rock

  • Billing Comparison on quantities when two or more time slice in bill doc.

    I our project for commercial customer consumption history of past six years is normalized to create a monthly consumption base line (calendar months) this base line is maintained as installation fact and while billing execution this is used to calculate billing  base line
    E.g
    Jan consumption base line u2013 100000 KWH
    Feb Consumption base line u2013 90000 KWH
    Billing period is 15 Jan u2013 15 Feb
    Billing base line is calculated by prorating Jan and Feb consumption base line
    ((100000/31) X 17 ) + (( 90000/28) X 15) = 103053
    Periodic consumption is compared with billing base line and if
    A. Consumption is more than billing base line
          Excess consumption is billed to produce debit $ amount in bill doc
    E.g Billing base line 103053,     Periodic consumption 110000
    Excess consumption = 110000 u2013 103053 = 6947 KWH
    6947 X price = Debit $ amount
    B. Consumption is less than billing base line
    Difference between billing base line and consumption is billed to produce credit $ amount in bill doc
    E.g Billing base line 103053,     Periodic consumption 90000
    Difference = 103053 - 90000 = 13053 KWH  
    13053 X ( -Price) = Credit $ amount
    Comparison between Billing base line and Consumption is done using standard variant IF01
    The problem occurs when bill document has two or more time slice due to price change or change in facts like factor at rate category facts. If  for one time slice consumption is more than billing base line and for other time slice consumption is less than billing base line.
    Variant IF01 does not take into account time slice but it compares quantities considering whole billing period.
    E.G Billing period is 25 Jan u2013 25 Feb
    Price changes on 20 Feb
    Billing base line 25 Jan to 19 Feb u2013 50000
                                20 Feb to 25 Feb u2013 20000
    Billing base line for complete billing period 50000 + 20000 = 70000
    Consumption  (prorated by SAP)     25 Jan to 19 Feb u2013 56000
                                                              20 Feb to 25 Feb u2013 18000
    Total consumption for billing period 56000 + 18000 = 74000
    Consumption is more than billing base line for 25 Jan to 19 Feb time period and consumption is less than billing base line for 20 Feb to 25 Feb time period  but since for complete billing period consumption (74000)is more than billing base line (70000) and this comparison is done by IF01. Control in schema flows to rate which calculate the Debit $ amount for both the time slice which results incorrect calculation of bill amount
    Has anybody encountered similar scenario before. Is there a way out so that individual comparison is carried out for each time slice to pass control to correct rate in schema.
    Thanks
    Amit

    Hi,
    You can use variant quanti02 to determine the difference between the periodic consumption and base consuption.
    first, you calculate the positive difference only ( periodic consumption - base period) by selecting variant control  2  - Negative differences are not updated. You store this into a new QUANT operand called QPLUSDIFF
    then you do the same quanti02 to determine the negative difference, but first you detemine it as positive difference between base consumption and periodic consumption) and multiply the result with factor -1 with quanti09 and store it into a new QUANT operand called QNEGDIFF
    Then you have your negative and positive differences and you can bill them with the corresponding prices in subsequent steps.
    Hope this helps,
    Daniel Toba
    http://www.sap-isu.net

Maybe you are looking for