Bridge CS5 Export Module only saves as 72 dpi file

I frequently export my edited RAW files as high resolutioin JPG files.  I've been using the Tools>Photoshop>Image Processor for export.  Having just purchased CS5, I tried using the Export Module and discovered that it only exports files as 72 dpi JPGs (not the 300 dpi of my original files).  Anyone know how to keep my exported files as 300 dpi?

No it's not a bug, the jpg is being created from the preview image (this can be a fullsize document) and there is no PPI information so the document defaults to 72 PPI in photoshop.
I agree there is a problem with the quality setting! It does not seem as it will save at the best quality, the range should be 1 - 100 not 1 - 12.
If you would like to try my interpretation of export you can try my Bridge Processor..
I have added a field to set the PPI
http://www.scriptsrus.talktalk.net/index.htm

Similar Messages

  • Bridge CS5 Output Module only uses first 20 images and ignores the rest

    This happens with all the different styles, both PDF and Web.  Even though more than 20 images are selected, only 20 show up both in the preview and in the final PDF or web page.  It just started happening.

    It just started happening.
    This always means First Aid for Bridge, that is first to purge cache for
    folder using the menu tools/cache/purge cache for folder while having the
    content window pointed to the folder the problem occurs.
    Second option is renew preferences by holding down option key while
    restarting bridge and choose refresh preferences. Try again and if OK set
    prefs again to your wishes to see if it still works.

  • Export panel bridge cs5 - image quality only to 10

    Hi
    Is anyone else having problems with the image quality settings in the image options.  It cannot seem to save the max setting of 12 it only save jpegs at 10.
    Any suggestions,  Thanks Andy

    I had the exact same issue - except mine is limiting it to a maximum of 8
    The workaround I found is to build the export profile exactly as you would like it - and let it pick whatever number it wants (8 or 10) - ignore the words of Low/High/Maximum - those just correlate to the 8 or 10 (or 12)
    12 is the true maximum for the JPG export and once you run it - there is a noticeable file size increase and the images are a higher quality.
    Once you have the profile built, go into the folder "Export Presets"
    Macintosh HD > Users > YourUsername > Library > Application Support > Adobe > Bridge CS5 > Export Presets
    Open up the file that matches the same name as what you created inside bridge
    The file will likely open as an .xml file inside dreamweaver (or another XML editor)
    find the line:
           <imageQuality>8</imageQuality>
    and set what the system set as an 8 (or a 10) to a 12
           <imageQuality>12</imageQuality>
    save the file and run the export again.
    You will have what were 2-4MB JPG files becoming 8-12MB files with a quality of 12/Maximum
    Hope that helps

  • Using Bridge CS5 exporting to flickr get error message "Unable to connect to Flickr, please check your internet connection and try again."?

    using Bridge CS5 to exporting to flickr, but get error message "Unable to connect to Flickr, please check your internet connection and try again."  please help?

    I'm experiencing the same problem. Don't think I can help, but maybe I can offer an explanation. It looks as if Flickr has changed their API and Adobe will need to update the export plugin to comply to get it working again. I found this announcement on Flickr:
    Flickr: The Help Forum: [Official Thread] Flickr API switching to https-only on June 27th, 2014!

  • Bridge cs5 export missing

    Hi
    today i was watching this movie http://www.tipsquirrel.com/index.php/2010/04/adobe-bridge-cs5-new-features-overview/
    but in my bridge cs5 the export tools are missing
    is normal?
    i have not
    send to hard drive
    blog
    email
    i tried to check up for update nothing
    i have only the panel (export ) but it's empty
    thanks

    Zeno Bokor wrote:
    It wasn't posted on the Adobe site yet but you can get it through the updater
    OK, I never use that damned thing!   

  • Bridge CS5 Export Panel Displays Nothing

    I have installed the updated for Bridge CS5 to version 4.0.2 and the export panel does not display anything.  I can select a group of images and right click, choose export to hard drive, but nothing happens.  Then when I exit Bridge I get a warning message telling me that Bridge will clear out all queued files from the export panel.
    I have the Bridge Export Panel working fine on my laptop, but my main machine is not working.  Does the Export Panel require internet access?  That is the only difference I can see between the two.  I would think that I would at least see the option to export to my hard drive . I wonder if Bridge needs some services to use the Export Panel that I have turned off since I am not online?
    Any help would be much appreciated.

    The programs installed on the two machines do vary a bit.  I don't have antivirus on my main machine since it is not online.  At one point, I disabled a few Windows Network Services so they don't use system resources.  I wonder if the Export Panel requires some Windows Service that I have disabled?  I could not update Bridge to 4.02 until I turned on the Windows Service titled "Workstation".
    I would really like to get the panel to work.  I like being able to specify images size by just the long edge...works great for a mix of landscape and portrait orientated pictures....I wish Photoshop could batch process resizing images based on one dimension.
    Thank you for your input Curt.  I appreciate it.
    Kevin

  • Can i with a script force bridge cs5 to show only raw files?

    Hi
    i know there is the filter feature
    but i have every time to set to show me the raw files
    can a script show only raw files ? like *.cr2
    in short i work only with raw files
    i would like to have a solution to display only raw files
    to load with bridge and have bridge ready to show only raw files
    set it on the filter feature is boring ,seeing i use it a lot and every time i run bridge i have to set the filter every time
    thanks

    It appears that with the Sort function set to Flie Type you can bring up just the raw
    files as a group.  With the Filter it appears that it always opens up in the default mode to arrange by file name.
    You could get a script to change it to file type, but that does not save any effort over just clicking on it in the Filter section.  Whether or not you can get a script to change the defalult I would ask in the Bridge scripting forum.  http://forums.adobe.com/community/bridge/bridge_scripting

  • I am trying to save a document with the new pages and it will only save as a zip file any ideas on how to change this?

    I am trying to save a document with the new Pages and it is only saving as a ZIP file anyone know how to fix this or choose a different file type?

    Take a look at the FileSelector
    First make sure the FileSelector is expanded so you can see the directory and sidebar. That's what the little disclosure triangle up by the filename is for. Once the FS has been expanded to look like the above picture, look to see what subdirectory has been selected. Use the SideBar to select an appropriate one.

  • CS5: Export HDV 720p30 Timeline to HDV MPG File

    Hi-
    Hopefully a simple question. I want to export my HDV 720p30 timeline to a file without introducing any additional compression (or very minimal). In searching for a solution, I read that you can connect an HDV deck, select output to tape, let the sequence render, and then search for a MPG file in the cache that's essentially the rendered sequence's HDV MPG file. Since I don't have an HDV deck anymore, is there an easier way? Should I just export MPG with the highest quality settings? What specifically should I choose? Ideally, I'd like to be able to just drag this 'edited master sequence'' back into the timeline as a 'raw' HDV 720p30 source file down the road. Thanks in advance.

    Thanks Colin-
    Thanks. I do understand the additional level of compression. Even though the sequences are only a few minutes each, I don't think it's worth dealing with the huge file sizes, etc. I was just looking for the 'ideal' way to backup the master sequence - something the most equivalent to providing 'an edited master' via HDV tape.
    I suppose I could have used an intermediary codec like Cineform, but it's really not worth it. What would be a good alternate (or less compressed) alternative?

  • Export: In the Save as dialog, the file name is always shown as Crystalviewer instead of the report nameu00A0

    Post Author: sijdk
    CA Forum: Exporting
    hi,
    we are using crystal report server XI. in this i am not able  to export a report with particular report name. see the following steps.
    Generate a report. Click the Export icon.Select the format in which the report has to be stored and click Ok button
    Expected Behavior:The Save As form with the report name as file name should be displayed
    Actual BehaviorFile download window is displayed showing the name of report as crystalviewer.rpt and when Save button is clicked, the Save AS dialog with the filename as Crystalviewer is displayed.The user has to specify a meaningful report name

    Post Author: foghat
    CA Forum: Exporting
    This sounds about right, I can't recall if I've never seen Crystal default to the .rpt name when exporting a report.  In developer XI, reports saved on the enterprise server have some crazy long non-nonsensical unique identifier on export.  If the report is saved locally, it just gives untitled.xxx on export. That said, I find the users usually end up renaming the report file name anyways, so not a big issue.

  • I can only save as a tiff file

    Hi,
    I saved one file as .tif and now after using RAW to process images, opening in CS3, trying to save, there are no options either .jpg or .pds. I had to open two previously saved .jpg files, before I had the full range of choices.
    Is this normal?
    Thanks,

    Thanks, that is what I thought. I checked and it was in the 8 bit mode.
    As I mentioned it took loading a couple of other .jpg files to bring back the options.
    For now all is well.

  • No Export Modules After 4.0.2 upade CS5 Bridge

    I've upadated CS5 4.0.1 via net days ago, and got no Flickr or Facebook export modules in export tab, only Save to Hard disk.
    I've reseted the Bridge preferences, but still the same. Yesterday I downloaded from the Adobe download site, the 4.0.1 and 4.0.2 upadte, and I installed again, first the 4.0.1 update and after that 4.0.2 update, restart the Mac and still no export modules(flickr, facebook...).Reseted the preferences again, and still no other modules.

    Since your first idea of blaming Facebook appears not a solution have you
    already tried to reinstall all modules again??
    In the export panel choose the tiny menu icon top right and click on manage
    modules.
    In this view there is also a toothed wheel icon. Click on it and choose
    reinstall all modules.
    After this you should restart Bridge. Don't know if it works for you but you
    could give it a try.
    All 3 worked. Then suddenly Facebook Module gives back error - other two still
    work fine.

  • Export module

    I would like to see the image quality function in Bridge's export module to actually work, if you set the quality to 11 or 12 or 9, I would expect it to stay there when I click save, it's really that easy. Also DPI control might be nice and color profile, SRGB , Adobe etc..
    A watermark function will be really nice but not sure if that is possible.. They have it in Lightroom so might not be too hard to convert for Bridge..

    Same problem here. It is not possible to set export Quality Image to 11 or 12 but with Camera Raw is possible to do it.
    Some suggestion?
    Camera Raw 4.0.4.2
    Mac OS 10.5.5

  • Bridge CS5 gallery, placed in DW CS5 does not show when uploaded

    My husband has a Halloween haunt. We are gearing up to promote this year's haunt (and our charity of choice this time), and I wanted to update the photos from last year. Admittedly, I am an experienced print designer, wanting to learn more about web design, so not a pro at this by any means.
    I created 3 galleries via the automated Bridge CS5 export (saving each gallery to its own folder within the site folder), then placed each gallery's index file into an iframe div relevant to that year's photogallery (one web page for 2010, one for 2009, one for 2008) so I can keep the site's masthead and a link to go back to the main photos page. Everything works fine when I preview it (local) as well as test on browsers (local). However, when everything is uploaded to the hosting company server, there is a white box for each gallery. I am at a loss. Cannot figure this out, and we're almost into October!
    URL for one of the gallery pages:  http://windyhillhaunt.com/photos2010/10gallery.html
    URL to go in via the main photos page (select either 2010, 2009 or 2008):   http://windyhillhaunt.com/photos.html
    Please help. I want this to work for my husband, but I also want to learn how to do this.
    Thanks in advance.
    Julie Fanning

    I was never able to get it to work. Had all files from the root directory (all resources, images, css, etc) copied onto hosting company. Tried to alter the relative path (Kdn002), etc. Nothing worked other than local testing.
    Finally downloaded jAlbum, used the same div and iFrame structure, and it worked! I may make some tweaks down the road, but it's working fine now.
    http://windyhillhaunt.com/photos.html
    Thanks,
    Julie

  • How to restore file associations in Bridge CS5?

    Hi
    Some time ago I somehow lost file associations in Adobe Bridge CS5. Now when I doubleclick a RAW file (Canon .CR2 file) I get Firefox, when I doubleclick a JPG I get FastStone and when I doubleclick a PSD file nothing happens at all. Also Photoshop is not in the options I get by right-clicking photos and choosing "Open with...".
    I have tried [ Edit -> Preferences... -> File Type Associations -> Reset to Default Associations ] , but that didn't help.
    Also when I look in the File Type Association dialog, my file types are set to "Explorer Settings", and Photoshop is not among the other options. I don't know how this uses to be (if associations are defined in Bridge or it uses Explorer/Windows settings?), but how do I easily recreate original setup from when I installed Photoshop?
    Regards
    Stig Nygaard
    http://www.rockland.dk/
    http://www.flickr.com/photos/stignygaard/

    Hi Neil
    Thanks for the answer. I'm aware I can manually setup associations one-by-one for all file types I need, but just hoped there was some easier way. I mean there's a lot of file types associated in either windows/explorer or directly in Bridge. Some that I might not know I need tomorrow.  Two things I have found out since I asked the question:
    1) The problem is probably caused by uninstalling my old CS4 after I had installed CS5. It looks like somebody experienced a similar problem by uninstalling CS3 after the installation of CS4: http://forums.adobe.com/message/1899159#1899159. So apparently a bug Adobe hasn't fixed even though it was in previous version too!? :-( I think it is only natural to keep your old version installed for some time when installing an upgrade. Just to make sure the new version works well before you uninstall the previous (And I have previous had the problem that a new version of Photoshop had a habit of freezing on my PC - or some other error I don't remember -  until Adobe released an update. So there's a reason for my behavior).
    2) I have installed a second copy of CS5 now on my secondary portable PC, and are using this to make a similar setup regarding file associations in windows/explorer and Bridge. All associations for Photoshop was lost on my primary PC, and God... there's a lot of file associations to setup again... May I recommend Adobe (if reading this) to fix this bug and/or make a script to automatically recover all associations in case of loss!
    /Stig

Maybe you are looking for