Bridge Home Content problem

Hi,
Bridge 2 (CS3) displays content that is clickable, however
when I click on it nothing happens. For instance, clicking on the
200 Adobe CS 3 training videos.
I've disabled Norton Internet Security. I've emptied the
cache, reset the defaults, unchecked all the scripts, closed the
folder and meta panels. Alas a lack of results.
I appreciate any and all suggestions.
Kind regards,
George

Hmm... Now I have following problem... Now the Home button works but when you load the content and expect that the movie with the content uploaded passes through the last frame (where there is a code: gotoAndPlay(200); ) the home button stops working. But only when the conten is loaded. In the first 190 frames I have an INTRO, and in a frame 200 I've put AC3 for buttons. On the last frame gotoAndPlay(200); because I would not play the INTRO again whenever you press the button Home. I don't know why this happens.

Similar Messages

HT202213 Home sharing problem: I have never set up home sharing but I feel I understand it. I recently (last 2 months or so) deauthorized, first time ever, all computers with my iTunes account. I am trying to set up home sharing but get iTunes says "You

Home sharing problem: I have never set up home sharing but I feel I the concept and how it works. I recently (last 2 months or so) deauthorized, first time ever, all computers with my iTunes account. I have 3 computers authorized. I am trying to set up home sharing but get iTunes says:
"Home Sharing could not be activated because this computer is not authorized for the Apple Id "#########@###.com". Would you like to authorize now?" I click "authorize" and get the next error " You cannont authorize more than 5 computers. You have already authorized 5 computers with this Apple ID. To authorize this computer you must first deauthorize one of the other computers."
Can someone help or shed more light on my problem?
Thanks,
Richard

Home Sharing is designed to work on your local network not across the internet/cloud.
Stuff is accessed under the Computers column where your local iTunes library on a local computer would appear.
Home Sharing would share your iTunes content (i.e. stuff stored in itunes on the computer, not in the cloud) with AppleTV or an iPad etc on the SAME network.
AppleTV2 will not be able to see itunes content on the work computer over the internet. It's not designed to. if the work computer was on the home network it would.
iCloud is in it's infancy and is not a mature product - iTunes TV Show purchases appear on AppleTV, but currently music does not unless you are subscribed to iTunes Match. I find this rather odd to be honest, along with the inability to buy music on AppleTV2. Movies purchased in iTunes are not authorised for iCloud viewing currently either.
Maybe it has something to do with iTunes Match 'getting in the way' - i think they assume you'll use that whereas you really want to be able to access Purchased music from the cloud without subscribing to itunes Match which is overkill for some.
AC

How can I locate photos in PSE6 now that Bridge Home is discontinued?

How can I locate photos in PSE6 now that Bridge Home is discontinued? When dragging a photo from my Desktop to the PSE6 symbol in my Dock, PSE6 informs: "Could not complete your request because Photoshop does not recognize this type of file". Thus I am compelled to open this file with hundreds of photos on my Desktop, and here it's imposssible to find it because the thumbnails are so tiny. Therefore much time is wasted in having to open them all one at a time in PSE6. I did not have this problem with my Photoshop 7.

Barbara,
Your persistence in trying to find a solution has turned out beneficial! It was in 2009, shortly after receiving my PSE6, that it informed me of Bridge Home now being discontinued. So that was what compelled me into the tedious procedure described in my original thread. Now, after having read your comment, I gave it a different try - I dragged a file with photos to the "BR". symbol in Dock, and to my surprise legible thumbnails opened in Bridge CS3 .
The message saying that Bridge Home has been discontinued is no longer there, so my thought is that PS must have added to the program in the meantime.
Thanks for your help.

Cannot open CS6 Bridge. Always the same ERROR: Bridge has a problem and cannot read the cache

Cannot open CS6 Bridge. Always the same ERROR: Bridge has a problem and cannot read the cache

Try this. This is for CS6 but substitue CC and Bridge 6.
~library/caches/Adobe/Bridge CS6 and inhere should be 2 files:
Adobe Bridge Plug-in Cache
and the folder called Cache. Inhere should be 4 folders called '254', '1024', 'data' and 'full'
All those folders carry the content of the respective quality of the thumbs and preview as well as 100 % cache and Bridge database.
Any way, Since you have not used Bridge you have no relevant amount of cache and I would suggest you quit both PS and Bridge and manual delete both the items (plug in and folder called cache at the end of the Bridge CS6 path mentioned above.
(both files will refresh itself after a restart of Bridge).
To be on the save side also visit in same user library the folder Preferences and look for the file called "com.adobe.bridge5.plist" (yes it is Bridge 5 that comes with CS6, all Adobe apps have their own version number and they are presented in the same Suite version. CS6 has PS version 13 and Bridge version 5 )
also drag this file to the trash.
Then hold down option key (alt) while starting Bridge and this should give you the option to reset the preferences as mentioned earlier in this thread.
Choose reset prefs and try again.

Bridge CS6 Cache problem

Have installed Photoshop CS6 and in using Bridge I get the message "Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation". If purge the central cache as instructed, on the start up of Bridge I get the same message and are unable to use Bridge.
I am on a Mac using OSX 10.7.4
Your help will be appreciated

"Removing the Cache manual is fast, you only need time to rebuild cache,
but that is something you can do with one click on the button an let it
run overnight." How do I do that?
The path provided is for a Mac, there should be a similar path for Windows, maybe Curt can provide you this. The principals stay the same, you quit bridge, dump the cache file manual, restart Bridge (builds a new, empty but fresh cache folder) and when you point Bridge to a folder it start building the cache according your settings (ACR, HQ preview etc.)
If you have a lot of subfolders just select the main folder, use the menu view / show items from subfolders and this means your main folder shows all the content of your subfolders in the content panel.
This takes a while and according to your amount of files and file size as well as processor speed it can take several hours before it is finished. For best practice start this procedure as 'last of the day', leave your PC on for the night and let Bridge do its job. It takes a lot of resources and time for Bridge to cache so if it is the only task your PC has to do the better it will do it

Bridge CS4 contents panel

All the thumbnails on right side of Bridge CS4 contents panel are cut off.
How do I get these thumbnails to appear in full?

That means that you also should refresh your preferences by restarting
Bridge holding down option key
sharon_t7 <[email protected]>
I had the same exact problem. I had to go up to windows, workspace, reset
standard worspaces. By just resetting the orther "reset workspace" didn't fix
the problem.

Adobe discontinues Bridge Home service

Just noticed this as I went to click on Bridge Home:
<br />
<br />c
<a href="http://www.pixentral.com/show.php?picture=19eHs4T1feUaIPayEQ65tkwaeTsU" /></a>
<img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/19eHs4T1feUaIPayEQ65tkwaeTsU_thumb.jpg" border="0" />

But the very useful content moved to the place where it belongs so you can view it with your internet browser instead of using Bridge (that should not be a one size fits all application IMHO) for this :-)

Adobe cs4 freezes when trying to open Bridge Home

hi,
i am using adobe bridge cs4 in mac os x 10.5
when i try to open Bridge Home, it freezes. Any other thing works fine in Bridge.
thanks in advance.

Actually, I missed one of the suggestions and that has fixed it.
I did have Opera installed and trashed it as per Ramón's suggestion - this didn't fix the problem - with no separate Opera install, Bridge still froze.
What finally fixed it was installing a new, independent copy of Opera version 9.63
I launched Opera once before trying Bridge again - this may or may not be a necessary step.

When I start the program I instantly see this message: "Adobe Bridge encountered a problem and is unable to read the cache, please try purging the central cache in cache preferences to correct the situation". I have tried this and it only results in a s

When I start the program I instantly see this message: "Adobe Bridge encountered a problem and is unable to read the cache, please try purging the central cache in cache preferences to correct the situation". I have tried this and it only results in a stalled/locked program. I have tried restarting my machine multiple times and tried reconfiguring how the cache is managed. Do you have anyone who could walk me through each step to correct this problem which just started two days ago. I have owned this program for at least a year now...

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I can use Mail at home, no problem. But when I travel, I can receive mail but not send it. I get a "server can't be reached" message. Yet when I send a photo using iPhoto, it gets sent. Help!!

I can use Mail at home, no problem. But when I travel, I can receive mail but not send it. I get a "server can't be reached" message. Yet when I send a photo using iPhoto, it gets sent. Help!!

To diagnose problems with Thunderbird, try the following:
*Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

Bridge cs5 camera raw 6.5 to 6.5 and new bridge cs6 preview problem

Hi,
when i actualize camera raw from 6.5 to 6.6 the preview can`t give me right preview after 1 adjustment in camera raw.Image apears like when we open it in camera raw and it last few seconds with the yellow exclamation mark.
Months ago the only solution i found after several instals was to turn back to camera raw 6.5.
Now im trying beta bridge cs6 and problem come back for me again.
I use Nikon D3x with 14 bits ~49MB .nef files in Windows 7 64 bits.
Is any one have same problem?And why only in 6.6 (and new camera raw 7.0) and not in 6.5?
Thanks
Arménio Teixeira

Frau S aus B wrote:
I use Bridge CS5 with camera raw 6.7.1 in combibnation with a canon 6D and a canon 5D Mark2. The raw files from the 5D are shown in bridge, the raw files from the 6D are not. There is just an icon. The camera raw add-on is the latest usable update for Windows, the canon 6d is listed as compatible. Has anyone an idea what to do?
The Canon 6D id NOT supported by ACR 6.7.1. It was supported for the very first time in ACR 7.3 whch requires CS6 to run.
Therefore you will never be able to open raw CR2 files from the 6D directly in CS5.
If you do not plan on upgrading, you can download the free, stand-alone Adobe DNG Converter 8.3 (always use the latest version, it's not tied to your version of Photoshop at all), install it like any other application and then run it on each batch of CR2 files to convert them to raw DNG files that you can then open in your version of Photoshop and ACR.

Bridge CS6 cache problem causes freeze

MacPro early 2008, 10 mb RAM, Apple OSX 10.7.3, CS5 already installed.
CS6 Beta was working fine until today.
Now when I open Bridge CS6 I get "Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation." I then try to purge the cache, but nothing happens and Bridge freezes.
Worse, I cannot use my keyboard at all or perform any mouse click actions if Bridge is the active window. I cannot close Bridge. What I can do is alt/tab to another window, and then Force Close Bridge.
I have tried restarting the MacPro but this does not solve the problem.
The problem started earlier today after I re-edited a nef which I had previously edited in ACR 6. I cancelled all the previous edits first.
Also, yesterday I installed Little Snitch, which I have now uninstalled.
There are no CrashReporter logs for the freezing problem.

How is your disk free space? When I loaded Bridge CS6 the default option was for 100% preview. That takes a lot of time and space to build. Can occupy gigs of space.
I reset thumbnails to embedded. Much smaller and faster and for me works just fine.

When opening Bridge (CS6) I get the following message: "Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation" I tried and after selecting purge cache it does not a

When opening Bridge (CS6) I get the following message: "Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation" I tried and after selecting purge cache it does not allow me to select OK. Also Bridge keeps saying "Building Criteria" with the spinning wheel and nothing happens. I tried uninstalling and reinstalling to no avail. Please help:)

Maybe a Preferences reset can help:
Numerous program settings are stored in the Adobe Bridge preferences file, including display, Adobe Photo Downloader, performance, and file-handling options.
Restoring preferences returns settings to their defaults and can often correct unusual application behavior.
Press and hold the Ctrl key (Windows) or the Option key (Mac OS) while starting Adobe Bridge.
In the Reset Settings dialog box, select one or more of the following options:
Reset Preferences
Returns preferences to their factory defaults. Some labels and ratings may be lost. Adobe Bridge creates a new preferences file when it starts.
Purge Entire Thumbnail Cache
Purging the thumbnail cache can help if Adobe Bridge is not displaying thumbnails properly. Adobe Bridge re-creates the thumbnail cache when it starts.
Reset Standard Workspaces
Returns Adobe predefined workspaces to their factory default configurations.
Click OK, or click Cancel to open Adobe Bridge without resetting preferences.

My bridge is not working normally and keep given me this message : bridge encountered a problem and is unable to read the cache . Please try purging the central cache in cache preferences to correct the situation

My bridge is not working normally and keep given me this message : bridge encountered a problem and is unable to read the cache . Please try purging the central cache in cache preferences to correct the situation

And did you then actually purge the cache?
Please realize that you have given ZERO details.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

When opening Bridge I get this message: Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in the cache preferences to correct the situation. I have tried this and still get this message. when I delete image

When opening Bridge I get this message: Bridge encountered a problem and is unable to read the cash. Please try purging the central cache in the cache preferences to correct this problem. I did this and still get this same message.Also now when deleting images they don't delete till I close and reopen Bridge. What can i do to fix this problem?

Maybe a Preferences reset can help:
Numerous program settings are stored in the Adobe Bridge preferences file, including display, Adobe Photo Downloader, performance, and file-handling options.
Restoring preferences returns settings to their defaults and can often correct unusual application behavior.
Press and hold the Ctrl key (Windows) or the Option key (Mac OS) while starting Adobe Bridge.
In the Reset Settings dialog box, select one or more of the following options:
Reset Preferences
Returns preferences to their factory defaults. Some labels and ratings may be lost. Adobe Bridge creates a new preferences file when it starts.
Purge Entire Thumbnail Cache
Purging the thumbnail cache can help if Adobe Bridge is not displaying thumbnails properly. Adobe Bridge re-creates the thumbnail cache when it starts.
Reset Standard Workspaces
Returns Adobe predefined workspaces to their factory default configurations.
Click OK, or click Cancel to open Adobe Bridge without resetting preferences.

Bridge Home Content problem

Similar Messages

Maybe you are looking for