Branching and lesson completion
Hi Advanced Users,
My clients want very much to know that the students are going through each slide when the complete a lesson. However, in the lesson, some content is presented as both "demo" -- watch how it is done or "try it yourself" where the interactions are added and the user must complete the actions. We have a branching scenario set up so they could do one or the other or both. However, in the TOC, they do not get credit for passing the lesson unless they do both. Is there anyway that we can set up these slide groups "demo" and "try" as optional so that they get credit for doing one or the other? We currently have 3 buttons on the page "Demo", "Try it yourself" or "Continue"
Any advice would be greatly appreciated.
Thanks, Shawn
If you are NOT using Cp6 for this particular course (Cp4,5, or 5.5) then you could use the TickTOC widget to force completion status for both branches when the user gets to the single slide at the end of either branch.
Basically you just place the widget on the slide where both branches merge and enter the slide numbers of all slides on both branches into the widget's dialog. Then regardless of which branch the user takes, they will get completion for the one the did not take as well. The TOC will mark all unvisited slides in the branches as completed, and your user will get 100% completion scored.
If you want to test this out, you can download a trial version of TickTOC widget here:
http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets
More info on how this widget works can be found here:
http://www.infosemantics.com.au/adobe-captivate-widgets/ticktoc
Unfortunately, Captivate 6 users cannot yet use this widget because Adobe made a key change to the way the TOC works in the new version which effectively renders the TickTOC widget useless because it is unable to force the status of slide completion. We are still waiting on Adobe to get back to us with a fix for this issue. Hopefully they will restore the capability in a future update to Cp6 and then we can update TickTOC to work with it again.
Similar Messages
-
Problem with ssh and bash-completion
I and a co-worker are having a weird problem with ssh and bash-completion. We have a local config in .ssh/config with hosts we connect everyday. An example:
host foo
hostname foo.org
user foobar
host foobar
hostname foobar.org
user foobar
When we try to type
ssh foo<tab><tab>b<tab>
the console just freeze and we can't type anything, everything we type is ignored, but after about 30 seconds the host is completed.
This works a some time ago, so some upgrade make this happen. Anyone can reproduce this?quigybo wrote:
Actually thinking about it, rather than using the semi-dodgy fix posted on the bug tracker, we can just test if the daemon is running since we are not on MacOS X. It is cleaner and 250 ms quicker.
--- bash_completion.orig 2010-09-14 05:33:22.000000000 +0930
+++ bash_completion 2010-09-14 05:45:04.000000000 +0930
@@ -1316,10 +1316,12 @@
# contains ";", it may mistify the result. But on Gentoo (at least),
# -k isn't available (even if mentioned in the manpage), so...
if type avahi-browse >&/dev/null; then
- COMPREPLY=( "${COMPREPLY[@]}" $( \
- compgen -P "$prefix$user" -S "$suffix" -W \
- "$( avahi-browse -cpr _workstation._tcp 2>/dev/null | \
- awk -F';' '/^=/ { print $7 }' | sort -u )" -- "$cur" ) )
+ if [ -n "$(pidof avahi-daemon)" ]; then
+ COMPREPLY=( "${COMPREPLY[@]}" $( \
+ compgen -P "$prefix$user" -S "$suffix" -W \
+ "$( avahi-browse -cpr _workstation._tcp 2>/dev/null | \
+ awk -F';' '/^=/ { print $7 }' | sort -u )" -- "$cur" ) )
+ fi
fi
# Add results of normal hostname completion, unless
This is the same test as was used in bash-completion 1.1.
Thanks quigybo, I use your patch, the issue is gone
Why does so many packages depends on Avahi? Maybe make it optdepends is
enough?
my laptop $ pacman -Qi avahi
Required By : gnome-disk-utility gnome-vfs libcups mpd sane -
Unchecked final invoice and delivery completed indicator via BAPI_PO_CHANGE
Hi All,
Is it possible to reset the final invoice and delivery completed indicators of PO in ME23N using BAPI_PO_CHANGE? I need to unchecked the final invoice and delivery completed indicators for all POs in our system that were accidentally updated to delivery completed and final invoice by the user.
Points will be rewared.what i did now is to create a prototype program like the one below:
CONSTANTS c_po TYPE bapimepoheader-po_number VALUE '0040001816'.
DATA: t_poitem-po TYPE bapimepoheader-po_number,
t_return TYPE STANDARD TABLE OF bapiret2,
t_poitem TYPE STANDARD TABLE OF bapimepoitem,
t_poitemx TYPE STANDARD TABLE OF bapimepoitemx,
x_return TYPE bapiret2,
x_poitem TYPE bapimepoitem,
x_poitemx TYPE bapimepoitemx.
t_poitem-po = c_po.
x_poitem-no_more_gr = 'X'.
x_poitemx-no_more_gr = 'X'.
x_poitem-final_inv = 'X'.
x_poitemx-final_inv = 'X'.
x_poitem-po_item = c_po.
x_poitemx-po_item = c_po.
APPEND x_poitem TO t_poitem.
APPEND x_poitemx TO t_poitemx.
CALL FUNCTION 'BAPI_PO_CHANGE'
EXPORTING
purchaseorder = t_poitem-po
no_messaging = 'X'
no_message_req = 'X'
TABLES
return = t_return
poitem = t_poitem
poitemx = t_poitemx.
IF sy-subrc = 0.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
ENDIF.
The program is working if you will mark the PO as delivery completed and final invoice with suppressed output. The problem is i need to do the reverse which is to unmark. I replaced the value of no_more_gr and final_inv from 'X' to space but it is not working. -
How many different computers can I sync my iPod with? My laptop crashed and was completely wiped clean and this was the machine that my iPod synced with so I don't know if it will be counted as a "new" computer when I sync my iPod.
You can sync with onee at a time. Syncing to another will erase the current content.
Copy everything from your backup copy of your old computer to your new one. -
I recently changed my apple ID but my previous apple ID is associated with my icloud account. I'm setting up my new iphone 6 and cannot complete the set up until I can sync my icloud account. Does anyone know how to change the icloud id?
Do the following:
Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iPhone and enter your current password when prompted (even though it prompts you for the password for your old ID). Then go to Settings>iCloud, tap Sign Out and choose Delete from My iPhone when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your phone). -
I have an ipod touch that continues to have a black screen with the white apple on it. It won't shut off and is completely frozen. This happened when we tried to restore it last night. Help please!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I am using FCPX 10.1.3. with Yosemite, and want to duplicate my project and its complete resources to a different hard drive. When I click "duplicate", it automatically duplicates the project in its current hard drive, unlike the previous FCPX that gave you options. How do duplicate to a different hard drive?
Since projects are now stored in events and events are stored in libraries, you need to create a new l;bray on that different drive or open an existing library on that drive. Then duplicate your project and move it to the new library. It will copy the media. Then use the Consolidate Project File command to round up any external assets; there may or may not be any.
Russ -
I have an iphone 4 started the problem saying no service, then when restarting asked to connect to itunes and became jammed in MDU mode, I connect to itunes and clicked on restore, it went through all the steps and nearly completed it gives me an error message saying cannot be restored error -1. Can anybody help me how to restore my iphone. or what to do next, some reseller asked me to go the shop where I bought to replace it for me as this error cannot be restored by any shop. It has to be returned to apple and get it replaced. The warranty already expired and don't know what to do.
Please helpError 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3694#error1 -
IDVD 6 writes lead it, ejects disc, and says complete. whats wrong?
I am using iDVD 6, and am trying to burn a 112 min movie, that i ripped, using handbrake, from a previously burned home movie, but every time it gets to "Writing Lead In" it stops, ejects the disc and says complete.
I click the continue button and it says 'cleaning up' then stops working.
Whats wrong with iDVD? What can I do to fix the problem?
Also, I've had the same problem in the past, with other projects not related to this one.Hi
Just thinking:
What brand of DVDs ?
DVD-R or +R or +/-RW ?
Free space on internal (start-up) hard disk ? (Other hard disks don't count at all)
*Not knowing the origin to Your problem - General approach when in trouble is as follows:*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy: Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
• Program miss-match: iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK - DON’T work under Leopard
• Program miss-match: iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Program miss-match: iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
iDVD pref file resides: Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named:
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
Last resort: from Craig: Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
Yours Bengt W -
My iphone 4 is taking forever to sync...I let it sync all night and only completed about 1/4 of of the songs downloaded. Apps seem to be fine. I have tried restoring it and that didn't do anything. Can someone please help?
how many songs are syncing cuz i only have at most 200 or so and it takes a while so it might be how many songs are syncing to the device
-
Branching and Using the 'Back' button
I have created a branching program that is essentially a
"choose-your-own-adventure." There is no quiz, b/c there is no
right or wrong.
However, when you begin you have three choices. The user
selects one of those choices and goes to Slide A, Slide B or Slide
C depending on their choice. There, they have more choices to make.
From Slide A, their choices would take them to Slide D, Slide E or
Slide F. If they originally chose Slide B, the next set of choices
would also be Slide D, as well as Slide G or Slide H.
(And so on and so forth)
It has been recommended to me that I create a way for users
to simply hit the playbar's "back" button if a user is on Slide D,
and wants to go back to Slide A. However, under my current set-up,
I have two problems: The first: if they simply hit the back button
on the slidebar from Slide D, they will go to Slide C--a
acompletely wrong choice. Secondly, if I put a "Jump to" button on
the page, I actually have to put 2 on (one that will bring them to
Slide A and another that will bring them to Slide B) since you can
get to Slide D from both A and B.
This is a simplified version of my branching, and creating a
button for each page that a slide could go back to isn't feasible
and would probably be more confusing to the user than anything.
Please tell me if this doesn't make sense, or if there is a
way that I can do this.
To see the project and see what I'm talking about, you can go
Here,
and then choose the "Is My TV Ready?" option.
Thank you,
RobHi Rob
Had a look at your program and think it is a great use of
Captivate.
Regarding the "back" functionality, I would recommend to
custom build a button on each slide where you wish to go back. The
reason is that the back button on the play bar will always go back
1 slide in the actual slide sequence and does not take branching
into account i.e. it is a pure linear back 1 button. To make life
easier, I would suggest giving each of your important slides a
unique label, which would then make it a lot easier to:
Specify where the individual "back" buttons would jump to
View the actual branching in teh Branching view of Captivate.
Good luck mate
Andrew -
I was moving bookmarks in safari and 2 complete folders have emptied their contents. The folders are still there. I don't have a working time machine and icloud has caused the relevant folders to disappear from all my machines, iPhone, iPad and iMac as well as thge MacBook Air I was working on. HELP!!!
Hi,
There is NO need to put your whole questing in the "Questing Heather" therefore you can TYPE here. In the Text window as I did to.
Now to your questing:
So, you moved some Bookmarks and now 2 folders are completely empty.
I think that they dropped in a other folder during dragging the Bookmarks.
Did you check ALL of you Bookmark folder if they are there?
If you didn't delete the they have to be still there.
Dimaxum -
Actual finish date and % of completion in Open Ps
I am unable to download Actual finish date and % of completion while downloading project from SAP PS to MS Projects using Open PS.
From SAP Note 1332046:
07.Question: After downloading a project from SAP PS into MS Project, why is the Planned Finish Date in MS Project different when compared to project in SAP PS?
Answer:
When downloading projects with actual data, the actual work that has been completed by an activity element on an activity in SAP is assigned to the resource of a task in MSP.If there is remaining work and if the actual finish date in SAP PS is before planned finish date, the remaining work
will be equally distributed till the planned finish date. If there is remaining work and if the actual finish date in SAP PS is on or after planned finish date, the remaining work will be equally distributed till the forecast finish date for the activity. If a forecast finish date is not
available for the activity, remaining work will be equally distributed till the forecast finish date for the activity element. If a forecast finish date is not available for the activity element also, then MS Project does the allocation of remaining work.That is, if the actual finish is on or
after the planned finish and there is work remaining, while entering confirmations in SAP a forecast finish date should be supplied so that when downloading the project to MSP, the remaining work will be scheduled properly.
I do not understand. If we must mark the final confirmation it shouldn't be remaining work. I still do not understand why my finish dates do not fit with the actual finish date in SAP. -
Revision: 2142
Author: [email protected]
Date: 2008-06-18 15:17:01 -0700 (Wed, 18 Jun 2008)
Log Message:
swfutils: Somehow a Java 1.5 API (Integer.valueOf(int)) slipped into the 30x branch, and has only sporadically caused build problems.
* By "somehow" I mean it was my injection :)
* Apparently this compiles in 1.4.2 on a Mac, go figure? I assume Windows JDK doesn't accept it.
* Replaced it with 'new Integer(int)'
Reviewer: Matt, community folks
Bugs: n/a
QA: no
Doc: no
Modified Paths:
flex/sdk/branches/3.0.x/modules/swfutils/src/java/flash/swf/tools/SwfxPrinter.javaRevision: 2142
Author: [email protected]
Date: 2008-06-18 15:17:01 -0700 (Wed, 18 Jun 2008)
Log Message:
swfutils: Somehow a Java 1.5 API (Integer.valueOf(int)) slipped into the 30x branch, and has only sporadically caused build problems.
* By "somehow" I mean it was my injection :)
* Apparently this compiles in 1.4.2 on a Mac, go figure? I assume Windows JDK doesn't accept it.
* Replaced it with 'new Integer(int)'
Reviewer: Matt, community folks
Bugs: n/a
QA: no
Doc: no
Modified Paths:
flex/sdk/branches/3.0.x/modules/swfutils/src/java/flash/swf/tools/SwfxPrinter.java -
I have downloaded the Creative Cloud and when it finished, it opened up and was completely blank. Nowhere for me to sign in and no apps for me to click to download. I need this to be fixed ASAP. What is the problem here?
BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html
Maybe you are looking for
-
What is the formula for finding Pythagorean integer triples? For ex: 3 4 5 is a triplet. How do I find the next triplet?
-
Built in PDF reader plugin does not work in Safari 6.0
Safai 6.0 won't open PDF screens within a web link. Instead it shows a blank screen. Any help to fix this problem would be great
-
Consalidated companies 0 and are different
Hello Experts, When I am processing with f-06 am getting the error consolidate companies 0 and ' ' are different.This is happening when it is with more than one customer.I have gone through some threads in forum but it is all about vendor and documen
-
Problem while creating script form - lang EN is not available in client 800
Hi friends, I getting a problem while creating a script form in SE71. if I give the name of the script (zform1) and clicked on create then its giving an information message like " Form ZFORM1 language EN is not available in client 800". But if I use
-
Why has my Itunes ID been disabled?
Haven't used itunes for a while. Now my ID is disabled! Whats the deal?