Broadcasting a Query to KM Folder in SAP EP

Hi ,
I tried to Broadcast a Bex Query to Knowledge Managment Folder in SAP EP.The Problem is i have provide a Filter Value for a Characteristic after when i schedule the Setting .The file is Not found in SAP EP KM folder.If i Schedule the setting without NO FILTER option .The File is broadcasted,with filter of characteristic the File is Not broadcasted.
Broadcasting Settings .
Distribution Type : BroadCast to Portal
Output format : PDF.
Export Document to Other Folder : Location of the Folder in SAP EP.
If the
Filter Navigation : No Filter
File is gets Broadcasted to the Folder
If the
Filter Navigation : Say REGION restriction with a selected Value.
File Broadcasting Fails.
Schedule settings in Same Day 1 minute delay.
Could Some one Propose a Soltion at earliest.
Thank You.
Balakumar G.

Balakumar,
did you select region from a value help or type it in ..? and also check if the variant you have created for the scheduling has the variable values in it ...
It could be that the variable is mandatory and the broadcast setting has not saved the value into it??

Similar Messages

How to add new folder in sap menu visible to all users

I want to add a new folder in sap menu. i can do it for my user id as it is user specific. I wanna know that how to add a folder so that every user able to see the same i.e irrespective of user-ids.

Hi Ramya,
This can be done in SAP menu instead of User Menu, provided all your users are using SAP menu. If a folder is created in User menu it would be visible only to the user. If it is created in SAP menu and if all the users are using the SAP menu then the folder would be visible to all...
Hope this clarifies your query...
Reward me points...
Regards
Prasanna

Schedule Broadcaster for Query

Hi,
How can I schedule Broadcaster for Query to fill OLAP Cache?
Regards,
Shabbar

<b>Pre-requisite</b>You have chosen the distribution type Fill OLAP Cache. The output format is OLAP Cache Content.
http://help.sap.com/saphelp_nw04s/helpdata/en/2a/b37f425b595551e10000000a1550b0/content.htm
Hope it Helps
Chetan
@CP..

Broadcasting to Enterprise Portal using Bex Broadcaster from Query Designer

I have already been able to broadcast from Query Designer using BEx Broadcaster to the portal based on a role or a user.
I select "Export into Enterprise Portal" as the Distribution Type.
I then select "Export Document to Personal Portfolio" and then enter a role.
Then I check "User-specific" because I want it to be user specific.
This all works fine.
Now I get to my question.
Can I go one step further and broadcast to a folder call... lets say "Sales" inside of their Personal Portfolio?

Hi Eric,
I have the same problem. Were you able to resolve it?

Querying items in folder doesn't work in SharePoint 2013 (Cloud)

Hi,
I have 2 folders in a SharePoint List. Every folder contains 2555 items. There is only one column "Title" . I have indexed the "Title" column. The title field contains same values as "Hello" for each and every record.
I am querying the first folder and it throws following exception that
"An unhandled exception of type 'Microsoft.SharePoint.Client.ServerException' occurred in Microsoft.SharePoint.Client.Runtime.dll
Additional information: The attempted operation is prohibited because it exceeds the list view threshold enforced by the administrator."
But If I add a new item with "Title"="World" in both the folders, and query the first folder, putting the condition that get count where "Title" = "World", it works fine and the count returned is "1".
Can anybody please tell me, why I get the exception and what is the fix for that.

Hey Ravi,
Threshold can not be modified in
Office 365/SharePoint Online. Have below link for more details and workarounds.
http://support.microsoft.com/kb/2759051
SharePoint Online 2010 List View Threshold
http://community.office365.com/en-us/f/148/t/79787.aspx
Thanks.

How to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3

Dear All,
Please let me know the process how to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3 .
Currently I am getting Only 4 columns and 10 rows in One Page .And I am getting 1,2 etc tabs for both row and column. So i want to increase the column length more than 100 and row length more than 10000.
Please suggest me a suitable solution to over come this issue.
Please find the Below screen shot.
Thanks
Regards,
Sai

Dear All,
Please find the attached screen shot.
The report be open with 4 or 5 columns and 5 or 6 rows.
So, please let me know how to increase the length of the table.
Do the needful for me to over come this issue.
Thanks
Regards,
Sai.

Issue with Broadcasting a query as xml(excel) in BI 7

Hi All,
I have a question.When I try to broadcast my query as xml using the Filter Navingation tab provided by broadcaster and I select a paritcular characteristic and select multiple values .The receipent gets an email but for each of the values selected , he gets a different report.I need to get just one report for all of the filter selections.
i.e. For example i select 3 values for a a particular characteristic , when i execute the setting , the report is filtered for each of these values but i get 3 different excel files.I want to get only one for all of these selections.Can it be done?
Can anybody help? would really appreciate it and assign points.
Regards
Abyie

Please can anybody help? its urgent.
Thanks
Abyie

Information Broadcasting ( sending query in ( HTML format) )

Hi Experts,
I am trying to broadcast one query through Bex Broadcaster in Query Designer.
While doing so it asked for e**l address and for testing purpose i gave my e*il address only.
But I haven't got any mail yet.
I checked in SU01 my m**l id is updated there.
I checked all authorisations its there in PFCG.
While scheduling it was showing CET time format ( 3.5 hrs before us).
So I gave time according to that format only.
Please guide me If I am missing anything.
Quick reply is much appreciable.
Thanks,
Uday.

Hi Murali,
I checked in the error log it is giving following error :-
An error occurred in program CL_SMTP_RESPONSE
Error text: ESMTP error code is not known.
Additional information:
554
554 Mail from ************@wipro.com rejected for
If you have any solution please reply to me.
Is there anything to be done in function module SO_OBJECT_SEND..
Thanks,
Uday.

Add query to Main menu in SAP 2007

Hi all!
Can i add query to main menu in SAP 2007. Now, i only add done query to My menu.
Thank you!

Hi Tien,
You cannot add the Query to the main menu.you can try the other way round. Paste the query in the crystal report and then check the report is comming OK. Then add it to the main menu via crystal Reports.
Regards,
Raj

How can I declare shared folder in SAP transaction AL11

Hi,
In Application Adapters Guide for ODI (downloaded from Oracle Homepage) have a paragraph:
"the shared folder needs to be declared in SAP transaction AL11 and the folder opens successfully in AL11"
if my folder for share is: C:\ABCFolder
how can I declare the shared folder in SAP transaction AL11, and how to open it ?
Thanks for reply.

Hi,
Once you delete the session in SM35, it is not possibel to restore it back.
Check if you have also deleted the logs? Logs can exists after deleting the Session, provide you have not deleted the logs too.
It is not possible to create one more session using AFAB.
still if you want to do it, then in the selection screen at least change one of the parameter (Company code, Fiscal year, Posting period).
IF you still do not want to change the above input parameters, then there is another option, i.e. create a new assest and then run the AFAB with the radio button in REPEAT RUN.
Hope this is clear
BR
Sree

Information Broadcasting & Archiving: Query reports need to be Archived

Hi All,
The requirement is that , we need to broadcast query reports in Bex 7.0 to be archived as a pdf.
Please note that this is not Data archiving. We need to archive only query reports.
We need to make sure that pdf gets generated in Background and report selections variant can be used in Background.How can we achieve this?
Alternatively ,Please suggest useful articles, that will be of help in this.
Thanks in Advance ,

archiving data is plausible -
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/asug-biti-03/sap%20bw%20archiving%20and%20data%20aging%20strategies
Not sure why you want to archive the reports in PDF, also at what point?? is it on the application sever ???
Hope it Helps
Chetan
@CP..

Help Required -- Can we use SQL Query to READ data from SAP MDM Tables

Hi All,
Please help.........
Can we use SQL Query to READ(No Creation/Updation/Deletion just Read) Data from SAP MDM tables directly, without using MDM Syndicator.
Or direct SQL access to SAP MDM tables is not possible. Only through MDM Syndicator can we export data.
Thanks in Advance
Regards

All the tables you create in Repository comes under A2i_CM_Tables in Database named as your repository name. So the tables names are fields of table A2i_CM_Tables. Now i tried it but cant make it.
Now, I dont think its possible to extract all fields in tables and there values using select query. May be pure sql guy can do that or not.
But there is no relation of data extraction and syndicator. Data is viewed in Data Manager. and you can also store data in a file from DM also.
BR,
Alok

Query for Vendor Payment in SAP

Hello All,
I am a sap abap developer with little knowledge in SAP MM and SAP FI modules.
As per some requirement of my company ,i have created a PO then its GR and finally IR.
Now when i checked EKBE table (History per Purchasing Document) , i found two record in this table out of which one with
VGABE = 1 (Good Receipt) & another with VGABE = 2 (Invoice Receipt) .
Now my requirement is ,i want a entry in this table with VGABE = 5 (Payment) but i don't know how to do payment of vendor in sap so that this table will populate with a entry for payment type.
Please help me and let me know what will be the flow with tcodes to do the vendor payment in sap.
Please reply ASAP.
Thanks in advance.
Regards.
Abhinav Goel.

Hello Mr.Raman,
Thanks for your response to my query.
As per my company requirement i have to track duplicate payment made to the vendor against same PO.
So for that after completing the cycle PR-PO-GR-IR-F-53 finally i found two records in BSAK table out of which :
One record was with my accounting document no from my invoice receipt of type RE.
Another record was with the vendor payment clearance document with type KZ.
Now again i have done payment to the vendor using F-53 tcode and now i found one more record with belnr = last payment document no and augbl = new payment document no. with type KZ.
So if i use below mentioned logic to track for duplicate payments made to the vendor ,then it will be fine or if not can you suggests me the needful changes in the logic.
1.) Check If record exists for my belnr no from invoice recipt in bsak.
2.) Take AUGBL No for this BELNR No and check if record exists for this AUGBL with type KZ.
Note:Means payment is done to the vendor upto this logic.
3.) Now if with the found record with type KZ any other record found with type KZ it can be taken of as duplicate payment made to the vendor.
Please suggest me if above mentioned logic is fine.
Regards.
Abhinav Goel.

SAP Query - Adding new fields to SAP query

Hi experts,
I got an issue to work on SAP query.
I have Transaction code and need to know the infoset to add additional two fields to the existing output.
Please let me know how to find infoset/ Query for the specfic transaction and how to add fields.
Regards,
Venkata

first check the transaction code given to you.. if it is report transaction (check using SE93), then get the report name for example AQFKTES_SGS_IV==MMIV0003======, then after aQFK,TES_SGS_IV woulbe be your user group and MMIV0003 would be your query. Now go to SQ03 with the user group (you need to check the query areas also which would be Environment---> query areas) because some can be client depended some can be just cross client. and then go to sq01 from user group. It will direct you to the queries of the user group you mentioned in SQ03. Now you should be able to find the query you are looking for. The infoset will also be displayed linked to the query. The infoset can be displayed via SQ02 transaction.
If it is parameter transaction code, you need to check the parameter values to find the query details. Rest of the approach is same as mentioned above.

Creating documents in shared folder of SAP mail

Hi all,
I would like to create documents in a shared folder of my sap mail. I know it can be done by method create of object SOFM. I just don't know how to set up this method. What parameters are needed and how to do it correctly.
Thx for helping,
Yoolb

Hi Yoolb,
Are you trynig to do this within a Workflow? If your need is to create the document from a custom program, you can use the function module SO_DOCUMENT_INSERT_API1.
Cheers,
Ramki Maley.
Please reward points if the answer is helpful.
For info on awarding points click on this link: https://www.sdn.sap.com/sdn/index.sdn?page=crp_help.htm

Broadcasting a Query to KM Folder in SAP EP

Similar Messages

Maybe you are looking for