Bridge CS3 "Edit Find" not working after optimizing cache.

Power PC G5
Mac OSX v.10.4.11
3GB RAM
Photoshop CS3
After optimizing the cache, my Edit>Find feature does not work. I looked into the Bridge Preferences and could not find anything under Thumbnails or Cache that can turn it back on. Please advise.

Make sure you have Bridge 2.1.1.9.
Purge the cache for each folder through the Tools menu in Bridge.

Similar Messages

Finder not working after installing Leopard!!!

Hi everyone.
I'm getting a strange Finder behavior on my Intel iMac (not the newest version) after installing Leopard. The thing is, after instalation, when I start the computer, the top bar on the screen starts blinking, and there's no way to open a Finder window. And it stays like that forever! I tried to open Finder from the Dock, but the blue dot of the active programs blinks 3 or 4 times and then disapears. Plus, the only way to access the Apple logo on the corner to switch the computer off or restart it, is by opening one other program from the dock (in this case I have Safari running), because this way the top bar stops blinking.
So, I thought I should try to update Leopard to 10.5.1, and this could solve the problem. But no. It searches for new software updates, tells me that there are new updates, but I cannot see them nor install them!
This is really weird and annoying!
Anyone had this problem? Please, help me.
P.S.: Yes, I've tryed a second install of Leopard. Same thing!

anamorphis wrote:
Hi everyone.
I'm getting a strange Finder behavior on my Intel iMac (not the newest version) after installing Leopard. The thing is, after instalation, when I start the computer, the top bar on the screen starts blinking, and there's no way to open a Finder window. And it stays like that forever! I tried to open Finder from the Dock, but the blue dot of the active programs blinks 3 or 4 times and then disapears. Plus, the only way to access the Apple logo on the corner to switch the computer off or restart it, is by opening one other program from the dock (in this case I have Safari running), because this way the top bar stops blinking.
So, I thought I should try to update Leopard to 10.5.1, and this could solve the problem. But no. It searches for new software updates, tells me that there are new updates, but I cannot see them nor install them!
This is really weird and annoying!
Anyone had this problem? Please, help me.
P.S.: Yes, I've tryed a second install of Leopard. Same thing!
Do NOT install any updates until you resolve the problem, which is unrelated to any updates. Updating a computer that is not working correctly will only make the problems worse, never better.
If this is the second install, was it on an erased HD or did you import your previous programs, etc?
It sounds like you might have some errant 3rd party software running.
Did you run a disk check and file permission verify/repair before installing?
Check your startup program window and remove everything there. Write them down so you can put them back later.

Hp dv6t select edition headphones not working after upgrading to windows 8.1

So I upgraded to windows 8.1 from 7 and now when I plug in my earphones there is no audio. I can still hear something when I just use the laptop speakers, just not with earphones. I also don't see the beats audio program on my laptop anymore or the hp support assisstant.

Hi @parjinder82 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue of the Beats Audio not working correctly since you did the update for Windows 8.1 on your HP ENVY dv6t-7200 Notebook. Here is a document to check some settings that might be and issue with the software.
Sometimes the updates have not completely finish. I recommend restarting the Notebook as if there are some updates that have not gone through this will finish them.
You could check what is installed by checking here:
1. Right click speaker icon (right hand corner)
2. Select Playback devices
3. Right click Speakers
4. Enable it and set as Default
5. Click Apply/Ok
You might benefit from this document on Windows updates and sound issues.
Hope this helps.
Let me know, Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Spotlight and finder not working after Yosemite upgrade

Hi,
I just upgrade to 10.10.1 from 10.8 on a Mid 2012 Retina macbook pro, 2.7Ghz i7, 16GB RAM, 750GB SSD drive.
Since upgrading spotlight and finder have stopped working. When I first upgraded I noticed it worked very briefly and found some of my applications, but now nothing. The only thing it does is find the definition of the word I am searching for,
I have
gone in to sys pref > spotlight added and remove all folders and rebooted the machine
gone in to sys pref > spotlight > privacy tab and ensured no folders are in that pane
gone in to sys pref > spotlight > privacy tab and added "documents folder" closed sys prefs rebooted and then removed "documents" folder to try and trigger a re index
gone to terminal and typed "sudo mdutil -E /" which should erase and rebuild the index but i get the error back "Error: Index is already changing state. Please try again in a moment"
gone to terminal and typed "sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.metadata.mds.plist" and then typed "sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.metadata.mds.plist"
go to disk utility and verified my disk which comes back as showing no errors
logged in as another user but spotlight and finder still not working
Any other ideas my laptop is useless for work if I can't find anything,
Thanks

unfortunately I this is still not working, thanks for the link Eric i tried those options, but still the problem remains.
I can clear the cache and re index my mac, and while the system is re indexing spotlight works and I can find material during the reindex. This is obviously limited to the files that have been indexed at the point of using spotlight.
Once indexing has finished if I go to spotlight and try to search for anything, there are no results only the dictionary appears.
At the moment I have to delete the index cache every morning to trigger a re index so I can work, this is terrible and the worst upgrade experience I have had with any OS mac or windows

Text edit app not working after Secupdate 007

Pismo running 10.3.9 showing issues with textedit application which worked fine prior to update.
When attempting to open an existing .txt file the beach ball spins for awhile and then does nothing. Finder window stays in front. When running through the dock, it shows textedit open, but textedit will not appear in menu bar.
I thought it might just be prior documents. After force quitting, I can open text edit app on its own with a new page showing. I can type in it, but when I attempt to save, the same issue shows. It just hangs.
Ran applejack and
I trashed textedit.plist thinking corrupted, but to no avail.
Any ideas on how to get this going?
Thanks!

Hanuman,
If you have cleaned all the possible cache files with AppleJack (plus run the other functions), one possible fix for problems that develop after a Security Update or OSX version update is to download/install the Mac OS X 10.3.9 Combo Update on top of your installed 10.3.9.
http://www.apple.com/support/downloads/macosxcombinedupdate1039.html
If you don't have another User account, create one named 'Test' if you wish, then log into the 'Test' account. If TextEdit works normally, then you know your problem lies in your Home account. A quick and dirty test for solving some problems in your Home account is to go to your Home account <yourusername>/Library and drag the Preferences folder to the desktop, then log out/in to your Home account and see if the problem is resolved. If corrected, the problem lies in the Preferences folder on the desktop. Most prefs will be re-created as you use the computer, but save the old Preferences folder in the event there is one or more pref that you want to stick back in the new Prefs folder.

Photoshop CS3 editing does not work in LR 2.0

Just upgraded to LR 2.0 and did the data base conversion everything works just fine. Btw, I did keep the LR 1.4 installed because I wanted to make sure I have a fallback in case I have a problem with LR 2.0.
I do however have a problem. I cannot edit images in Photoshop CS3. If I select any of the Edit in Photoshop CS3 menu options, CS3 fires up but no image is displayed in Photoshop. I did upgrade CS3 with the latest upgrades available from Adobe. I have no problems editing in CS3 under LR 1.4.
Any suggestion what may cause this?

Mea culpa - I was eyeballing the forum but the word "export" did not ring a bell for the problem I am facing. Thanks for pointing me to the thread covering the problem.

Finder not working after sleep

Whenever my macbook pro 13" late 2011 wakes from sleep, finder no longer works, and I cannot shut down.
I have to force shut down by holding in the power button, and then boot up again.
I'm not a power user, and don't know how to fix the problem.
If anyone has any tips, please let me know.
Thank you.

Hi, did you solved this problem ? Same happen to me, I installed Yosemite, then when I try to restart or shut down the Finder crash, I have to force, but nothing happens, I finish on the power button. Thank you. Plz help me.

Finder not working after update to 10.10.3

I have updated to the latest version 10.10.3 of Yosemite and any task involving the finder now takes several minutes, making my Mac useless. I have plenty of RAM (12GB). I have tried the following:
- Deleted and let the system rebuilt CloudKitMetadata, CloudKitMetadata-shm, CloudKitMetadata-wal and com.apple.finder.plist
- remove some cache:
com.apple.finder
CloudKit > com.apple.finder
CloudKit > com.apple.clouddocs
CloudKit > com.apple.CloudDocs.container-metadata
CloudKit > CloudKitMetadata
CloudKit > CloudKitMetadata-shm
CloudKit > CloudKitMetadata-wal
com.apple.icloud.fmfd
com.apple.iCloudHelper
This has changed nothing.
Thanks to anybody for suggestion.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then take an action that isn't working the way you expect. Select any lines that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.
When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created.

Bridge CS3- My find command has quit working, any help?

In my Bridge CS3 the find command cannot find any of the keywords that I spent hours adding. It has been working fine, but one day stopped. I have deleted the plist, the cache, and the recent workspace to no effect. I have not added any new software recently. It doesn't work if I am searching a file that I have open in Bridge so it is not a matter of not waiting long enough for the thumbnails to generate. Those were the only suggestions I found anywhere. Does anyone have any other suggestions? I am running this on a Mac if that makes a difference.

I may have to upgrade as you suggest. I did find one thing that is interesting, though it doesn't explain where the problem comes from. If I open a folder in Bridge that holds files that I have added keyword to, when I close it Bridge can find those files with the find command. I am not sure why opening the folders would make a difference, but it seems to. This only works one when searching one sub-folder deep. If there is another folder in that, even though I've opened it, it will not find it.
I guess until I am ready to spend the money to upgrade I will spend an evening opening all my keyworded folders. I better find a good video to watch while doing it!

"Find Form" calendar is not working after migration

Hi,
We have migrated from Oracle 9i to 10g.we have one form ''FormA" and "find form" for that FormA.Calendar functionality is present in both FormA and "Find FormA".if we try to use calendar functionality in "Find formA",its giving error like FRM-40104 - No such block calendar,FRM-40105(unable to resolve reference to item claendar.cell1.........),FRM-41045 (cannot find item - invalid id).Actually this scenario is not working after migrating the FORMS application to 'OAS10.1.2' from 'OAS904' .
In 'OAS904' ,The calendar item is present in the 'FormA' form, the 'calendar.show' hides the "Find FormA" and appears in the FOrmA and uses FormA's calendar item and after selecting the date,the date s applied to the "Find FormA"
But after migration, the "Find FormA" is not hiding, so its not able to retrieve the calendar properties.Because the calendar is present in "FormA".
Any problem with pll files like 'qmslib65','qmsolb65',qmsevh65'??
please help me by providing suggestions.
Thanks

qmslib65','qmsolb65',qmsevh65Are these libraries self-written or from some third-party tool?

Caller Id not working after update

My caller id pictures are not working after the update.

Still having the same problem. It appears to be a problem with City ID. Local Verizon office told me it could be uninstalled. I can't seem to find out how to uninstall an application that has the uninstall button "greyed out". After forcing stop the application, it turns itself back on after every call. When that happens I lose the city the call is coming from, but I still get the number showing. Other times I don't receive anything. I NEVER know who's calling me and it's getting annoying. Hell, with AT&T, I knew who was calling me....just couldn't stay connected. Now if I miss a call..I don't have any clue as to who to call back.
Get this City ID crap app off my phone....that's all I want...it's not too much to ask....please...!

HP SimplePass Reader Does not Work after Sleep

I have only had my laptop for a week - the fingerprint reader stopped working 2 days after I bought it. I have tried everything: removing and re-installing various drivers and software, stopping and starting Credentials Manager, unchecking the box that allows the computer to turn the reader off to save power, etc.
I have gotten it to the point where it functions when the computer is logged in, but not after sleep. It works once if you restart the computer, but after waking it from sleep it does not initialize. (no light or anything) However, if you "lock" the desktop from the start menu, the reader will log it in again. (without closing the lid or putting it to sleep)
Simple Pass version 6.0 (latest downloaded from HP.com)
Envy Dv6 7229wm
Windows 8 64-bit
Thanks

Hello hawvi,
I see that you are having problems with the fingerprint reader not working after returning from sleep mode. I would like to help with this issue but I need some information.
Can you provide the full model and product number of the computer? Here is a link that shows how to find that information.
What operating system are you using?
How long have you had the problem?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Ipohone 4 hotspot not working after upgrading to ios7.1 ?

my ipohone 4 hotspot not working after upgrading to ios7.1 but my some friends having iphone 4s its works fine and those having iphone 4 it's not working although we all have same operator and same operating system (i.e ios 7.1).I think this is problem only with iphone 4 users with ios 7.1 , so apple plz fix it in ur next update.

You don't like the answer?
Again it's not a bug, use a supported carrier if you want Personal Hotspot.
Read the list one more time, if carrier is not on the list, IOS7.1 patch the loophole.
Message was edited by: ckuan

Hp Mini 110 1013tu Keyboard is Not working after upgrade to win 7

Hello need help on weird happenings to my keyboard..
Before i upgrade the Operating System From Windows XP to Windows 7 the Hp Mini 110 is working fine..
All keys on keyboard is working and touchpad is also working.
But after upgrading to windows 7 some keys on keyboard are not working like z,x,c,v, left ctrl and other more keys..
what do you think is the problem??
Hardware Issue? or Driver Issue?
please help thank you..

Hello @MysticDragon ,
Welcome to the HP Forums!
I understand some of the keys on your keyboard are not working after installing Windows 7.
I do not see any drivers available for your notebook for Windows 7 on the HP website, so their might be some compatibility issues as it's going to rely on Windows update to find current drivers. This doesn't mean it will not work, but I cannot say for sure that it will.
Try this:
1. Click Start.
2. Click Control Panel.
3. Click Clock, Language, and Region.
4. Click Region and Language.
5. Click the Keyboards and Languages tab.
6. Click Change keyboards...
7. On the General tab, make sure English (United States) - US is selected in the Default input language field.
8. Click on any other keyboards in the Installed services list.
9. Click Remove.
10. Repeat for all other non-English (United States) keyboards.
You may also want to try rolling back to Windows XP and see if the issue persists. It is possible the issue is coincidental and not the direct result of the update to Windows 7.
Let me know if this works!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Microsoft Excel 2013 add-in not working after update

I have originally posted this question at answers.microsoft.com and have been re-directed to post here. (http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/microsoft-excel-2013-add-in-not-working-after/298aff03-c90a-4a2a-b67b-07b6f3c7648c)
We are an organization with over 200 users and are currently using Microsoft Office 2013 (Click-to-run install via Office 365 portal), we have noticed that in Excel when we apply the monthly Office update, the add-in (e.g. Analysis Toolpak) would stop working
with the following error message displayed.
I tried updating from 15.0.4631.1004 to 15.0.4641.1003,
15.0.4641.1003 to 15.0.4649.1004, they all gave the same results.
I have checked the captioned file path and it is indeed missing, I think the update mechanism messed up the add-in somehow, a full re-install would fix it as quick or online repair is not doing the trick. This is not the only add-in it is affecting
as there are some 3rd party add-ins are affected as well.
Please advise how we can fix this without needing to re-install Microsoft Office. Thank you!

I don't have 365 or C2R so I can't address your main question, so just a few thoughts which may not be applicable in your setup.
Check the addin manager to see if your addins are listed and ticked. If listed (ticked or not) check the registry to see where the location is written, if ticked look here
HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Excel\Options
and look for keys named OPENx, where x is the order number the addin is loaded
if not "ticked" instead of \Options look in \Add-in-Manager
With a VBA macro or in the VBE's immediate window return
Application.LibraryPath
Assuming you found a listing in the registry do the paths match, if not look in the .LibraryPath to see if the addins got unloaded there into the subfolder \Analysis
If you find the file(s) try un-installing and reinstalling the addins, but browse to the actual folder don't simply tick. If you can't find the files, copy them (from a different system) to the folder indicated by .LibraryPath. In the addin manager uninstall
them if installed, close the manager, open it again and the addins should be listed, tick to re-install.
You say your other addins don't work, I wonder if some mixup has occurred with what Excel thinks is the default path, but note for other addins the default addins path is returned by app.UserLibraryPath
Are you using a Chinese system?

Bridge CS3 "Edit Find" not working after optimizing cache.

Similar Messages

Maybe you are looking for