Brand new i7 causing peaking sound while midi recording or playing

it was not a issue when i was with core 2 macbook, I recived the new one yesterday, when i play and record midi on GB or logic pro it cause like peak cpu sound and it is only one ( first ) channel without vst , ( with no external souncard) can someone please help me , this machine must be 10 times stronger than this...

tomiondrums wrote:
But when looking closer at the data from the record_track the problem becomes obvious: The tick information in the Messages from the record_track are always relative to a tempo of 120bpm no matter what tempo has been set with setTempoInBPM() before the start of recording.
setTempoInBPM is only half of the equation as far as playback speed goes. setTempoFactor scales the playback speed also, as a percentage of the BPM tempo.

Similar Messages

  • No sound while video recording on N500!

    Hello! I just bought Lenovo 3000 N500 for my sister who is in Germany...I want to check everything on laptop, because I want her to use it to skype me...Everything is lovely, except I can't get sound while video recording...Is it possible this laptop has a webcam, but no integrated microphone? But  when I  go and use windows sound recorder that comes with Vista it records audio...But I can't get video to work with audio recording in the same time...Anybody there with a solution? Thank you , people!

    Same problem. Here's my solution:
    For now i record video using an app calle "Video FX Live". It records sounds clearly. Native iphone app still doesnt records any sound.
    So this proves the sound issues during video recording or facetime IS an IOS BUG.

  • Installing OSX on brand new HDD on Macbook Pro 13" Mid 2009

    I have installed a brand new solid state hard drive in my macbook pro 13" mid 2009.
    I replaced the old hard drive because it was failing.
    Now that I have the new hard drive installed I am struggling to get OS X installed onto the new hard drive. I have ruled out using a USB enclosure on the old hard drive to do the transfer because it was failing.
    I do have the original OSX snow leopard start up disk. I have tried using this to install OSX onto the new HDD but it would not work.
    I think it might be because the new HDD is unformatted?
    I have also been into disk utility to try to resolve this but this does not work.
    I have tried partitioning the new HDD but I get an error message "Partition failed .... POSIX reports: The operation cannot be completed. Cannot allocate memory".
    I have also tried the restore function in Disk Utility to restore the disk using my time machine backup disk, but I get the error "Could not erase target - Operation not permitted"
    I have also tried to restore the HDD from a time machine backup, but when I try to select a Destination it says the "disk does not have enough space to restore your system"
    Any suggestions on how to solve this would be much appreciated

    I assume that you have an original Leopard installation disk or a white retail Snow Leopard disk.
    Start your MBP with one of these disks holding the C key down.
    Commence the installation process until you get a display with the menu bar on top.
    Click on UTILITIES.
    From the drop down menu, click on Disk Utility.
    Select Disk Utility>Erase.
    Format the SSD to 'Mac OS Extended (Journaled)'.
    Continue the OSX installation.
    Ciao.

  • Import of Brand New CD:  Took FOREVER & sounds like GARBAGE

    Here's a first for me... A friend bought us a brand new CD as a gift. I played the CD 1 time in our 5 disk changer at home, played it 1 time in the car. After each play, I placed it in the CD case after each time. Not thinking it's a scratched issue.
    Took it up to our brand new iMac to import into iTunes... Much to my surprise, it was showing a 0.2x or 0.5x taking over 2 hours to import the entire 10 song cd into iTunes.
    Several, if not all of the songs sound like trash. They play perfectly fine, but have "skips" in them.
    What on earth could make a CD import go so wrong on a brand new disk?
    Earlier this weekend, I imported about 3 of my old CD's that have been abused and they all imported just fine so I'm not thinking it's the drive in our iMac.
    Any thoughts?

    Checked the CD, it was fine. Tried to re-insert it into the iMac. The iMac takes the CD in holds it for a few seconds, then spits it back out.
    I tried this CD in my work HP laptop w/ iTunes and it imported fine.
    At this point, I will chawk this up to an unusual instance. I sure hope that future CD's work in the Mac!
    Thx,
    Brent

  • Brand New White iPod Touch Sound Distortion

    As title. I've literally just received my new iPod Touch, synced it fine and when I play any song, there is dreadful distortion. It's definitely not the Headphones as I've just tested on both my Classic and iPhone to which the same song sound fine.
    Anyone else having this issue?

    It's a fault, and cant be anything to do with the colour.

  • My brand new earbuds don't work.  No music will play.

    Just received my brand new Ipod Nano.  Charged it, Added an album from Itunes.  Can't get it to produce sound.  It looks like it is playing, but no sound.  Tried another pair of earbuds.  Same thing.  Am I doing something wrong?  Defective product?  Please help this non-techno  person who doesn't have a teenager around to help.  Thanks.

    Also, if your iPod is a new device, not used or refurbished. You have a 1 year hardware warranty and 90 days of technical phone support.  As long as there is no accidental damage to the device it can be replaced without a fee.
    You have generally 2 options for mail in replacement, depending on your area.  If you have an Apple Store in your area, you can schedule an appointment at the Genius Bar and they can take a look at it. Here are some helpful links and information to assist with this process.
    https://selfsolve.apple.com/agreementWarrantyDynamic.do   Enter serial number of device, found on box and                                                                                             on iPod, or in iTunes on the Summary Page
    http://www.apple.com/retail/             Schedule appointment at the Apple Retail Store online
                                                             or call
    1-800-692-7753 to speak with an Apple Representative          Provide the system or person with the serial                                                                                                   number of device, found on box and on iPod, or in                                                                                           iTunes on the Summary Page

  • Brand NEW L305-S5933 - distorted sound

    I have JUST (yesterday) purchased a new satellite L305-S5933 and the sound is TERRIBLE.  It is completely distorted .
    I have checked several different sources - internet radio, wm player (played with the graphic equalizer); cd,  its even distorted through HEADPHONES !!
    Have i not set something up correctly ?  I am sooo disappointed at this time ...
    Can anyone give me some ideas ... TIA 

    ozziewom wrote:
    I have JUST (yesterday) purchased a new satellite L305-S5933 and the sound is TERRIBLE.  It is completely distorted .
    I have checked several different sources - internet radio, wm player (played with the graphic equalizer); cd,  its even distorted through HEADPHONES !!
    Have i not set something up correctly ?  I am sooo disappointed at this time ...
    Can anyone give me some ideas ... TIA 
    There's no reason to put up with a defective product out of the box.  Return it and either make sure the sound is good on the new one, or get a different notebook.

  • Brand new iphone 4 - NO SOUND

    I bought my iPhone 4 (Operating system is 4.1 and the modem baseband is 5.14.02.)a week ago in NY Apple store. I bought it w/o an AT&T contract, since I live overseas.
    Since the first use, I couldn't hear any audio coming out of the iphone. Tried changing the sound setting, sound button, restored my iphone usinf iTunes and even tried DFU. Nothing worked, still no sound.
    A few important notes for understanding the exact problem:
    1. When I connect headphones, there's no sound as well, however the iphone recognizes headphones are connected.
    2. When I press the home button for a few seconds and voice control comes on, instead of a short beep there's a short vibration.
    3. When I connect my phone via Blutooth to my computer, all sounds work fine through the computer speakers.
    This is very frustrating.
    What should I do?
    Thanks in advance,
    Shelly.

    Thank you for all your answers, however....
    1. My iPhone is not hacked.
    2. The iPhone does distinguish between a plugged earphone situation and a speaker one, therefore can't be that it doesn't know if the earphones are plugged in or not. Plus there is NO sound when I plug the earphones in.
    3. I will not be returning my iPhone, since there's going to be an unlock pretty soon.
    Any other ideas..?
    Thanx,
    Shelly

  • Brand New MBP, CPU Peaks.

    Just bought the new MacBook Pro, 2.3GHz Quad-Core i7, 8GB DDR3 1333MHz RAM, 512 GB Solid State Drive.
    My goal was to build the beast, so I could just work and not worry about it, but I keep getting performance fail! Running iStat Menus now, and WindowServer tends to keep taking up like 80-100% CPU, bringing this monster to a crawl. Firefox and Chrome seem to add to it also. Has anyone had issues with this? What can I do?
    Thank you!

    Hi iwanttoworkforapple;
    As long as the older version of iLife is 06 or newer, it will work.
    Allan

  • My brand new laptop has no sound

    I have just brought an hp pavillion dv6-7305 (beats audio). I have booted up the computer and discovered that there is a small red cross over the audio in the toolbar (running windows 8) . I have checked in my device manager and i seem to only have one device (amd hd audio for hdmi). This device is "unplugged". I have also downloaded the IDT hd audio driver from the recovery manager but to no avail. Please help me i have been working on this for the past 3 hours any suggestions will be appreciated

    Hello jimmydee123,
    Please try using Recovery Manager to restore your software and drivers.  You will find the instructions and steps to do this, here.
    Since this is a new notebook, you also have the option to call in and speak to a representative at HP.
    If you live in the US, contact HP Here.
     If you are in another part of the world, begin Here.
    Please let me know if this helps.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Updated brand new Touch to 5.0.1, now won't play music

    I just got a new iPod touch today, and loved it for about the first six hours. Then the update finished downloading, and I installed it. Now, when I try to play music or an audiobook, it does one of two things: either it goes to the Now Playing screen for half a second and flips back to the list, or else it starts skipping forward very fast from song to song (on the display) while playing nothing at all. What happened, and how do I fix it?

    It sounds like your iPod Music database file got corrupt for some reason (say during the update). Problems with corrupt database (with actual file tracks intact on iPod touch) usually get resolved if you add a single track to your iPod via iTunes.
    iTunes would automatically fix the corruption and allow you to play your songs without problems.

  • Help! Brand New Lenovo A10-70 - Issue Downloading Apps

    Hi Lenovo Community,
    I just purchased a brand new A10-70 tablet and while I love the price and features, there appears to be on major issue. Whenever I try to download game apps from Google Playstore, the pad errors out and tells me "Application Could Not Load to SD Card", heck I don't even have an SD card installed.
    This is  actually the second tablet doing this to me. I took the first one back and exchanged it thinking that there was a software glitch but it now appears it is a platform issue. 
    Games such as Minecraft PE simply will not load while others appear to load fine but then when you go to open the app and  use it, you get a notice that the app is not installed.
    I have other tablets from Samsung, HP and even Nabi which have never had  issues downloading game application. 
    What's up with Lenovo? 
    I am willing  to try to get corrected but cannot wait long, will take back  and get another Samsung.
    Thanks,
    Biggzy

    look here but in french : http://forum.frandroid.com/topic/203587-lenovo-a10-70-a7600f-firmware-stock-kitkat-442-27-06-2014/

  • Battery on brand new iPod touch drains when synced to a mac and now it won't charge. If you're thinking of buying a new iPod touch, don't bother. The batteries don't work.

    The battery on my son's brand new 64G iPod touch drained while it was synced yo the mac. Now it says 100% charged when it's connected to a charger, but drops to zero as soon as it's disconnected. It would appear that, either the battery is faulty or the battery indicator is faulty. iPod batteries are not supposed to drain while syncing. And rechargeable batteries are supposed to recharge after they have drained. Maybe I'm missing something simple here, does anyone know what it is?

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Brand new iMac: super slow web browsing

    Brand new iMac is super slow while browsing the web.
    We have cable internet, and the iMac is connected via ethernet cable to an Airport Extreme router. We have a Windows machine connected to the same router.
    The Windows machine loads web pages extremely quickly, the iMac takes 20 seconds to a minute to load anything.
    Clearly there is a settings problem on the iMac. No idea what.
    It isn't the router.
    It isn't the broadband connection.
    It isn't the DNS server.
    Please help!

    I'm not sure if you understood my original post, however, I will re-iterate it here.
    I have several machines connected to the same network.
    MacBook Pro
    Windows machine
    iMac.
    Only the iMac exhibits any problems.
    Clearly, the ISP is not the issue. The iMac is connected via Ethernet to the same router as the PC.
    Clearly the Mac is the problem.
    Changing DNS server has no effect.

  • Re: Screen full of finger prints on brand new laptop

    Hi
    I bought a brand new laptop from a well known store when I opened it the screen was full of finger prints so I exchanged it for the same model and that 1 was the same and looked like it had been wiped with a damp cloth and 1 else had this problem is it the stores fault or Toshibas fault.
    Thanks

    Thanks for reply.
    I have had 3 of these laptops now as the first one developed a fault but it was sealed and the adaptor and plug were sealed in a plastic bag, the second 1 was sealed but the plug and adaptor wasnt in a bag, and was also in a different box than the first 1.
    Now the 3rd one is in the same box as the first it was sealed but the plug and adaptor wasnt, at the moment I have a complaint with the store were I bought it because even though they were sealed.
    I feel that the 2nd and 3rd had already had a system restore but have been told they were new so I dont know whos at fault the store or Toshiba.
    I dont think I should have to clean a brand new screen it might sound like nothing to some people, but I bought new and expect new

Maybe you are looking for