Browser is not working properly
default browser is not working properly .....
closed on few second !!!!!!!
what the solution?
Hi and Welcome to the Community!
Anytime random strange behavior or sluggishness shows up, the first thing to try is a proper reboot:
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. If this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Onclick Open Browser Window not working properly in IE
I am having one last problem with my site. Everything works just fine in Firefox, but not in IE. In IE the browser window is wider than the image. On each thumbnail there's an image map with the following coding:
<div id="bead1"><img src="images/t_bead1border.jpg" alt="bead 1" width="74" height="108" border="0" usemap="#Map" />
<map name="Map" id="Map">
<area shape="rect" coords="-24,-10,106,143" href="javascript:void()" onclick="MM_openBrWindow('gallery_bead1.html','','width=225,height=360')" />
</map></div>
Here's a link to the site:
http://www.susieharperdesigns.com/gallery_beads.html
Any help is greatly appreciated, thanks.Old Shoe wrote:
Here's my link: http://www.progressity.com/GW
On the John Calipari testimonial link a browser window pops up and plays fine in FF. In IE the window pops up but the main page changes too.
i tested in my window operating system computer, works fine , didnt see any changes -
ADF Table with browser zoom not working properly
Hi All,
I am using ADF Table to show data from database. I am using JDeveloper 11.1.1.4.0.
When user uses browser zoom functions (i.e. Ctrl + or Ctrl -) for zoom in or zoom out, The UI of Table disturbed and columns are not in line.
Here is the snapshot of disturbed table image http://i.imgur.com/07YfB.jpg
I have tested it with Firefox and Internet Explorer and in both the cases if you zoom in the columns are not in line anymore.
I have added *<accessibility-profile>large-fonts</accessibility-profile> into trinidad-config.xml* and
tried but it gives me the same result.( Reference Oracle Docs http://docs.oracle.com/cd/E16162_01/web.1112/e16181/af_access.htm#BEIDFIIB )
Can anyone suggest solution for how to solve this problem so that the columns will be is line when uses browser's zoom?
Thanks in advance,
ViralHi,
I am not using any kind of css for table.
It is default skin and defalut table properties that ADF provides.
- Viral -
My Safari browser is not working properly. Any suggestions?
When I access my online banking site. I can no longer view and pay bills. Each time I click on that option, the browser goes right back to the opening login screen. I have tried a different account and the same thing occurs. This started after I clicked on an option to remove the enhanced login (quicker access). I can use a different browser like Chrome and it works fine. Something has flipped a switch in my Safari browser. I tried reseting, deleting all cookies, and emptying the cache to no avail. Any suggestions?
Removed all website data. Didn't make a difference.
I am having the same problem on my Mac Pro. My old G4 tower running 10.5.8 has no issue.
Here is the error being generated:
3Unsafe JavaScript attempt to access frame with URL https://bankname.billdomain.com/BankName/SignOn from frame with URL https://www.bankname.com/olb/billpay/billPaymentsSso. Domains, protocols and ports must match.
(I have inserted the generic BANKNAME for the real bank name)
I'm no rocket surgeon but it looks to me like the bank code weenies are writing some crappy code.
I have had the same results with Chrome, Firefox and SAfari -
Not working properly Computer Browser service in Windows Server 2012
Good afternoon.
Migrated from 2003 to 2012 Active Directory, all is good, but the service Computer Browser in Windows Server 2012 is not working properly.
Online, there are several hundred computers, one network, no segments. PDC is the Master Browser, it is in my list of all the computers, but gives customers or Backup Browser computers only part, and in alphabetical order, giving the first 70 computers and
all.
Looked packet sniffer:
Microsoft Windows Lanman Remote API Protocol
Entry Count: 70
Available Entries: 251
So on Master Browser shows 251 computer, and the client 70.
If disabled on Windows Server 2012 Service Computer Browser, Master Browser is a computer running Windows Server 2003. He gives all computers.
What is the problem, how to get Windows Server 2012 to work correctly as a Master Browser?More info. I have high lighted in bold where the issue is. This is a massive headache for me at the moment
Frame: Number = 377, Captured Frame Length = 182, MediaType = ETHERNET
- Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-13-72-52-6E-A1],SourceAddress:[00-1E-0B-2B-68-DD]
- DestinationAddress: Dell Inc. 526EA1 [00-13-72-52-6E-A1]
Rsv: (000000..)
UL: (......0.) Universally Administered Address
IG: (.......0) Individual address (unicast)
- SourceAddress: 001E0B 2B68DD [00-1E-0B-2B-68-DD]
Rsv: (000000..)
UL: (......0.) Universally Administered Address
IG: (.......0) Individual address (unicast)
EthernetType: Internet IP (IPv4), 2048(0x800)
- Ipv4: Src = 10.44.46.101, Dest = 10.44.44.14, Next Protocol = TCP, Packet ID = 14025, Total IP Length = 168
- Versions: IPv4, Internet Protocol; Header Length = 20
Version: (0100....) IPv4, Internet Protocol
HeaderLength: (....0101) 20 bytes (0x5)
- DifferentiatedServicesField: DSCP: 0, ECN: 0
DSCP: (000000..) Differentiated services codepoint 0
ECT: (......0.) ECN-Capable Transport not set
CE: (.......0) ECN-CE not set
TotalLength: 168 (0xA8)
Identification: 14025 (0x36C9)
- FragmentFlags: 16384 (0x4000)
Reserved: (0...............)
DF: (.1..............) Do not fragment
MF: (..0.............) This is the last fragment
Offset: (...0000000000000) 0
TimeToLive: 128 (0x80)
NextProtocol: TCP, 6(0x6)
Checksum: 0 (0x0)
SourceAddress: 10.44.46.101
DestinationAddress: 10.44.44.14
- Tcp: Flags=...AP..., SrcPort=65372, DstPort=NETBIOS Session Service(139), PayloadLen=128, Seq=1910965363 - 1910965491, Ack=580319796, Win=252 (scale factor 0x8) = 64512
SrcPort: 65372
DstPort: NETBIOS Session Service(139)
SequenceNumber: 1910965363 (0x71E70473)
AcknowledgementNumber: 580319796 (0x2296FA34)
- DataOffset: 80 (0x50)
DataOffset: (0101....) 20 bytes
Reserved: (....000.)
NS: (.......0) Nonce Sum not significant
- Flags: ...AP...
CWR: (0.......) CWR not significant
ECE: (.0......) ECN-Echo not significant
Urgent: (..0.....) Not Urgent Data
Ack: (...1....) Acknowledgement field significant
Push: (....1...) Push Function
Reset: (.....0..) No Reset
Syn: (......0.) Not Synchronize sequence numbers
Fin: (.......0) Not End of data
Window: 252 (scale factor 0x8) = 64512
Checksum: 0x6F65, Disregarded
UrgentPointer: 0 (0x0)
TCPPayload: SourcePort = 65372, DestinationPort = 139
- Nbtss: SESSION MESSAGE, Length =124
PacketType: SESSION MESSAGE, 0(0x00)
- Flags: Add 0 to Length
Reserved: (0000000.)
Extension: (.......0)Add 0 to Length
Length: 124(0x7C)
- SMB: C; Transaction, Remote Administration Protocol, FileName = \PIPE\LANMAN
Protocol: SMB
Command: Transaction 37(0x25)
- NTStatus: 0x0, Facility = FACILITY_SYSTEM, Severity = STATUS_SEVERITY_SUCCESS, Code = (0) STATUS_SUCCESS
Code: (................0000000000000000) (0) STATUS_SUCCESS
Facility: (...0000000000000................) FACILITY_SYSTEM
Customer: (..0.............................) NOT Customer Defined
Severity: (00..............................) STATUS_SEVERITY_SUCCESS
- SMBHeader: Command, TID: 0x2001, PID: 0x276C, UID: 0x3801, MID: 0x0140
- Flags: 24 (0x18)
LockAndRead: (.......0) LOCK_AND_READ and WRITE_AND_UNLOCK NOT supported (Obsolete) (SMB_FLAGS_LOCK_AND_READ_OK)
NoAck: (......0.) An ACK response is needed (SMB_FLAGS_SEND_NO_ACK[only applicable when SMB transport is NetBIOS over IPX])
Reserved_bit2: (.....0..) Reserved (Must Be Zero)
CaseInsensitive: (....1...) SMB paths are case-insensitive (SMB_FLAGS_CASE_INSENSITIVE)
Canonicalized: (...1....) Canonicalized File and pathnames (Obsolete) (SMB_FLAGS_CANONICALIZED_PATHS)
Oplock: (..0.....) Oplocks NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK)
OplockNotify: (.0......) Notifications NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK_NOTIFY_ANY)
FromServer: (0.......) Command - SMB is being sent from the client (SMB_FLAGS_SERVER_TO_REDIR)
- Flags2: 51207 (0xC807)
KnowsLongFiles: (...............1) Understands Long File Names (SMB_FLAGS2_KNOWS_LONG_NAMES)
KnowsEas: (..............1.) Understands extended attributes (SMB_FLAGS2_KNOWS_EAS)
SmbSecuritySignature: (.............1..) Security signatures enabled (SMB_FLAGS2_SMB_SECURITY_SIGNATURE)
Compressed: (............0...) Compression Disabled for REQ_NT_WRITE_ANDX and RESP_READ_ANDX (SMB_FLAGS2_COMPRESSED)
SecuritySignatureRequired: (...........0....) Security Signatures are NOT required (SMB_FLAGS2_SMB_SECURITY_SIGNATURE_REQUIRED)
Reserved_bit5: (..........0.....) Reserved (Must Be Zero)
IsLongName: (.........0......) DO NOT use Long File Names (SMB_FLAGS2_IS_LONG_NAME)
Reserved_bits7_9: (......000.......) Reserved (Must Be Zero)
ReparsePath: (.....0..........) NOT a Reparse path (SMB_FLAGS2_REPARSE_PATH)
ExtendedSecurity: (....1...........) Aware of extended security (SMB_FLAGS2_EXTENDED_SECURITY)
Dfs: (...0............) NO DFS namespace (SMB_FLAGS2_DFS)
Paging: (..0.............) Read operation will NOT be permitted unless user has permission (NO Paging IO) (SMB_FLAGS2_PAGING_IO)
NTStatus: (.1..............) Using 32-bit NT status error codes (SMB_FLAGS2_NT_STATUS)
Unicode: (1...............) Using UNICODE strings (SMB_FLAGS2_UNICODE)
PIDHigh: 0 (0x0)
SecuritySignature: 0x0
Unused: 0 (0x0)
TreeID: 8193 (0x2001)
ProcessID: 10092 (0x276C)
UserID: 14337 (0x3801)
MultiplexID: 320 (0x140)
- CTransaction:
WordCount: 14 (0xE)
TotalParameterCount: 32 (0x20)
TotalDataCount: 0 (0x0)
MaxParameterCount: 8 (0x8)
MaxDataCount: 4200 (0x1068)
MaxSetupCount: 0 (0x0)
Reserved: 0 (0x0)
- Flags: Do NOT disconnect TID
Disconnect: (...............0) Do NOT disconnect TID
NoResponse: (..............0.) Server response to the client
Reserved: (00000000000000..) Reserved
Timeout: 5000 milli sec(s)
Reserved2: 0 (0x0)
ParameterCount: 32 (0x20)
ParameterOffset: 92 (0x5C)
DataCount: 0 (0x0)
DataOffset: 0 (0x0)
SetupCount: 0 (0x0)
Reserved3: 0 (0x0)
ByteCount: 61 (0x3D)
- RemoteAPIBuffer:
- FileName: \PIPE\LANMAN
- Align: 1 Bytes
AlignBytes: Binary Large Object (1 Bytes)
Name: \PIPE\LANMAN
Pad1: Binary Large Object (2 Bytes)
- RAPRequest: NetServerEnum2 Request, InfoLevel = 1, SV_TYPE_ALL: All in NSNET
RAPOpcode: NetServerEnum2
- ParameterDescriptor: WrLehDz; 4 send, 1 receive parameter
Param: (W) WORD (send parameter, 16 bit integer)
Param: (r) Receive buffer (format in data descriptor) (receive data, 0 bit integer)
Param: (L) Receive buffer length (send/receive parameter, 16/16 bit integer)
Param: (e) Entries read (receive data, 0 bit integer)
Param: (h) WORD (receive parameter, 16 bit integer)
Param: (D) DWORD (send parameter, 32 bit integer)
Param: (z) ASCIIZ (send parameter, 8 bit integer)
Param: ASCII NUL (string terminator)
- DataDescriptor: B16BBDz; data bytes send: 0, receive: 34
- Datum: (B) BYTE[16] (receive data, 8 bit integer)
Datum: (B) BYTE (receive data, 8 bit integer)
Digit: 1
Digit: 6
Datum: (B) BYTE (receive data, 8 bit integer)
Datum: (B) BYTE (receive data, 8 bit integer)
Datum: (D) DWORD (receive data, 32 bit integer)
Datum: (z) ASCIIZ* (receive data offset, 32 bit integer)
Datum: ASCII NUL (string terminator)
- NetServerEnum2: SV_TYPE_ALL: All in NSNET
InfoLevel: (1) SERVER_INFO_1
ReceiveBufferSize: 4200 (0x1068)
- ServerType: SV_TYPE_ALL: All
Workstation: (...............................1) All workstations
Server: (..............................1.) All computers with the server service running
Sqlserver: (.............................1..) All running Microsoft SQL Server
DomainCtrl: (............................1...) All primary domain controllers
DomainBakctrl: (...........................1....) All backup domain controllers
TimeSource: (..........................1.....) All Time servers
AFP: (.........................1......) All Apple File Protocol servers
Novell: (........................1.......) All Novell servers
DomainMember: (.......................1........) All LAN Manager 2.x domain members
PrintqServer: (......................1.........) All print servers
DialinServer: (.....................1..........) All dial-in servers
ServerUnix: (....................1...........) All Unix/Xenix servers
NT: (...................1............) All Windows NT workstations or servers
WFW: (..................1.............) All Windows for Workgroups servers
ServerMFPN: (.................1..............) All Microsoft File and Print for NetWare servers
ServerNT: (................1...............) All non-domain controller servers
PotentialBrowser: (...............1................) All servers that can run the browser service
BackupBrowser: (..............1.................) All backup browsers
MasterBrowser: (.............1..................) All master browsers
DomainMaster: (............1...................) All domain master browsers
Reserved1: (..........11....................)
Windows: (.........1......................) All Windows 95 or later
DFS: (........1.......................) All DFS root servers
ClusterNT: (.......1........................) All NT Clusters
Terminalserver: (......1.........................) All Terminal Servers
ClusterVSNT: (.....1..........................) All NT Cluster Virtual Server Names
DCE: (....1...........................) AllIBM DSS (Directory & Security Services)
Reserved2: (...1............................)
AlternateXport: (..1.............................) Return list for alternate transport
LocalListOnly: (.1..............................) Return local list only
DomainEnum: (1...............................) Enumerate primary domain
Domain: NSNET
Then the reply;
Frame: Number = 378, Captured Frame Length = 1514, MediaType = ETHERNET
+ Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-1E-0B-2B-68-DD],SourceAddress:[00-13-72-52-6E-A1]
+ Ipv4: Src = 10.44.44.14, Dest = 10.44.46.101, Next Protocol = TCP, Packet ID = 27036, Total IP Length = 1500
+ Tcp: Flags=...A...., SrcPort=NETBIOS Session Service(139), DstPort=65372, PayloadLen=1460, Seq=580319796 - 580321256, Ack=1910965491, Win=253 (scale factor 0x8) = 64768
+ Nbtss: SESSION MESSAGE, Length =2013
+ SMB: R; Transaction, Remote Administration Protocol
- RAPResponse: NetServerEnum2 Response, Count = 31
Win32ErrorCode: 0x00000000 - ERROR_SUCCESS - The operation completed successfully.
Converter: 2251 (0x8CB)
- NetServerEnum2: Count = 31
EntriesReturned: 31 (0x1F)
EntriesAvailable: 31 (0x1F)
+ NetServerInfo1: APOLLO
+ NetServerInfo1: ARTEMIS
+ NetServerInfo1: ASKLEPIOS
+ NetServerInfo1: CASTOR
+ NetServerInfo1: DCC4503-131L
+ NetServerInfo1: DCC4503-155L
+ NetServerInfo1: DCC4503-157L
+ NetServerInfo1: DCC4503-161L
+ NetServerInfo1: DCC4503-171L
+ NetServerInfo1: DCC4503-172L
+ NetServerInfo1: DCC4503-175L
+ NetServerInfo1: DCC4503-177L
+ NetServerInfo1: DCC4503-183L
+ NetServerInfo1: DCC4503-184L
+ NetServerInfo1: DCC4503-185L
+ NetServerInfo1: DCC4503-188L
+ NetServerInfo1: DCC4503-196L
+ NetServerInfo1: DCC4503-197L
+ NetServerInfo1: DCC4503-199L
+ NetServerInfo1: DCC4503-202L
+ NetServerInfo1: DCC4503-203L
+ NetServerInfo1: DCC4503-205L
+ NetServerInfo1: DCC4503-210L
+ NetServerInfo1: DCC4503-213L
+ NetServerInfo1: DCC4503-219L
+ NetServerInfo1: DCC4503-220L
+ NetServerInfo1: DCC4503-228L
+ NetServerInfo1: DCC4503-233L
+ NetServerInfo1: DCC4503-234L
+ NetServerInfo1: DCC4503-236L
+ NetServerInfo1: DCC4503-241L
StringData: Binary Large Object (586 Bytes) -
pointer moves around the page but unable to select using the pointer.each time i had to press backspace to type something on the search box.i cannot get a dropdown box in gmail to sign out because of pointer not working properly.how do i rectify it??????????
You may have switched on caret browsing.
*http://kb.mozillazine.org/accessibility.browsewithcaret
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
*Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
*http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
*http://kb.mozillazine.org/Accessibility_features_of_Firefox -
Hi Apple Team,
Sharepoint 2010 windows authendication(NTLM) is not working properly in IPad safari browser. When I enter the user name and password the page is keep on loading it never completes the page load. I installed chrome browser on my Ipad and opened my sharepoint windows authentication site it is working fine.
Device : IPad 2
OS : IOS 7.0.6
Thanks,
BaskarHi Suhasini,
Please refer below links for your issues. It seems you are having problem with 32 bit and 64 bit component in office and IE.
http://howididit-sharepoint.blogspot.in/2012/04/datasheet-view-not-working.html
http://alpesh.nakars.com/blog/datasheet-view-does-not-work-in-sharepoint-2010/http://support.microsoft.com/kb/2266203
Thanks and Regards, Shailesh B. Davara -
How can I fix the INSPECTOR Tool? Clip duration is not working properly, it is very erratic. You type a number and a different one comes up on the clip.
Suddenly the iPhoto Camera browser in iMovie is not working properly either. Can not access my iPhotos to include them in iMovie project.Have you tried this?
From the "HOME" screen, go to "SETTINGS > PRIVACY > PHOTOS" and see if iMovie is listed in the "PHOTOS" page. If it is, then tap the iMovie switch to "ON"
Now your Videos & Photos should be accessible in the iMovie App. -
Scrolling effects in Muse are not working properly with the Chrome browser at the moment.
My scrolling effects in Muse are not working properly in the Chrome browser .I disabled any third party widgets to see if that was the problem but it wasn't. Safari and firefox presented my site perfectly but when it was opened in chrome the menu navigation bar will not stop moving uncontrollably jittering when the page is scrolled. Does anyone know what I can do to fix this? My site is danieltoruno01.businesscatalyst.com
We are using Vertical spry menu bar features provided with Dreamweaver CS3.
You are using Spry 1.4.
The latest version of the Adobe Spry Framework is 1.6.1, this is the same version that ships with Dreamweaver CS4.
When using Dreamweaver CS3 (uses Spry 1.4), it's wise to upgrade your files to the latest version. This can easily be done using the Spry Updater that can be found here.
If after that you still have problems, please come back here.
Ben -
Dear sir,
I'm using blackberry 9320.. Now the problem is facebook is not work properly in my web browser.. This problem is only for facebook site.. Other sites is work well.. When I open facebook my web browser is showing error like this ..( Destination could not be reached. (com.nokia.warlock.protocolstack.exceptions.UnresolvedHostException: http://m.facebook.com/)..
So pls help to solve this problem ..Try heading to this thread.
http://supportforums.blackberry.com/t5/BlackBerry-World/solution-on-isssues-with-Facebook-for-BlackB...
Good luck
Click " Like " if you want to Thank someone. If Problem is resolved accept it as a "Solution ", so that others can make use of it.
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it. -
Hello Team,
I have upgraded My leopard to Mountain lion 10.7 via snow leapeard. Now My itunes is not working properly nor I able to install google chrome successfully. Please help me in this occasion.
Also, I am not being able to upgrade Mac OS X 10.7 to 10.7.4 or letest for lion.
I am facing following messages when I open itunes ( I down loaded and install new for 10.7)
Process: iTunes [463]
Path: /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier: com.apple.iTunes
Version: 10.7 (10.7)
Build Info: iTunes-10702101~1
Code Type: X86-64 (Native)
Parent Process: launchd [273]
Date/Time: 2012-10-22 23:33:07.226 +0200
OS Version: Mac OS X 10.7 (11A390)
Report Version: 8
Interval Since Last Report: 4918 sec
Crashes Since Last Report: 2
Per-App Crashes Since Last Report: 2
Anonymous UUID: 3DE933E2-7A48-4840-91F4-7DC466ED9C26
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
@executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
Binary Images:
0x102a96000 - 0x103c36fff com.apple.iTunes (10.7 - 10.7) <0CC47E12-134F-A9E1-7E4F-3EAC797C3050> /Applications/iTunes.app/Contents/MacOS/iTunes
0x7fff62696000 - 0x7fff626cb1ff dyld (195 - ???) <71093406-21CF-3DBE-A001-802259ED5300> /usr/lib/dyld
Model: MacBook4,1, BootROM MB41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB, SMC 1.31f1
Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.5)
Bluetooth: Version 2.5.0b13, 2 service, 12 devices, 2 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHY2160BH, 160.04 GB
Parallel ATA Device: MATSHITADVD-R UJ-867
USB Device: Built-in iSight, apple_vendor_id, 0x8501, 0xfd400000 / 2
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52f, 0x1d100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8205, 0x1a100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x022a, 0x5d200000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
And Google chrome just keep loading the page for hours and nothing is appear on its browser. But safari and firefox working absolutly fine.
In addition, I have reboot computer as well but it never worked. Please help me in this occasion.
Eagerly waiting for your response on this issue.
Best Regards,You need to upgrade your copy of MS Office. You're using a version that is 8 years old (at least). You can buy Office 2011, which will work. You could also get a copy of Pages from the App Store, which is cheaper and will open Word files (though not perfectly). Or you could get a free Office clone, like OpenOffice or LibreOffice.
-
Anchor links to accordion panels not working properly across browsers
Hi everyone,
I need some help to figure out why my anchor links to specific accordion panels on another page are not working properly across browsers.
I have a Map page which has tooltips on mouseover on the site markers. 15 of the tooltips have "Click here for information" anchor links (although only 14 are currently linked) which, in theory, would take you to the Nurseries page where the specified accordion panel would be opened with the nursery entry appearing at the top of the new browser window.
Here are the links to the Map page and Nurseries page, respectively:
www.alegriadesignstudio.com/RFRI/map_v6.html
www.alegriadesignstudio.com/RFRI/nurseries_v6.html
I've tested the anchor links on IE, Firefox, Google Chrome, and Safari, and have received varying results. In most cases, the anchor links worked perfectly on two of the browsers, while on the other browsers, the correct accordion panel is opened but the nursery entry does not appear at the top of the new browser window. Anchor links using Safari and Google Chrome fared better (10 out of 14 links worked properly, and 8/14, respectively), whereas when using Firefox and IE, only 3 anchor links worked properly. The target audience for this website will be using IE and Firefox, so I would appreciate any help to figure out how to tweak the code so that the most, if not all, anchor links work properly on these two browsers in particular.
Here's an anchor link which worked perfectly in IE, GC, and Safari, but in FF, the entry did not appear at the top of the new browser window.
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?luzon=9#mangatarem
http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?luzon=9#mangatarem [To access the anchor link on the Map page, mouseover the third green dot from the top of the map (Tooltip--Location: Mangatarem) and then click on "Click here for information."]
Here's a sample anchor link in which the entry did not appear at the top of the new browser window in any of the 4 browsers:
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?mindanao=4#magpetAmabel
http://http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?mindanao=4#magpetAmabel [To access the anchor link on the Map page, go to "Mindanao" at the bottom of the map and mouseover the fourth green dot below the word "Mindanao" (Tooltip--LOCATION: Brgys. Amabel, Bongolanon, Imamaling, & Manobisa; Magpet; North Cotabato) and then click on "Click here for information."]
Here's a sample anchor link in which the anchor link worked properly in GC and Safari, but the entry didn't appear at the top of the browser window in IE and FF:
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?visayas=1#bilar
http://http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?visayas=1#bilar [To access the anchor link on the Map page, go to the small island north and a bit west of "Mindanao" which is called "Bohol" and mouseover the fourth green dot below the word "Mindanao" (Tooltip--LOCATION: Bilar; Bohol) and then click on the first "Click here for information."]
Many thanks in advance for your assistance!
JoyHi everyone,
I'm still trying to figure out how to resolve the problem of anchor links to accordion panels not working properly across browsers (see original post for details). I would greatly appreciate any suggestions on how to resolve the problem.
Many thanks in advance.
Joy -
Adobe is not working properly not able to view videos or games
adobe flash player not working properly and not able to view videos or games
Welcome to the Adobe Forums.
The more information you supply about your situation, the better equipped other community members will be to answer. Please supply the following Information that you haven’t already (where applicable):
• Adobe product and version number
• Operating system and version number
• Browser and version number (where applicable)
• The full text of any error message(s)
• What you were doing when the problem occurred
• Screenshots of the problem (if possible)
• Computer hardware, such as CPU; GPU; amount of RAM; etc. -
Some browser links not working - any browser, but just on my mac
I have a strange issue. Over the last while certain page links on browser pages (which seem to be Java script links) won't work in any of my 5 browsers. If I put the same page in to any of my laptop's or my wife's browsers, the links work fine.
For example, I just tried to order some stuff via Staples, and whenever I tried to go to the next screen via a button, nothing happened. Even if I switched User Agents in Safari or Firefox, the "next" button didn't work. Same in Chrome, Camino, Flock and Opera on the same pages. I have noticed lots of drop down menus are not working properly either on many sites.
I figure some bit of OS code must be either blocking or misreading the instruction, but what?
Any ideas? Any input would be greatly appreciated!!errmm... i'm not sure why you are fiddling with java and system extensions...
java has nothing to do with javascript despite the name (you can blame sun for that) the javascript engine is an integral part of the browser not a separate extension.
Java on the other hand is an entirely separate entity and language that is independent of any one browser and is installed on the OS.
Javascript is commonly used in webpages (all most all these days) where as java is hardly used at all and is usually confined to little "applets" that run separately from the rest of the page.
If you suspect that it is something to do with your settings/preferences in your library then the easiest way to find out is by creating a new User account (go to system preferences> users> and add a user.) Then log into that account and try the browsers in there.
If you really think that it has something to do with system extensions then you can disable them by moving them out of the extensions directory (/System/Library/Extensions/) However i must stress that unless you know what you are doing and know what the extension does that you are moving to not do so... you can easily render your system unbootable if you move the wrong extension... unless you have installed a 3rd party system extension there shouldn't be anything in that directory that isn't meant to be there (this is a very different system from OS 9).
However there are internet plugins that may be interfering with your browsers, you can find these in /Library/Internet Plugins/ you can disable these by moving them also... the defaults are various flash, java, shockwave, quartz and quicktime files.
Message was edited by: Thomas Brierley -
SWF file not working properly in Explorer
I have made a kind of slide show showing jpg images loaded
from the web in an swf file, and it will not work properly. It is
my first .swf application, and I am using the free downloadable
FlashObject.js to load the swf into the browser. The problem is
that it sometimes loads perfectly, while other times it will not
work at all! It is not the paths, because I have tried setting the
images in the same directory as the swf, and not importing the
image names thru flashVars. What drives me mad is that it works
consistently in Explorer, the first time I load it, and the first
time after I have cleared the temporary internet files. Otherwise
it will not load at all. In Firefox however, if randomly fails to
load about one time out of ten or something like that. The code is
compiled using the free downloadable compiler. Anyone have any idea
what may be wrong?I may be late but better late then...
Not true
You can nest hundreds of layers as long as all symbols are graphics.
People try to use a Movie symbol and this is script executed.
I am animator on cartoon all done in flash and we have dozens or more NESTS!!!!
Eyes inside of head inside of Character in car on stage...
many
Trick to not crashing is in FLASH
Set publish settings to FLASH 8.
Never use FLASH 9 with Actionsscript 3... This adds a lot of instability.
1 of these swfs in a project could kill it.
I render SWF at 30fps at 1920x1080 then into AE, then scale down to SD wide screen resolution 720x480 16x9.. set scale to 45.5 x 44.5 percent.
I output final animation at Quicktime ANIMATION 100 millions of colors... 1.21 (16x9)audio added at 48k
I have hundreds of hours trying to make this work reliably and finally I got the mix.
Then I take QT to Premiere for final edit, audio and titles.
Good luck
NATMAX
Maybe you are looking for
-
I wonder if anyone can give me some help with my problem? When I try and search my "search iPhone" nothing comes up atall! Wen I used to type in anything,a letter or phrase some suggestions came up but I'm not getting this now! Wen I type in the box
-
How can I see personal folder in My Folders on com...
Hello All, I have an N95 8gb with 30.0.1.18 FW. I have the latest PC suite and Ovi suite installed on Windows Vista 32-bit. I have a few personal folders on my phone's messaging in the My Folder section. I have never been able to see those folders on
-
Escape ' ' while creating a collection in Oracle APEX
Hi all I am creating a collection where I am using substr and instr functions and it does give an error message as below • ORA-06550: line 14, column 79: PLS-00103: Encountered the symbol ", -1)) OWSR, null PRIM_ADD , null PRIMA" when expecting one o
-
How to make Bluetooth keyboard work?
Firstly, I have spent over an hour reading this, that and the other. Nothing seems to make it work. It did work. For a while. Now it just seems to spontaneously decide to stop accepting input. Or sending keys. Or whatever the issue is. 0. The batteri
-
HT4009 How do I see what in app purchases I have made
I ant upgrade or download anything because of a past purchase I didn't make