ADF Table with browser zoom not working properly

Hi All,
I am using ADF Table to show data from database. I am using JDeveloper 11.1.1.4.0.
When user uses browser zoom functions (i.e. Ctrl + or Ctrl -) for zoom in or zoom out, The UI of Table disturbed and columns are not in line.
Here is the snapshot of disturbed table image http://i.imgur.com/07YfB.jpg
I have tested it with Firefox and Internet Explorer and in both the cases if you zoom in the columns are not in line anymore.
I have added *<accessibility-profile>large-fonts</accessibility-profile> into trinidad-config.xml* and
tried but it gives me the same result.( Reference Oracle Docs http://docs.oracle.com/cd/E16162_01/web.1112/e16181/af_access.htm#BEIDFIIB )
Can anyone suggest solution for how to solve this problem so that the columns will be is line when uses browser's zoom?
Thanks in advance,
Viral

Hi,
I am not using any kind of css for table.
It is default skin and defalut table properties that ADF provides.
- Viral

Similar Messages

Browser is not working properly

default browser is not working properly .....
closed on few second !!!!!!!
what the solution?

Hi and Welcome to the Community!
Anytime random strange behavior or sluggishness shows up, the first thing to try is a proper reboot:
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. If this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Adf table with detail stamp , not able to close the detail stamp

Hi
i'm using 11g adf jdeveloper.
I'm using adf table to display records of XXXVO.In table i have used detail stamp, in which i have drag XXXVO read-only form and used a ADD button which call a pop-up with createInsert of the XXXVO form with submit button.In pop i have used a drop downlist of other YYYVO. I have used another button Edit which call the same pop-up, using show pop-up.
Issue is when i run the application i can open the detail stamp and close but i couldn't get the selected record on the table in edit mode pop up. if i give partial trigger in pop-up of table id . den i'm getting the selected record in edit pop up. but detail stamp is not working .
Here is the code .......
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1">
<af:messages id="m1"/>
<af:form id="f1">
<af:pageTemplate viewId="/XBBaseTemplate.jspx"
value="#{bindings.pageTemplateBinding}" id="pt1">
<f:facet name="body">
<af:panelBox text="AMC Charges" id="pb1">
<f:facet name="toolbar"/>
<af:panelGroupLayout layout="scroll" id="pgl1">
<af:panelCollection id="pc1"
inlineStyle="width:1105px; height:336px;">
<f:facet name="menus">
<af:menu text="Export Excel" id="m2">
<af:commandMenuItem text="Excel" id="cmi1">
<af:exportCollectionActionListener exportedId="resId1"
type="excelHTML"/>
</af:commandMenuItem>
</af:menu>
</f:facet>
<f:facet name="toolbar">
<af:toolbar id="t1">
<af:commandToolbarButton id="ctb1"
icon="/Images/browse.gif"
shortDesc="Search"
partialTriggers="resId1"
disabled="#{UsapProgramPrivilege.query}">
<af:showPopupBehavior popupId=":::p2"/>
</af:commandToolbarButton>
<af:commandToolbarButton id="ctb_add"
icon="/Images/addsymbol.png"
shortDesc="Add"
action="#{MasterManagedBean.createRecord}"
useWindow="true"
windowModalityType="applicationModal"
windowHeight="300"
windowWidth="300"
disabled="#{UsapProgramPrivilege.insert}"/>
<af:commandToolbarButton
id="ctb2"
partialTriggers="resId1"
icon="/Images/update_ena.png">
<af:showPopupBehavior popupId=":::p_edit"/>
</af:commandToolbarButton>
<af:commandToolbarButton id="ctb_delete"
icon="/Images/delete_ena.png"
shortDesc="Delete"
partialTriggers="resId1"
actionListener="#{bindings.Delete.execute}"
disabled="#{UsapProgramPrivilege.delete}"/>
<af:commandToolbarButton id="ctb3"
icon="/Images/filesave.png"
shortDesc="Save"
partialTriggers="resId1 ctb_add ctb_delete :::cb1"
actionListener="#{bindings.Commit.execute}"
disabled="#{!bindings.Commit.enabled}"/>
<af:commandToolbarButton id="ctb5" icon="/Images/undo.png"
actionListener="#{bindings.Rollback.execute}"
disabled="#{!bindings.Rollback.enabled}"
immediate="true">
<af:resetActionListener/>
</af:commandToolbarButton>
<af:commandToolbarButton id="ctb4"
icon="/Images/eraser-4.gif"
shortDesc="Clear"
action="#{MasterManagedBean.onClearTableSearchFields}"/>
<af:outputText value="CmmAmcRatesVO1Iterator"
id="ot_amciterator"
binding="#{MasterManagedBean.iteratorName}"
visible="false"/>
</af:toolbar>
</f:facet>
<f:facet name="statusbar"/>
<af:table value="#{bindings.CmmAmcRatesVO1.collectionModel}"
var="row"
rows="#{bindings.CmmAmcRatesVO1.rangeSize}"
emptyText="#{bindings.CmmAmcRatesVO1.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.CmmAmcRatesVO1.rangeSize}"
rowBandingInterval="0"
filterModel="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}"
filterVisible="true" varStatus="vs"
selectedRowKeys="#{bindings.CmmAmcRatesVO1.collectionModel.selectedRow}"
selectionListener="#{bindings.CmmAmcRatesVO1.collectionModel.makeCurrent}"
rowSelection="single" id="resId1"
binding="#{MasterManagedBean.masterTable}"
styleClass="hieght:100% width:100%"
columnSelection="multiple" width="1099"
rowDisclosureListener="#{MasterManagedBean.onRowDiscloseureEvent}"
partialTriggers="::ctb_add ::ctb_delete ::::cb1">
<af:column sortProperty="AmrtPrdId" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtPrdId.label}"
id="resId1c1">
<af:outputText value="#{row.AmrtPrdId}" id="ot8"/>
</af:column>
<af:column sortProperty="AmrtFeeId" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtFeeId.label}"
id="resId1c2">
<af:outputText value="#{row.AmrtFeeId}" id="ot7"/>
</af:column>
<af:column sortProperty="AmrtRateTyp" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtRateTyp.label}"
id="resId1c3">
<af:outputText value="#{row.AmrtRateTyp}" id="ot11"/>
</af:column>
<af:column sortProperty="AmrtFxdAmt" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtFxdAmt.label}"
id="resId1c4">
<af:outputText value="#{row.AmrtFxdAmt}" id="ot3">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtFxdAmt.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="AmrtPerc" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtPerc.label}"
id="resId1c5">
<af:outputText value="#{row.AmrtPerc}" id="ot4">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtPerc.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="AmrtMinAmt" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtMinAmt.label}"
id="resId1c6">
<af:outputText value="#{row.AmrtMinAmt}" id="ot2">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtMinAmt.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="AmrtMaxAmt" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtMaxAmt.label}"
id="resId1c7">
<af:outputText value="#{row.AmrtMaxAmt}" id="ot9">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtMaxAmt.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="AmrtFolioId" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtFolioId.label}"
id="resId1c8">
<af:outputText value="#{row.AmrtFolioId}" id="ot1"/>
</af:column>
<af:column sortProperty="AmrtCurrId" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtCurrId.label}"
id="resId1c9">
<af:outputText value="#{row.AmrtCurrId}" id="ot10"/>
</af:column>
<af:column sortProperty="AmrtRndMthd" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtRndMthd.label}"
id="resId1c10">
<af:outputText value="#{row.AmrtRndMthd}" id="ot14"/>
</af:column>
<af:column sortProperty="AmrtDecPlc" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtDecPlc.label}"
id="resId1c11">
<af:outputText value="#{row.AmrtDecPlc}" id="ot5">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtDecPlc.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="AmrtActiveYn" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtActiveYn.label}"
id="resId1c12">
<af:outputText value="#{row.AmrtActiveYn}" id="ot13"/>
</af:column>
<af:column sortProperty="AmrtHoldYn" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtHoldYn.label}"
id="resId1c13">
<af:outputText value="#{row.AmrtHoldYn}" id="ot12"/>
</af:column>
<af:column sortProperty="AmrtEffFdate" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtEffFdate.label}"
id="resId1c14">
<f:facet name="filter">
<af:inputDate value="#{vs.filterCriteria.AmrtEffFdate}"
id="id1"/>
</f:facet>
<af:outputText value="#{row.AmrtEffFdate}" id="ot6">
<af:convertDateTime pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtEffFdate.format}"/>
</af:outputText>
</af:column>
<f:facet name="detailStamp">
<af:panelFormLayout id="pfl2" rows="9">
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtPrdId.label}"
id="plam10">
<af:outputText value="#{row.AmrtPrdId}" id="ot31"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtFeeId.label}"
id="plam17">
<af:outputText value="#{row.AmrtFeeId}" id="ot20"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtRateTyp.label}"
id="plam11">
<af:outputText value="#{row.AmrtRateTyp}" id="ot28"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtFxdAmt.label}"
id="plam18">
<af:outputText value="#{row.AmrtFxdAmt}" id="ot16">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtFxdAmt.format}"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtPerc.label}"
id="plam14">
<af:outputText value="#{row.AmrtPerc}" id="ot30">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtPerc.format}"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtMinAmt.label}"
id="plam1">
<af:outputText value="#{row.AmrtMinAmt}" id="ot22">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtMinAmt.format}"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtMaxAmt.label}"
id="plam13">
<af:outputText value="#{row.AmrtMaxAmt}" id="ot18">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtMaxAmt.format}"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtFolioId.label}"
id="plam7">
<af:outputText value="#{row.AmrtFolioId}" id="ot27"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtCurrId.label}"
id="plam4">
<af:outputText value="#{row.AmrtCurrId}" id="ot26"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtRndMthd.label}"
id="plam6">
<af:outputText value="#{row.AmrtRndMthd}" id="ot25"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtDecPlc.label}"
id="plam12">
<af:outputText value="#{row.AmrtDecPlc}" id="ot21">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtDecPlc.format}"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtActiveYn.label}"
id="plam2">
<af:outputText value="#{row.AmrtActiveYn}" id="ot32">
<f:converter converterId="CharYNAsString"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtHoldYn.label}"
id="plam8">
<af:outputText value="#{row.AmrtHoldYn}" id="ot24">
<f:converter converterId="CharYNAsString"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtEffFdate.label}"
id="plam15">
<af:outputText value="#{row.AmrtEffFdate}" id="ot23">
<af:convertDateTime pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtEffFdate.format}"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.FeeDescription.label}"
id="plam16">
<af:outputText value="#{row.FeeDescription}"
id="ot29"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.FolioDescription.label}"
id="plam9">
<af:outputText value="#{row.FolioDescription}"
id="ot17"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.ProductDescription.label}"
id="plam3">
<af:outputText value="#{row.ProductDescription}"
id="ot19"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.CurrencyDescription.label}"
id="plam5">
<af:outputText value="#{row.CurrencyDescription}"
id="ot15"/>
</af:panelLabelAndMessage>
</af:panelFormLayout>
</f:facet>
</af:table>
</af:panelCollection>
</af:panelGroupLayout>
</af:panelBox>
</f:facet>
<f:facet name="first">
<af:panelStretchLayout id="psl3" startWidth="39px">
<f:facet name="bottom"/>
<f:facet name="center"/>
<f:facet name="start"/>
<f:facet name="end"/>
<f:facet name="top"/>
</af:panelStretchLayout>
</f:facet>
<f:facet name="top"/>
<f:facet name="Bticker"/>
</af:pageTemplate>
<af:popup id="p2">
<af:panelWindow id="pw1">
<af:panelGroupLayout id="pgl2">
<af:panelHeader text="AMC Rates" id="ph1">
<af:query id="qryId1" headerText="Search" disclosed="true"
value="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
model="#{bindings.ImplicitViewCriteriaQuery.queryModel}"
queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}"
queryOperationListener="#{bindings.ImplicitViewCriteriaQuery.processQueryOperation}"
resultComponentId="::pt1:pc1:resId1"
displayMode="compact"
/>
</af:panelHeader>
</af:panelGroupLayout>
</af:panelWindow>
</af:popup>
<af:popup id="p_edit" popupCanceledListener="#{MasterManagedBean.resetPopTitle}"
partialTriggers="pt1:pc1:resId1">
<af:panelWindow id="pw2" inlineStyle="width:600px; height:600.0px;"
title="Edit"
binding="#{MasterManagedBean.masterPenalWindow}">
<af:panelGroupLayout id="pgl3">
<af:panelFormLayout id="pfl4" rows="2" maxColumns="2">
<af:inputListOfValues id="amrtFeeIdId"
popupTitle="Search and Select: #{bindings.AmrtFeeId.hints.label}"
value="#{bindings.AmrtFeeId.inputValue}"
label="#{bindings.AmrtFeeId.hints.label}"
model="#{bindings.AmrtFeeId.listOfValuesModel}"
required="#{bindings.AmrtFeeId.hints.mandatory}"
columns="#{bindings.AmrtFeeId.hints.displayWidth}"
shortDesc="#{bindings.AmrtFeeId.hints.tooltip}">
<f:validator binding="#{bindings.AmrtFeeId.validator}"/>
</af:inputListOfValues>
<af:inputListOfValues id="amrtPrdIdId"
popupTitle="Search and Select: #{bindings.AmrtPrdId.hints.label}"
value="#{bindings.AmrtPrdId.inputValue}"
label="#{bindings.AmrtPrdId.hints.label}"
model="#{bindings.AmrtPrdId.listOfValuesModel}"
required="#{bindings.AmrtPrdId.hints.mandatory}"
columns="#{bindings.AmrtPrdId.hints.displayWidth}"
shortDesc="#{bindings.AmrtPrdId.hints.tooltip}">
<f:validator binding="#{bindings.AmrtPrdId.validator}"/>
</af:inputListOfValues>
<af:inputText value="#{bindings.FeeDescription.inputValue}"
required="#{bindings.FeeDescription.hints.mandatory}"
columns="#{bindings.FeeDescription.hints.displayWidth}"
maximumLength="#{bindings.FeeDescription.hints.precision}"
shortDesc="#{bindings.FeeDescription.hints.tooltip}"
partialTriggers="amrtFeeIdId" id="it10"
readOnly="true">
<f:validator binding="#{bindings.FeeDescription.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.ProductDescription.inputValue}"
required="#{bindings.ProductDescription.hints.mandatory}"
columns="#{bindings.ProductDescription.hints.displayWidth}"
maximumLength="#{bindings.ProductDescription.hints.precision}"
shortDesc="#{bindings.ProductDescription.hints.tooltip}"
partialTriggers="amrtPrdIdId" id="it7"
readOnly="true">
<f:validator binding="#{bindings.ProductDescription.validator}"/>
</af:inputText>
</af:panelFormLayout>
<af:panelFormLayout id="pfl6" rows="2" maxColumns="2">
<af:inputListOfValues id="amrtFolioIdId"
popupTitle="Search and Select: #{bindings.AmrtFolioId.hints.label}"
value="#{bindings.AmrtFolioId.inputValue}"
label="#{bindings.AmrtFolioId.hints.label}"
model="#{bindings.AmrtFolioId.listOfValuesModel}"
required="#{bindings.AmrtFolioId.hints.mandatory}"
columns="#{bindings.AmrtFolioId.hints.displayWidth}"
shortDesc="#{bindings.AmrtFolioId.hints.tooltip}">
<f:validator binding="#{bindings.AmrtFolioId.validator}"/>
</af:inputListOfValues>
<af:inputListOfValues id="amrtCurrIdId"
popupTitle="Search and Select: #{bindings.AmrtCurrId.hints.label}"
value="#{bindings.AmrtCurrId.inputValue}"
label="#{bindings.AmrtCurrId.hints.label}"
model="#{bindings.AmrtCurrId.listOfValuesModel}"
required="#{bindings.AmrtCurrId.hints.mandatory}"
columns="#{bindings.AmrtCurrId.hints.displayWidth}"
shortDesc="#{bindings.AmrtCurrId.hints.tooltip}">
<f:validator binding="#{bindings.AmrtCurrId.validator}"/>
</af:inputListOfValues>
<af:inputText value="#{bindings.FolioDescription.inputValue}"
required="#{bindings.FolioDescription.hints.mandatory}"
columns="#{bindings.FolioDescription.hints.displayWidth}"
maximumLength="#{bindings.FolioDescription.hints.precision}"
shortDesc="#{bindings.FolioDescription.hints.tooltip}"
partialTriggers="amrtFolioIdId" id="it9"
readOnly="true">
<f:validator binding="#{bindings.FolioDescription.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.CurrencyDescription.inputValue}"
required="#{bindings.CurrencyDescription.hints.mandatory}"
columns="#{bindings.CurrencyDescription.hints.displayWidth}"
maximumLength="#{bindings.CurrencyDescription.hints.precision}"
shortDesc="#{bindings.CurrencyDescription.hints.tooltip}"
partialTriggers="amrtCurrIdId" id="it3"
readOnly="true">
<f:validator binding="#{bindings.CurrencyDescription.validator}"/>
</af:inputText>
</af:panelFormLayout>
<af:panelFormLayout id="pfl1" rows="5" fieldWidth="150">
<af:selectOneChoice value="#{bindings.AmrtRateTyp.inputValue}"
label="#{bindings.AmrtRateTyp.label}"
required="#{bindings.AmrtRateTyp.hints.mandatory}"
shortDesc="#{bindings.AmrtRateTyp.hints.tooltip}"
id="soc1">
<f:selectItems value="#{bindings.AmrtRateTyp.items}"
id="si1"/>
</af:selectOneChoice>
<af:inputText value="#{bindings.AmrtFxdAmt.inputValue}"
label="#{bindings.AmrtFxdAmt.hints.label}"
required="#{bindings.AmrtFxdAmt.hints.mandatory}"
columns="#{bindings.AmrtFxdAmt.hints.displayWidth}"

See if this helps:
http://blogs.oracle.com/shay/2010/03/popup_details_for_a_table_reco.html

Pinch to zoom not working properly in Safari 5.1

I have OS X 10.6.8 (downloading lion as i type). I updated safari this morning and ever since I did that, pinch to zoom isnt working right. I can pinch to zoom in, to a certain extent but I can not get as large as I want as I used to and I cannot zoom back out at all. It seems to be working properly in my other apps so I guess it's something in safari. I'm not very Mac savvy since everything usually works and I dont have to be, so maybe I'm missing something? Help! I use this feature CONSTANTLY and desperately want it back. Thanks in advance!

Same here.
MBP Late 2007 with Magic Trackpad
OSX 10.6.8
Safari 5.1 (6534.50)
I could zoom in once and then it wouldn't work anymore by using the pinching on the Magic Trackpad.
Pressing Command and +/- still worked.
I deleted Safari 5.1 and reinstalled the Combo Update to get 5.0.5 back and it worked properly again.
Then I installed 5.1 another time and had the same error again.
I guess I got to roll back to 5.0.5

First time working with 802.11n, not working properly?

Hello,
This is the first time I use 802.11n in my network there is only one AP1141 but the clients don't connect at 802.11n rates, instead they connect at data rates as low as 11 Mbps. At the begining they connect at 144 Mbps but immidiatly it decreases to 11 or 12.
Many of our wireless clients in the company are Intel(R) WiFi Link 5100 AGN.
Any comments?
AIR-AP1141N-A-K9
AIR-WLC2106-K9
6.0.182.0
Let me know if more info needed?
Thanks

Hi George,
So you suggest to keep only WPA2/AES?
Regarding the coverage area keep in mind this is a really small 4 floor building with an AP floor floor, I installed only one AP1141 in my floor and kept the AP1131 in the other 3 floors, I might reduce the power to half since I don't need them working at full power unless I need coverage in the stairs in order to enforce roaming to IPPhones. Also, I don't want to bond channels on 2.4 because I read that as a recomendation in a Cisco's document (anyways I did not find how to do it in 2.4, wuld be a nice tip if you tell me how just in case) so 144 Mbps would be great as long as it works properly. I did not experienced these rate hoping until I enabled this AP1141.
And yes most of the clients that reported issues are Intel (engineering team, haven't checked the rest yet).
Regards!

Ios7.0.1 bluetooth connectivty with car stereo not working properly?

I have updated my Iphone to Ios7.0.1 Before this update connection between my Iphone and car stereo was not an issue.
Now the only way to play music through this device is to use the iphone. Select track, volume, Etc the hands free buttons on the sterring wheel do not work. I think you will agree this is not acceptable, convenient , or safe to drive. However the phone call option is working perfectly as before. My vehicle is a 6 month old Jaguar XF I have contacted them and they have inspected my car and have assured me the problem is not with my car audio equipment.
I am a little reticent to do a factory reset on my iphone until all avenues of trouble shooting have been exhausted.
Can anyone help, advise, or even been experiencing the same problem/

I have a similar problem with my XF. I upgraded to 7.0.2 and deleted all my paired devices in the car and on my phone.
I reapired the phone and all seemed fine - I could happily make/receive calls. However the phone will NOT connect to the audio part of the XF and will not play any music or connect via Bluetooth to Audio. I can see the phone and try and connect but I get the message that the Audio connection has failed. The phone continues to work normally through the phone setup.
Previously you could effectively connect a device as a phone and a device as an audio device (or the same device to both phone and audio) but this is no longer possible with IOS7 it seems. My wife and my son also have iphones upgraded to IOS7 and they cannot connect to audio either.
I have tried rebooted, resetting, deleting all settings etc, etc but I am having no luck.
ANy further help greatfully received. My XF is a 63 plate and just over a month old.

SQL command (with XPath) does not work properly with JSP

Hello everyone,
I try this SQL command on Oracle SQL Developer,
select filename,
extract(xml_col, '/Operation/Records/tabDetail/Vehicle_Level/text()') as Vehicle_Level,
extract(xml_col, '/Operation/Records/tabDetail/Vehicles_Closed/text()') as Vehicles_ID
from ope
where upload_datetime in
(select min(upload_datetime)
from ope
where (TO_DATE(TO_CHAR(upload_datetime, 'DD-MM-YYYY'),'DD-MM-YYYY'))
between TO_DATE('01-01-2008','DD-MM-YYYY') and TO_DATE('01-07-2008','DD-MM-YYYY')
HAVING (filename like '60-1-%')
GROUP BY filename);
It works properly, the result is :
FILENAME --------------------- VEHICLE_LEVEL --------------------- VEHICLES_ID
60-1-OPE-1.xml --------------------- 3 --------------------- 60-1-VEH-43
But when I try this command on JSP, the result is :
FILENAME --------------------- VEHICLE_LEVEL --------------------- VEHICLES_ID
60-1-OPE-1.xml --------------------- null --------------------- null
I don't want "null" value, but I don't know where is wrong. Please help me.
Thank you very much.
Orange Jasmin

If you know that the videos and music have been working before and that the ID3 tags are correct I suggest that you try to reinstall the phone software using Update Service.
http://www.sonymobile.com/gb/tools/update-service/
Let me know if these problems remains after reinstall.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Acer Liquid E700 problem with headphone jack, not working properly.

Here I am again, what a surprise! Reporting another problem with my 2 month old ACER LIQUID E700. Now the problem is, the headphone jack isnt working properly. When I watch movies, or play music with a headphone or earphone, the dialogue or conversations during movies , or the lyrics sang when playing music, can barely be heard. Also , everytime I connect my earphone it the E700, theres a fast ticking sound, which is faint but you can really hear it, and thats when I realized something was wrong. P.S This phone was never dropped or gotten wet. Im really starting to regret buying an acer phone.Any acer representatives out there who know whats going on?

Well airstrike2014, I do know how it happened to me, it's weird but definitely how it happened, so I was downloading a electrical razor app to scare my friends (I know, it's stupid, but anyway) and the app works by vibrating at full power and playing a electric razor sound, but it would only vibrate (and the app description said that it would make some sounds too) and I tried maxing out my sound but there was really no way to make it play any sounds. I got tired of it 5 mins later and uninstalled thinking the problem was in the app or something, but I go watch a YouTube video right after and no sound was coming out either, even with the volume maxed out and with headphones, so I restart my phone, now sounds play perfectly when there aren't any headphones plugged in but when there are, it now happens what you described there, a tick sound lasting the first few seconds the headphones are plugged in and if I try to play any media it happens that "instrumental effect", other heaphones do the same, so it's obviously the phone.I mean, is it really possible that some kind of problem occurred while trying to vibrate and play sound at the same time? Well it was for me, the phone was fine until then.Sorry for the boringly long post haha

Onclick Open Browser Window not working properly in IE

I am having one last problem with my site. Everything works just fine in Firefox, but not in IE. In IE the browser window is wider than the image. On each thumbnail there's an image map with the following coding:
<div id="bead1"><img src="images/t_bead1border.jpg" alt="bead 1" width="74" height="108" border="0" usemap="#Map" />
<map name="Map" id="Map">
<area shape="rect" coords="-24,-10,106,143" href="javascript:void()" onclick="MM_openBrWindow('gallery_bead1.html','','width=225,height=360')" />
</map></div>
Here's a link to the site:
http://www.susieharperdesigns.com/gallery_beads.html
Any help is greatly appreciated, thanks.

Old Shoe wrote:
Here's my link: http://www.progressity.com/GW
On the John Calipari testimonial link a browser window pops up and plays fine in FF. In IE the window pops up but the main page changes too.
i tested in my window operating system computer, works fine , didnt see any changes

My Safari browser is not working properly. Any suggestions?

When I access my online banking site. I can no longer view and pay bills. Each time I click on that option, the browser goes right back to the opening login screen. I have tried a different account and the same thing occurs. This started after I clicked on an option to remove the enhanced login (quicker access). I can use a different browser like Chrome and it works fine. Something has flipped a switch in my Safari browser. I tried reseting, deleting all cookies, and emptying the cache to no avail. Any suggestions?

Removed all website data. Didn't make a difference.
I am having the same problem on my Mac Pro. My old G4 tower running 10.5.8 has no issue.
Here is the error being generated:
3Unsafe JavaScript attempt to access frame with URL https://bankname.billdomain.com/BankName/SignOn from frame with URL https://www.bankname.com/olb/billpay/billPaymentsSso. Domains, protocols and ports must match.
(I have inserted the generic BANKNAME for the real bank name)
I'm no rocket surgeon but it looks to me like the bank code weenies are writing some crappy code.
I have had the same results with Chrome, Firefox and SAfari

Why my music application in iphone 4 with IOS 5 not working properly??

I have Updated mine to IOS 5 and my songs are not playing pproperly from the new Music App. They are syncing properly but not playing some songs,skipping some songs and showing one song but playing another.. Its annoying..Please help me.. Thanks
Harish,..

Hi all.
Possible fix:
Had this annoying issue, or similar. Songs on my iphone 4 would skip untilit found a song it could play, but often left up on the screen a different song to the one playing. It appeared songs hadnt been transferred or were missing causingthe phone to skip the songs.
I heard that if you get a 'weird' beep noise this is the 'shake to shuffle' feature which can be turned off via Settings>Music.
If you have a similar issue to mine, I read converting to AAC (right click song in Itunes and choose 'convert to AAC) could work, and did for me, but is time consuming and duplicates the song.
What worked for me? Turning off 'convert higher bit rate songs to 128 kbps AAC' on the Devices>Your Iphone main menu (device summary page). This reloads all songs to the iphone and appears to fix the issue. I have checked a few songs I knew had issues and they now work, and I can get through 10+ shuffle songs (thats as many as I checked) without a skip.
Good luck. Let me know if it works.

Flv with player skin not working properly

When I place a flv into a flash movie and apply a skin and
publish everything, it works fine on my local machine, but when
uploaded to a server the player skin will not show up, yet the flv
shows up and begins playing. Has anyone encountered this before? Is
there a way to embed the skin in the swf instead of having it be
external?
Thanks in advance.

For anyone else having this problem and arriving at this page from a search, the issue is most likely due to the way Flash loads in content. When just viewing locally, in the Flash Player, runtime-loaded content will be retrieved relative to the .swf's directory.
In a browser, however, the Flash Player looks for content relative to the location of the HTML page holding the .swf, and not the directory of the .swf itself.
One (arguably dirty) way of resolving this is to move your skin.swf to the directory of the HTML page holding the .swf; like so:
Previous setup:
/index.html
/swfs/main.swf
/swfs/skin.swf
Resolved set up:
/index.html
/swfs/main.swf
/skin.swf
Another way would be to change the skin location parameter of the FLV player component inside Flash pro. But that is likely to break local playback. I'd love to hear of a more elegant solution to this issue.

Single task flow with multiple tabs not working properly in UIShell

Hi,
I am using the UIShell Dynamic tabs concept. Here am creating the task flow with a fragment which am binding to the backing bean. if am trying to open the same task flow in two tabs.the getter of backing bean are calling for both tabs when am opening the second tab.
Please provide me any solution or why backing bean getter is firing for the first tab even i opened the second tab.
Reg,
Brahma B.

There are a few problems that I have noticed so far.
Line #1 <!doctype html5> is not recognised, hence the page will revert back to HTML 4.01 Transitoinal. It should read <!doctype html>
Line #51 (links to) style rules should be placed in the <head> element, not in the <body> element
Lines #124, #159 and #188 all link to the same JS file. Delete two of them.
Lines #126, #161 and #207 contain a constructor for the same widget. The former two should be deleted.
Lines #190 and #208 contain a constructor for the same widget. The former should be deleted
Although JS can be placed anywhere in a document, I tend to place all JS at the bottom, just above the ending body tag (</body>) unless the JS is required for rendering purposes in which case it should be placed where it is required. This way, you can keep check of what you have linked to and which constructors you have created thus eliminating the problems mentioned above.
Also you might like to have a look at a collapsible panel group http://labs.adobe.com/technologies/spry/samples/collapsiblepanel/CollapsiblePanelGroupSamp le.html. This will simplify the code somewhat.
Gramps

How can I get help with an app not working properly?

I just bought a 'learn Gujarati' app and the sound is so low I can hardly hear it even with the sound control on the iPad turned up as high as it would go. I have only had the iPad a few months - present from children, and I LOVE it and want to make most of it, thanks, Chrissy

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

Menu bar with rollover states not working properly

I have a menu bar that I want to have as a certain size. The
menu items that actually link somewhere are not showing up as the
designated size (150x50px) but the one link that is not linked to
somewhere else in the page looks fine (inventory).
Can someone look at the css and tell me if there is something
contradicting or if there is something I can do?
THank you
You can view the problem page at
http://thebradfordcreativegroup.com/abs/indexold.html

Sorry, I don't have the answers - but you need to see your
site in IE6. It
looks quite different - kind of bloated. Also, the "Quality"
link doesn't
have an arrow.
"Inventory" as you say sits up at the top. FF is fine. Sorry
I can't help
though.
Jo
"joshuataylordesign" <[email protected]>
wrote in message
news:fqia5f$anb$[email protected]..
>I have a menu bar that I want to have as a certain size.
The menu items
>that
> actually link somewhere are not showing up as the
designated size
> (150x50px)
> but the one link that is not linked to somewhere else in
the page looks
> fine
> (inventory).
> Can someone look at the css and tell me if there is
something
> contradicting or
> if there is something I can do?
> THank you
> You can view the problem page at
>
http://thebradfordcreativegroup.com/abs/indexold.html
>

ADF Table with browser zoom not working properly

Similar Messages

Maybe you are looking for