Bridge scripts and commands not working in PS
specifically the batch command from bridge ( and also dr browns services)
Hit the batch command in bridge - it switches to PS but nothing happens.
ps cs5 64 in win7 64. Its a new install.
pc,
For proper reinstallation in such a case, see 6) below.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
Similar Messages
-
CS4 Photoshop Scripts and Actions not working
Hi All,
I just upgraded my suite to CS4 from CS3. Now all my actions and default scripts such as "Load Files to Photoshop Layers" from Photoshop & Bridge are not working. I've tried remaking my actions and renaming files but no luck. I've tried deleting preferences but no luck as well. Im stuck.
Here are my machine specs:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 9 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version (system): 1.7f10
Any ideas?Hello,
Its actually doesn't do anything. Once you figure out that PS is not responding then you try to do it again - this comes up "photoshop is currently busy with another task. Would you like to queue this process?" -
Multiple apps and commands not working
disk utility won't get past "gathering disk information". it's been going for 2 hours. i haven't made any changes. software update won't get past it's scan to see if i need new software. itunes will open but nothing happens after it stops bouncing. photoshop won't quit or force quit. any ideas.
I found more info on my own.
First, WDS is not required to stream to multiple speakers. Standard client mode (join a wireless network) works just fine provided you don't want the AE to extend the network serving as an access point for wireless or printer.
Second, In Sharing (Sys Pref) setting Firewall rule to allow UDP on 6001, 6002 fixed the issue.
Why didn't Apple document that in the AirTunes info that accompanies the Airport Express? -
PS/Bridge CS5 Batch Processor Not Working / Missing Scripts
I'm having a bit of a problem within Photoshop/Bridge CS5 and haven't found anything that works to resolve it.
In Bridge, I want to launch the Photoshop Batch Processor via Tools>Photoshop>Batch.
When I select this, Photoshop launches, but the dialog to process the images never shows. On occasion, if I return to Bridge and attempt the same operation again, I'll get a notification that there's already something in progress and asks if I want to queue this operation. The other times (majority) I can return to Bridge and attempt the operation again but get no dialogues in Photoshop. I can try the other options in this menu as well (eg Image Processor, etc) and get the same results.
Here's what I've done so far:
1. Checked Bridge Edit>Preferences>Startup Scripts and ensured those were all checked. I even disabled all, closed Bridge and Photoshop, then re-enabled.
2. Cleared all Preferences from Bridge and Photoshop (using Ctrl+Shift+Alt at launch).
3. Reinstalled Photoshop (multiple times)
4. Uninstalled Photoshop, ran the Adobe CS Cleaner application, then reinstalled Photoshop.
It should be noted that in Bridge>Edit>Preferences and Startup Scripts, if I click the button to 'Reveal my scripts' the folder it takes me to is blank. Not sure if this folder is solely used for personal/user created scripts or for others as well, but it's completely empty.
I have also gone to Help>Updates and updated both applications with any necessary updates from Adobe.
If I go into Photoshop and select File>Automate>Batch or even File>Scripts>Image Processor, both dialogues open fine.
Running Windows 8.1 Pro.
Anyone else seen this and actually resolve the issue? Does anyone know where the scripts are supposed to be located and/or if I can get them from somewhere else? Any help is much appreciatedMake sure Photoshop is not started and then try to use Bridge menu Tools>Photoshop>Batch does Photoshop start up?
Bridge CS5 menu Tools>Photoshop>Batch works on my Windows 7 Pro system
Photoshop Automate>Batch is not a script and Photoshop does not any external java program it had its own version of java plugin.
c:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Plug-ins\Extensions\ScriptingSupport.8li
c:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)\Plug-ins\Extensions\ScriptingSupport.8li
However there are two startup scripts for the bridge involved Bridge and Photoshop You must have them for you have a Bridge menu Tools>Photoshop>items
two scripts on my system are:
c:\Program Files (x86)\Common Files\Adobe\Startup Scripts CS5\Adobe Bridge\bridge-4.jsx
c:\Program Files (x86)\Common Files\Adobe\Startup Scripts CS5\Adobe Photoshop\photoshop.jsx
The photoshop.jsx seems to be the one the the inserts the menu Tools>Photoshop>Batch into Bridge and also invokes Photosgop Automate>batch photoshop.jsx also inserts the other Bridge menu Tools>Photoshop>Menu Itens that you state work.
Here is what I see in my photoshop.jsx for batch. I do not know or understand Bridge scripting and do not know javsscript but what I see there seems to be some checking done about Photoshop being available and if it is not the script just returns which is what you seem to be experiencing the test looks like this
if (!photoshop.correctPSIsAvailable (availabilityCheckOptions))
return;
The whole batch support section follows:
//=================================================================
// Batch
// Sets up Photoshop's Batch automation command to be
// accessed from the Bridge.
//=================================================================
// This routine takes an array of files. If called by Photoshop,
// it will invoke Batch with the files. If called by
// any other app, it will send a BridgeTalk message to Photoshop
// to invoke this routine with the same arguments.
photoshop.batch = function (/* Array */ files, availabilityCheckOptions)
try
if (availabilityCheckOptions == null)
availabilityCheckOptions = new AvailabilityCheckOptions ();
// Make sure this can be run.
if (!photoshop.correctPSIsAvailable (availabilityCheckOptions))
return;
if (BridgeTalk.appName != "photoshop")
// Bring Photoshop to the foreground.
BridgeTalk.bringToFront (photoshop.versionInfo.btTargetName);
// Create a new BridgeTalk message for Photoshop to invoke
// Batch with the selected files
var btMessage = new BridgeTalk;
btMessage.target = photoshop.versionInfo.btTargetName;
btMessage.body = "photoshop.batch (" + files.toSource () + ");";
btMessage.send ();
else
app.bringToFront();
photoshop.runActionCommand ('batch', files,
localize ("$$$/PSBI/Automate/BatchSettingsFile=Batch via Bridge Settings"));
catch (error)
if (error.number != 8007) // Don't report user cancelled errors.
alert (error);
// This routine is called when the Bridge's Batch menu item is
// chosen.
photoshop.batchFromBridge = function ()
try
var availabilityCheckOptions = new AvailabilityCheckOptions ();
// Make sure this can be run.
if (!photoshop.correctPSIsAvailable (availabilityCheckOptions))
return;
var files = photoshop.getBridgeFileListForAutomateCommand (true, false);
if (files.length != 0)
photoshop.batch (files, availabilityCheckOptions);
catch (error)
if (error.number != 8007) // Don't report user cancelled errors.
alert (error);
// The code below inserts the Batch menu item into the Bridge menus.
if ((BridgeTalk.appName == "bridge") && (BridgeTalk.appVersion.indexOf (photoshop.versionInfo.bridgeTargetVersion) == 0))
// Use temp function to keep vars out of global namespace.
photoshop.tempFunction = function ()
// Set up the info necessary for inserting this item into the Bridge's menus later.
var menuItemInfo = new Object;
menuItemInfo.text = localize ("$$$/PSBI/Menu/Automate/Batch=Batch...");
menuItemInfo.name = 'Batch';
menuItemInfo.onSelect = photoshop.batchFromBridge;
photoshop.menuItemInfoArray.push (menuItemInfo);
photoshop.tempFunction ();
delete photoshop.tempFunction; -
Why is my BDC_CURSOR command not working to position the cursor?
Why is my BDC_CURSOR command not working to position the cursor? Here are the details regarding my issue.
I am writing a BDC to mass delete routing material assignments using transaction CA02. I am OK to navigate through the initial screen to go to the Header screen and from here I am OK to navigate to the Material Assignments screen. But once here, I cannot get the BDC_CURSOR command to take me into the list. Here are the commands I am using. Please let me know what I may try differently.
CA02 Material Assignment - Set position <-- this resets list of materials to correct position
PERFORM bdc_dynpro USING 'SAPLCZDI' '1010'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RC27X-ENTRY_ACT'.
PERFORM bdc_field USING 'BDC_OKCODE' '=ENT1'.
PERFORM bdc_field USING 'RC27X-ENTRY_ACT' c_position.
CA02 Material Assignment - Delete
PERFORM bdc_dynpro USING 'SAPLCZDI' '1010'.
PERFORM bdc_field USING 'BDC_CURSOR' 'MAPL-MATNR(01)'. <-- this is not working to set the cursor into the list
PERFORM bdc_field USING 'BDC_OKCODE' '=LOE'. " trash can
PERFORM bdc_field USING 'RC27X-ENTRY_ACT' c_position.
CA02 Material Assignment - Green Check OK
PERFORM bdc_dynpro USING 'SAPLCZDI' '1010'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RC27X-ENTRY_ACT'.
PERFORM bdc_field USING 'BDC_OKCODE' '=BACK'. " check mark
PERFORM bdc_field USING 'RC27X-ENTRY_ACT' c_position.Thank you for your reply.
I had used SM35 to record. However, I was not aware of the "create program" feature. I had commented out a section from my previous post which I have now added back (latest code below). But it still did not resolve the issue.
When I execute with dismode = 'N', I get back error message "No batch input data for screen SAPLCZDI 1010".
When I execute with dismode = 'E' (only show dynpros when error), it stops at the material selection screen without placing my cursor in the list. I can then MANUALLY click to set the cursor position in the list, MANUALLY click the trashcan, it then uses my BDC command to respond to the popup asking "Do you want to delete", still leaving me at the material selection screen. I can then MANUALLY click the green check (or enter), then it continues with the BDC to go back to the previous screen, and saves. But it still will not place my cursor in the material selection list (SAPLCZDI screen 1010).
Here is code used. It is the second section of code labeled "CA02 Material Assignment - Delete" that is not working.
CA02 Material Assignment - Set position
this code functions to position the desired material to first in screen list
PERFORM bdc_dynpro USING 'SAPLCZDI' '1010'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RC27X-ENTRY_ACT'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENT1'.
PERFORM bdc_field USING 'RC27X-ENTRY_ACT'
c_position.
CA02 Material Assignment - Delete
PERFORM bdc_dynpro USING 'SAPLCZDI' '1010'.
PERFORM bdc_field USING 'BDC_CURSOR'
'MAPL-MATNR(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=LOE'. " trash can
PERFORM bdc_field USING 'RC27X-ENTRY_ACT'
c_position.
Acknowledge Pop-Up Screen
PERFORM bdc_dynpro USING 'SAPLSPO1' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
CA02 Material Assignment - Green Check OK
PERFORM bdc_dynpro USING 'SAPLCZDI' '1010'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RC27X-ENTRY_ACT'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BACK'. " check mark
PERFORM bdc_field USING 'RC27X-ENTRY_ACT'
c_position. -
Enabling Global Script Protection is not working while adding "&"
Hi All,
To prevent crosssite scripting attacks I ticked the the check box "Enable Global Script Protection" in CF admin. But it is not working , I mean not able to prevent the scripting attacks.
Steps I followed
1] I executed the below URL.
https://xyz.abc.com/index.cfm?cardholder_number=&<script>alert(1)</script>
2] In the fornt end I got a javascript alert message as injected in the URL.
But this alert message should not come as I have enabled script protection in CF admin. Right????
Now I removed "&" (https://xyz.abc.com/index.cfm?cardholder_number=<script>alert(1)</script>) from the above URL then I was not getting the javascript alert message. Does this mean that script protection will not work if we are adding "&" to the URL????.
I searched the neo-security.xml and its looks like below.
<var name='CrossSiteScriptPatterns'><struct type='coldfusion.server.ConfigMap'><var name='<\s*(object|embed|script|applet|meta)'><string><InvalidTag</string></var></st ruct></var>
Can any one help me out to fix this.Abdul L Koyappayil wrote:
But still one doubt remains why alert message is coming only when there is "&" in the URL??
This happens with "&" because it is a special Javascript symbol whose purpose is to delimit - that is, separate - the key-value value pairs in the URL's query-string. For example, in the URL www.myDomain.com/index.cfm?a=1&b=2, the "&" delimits the query-string into the 2 key-value pairs
a=1
b=2
Let us then consider the case where the URL is www.myDomain.com/index.cfm?cardholder_number=&<script>alert(1)</script>. The & will delimit the query-string into
cardholder_number=
<script>alert(1)</script>
The presence of '&' implies there are 2 variables. However, there is only one '=' sign, which means there is just one key-value pair. In addition, cardholder_number is a legal name for a URL variable, whereas <script>alert(1)</script> is not. The browser therefore sends the following query-string to your application
cardholder_number=EMPTY_STRING&<script>alert(1)</script>
However, Coldfusion's scriptprotect feature will intervene and neutralize this to
cardholder_number=EMPTY_STRING&<invalidtag>alert(1)</script>
which is harmless. These will enter into Coldfusion as the URL variables
cardholder_number=EMPTY_STRING
EMPTY_STRING=EMPTY_STRING
The special nature of '&' as delimiter is what prompts the browser to run the script. In fact, by default, browsers will run any Javascript that you place in the query-string. Run this, for example
http://www.myDomain.com/index.cfm?<script>alert(1)</script>
But what reason will I say if they are asking me why javascript alert is coming then.
As you have just seen, the <script> tag cannot come in. The alert occurs at the browser - that is, at the client - but Coldfusion runs at the server. Communication between client and server is by means of the URL variables that the client sends to the server. For the attack to be effective, it has to be sent in the form
sneakyVar=<script>alert(1)</script>
That is not the case here. -
Odi os command not working with agentservice agent.
dear all,
odi os command not working with agentservice agent but with local agent it work fine.. and user is administrator.
kindly solve it
Regards
NaseerHi,
you referred to oscommand, so are you executing a .bat fille? if yes, where exactly does the .bat file reside, local machine or on network share?
Also, follow these couple of documents, they may be helpful to you.
859215.1 and 424703.1
Regards
Srikanth -
Crontab reboot command not working
Crontab reboot command not working
Greetings
I am new at this so excuse any ignorant mistakes I might be making.
I have a server (MM X.4.9) that I would like to restart every day in order to make sure no programmes are hanging etc. If a program is hanging is should force quit it. Using terminal I have entered the following command:
sudo nano /etc/crontab
Entered password
Than I entered using tab between each sequence:
15 13 1 1 * root reboot
This was a test run and it did not reboot.
Entering
cat /etc/crontab
I got:
# The periodic and atrun jobs have moved to launchd jobs
# See /System/Library/LaunchDaemons
# minute hour mday month wday who command
15 13 1 1 * root reboot
What have I done wrong?
ThanksHehe, there you are experimenting with a "reboot" cron command and you are surprised it quit so fast. You are not going to find a "graceful" solution to shutdown dialogs.
MSWord is a Java app, so it is especially important for the command to work that it doesn't get hung up on outer layers of the system. Especially stupid apps that use Java which is not well integrated. I believe Word has a 5 minute autosave, so you should be able to recover most of your document.
This reboot command should be running around 2AM, when the average webserver has minimum traffic. If you feel the need to reboot during busier times of the day, I'd suggest you look at what's causing your applications to crash. -
Illustrator Short Commands Not Working
Hi Team,
My illustrator CS6 short commands have stopped working.
Any time I try to use any CMD + Key, illustrator will not react.
This has been on going for a few months, I have tried resetting preferences but nothing has changed.
If someone could please help.
Thanks,
BrandonHi Jacob,
I have tried resetting preferences and few other options.
Anytime I press the CMD key the option at the bottom just changes from selection to direct selection, if that helps.
Should I uninstall and reinstall illustrator?
I no longer have my access key.
Thanks,
Brandon
Date: Wed, 8 Jan 2014 15:39:58 -0800
From: [email protected]
To: [email protected]
Subject: Illustrator Short Commands Not Working
Re: Illustrator Short Commands Not Working
created by Jacob Bugge in Illustrator - View the full discussion
THS,
You may try the following (you have tried/done some of them already) and see whether it helps (the following is a general list of things you may try when the issue is not in a specific file; 3) and 4) are specifically aimed at possibly corrupt preferences):
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press CtrlAltShift/CmdOptionShift during startup (easy but irreversible);
4) Move the folder Other options (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5994475#5994475
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5994475#5994475
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5994475#5994475. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Illustrator at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
Bridge CS3 "Edit Find" not working after optimizing cache.
Power PC G5
Mac OSX v.10.4.11
3GB RAM
Photoshop CS3
After optimizing the cache, my Edit>Find feature does not work. I looked into the Bridge Preferences and could not find anything under Thumbnails or Cache that can turn it back on. Please advise.Make sure you have Bridge 2.1.1.9.
Purge the cache for each folder through the Tools menu in Bridge. -
How can I upload my RAW files from my Nikon D750 to my MAC computer? I now have Camera Raw 8.7.1. and updated my camera and still not working:(
Which version of mac os x do you have?
Which version of photoshop are you using?
Do you get any message when you try to open the files into photoshop?
Did you use Nikon Transfer to get the files from your camera to computer?
Did you try the File>Get Photos From Camera in Adobe Bridge? -
Timemachine and link not work property...
At home I have 10.4.2 and no digidesign hardware.
Timemachine and link not work property...
I send them: when I use ol algorythm- they caclulating 1 mono file (3 min lengh) about 15 min at dual G5. It is normal? And when I use new algorytm- nothign happen whith file. No result. (1 week it work fine).
Link in matrix not work
And what system I shood to use at studio whith PT?CRash when change lengh of region whith new algoruthm
Date/Time: 2005-08-24 12:11:29.752 +0400
OS Version: 10.4.2 (Build 8C46)
Report Version: 3
Command: Logic Pro
Path: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Parent: WindowServer [91]
Version: 7.1.0 (7.1.0(877))
Build Version: 1A73
Project Name: LogicPro710_ApplicationData
Source Version: 900001
PID: 288
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x0000007e
Thread 0 Crashed:
0 com.apple.logic.pro 0x0059a8c8 0x1000 + 5871816
1 com.apple.logic.pro 0x0037183c 0x1000 + 3606588
2 com.apple.logic.pro 0x00370000 0x1000 + 3600384
3 com.apple.logic.pro 0x002983b4 0x1000 + 2716596
4 com.apple.logic.pro 0x00298a84 0x1000 + 2718340
5 com.apple.logic.pro 0x00298c28 0x1000 + 2718760
6 com.apple.logic.pro 0x0005e264 0x1000 + 381540
7 com.apple.logic.pro 0x0005c6e0 0x1000 + 374496
8 com.apple.logic.pro 0x002aa538 0x1000 + 2790712
9 com.apple.logic.pro 0x00571e10 0x1000 + 5705232
10 com.apple.logic.pro 0x0016c090 0x1000 + 1486992
11 com.apple.logic.pro 0x0017864c 0x1000 + 1537612
12 com.apple.logic.pro 0x00178ad8 0x1000 + 1538776
13 com.apple.logic.pro 0x0016c150 0x1000 + 1487184
14 com.apple.logic.pro 0x0018e388 0x1000 + 1627016
15 com.apple.logic.pro 0x0018e588 0x1000 + 1627528
16 com.apple.logic.pro 0x0017d0cc 0x1000 + 1556684
17 com.apple.logic.pro 0x00124170 0x1000 + 1192304
18 com.apple.logic.pro 0x002fed40 0x1000 + 3136832
19 com.apple.logic.pro 0x003026a8 0x1000 + 3151528
20 com.apple.logic.pro 0x00300a94 0x1000 + 3144340
21 com.apple.HIToolbox 0x931229f4 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 692
22 com.apple.HIToolbox 0x9312214c SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 372
23 com.apple.HIToolbox 0x93128ed0 SendEventToEventTarget + 40
24 com.apple.HIToolbox 0x93229ffc SendEventFromMouseDown + 156
25 com.apple.HIToolbox 0x93205998 HandleClickInContent + 368
26 com.apple.HIToolbox 0x93155d6c HandleWindowEvent + 1584
27 com.apple.HIToolbox 0x931655c8 StandardWindowEventHandler + 160
28 com.apple.HIToolbox 0x931229f4 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 692
29 com.apple.HIToolbox 0x9312214c SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 372
30 com.apple.HIToolbox 0x93128ed0 SendEventToEventTarget + 40
31 com.apple.HIToolbox 0x93229ffc SendEventFromMouseDown + 156
32 com.apple.HIToolbox 0x931b6b08 HandleWindowClick + 572
33 com.apple.HIToolbox 0x931b6560 HandleMouseEvent + 456
34 com.apple.HIToolbox 0x931655bc StandardWindowEventHandler + 148
35 com.apple.HIToolbox 0x931229f4 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 692
36 com.apple.HIToolbox 0x9312214c SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 372
37 com.apple.HIToolbox 0x93128ed0 SendEventToEventTarget + 40
38 com.apple.HIToolbox 0x931b5530 HandleMouseEventForWindow(OpaqueWindowPtr*, OpaqueEventRef*, unsigned short) + 236
39 com.apple.HIToolbox 0x931b4aa8 HandleMouseEvent(OpaqueEventRef*) + 368
40 com.apple.HIToolbox 0x9312923c ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 496
41 com.apple.HIToolbox 0x93122c44 DispatchEventToHandlers(EventTargetR -
Pages numbers and keynotes not working on handoff, but everything else is?
Pages numbers and keynotes not working on handoff, but everything else is, map, mail etc. Am I alone?
Really appreciate your help with this. I am a bit of a novice here.. but.. After some more searching on this issue I notice your comments (cut/pasted below) with respect to this router and bridging mode. You mentioned that I should update my firmware on this router and that this would (if I am interpreting your reply correctly) facilitate my LAN to LAN connection and of course using this router simply as an access point and more to the point - having the use of the guest network. So my question is even if I did update firmware, seems I would still require 3rd party software to make this work? (re your last sentence in your comments below) Just need to understand the process and determine whether or not it is worth it (or maybe I should upgrade the router) but I don't want to change the configs of the network wired router at this time... and need to use the E2500 or facsimile as simply an access point with guest network functionality, Thanks much appreciated.
"Again: some E series routers already support wired bridging in firmware, i.e. to use the router as simple access point.
This is and was always possible using a LAN-LAN setup instead.
The problem with the LAN-LAN setup is, however, that you have some limitations accessing the network storage or network printer, e.g. the router doesn't have the correct time and you cannot access the storage from remote using port forwarding through your main router.
These limitations have been overcome with the wired bridge mode (internet connection type = bridge mode).
But again: this has absolutely nothing to do with wireless bridging. That's something completely different and is not supported on Linksys routers in any firmware version so far. To do wireless bridging (i.e. the Linksys routers connects wirelessly to another main router) you need 3rd party firmware." -
Wireless network and bluetooth not working on touchsmart 600
This has not worked since day 1 and I have been using wired internet.
I really need to setup a home network and need to use wireless.
Research on the net has led me to belive I should have HP WIRELESS ASSISTANT on my machine... is that correct?
Everytime I try to download it is seem to be for a notepad... mine is a touchsmart desktop...
Please adviseHi coffee12345,
Welcome to the HP Forums!
I have read your post on your wireless keyboard and mouse not working with your desktop, and I would be happy to help you! To begin, I need to ask you a few introductory questions:
What is the Product and Model Number of your desktop?
What version of Windows are you using?
Is this a recent issue, or has it been like this since day one?
Are you using a USB hub to connect your peripherals or is it directly plugged into the computer?
Please re-post with the necessary information, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
My Ipod is frozen!!! Its a 4th generation and its frozen on an app, Ive tried everything like holding down the lock screen and stuff and its not showing the red thing to slid to shut it down....This is my only thing to use to contact my friends and its not working, i dont have a phone and i cant get one, so this is the onlything i have.....PLEASE HELP!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
When signing a document with Acrobat X...
How do I get rid of the "Standard Text" option on the Appearance drop down menu? I just want to have 1 (one, uno, ein) signature in the drop down menu. I have searched thousands of entries and still I'm unable to ELIMINATE the standard text that seem
-
Audio from the mini to speakers
I use an HP monitor with built-in speakers. The VGA/mini-display port supports the video just great. The audio uses a 3.5mm connector into the audio out port on my brand new mini. It worked fine on my old mini but the new one is silent. THe speak
-
How do I get the contacts number to show next to their name please?
It's my first time having a Blackberry. I have the Curve 8520. I've been trying to work this out for 3 days and it's driving me nuts! What I'm trying to do is to send a text message to my contacts, informing them of my new number. I know I can o
-
I am trying to capture the events in a sub VI. But somehow the event is not being captured. Thanks in Advance LabVIEWan Attachments: New Folder (2).zip 42 KB
-
Query_Regarding_Performance_Monitoring_Traps_on_ASR9K !
Dear All Can anyone please guide me on how to configure ASR9000 to send Performance Monitoring Traps to the SNMP Server ? Regards Varma